-
-
3.7v Lipo Battery A lithium polymer battery, or more correctly lithium-ion polymer battery (abbreviated as LiPo, LIP, Li-poly, lithium-poly and others), is a rechargeable battery of lithium-ion technology using a polymer electrolyte instead of a liquid one.
-
350 mAh rating high discharge LiPo battery.
-
500mAh rating high discharge LiPo battery.
-
800mAh rating high discharge LiPo battery
-
2 Pin Crimp Shell Wire | Straight Connector PAIR
Original price was: ₨55.00.₨29.00Current price is: ₨29.00. Quick ViewThis is a simple two wire cable. Great for jumping from board to board or just about anything else.
-
2 Pin Terminal Block Male/Female
Original price was: ₨49.00.₨39.00Current price is: ₨39.00. Quick ViewBuy low price, high quality 2 Position Terminal Block.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Resistance: 2K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
2.4 TFT LCD Shield For Arduino UNO R3 (ILI9340)
Original price was: ₨2,500.00.₨1,999.00Current price is: ₨1,999.00. Quick ViewThe 2.4 inch TFT touch Screen LCD Module For Arduino is a beautiful large touchscreen display shield with built in microSD card connection. The LCD has excellent vivid color contrast. This TFT display is big (2.4 diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades). 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. This display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
-
2.54MM 1*40 PIN FEMALE DOUBLE ROW HEADER STRIP
Original price was: ₨70.00.₨55.00Current price is: ₨55.00. Quick ViewSingle row of 40-holes, Female Header Strip. Can be cut to size with a pair of wire-cutters. Standard .1″ spacing. We use them extensively in the Olimex development boards. They mate very well with break away male headers.
-
2.5inch 12V DC Fan Cooling Fan
Original price was: ₨290.00.₨199.00Current price is: ₨199.00. Quick View2.5inch 12V DC Fan Cooling Fan is the best choice for customers. This Exhaust Fan with high-quality material is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc. This fan is made from injection-molded, plastic housing a durable DC motor for long life. 2.5 inch 12V DC Fan is 4 through holes to allow easy mounting to a variety of surfaces. Our 12V DC fans are the clear choice for anyone needing, quality, reliability, and low-cost cooling in their DIY project.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Inductor is a passive two-terminal component that temporarily stores energy in the form of a magnetic field. It is usually called as a coil. The main property of an inductor is that it opposes any change in current.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- 130 motor parameters:
- Rated Voltage 3V to 5V
- No-load speed: 6000 rpm
- Suitable voltage: 3-6V (6000-12000 rpm)
- No-load current: 80mA
- Stall current: 0.6A
- Motor base size: small hole about 1.9mm
- About 25mm long
- Internal diameter is about 19.5mm
- The base is about 3.8mm thick
- Height: about 24.3mm
- Width: about 13.8mm
- Fan blade: 50mm
- Color: random
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
2000W PWM AC Motor Speed Control Module Dimmer
Original price was: ₨900.00.₨840.00Current price is: ₨840.00. Quick View- The voltage is 50-220V.
- The current is 25A.
- Power is 2000W
- Its Size is 52*47*27mm/2*1.85*1in Operation
- Environment Temperature is between -20℃-40℃
-
2004A 20X4 Character Blue Color LCD Display
Original price was: ₨1,650.00.₨1,199.00Current price is: ₨1,199.00. Quick View- Module size(W x H x T): 98.0 x 60.0 x 14.0mm
- Viewing area(W x H): 76.0 x 26.0mm
- Character size(W x H): 2.94 x 4.74mm
- Dot size:(W x H): 0.54 x 0.54mm
- LCD type & color: STN(Blue), FSTN
- View angle: 6 O’clock
- Display type: positive / negative type
- Control IC & package: KS0073 or EQV, COB
- Operating temperature: -20°C – +70°C
- Storage temperature: -30°C – 80°C
-
200W Ceramic Heater Heat Emitter Lamp Incubator
Original price was: ₨799.00.₨499.00Current price is: ₨499.00. Quick ViewThis 200w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
-
20A PWM DC Motor Speed Controller Regulator
Original price was: ₨1,650.00.₨1,399.00Current price is: ₨1,399.00. Quick View- Working Voltage: DC 10V – 60V
- Control Power: 0.01-1200W
- Static Current: 0.010A (Standby)
- Rated Current: 15A
- Max.Current: 20A
- PWM Duty Cycle: 0% -100%
- PWM Frequency: 25 kHz
- Control Voltage: 0-5V
- Potentiometer kind: Single turn
- Resistance: 10k
- Power: 125mW
- Mounting: On cable
- Characteristics: Linear
- Body material: Metal
- Mechanical rotation angle: 300
- Max. operating voltage: 200V
- Material: Plastic, metal
- Module Size: 77x45x29mm
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Resistance: 203 20K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
20LED Solar Human Body Induction Outdoor Lamp
Original price was: ₨900.00.₨599.00Current price is: ₨599.00. Quick View- Solar panel: polysilicon 5.5V/0.55W
- Charging time: 4-6 hours
- Lighting time: 8-10 hours
- Waterproof grade: IP65
- Battery: 18650 lithium battery 3.7V/1200mAh
- Light source type: 20-LED
- Irradiation area: about 30 square meters
- Distance range: 120 + 3-6m sensing distance
- Material: ABS engineering plastics
- Net weight: 0.128kg
-
20N60 belongs to the family of N-channel MOSFET. Its basically a power MOSFET that means it can handle certain levels of power. Its working principle is based on UTC technology. It provides the fast switching application and the minimum on state resistance as well. handling of high current, high speed of switching and low on sate resistance are its major features. Its real life applications include servo motor drivers, UPS, speed control of AC motor and many more.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- LED Bulb E27 DC 12V
- Power: 12W
- Voltage: DC12V
- Socket: E27
- Led Chip Model: SMD2835
- Color Temperature: Cold White 6000-6500K, Warm White 2700-3200K
-
- Power: 18W
- Input / Operating Voltage: 12V DC
- Color Rendering Index: >80
- Life: 30000 Hrs.
- Brightness: 1800 Lumens
- Long Life
- High Quality
- Energy Efficient
- Perfectly works on Solar & Battery
-
- 220V LED Lamp Shade
- 60-SMD LED CHIPS
- 24w Power Consumption
- Best for Indoor & Outdoor Use
- No Heat Sink required
-
Can connect to DC 12V directly,convenient to useSuper high brightness, and very energy savingSuitabe For: LED bulb, candle lamp, down lamp, ceiling lamp, etc.1
-
- 220v LED round strip 18W aluminum board for ceiling light, downlight, spot light, etc.
- High Power LED, saving power, very low heat generating.
- Low consumption, high brightness.
- Special for indoor lighting.
- In use process need to have a cooling module.
-
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. The value of 224 ceramic capacitor is 220nF.
-
Specifications:
- Power (Watts) 1W
- Resistant 22K OHMS
- Tolerance +- 5%
- Resistor Type Carbon Film
- Lead Free
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
22mm LED Digital Display Gauge Volt Voltage Meter Indicator
Original price was: ₨799.00.₨549.00Current price is: ₨549.00. Quick ViewSpecifications of 22mm LED Panel Light Voltage Indicator
- COLOR: RED / GREEN / BLUE / YELLOW / WHITE
- Voltage Range: 60V-500VAC
- Mounting: 22MM
- Life of continuous working: Typically over 20,000 hours.
- Environmental Temperature: -25+55 Degrees Centigrade
- Relative Air Humidity: ?90%
- Frequency: AC 50-60 Hz
-
24 V DC Brushless Fan (60x60x25 mm)
Original price was: ₨315.00.₨252.00Current price is: ₨252.00. Quick ViewFeatures:
- Size: 60 x 60 x 25mm (W x H x D)
- Voltage: 24 VDC
- Current: 80 mA
- Power: 1.9 Watts
- Air Flow: 17 CFM
- Noise: 16.1 dBA
-
- Low Voltage and Standard-Voltage Operation
- 2-wire Serial Interface
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Bi-directional Data Transfer Protocol
- 100kHz and 400kHz Compatibility
- Write Protect Pin for Hardware Data Protection
- 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
- Partial Page Writes are Allowed
- Self-timed Write Cycle (10mS max)
-
24V 1/2W Zener Diode Zener diode 24 V 0.5W
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick View24V 1/2W Zener Diode product and all other general purpose diode types such as Schottky (Baritt), Zener, Crystal, Photo Diode, LED (Light Emitting Diode), Metal Case Power Diodes, Transit; You can purchase various sheath types of Silicon or Germanium models
-
24v 2A Adapter Power Adapter 24V 2000mA
Original price was: ₨450.00.₨399.00Current price is: ₨399.00. Quick View- 100% Brand New
- Input Voltage: 100~240V AC 50-60HZ
- Output Voltage: DC 24V(constant voltage)
- Output Current: Max 2A
- Output Wattage: Max 48W
- DC plug connector size: 5.5mmx2.5mm; compatible Polarity internal: internal +, outside –
- Safety Compliance: FCC/CE/RoHS/CCC
- Working temperature: -20~60
- AC input power cable length: 47.2in / 120cm
- DC output power cable length: 36.2in / 92cm
- Adapter body size: 4.9in(L) x 2.0in(W) x 1.2in (H)
-
- Multi-turn / Cermet / Industrial / Sealed
- 5 terminal styles
- Tape and reel packaging available
- Chevron seal design
- Mounting hardware available (H-117P)
- RoHS compliant
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
- Made of a glass tube with nickel-plated-brass end caps.
- Fast Acting
- Size – 5mm x 20mm
- Voltage – 250V
- Current – 2A
-
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
- Opto-isolated inputs
- Indication LED’s for Relay output status
-
- Motor construction: 10- Flat coreless vibration motor
- Coil construction: Flat coreless core
- Rectifying method: Precious brush and commutator
- Rated Load: Vibration weight
- Rotation direction: CCW or CW
- Motor position: Any position available
- Voltage range for use: DC 2.5V – 3.5V
- Allowable temperature range: -20C to 70C
- Storage environment: -30C- 80C
-
- Small Signal NPN Transistor
- Current Gain (hFE), typically 50 for small signal
- Continuous Collector current (IC) is 800mA
- Collector-Emitter voltage (VCEO) is 50 V
- Collector-Base voltage (VCB0) is 75V
- Emitter Base Voltage (VBE0) is 6V
- Turn on time is 40ns
- Turn off time is 250ns
- Available in To-92 Package
-
The 2N2905 from Multicomp Pro is a through-hole, silicon planar PNP low power bipolar transistors in a TO-39 metal can package. These are general-purpose transistors suitable for switching applications.
-
Features and Technical Specification
- Having a high value of current (max. 600 mA)
- Low voltage value (max. 40 V)
- It comes in different types of packages TO-92, TO-18
- These are Lead (Pb) free devices
- Collector to Emitter voltage (VCEO) is 40v (max.)
- Collector to Base voltage (VCBO) is 60v (max.)
- Emitter to Base voltage(VEBO) is 5v (normally)
- The maximum value of Collector current is 600mA
- Power dissipation at ambient temperature is about 400mW
- Having DC current gain (hfe) of 100 to 300 (max.)
- The temperature of operation and storage is -65 to +150 C
-
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Base- Emitter Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 40V
- Collector-Base Voltage (VCB) is 60V
- Available in To-92 Package
-
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Collector Emitter Voltage (VCE) is 40V
- Collector Base Voltage (VCB) is 40V
- Available in To-92 Package
-
2N4401 is an NPN bipolar junction transistor that is mainly designed for general purpose, small signal, and switching applications.
-
2N5401 Features and Electrical Characteristics
- Available in Pb Free package
- High collector breakdown voltage
- With DC Current Gain (hFE) up to 100
- Maximum voltage across collector and emitter: 150V
- Maximum current allowed trough collector: 600mA
- Maximum voltage across collector and base: 160 V
- Maximum voltage across base and emitter: 5V
- Operating temperature range: -55C to +150C
- Maximum power dissipation: 0.62 W
-
2N5551 is an NPN amplifier Transistor with an amplification factor (hfe) of 80 when the collector current is 10mA. The transistor is commonly used for amplification of audio or other low power signals.
-
- Type Designator: 2SA1013
- Material of transistor: Si
- Polarity: PNP
- Maximum collector power dissipation (Pc), W: 0.9
- Maximum collector-base voltage Ucb, V: 160
- Maximum collector-emitter voltage Uce, V: 160
- Maximum emitter-base voltage Ueb, V: 6
- Maximum collector current Ic max, A: 2
- Maksimalna temperatura (Tj), °C: 125
- Transition frequency (ft), MHz: 15
- Collector capacitance (Cc), pF: 35
- Forward current transfer ratio (hFE), min: 60
- Noise Figure, dB: –
-
2SA1941 bipolar transistor p-n-p type transistor. Collector-Emitter Voltage: -140 V Collector-Base Voltage: -140 V Emitter-Base Voltage: -5 V Collector Current: -10 A Collector Dissipation – 100 W DC Current Gain (hfe) – 55 to 160 Transition Frequency – 30 MHz Operating and Storage Junction Temperature Range -55 to +150 ?C
-
C1383 is a Bipolar NPN type transistor which is used for low-frequency power amplification and driver amplification.
-
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
-
- Type –NPN
- Collector-Emitter Voltage: 400V
- Collector-Base Voltage: 450V
- Emitter-Base Voltage: 7V
- Collector Current: 10A
- Collector Dissipation – 80W
- DC Current Gain (hfe) – 10
- Operating and Storage Junction Temperature Range -55 to +150C
-
- Type: NPN
- Collector-Emitter Voltage, max: 140 V
- Collector-Base Voltage, max: 140 V
- Emitter-Base Voltage, max: 5 V
- Collector Current − Continuous, max: 10 A
- Collector Dissipation: 100 W
- DC Current Gain (hfe): 55 to 160
- Transition Frequency, min: 30 MHz
- Operating and Storage Junction Temperature Range: -55 to +150 °C
- Package: TO-3P
-
- Type – NPN
- Collector-Emitter Voltage: 25 V
- Collector-Base Voltage: 30 V
- Emitter-Base Voltage: 7 V
- Collector Current: 0.05 A
- Collector Dissipation – 0.4 W
- DC Current Gain (hfe) – 130 to 520
- Transition Frequency – 220 MHz
- Noise Figure – 6 dB
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
-
2SD1047 Bipolar NPN type Transistor.
-
- Type –NPN
- Collector-Emitter Voltage: 60V
- Collector-Base Voltage: 60V
- Emitter-Base Voltage: 5V
- Collector Current: 3A
- Collector Dissipation – 30W
- DC Current Gain (hfe) –40 to 320
- Transition Frequency – 5 MHz
- Operating and Storage Junction Temperature Range -55 to +150C
-
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
-
3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit
Original price was: ₨28,000.00.₨18,999.00Current price is: ₨18,999.00. Quick View- Power supply: 5-30VDC
- Maximum power consumption: ≤0.15W
- Operating temperature: -40~80℃
- NPK parameters:
- Range: 0-1999 mg/kg(mg/L)
- Resolution: 1 mg/kg(mg/L)
- Precision: ±2%FS
- Response time: ≤1S
- Protection grade: IP68
- Probe material: 316 stainless steels
- Sealing material: Black flame-retardant epoxy resin
- Default cable length: 2 meters, cable length can be customized.
- Dimensions: 45*15*123mm
- Output signal: RS485/4-20ma/0-5v/0-10v
-
These brushes are perfect for cleaning PC boards and other electronic assemblies.
-
Buy best Quality Electrical and electronics components from Electronation Pakistan in whole sale price. All kind of electrical and electronics components are available.
This is a simple three wire cable. Great for jumping from board to board or just about anything else.
3 pins. 0.1″ spacing. Nylon connectors and mating pc mount, snap-lock header. Female socket connector is pre-wired with 11″ long color-coded 22 AWG stranded wire.
-
3 Pin Crimp Shell Wire | Straight Connector pair
Original price was: ₨65.00.₨39.00Current price is: ₨39.00. Quick ViewThis is a simple three wire cable. Great for jumping from board to board or just about anything else.
-
3 Pin Terminal Block Male/Female
Original price was: ₨89.00.₨69.00Current price is: ₨69.00. Quick View- Product Name : PCB Terminal Block;
- Material: Metal and Plastic.
- Pin header: Brass Tin plated
- Mounting Style: Through Hole
- Color: Green
- Pitch: 5.08mm.
- Position: 3 Pin.
- Rated Value: 300V 15A.
- Wire range: 28-12AWG
- Temperature range: -40 degrees Celsius~105 degrees Celsius
- Soldering temperature: 250℃ ±10℃ /5Sec
- Wire strip length: 4.5~5mm
- Withstanding Voltage: 1.5KV
- Approx. Weight: 5gm
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- High Quality 3.3uH Inductor
- High Current and Self-Resonant Frequency
- Epoxy Coated with Color Band Identifier
- Operating Temperature: -25°C to 85°C
- Tolerance: ±5%
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines.
-
3.5 inch TFT Touch Screen for Arduino Mega
Original price was: ₨1,500.00.₨1,450.00Current price is: ₨1,450.00. Quick ViewFeatures:
Name
Parameter
Display Color
RGB 65K color
Screen Size
3.5(inch)
Type
TFT
Driver IC
ILI9488
Resolution
480*320 (Pixel)
Module Interface
4 Wire SPI Interface
Active Area (AA area)
48.96×73.44(mm)
Module PCB Size
56.34×98(mm)
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
VCC power voltage
3.3V~5V
Logic IO port voltage
3.3V(TTL)
Rough Weight(Package containing)
With touch: 57 (g)
-
3.5″ IPS TFT LCD for Arduino MEGA2560
Original price was: ₨5,000.00.₨3,899.00Current price is: ₨3,899.00. Quick View- Screen size 3.5″ – 480 X 320 Pixels
- Support Arduino Mega2560 directly
- Control IC: ILI9846
- Compatible with 3.3/5V operation voltage level
- Full-angle IPS TFT panel
- With SD card Socket
- Interface: 16 Bit parallel interface
-
Features:
- Connector plug
- Connector type Jack 3,5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
-
This battery is genuinely the most recent in battery-powered innovation. It is incredibly meager, light, and very dainty contrasted with any battery-powered science. Low weight, little size yet enormous limit. The other benefit of lithium polymer innovation is extremely low self-release.
-
3.7V 250mAh Li Polymer Battery 502030
Original price was: ₨400.00.₨299.00Current price is: ₨299.00. Quick View1> 100% brand new2> High quality and high capacity!3>Built-in protection circuit PCM to prevent overcharging or over-discharging4> Size: 5mm(H)*20mm(W)*30mm(L)5> Rating: DC3.7V 250mAh -
- 100% brand new
- High quality and high capacity!
- Built-in protection circuit PCM to prevent overcharging or over-discharging
- Size: 4mm(H)*25mm(W)*30mm(L)
- Rating: DC3.7V 300mAh
- Charging current: standard charging, fast charging: 1.0C: 0.5C
- Standard charging method: 0.5C CC (constant current) charge to 4.25V, then CV (constant voltage 4.2V) charge till charge current is less than or equal to 0.05C
- The maximum charge current: 1C
- Maximum discharge current: 1C
- Discharge cut-off voltage: 2.75V
- The discharge temperature: -20 degrees C~+60 degrees C
-
3.7V 400mAh Lithium Polymer LiPo Rechargeable Battery
Original price was: ₨350.00.₨330.00Current price is: ₨330.00. Quick View- Size: 502040 052040
- Type: Rechargeable
- Voltage: 3.7V
- Chemiacl Composition: Lithium polymer
- Customize: Yes
- Application: use for communication,office,portable
- Battery weight: 7g/Pcs
- Nominal Capacity: 400mAh
- Battery size: thickness:5mm width:20mm Length:40mm
-
3.7V 500mAH Lithium Polymer Battery
Original price was: ₨499.00.₨399.00Current price is: ₨399.00. Quick View3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo or Lipoly batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in GPS, DVD, ipod, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
-
- Ultra-thin design.
- Nominal Voltage: 3.7 V
- Nominal Capacity: 80 mAh
- Low internal resistance
- Sufficient battery capacity
- Outstanding cycle life
- Optimized PCM design
- In series connection or in parallel connection is allowed
- Excellent safety.
- Battery Chemistry: Li Ion Polymer
- Battery Terminations: PC Pins (Horizontal) / (Vertical), SMT (SMD) Mount, Solder Tabs, Wires, Cables with Connectors.
-
Propellers generate thrust by spinning and moving air. High accuracy, well balanced.
-
- Body Material: plastic
- Working fluid: air, water, oil
- Type: normally closed
- Take over pore diameter: 3/4inch
- Operating Viscosity: Under 20CST
- Seal Material: NBR
- Voltage : 12VDC
- Pressure range : 0kg/cm2 10kg/cm2
- Fluid temperature : -5 ? 100 ?
-
30 Watt 220V or 12V DOB(Direct On Board) LED Bulb Raw Material WHITE Color Light Electronic Hobby Kit
Original price was: ₨250.00.₨219.00Current price is: ₨219.00. Quick View- Power Output: 30 Watts
- Input Voltage: 220V AC or 12V DC
- Light Color: White
- Technology: Direct On Board (DOB) LED
- Efficiency: High luminous efficacy for optimal brightness
- Assembly: DIY assembly required
- Components: Includes all necessary electronic components for assembly
- Instructions: Comprehensive assembly instructions included
- Usage: Suitable for electronic hobbyists, DIY enthusiasts, students, and professionals
- Applications: Ideal for workshops, projects, showcases, and various lighting applications
- Versatility: Can be customized and adapted for different setups and configurations
- Ease of Use: User-friendly design for easy assembly and installation
- Quality: High-quality materials ensure durability and reliability
- Safety: Designed with safety in mind, adhering to relevant electrical standards and regulations
-
300W 20A Step Down Converter Voltage Buck Module
Original price was: ₨2,000.00.₨1,449.00Current price is: ₨1,449.00. Quick View- Color: multicolor
- Material: electronic component
- Item size: approx.60*50*30MM
- Input Voltage: 6V to 40V DC(10V to 40V is suggested)
- Output Voltage: 1.2V to 36V DC
- Output Current: 20A(max.), 15A(suggested)
- Efficiency: 95%(24V to 12V, 20A)
- Output Ripple: 50mV
- Wiring Method: Terminal
- Short Circuit Protecting: Self-recovery(cannot short circuit for long time)
- Size: approx. 60 x 53 x 27mm / 2.36 x 2.08 x 1.06′
- VO+: Output positive
- VO-: Output negative
- +IN: Input positive
- -IN: Input negative
- CV: Output voltage adjustment
- CC: Output current adjustment
- EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
- When input and output is common grounded, no-load CV output constant voltage, CC output constant current.