BT134 Triac – 600V – 4A (BT134-600E) Triac they are used in AC switching and control applications with current ratings from under 1A to 40A rms. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. It has Maximum Terminal current: 4A, Max Terminal Voltage is 600 V, Gate trigger current: 25mA & On-state Gate voltage: 1.7V.

• Op-amp coupled with MOSFET at output
• Wide power supply Range

1. Singe supply – 5V to 16V
2. Dual supply – ±2.5V to ±8V

• Input Terminal current: 1mA
• Maximum Output Voltage: 13.3V
• Maximum source current: 22mA
• Maximum sink current: 20mA
• Supply current: 10mA
• Common Mode Rejection Ration (CMRR): 80dB

• Wide supply voltage range 3.0V to 15V
• Low power 10 nW (typ.)
• High noise immunity 0.45 VDD (typ.)
• Buffered Inputs and Outputs
• Standard Symmetrical Output Characteristics
• 100% Tested for Maximum Quiescent Current at 20V
• 5V, 10V and 15V Parametric Ratings
• Maximum Input Current of 1A at 18V Over Full Package-Temperature Range; 100nA at 18V and +25oC

• The supply voltage of IC 4017 ranges from 3V to 15V, usually +5V
• This IC is well-matched with Transistor-Transistor Logic or TTL.
• The operational speed/CLK speed of this IC is 5 MHz.
• It provides support to10 outputs that are decoded.
• It is available in different packages like 16-pin GDIP, PDIP & PDSO
• Input high time 30 ns
• Output current is 10 mA
• Noise immunity is high typically 0.45 VDD
• Operation is completely static
• Low power like 10 W
• Speed operation is medium like 5.0 MHz with 10V VDD
• Input Voltage or Vin ranges from 0.5 VDC to VDD +0.5 VDC
• TS or Storage Temperature ranges from 65C to +150C
• VDD or DC Supply Voltage ranges from 0.5 VDC to +18 VDC
• PD or Power Dissipation is Dual-In-Line is 700 mW
• TL or Lead Temperature is 260C

The CD4024 is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is reset to its logical 0 stage by a logical 1 on the reset input. The counter is advanced one count on the negative transition of each clock pulse.

• CD4027 Dual JK Flip Flop Package IC which operates at medium speed of 16 MHz typically with 10V supply
• Voltage range of 3.0V to 15V
• Static Flip-Flop Operation
• High noise immunity of 0.45 VDD(typ.)
• Set and Reset capability
• TTL compatible
• Low power of 50 nW (typ.)
• Input Rise/Fall time at 5V: 45us
• Maximum and minimum Input Voltage is 2 V and 0.8 V

The CD4040 is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical 1 at the reset input independent of the clock.

• Wide supply voltage range: 3V to 15V
• Low power: 100 nW (typ.)
• High noise immunity: 0.45 VDD (typ.)
• Separate SET and RESET inputs for each latch
• NOR and NAND configuration
• 3-STATE output with common output enable

• Inverting IC that can convert High logic level to Low level
• High source and Sink Current as it has the capability of driving 2 TTL Loads at 5V over full temperature range.
• 100% Tested for Quiescent Current at 20 V
• Maximum Input Current of 1A at 18 V Over Full Package Temperature Range; 100 nA at 18 V and 25C
• 5-V, 10-V, and 15-V Parametric Ratings
• It is available in 16 pin packages of PDIP, SOIC, TSSOP, SO.
• Special input protection to protect inputs against static discharges.

The CD4050 hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage (VDD). The input signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers, and at VDD = 5.0V, they can drive directly two DTL/TTL loads over the full operating temperature range.

• High-Voltage Types (20V Rating)
• CD4073BMS Triple 3-Input AND Gate
• CD4081BMS Quad 2-Input AND Gate
• CD4082BMS Dual 4-Input AND Gate
• Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC

• High-Voltage Types (20V Rating)
• CD4071BMS Quad 2-Input OR Gate
• CD4072BMS Dual 4-Input OR Gate
• CD4075BMS Triple 3-Input OR Gate
• Medium Speed Operation: tPHL, tPLH = 60ns (typ) at 10V
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
• Standardized Symmetrical Output Characteristics

The 4077 is a quad 2-input EXCLUSIVE-NOR gate. The outputs are fully buffered for the highest noise immunity and pattern insensitivity to output impedance. The 4077 operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.

• High Voltage Type (20V Rating)
• 3-State Parallel Outputs for Connection to Common Bus
• Separate Serial Outputs Synchronous to Both Positive and Negative Clock Edges for Cascading
• Medium Speed Operation – 5MHz at 10V (typ)
• Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
• Noise Margin (Over Full Package/Temperature Range) – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V
• 5V, 10V and 15V Parametric Ratings

• Supply voltage ranges from 3v to 18v
• Set-up-time is 150, 70, and 40ns at 5v, 10v, and 15v respectively
• Strobe pulse width is 400, 160, and 100ns at 5v, 10v, and 15v respectively
• Hold time is zero
• 100% tested for quiescent current at 20v
• Having high input current of 1uA (max.) at 18v
• Maximum output current sourcing of 25mA
• Operating temperature ranges from -40 C to 85 C
• Storage temperature ranges from -65 C to 150 C