-
Specification
- Origin: China
- Type: DIAC
Package Type: Through Hole - Package: DO-35
- Breakover Voltage: 28v to 36v
- Typical Breakover voltage: 32v
- Output voltage: 5v
- Breakover current: 50µA
- Leakage current: 10µA
- Peak current: 0.30A
- Rise time: 2µs
- Operating junction temperature: -40℃ to +125℃
- Storage temperature range: -40°c – +125°c
-
-
DB9 Female Right Angle Connector 9 Pin PCB Mount
Original price was: ₨49.00.₨29.00Current price is: ₨29.00. Quick ViewMale Serial Port connector that mounts on a PCB for soldering into your projects or replacing a damaged DB9 Serial Connector on a circuit board.
-
DB9 is a commonly known connector used in Serial Asynchronous Data Transmission that are are designed to work with the EIA/TIA 232 serial interface standard. RS-232 (Recommended Standard 232) is the standard for establishing serial data transfer between DTE(Data Terminal Equipment) and DCE(Data Circuit-terminating Equipment.
-
DC 12V 72 LED Light Chip in Pakistan
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewHigh quality DC light which operates on 12V DC current is a high quality super bright light and it has 72 LED’s.
- Input Volt: 12V DC
- Watt: 60W
- LED Count: 72
- Size: 7.5cm x 7.5cm
Note: Input voltage should not increase from 12v DC for it’s long life
-
DC 12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W
Original price was: ₨6,900.00.₨4,499.00Current price is: ₨4,499.00. Quick View- Core Chip: TPA3116D2
- Operating voltage range: DC 9-25V (Current 3-4A or more, such as the need for more power recommended 19-24V / 4-5A above)
- Audio input sensitivity: 500-800mV
- Frequency response range: 20Hz-20KHz
- Speaker impedance: L/R CH speaker 3.5-8Ω
- BASS speaker: 2-8Ω
- Maximum output power: 50W(Left CH)+50W(Right CH)+100W(BASS CH)
- Size: approx. 101mmx100mmx30mm / 3.97×3.94×1.18”
-
DC 5V-12V to 9V Output Li-ion 18650 Battery UPS Voltage Power Supply Module
Original price was: ₨700.00.₨589.00Current price is: ₨589.00. Quick View -
- Achieve the standards of reliable products.
- Good contact interface and fine electrical property.
- Easy to use. No need to cut and solder, plug and operate.
- Firmly connect and safely connect, not loosen.
- Buy with satisfaction and use at ease.
- Work fluency and durability, which saves your time.
- High temperature-resistant covers and copper pins, durable and reliable.
- High matching degree and perfect matching.
-
DC Gear Motor 6v TT Yellow Gear Motor Double Shaft
Original price was: ₨350.00.₨189.00Current price is: ₨189.00. Quick ViewSpecification: DC Gear Motor 6v TT Gear Motor Yellow Double Shaft
Operating voltage: 3V-6VDC .
Reduction Ratio: 1:48.
The load current: less than or equal to150mA (3V) , less than or equal to200mA (6V) .
No-load Speed: 90+/-10% rpm(3V), 200±10% rpm(6V) .
Color: Yellow.
Material: Plastic, metal.
Size: 7×2.2×1.8cm -
DC Gear Motor With Encoder (6V 210RPM)
Original price was: ₨2,340.00.₨1,872.00Current price is: ₨1,872.00. Quick ViewThis is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.
-
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers. -
A DC jack is an electrical connector for supplying direct current power.
-
Buy high quality DC Jack for your printed circuit board. A DC jack is an electrical connector for supplying direct current power.
-
- Contact rating: MAX 3A 12V DC
- Connector size: 2.1mm x 5.5mm x 9mm Gold Plated
- Product size: 10mm x 10mm x18mm
- Max panel depth: 3mm
- Fitting hole of 7.8mm required | Requires total clearance behind a panel of 13mm
-
If you need to connect a battery pack or wired power supply to a board that has a DC jack – this adapter will come in very handy!
-
Specifications:
- Socket Outer Diameter: 5.5mm
- Center Inner Diameter: 2.1mm
- Plastic Housing with Strain Relief
- Pre-attached wires
- Wire Length: 10.8 inches (27.5cm)
- Color-coded wires for center positive connections
- Stripped and tinned ends
- Num of Internal Contacts: 2 (+ and -)
- 18AWG dual copper conductor wiring
-
Specification:
- Transmission voltage: DC12V
- Length: approx. 24cm
- Inner diameter: 2.1mm
- External diameter: 5.5mm
- Material: copper wire
- Red for positive, black for negative
- Use for: Led Driver / Strip connector / CCTV CAMERA /Car camera
- Model Number: DC Power Male Plug
-
Buy best quality DC Motor at the minimal rates from ElectroNation.
775 motor, with metal rollers in the front, trailed by a copper coat
Shaft length: 17mm;
Shaft distance across: 5mm
Body Diameter: 42mm; Body Length: 66.7mm
Mounting Hole Size: M4;
Mounting Hole: 2 -
Buy the best quality DC Motor at minimal rates from Electronation.
- Product name: DC motor;
- Model: FF-050;
- Operating voltage: 3-12V.
- Output speed: 7400 rpm;
- Motor Size: 1063 x 0.630 x 0.472mm (L x W x H).
- Shaft diameter: 0.059 in;
- Shaft length: 10mm.
- Main Color: Silver Tone.
- Material: metal.
-
Buy best quality DC Motor at the minimal rates from ElectroNation.
-
Buy best quality DC Motor ( tiny, mini, small, medium, large ) all size available at the minimal rates from ElectroNation.
-
-
Description:
For 4 bladed propeller
- Affordable, lightweight, plastic and 4-bladed propeller.
- It can be connected to the furthest limit of a DC motor.
- Use it to move little vehicles, boats, a fan, or even a wind generator!
- Incredible for use pair with a solar powered cell or a battery pack.
- Viable with a wide assortment of science fair activities.
For 3 bladed propeller:
- Affordable, lightweight, plastic, 3-bladed propeller
- Attaches with ease to any DC motor with standard 2mm shaft
- Propels small cars, boats, fans, wind generators
- Great for science fair projects
- Measures 2.75″ x 2.75″ x 0.5″
- DC motor 3v to 12v high speed
-
DC Voltmeter 0-30V 7-Segment Display
Original price was: ₨350.00.₨199.00Current price is: ₨199.00. Quick ViewSpecification
- Measuring range: DC4.0-30.0V
- Power supply range: No additional power supply, direct use of the measured voltage as a power supply, the range as above
- The highest input DC is 30.0V. Note: The input voltage higher than 30V may be permanently damaged! Allowable error 1%; greater than or equal to V, the error is 0.3V; less than V error 0.
- Input impedance : > 0K ohms
- Operating current < 23mA
- Refresh speed: about 300mS time
- Display mode: three “0.6” LED digital tube
- Display colour: red
- Lead length: about cm / 7.7 in
- Dimensions: about 4 x 2 x mm / 1. x 1.14 x 0.7 in
- Opening size: about 46 x mm / 1.1 x 1.07 in
- Net weight: about g
- Operating temperature: – ~ 6
-
Put a voltage meter anywhere with this very handy display to measure a voltage between 8V to 30V.
-
DC-DC 4.5-40V To 5V 2A USB Charger Step down Converter Voltmeter Module
Original price was: ₨1,450.00.₨799.00Current price is: ₨799.00. Quick View- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
-
DF005S Diode Bridge Rectifier 1.5A SOP-4 SMD
Original price was: ₨27.00.₨22.00Current price is: ₨22.00. Quick ViewBridge Rectifiers for PCB Surface Mount.
-
DHT11 Humidity & Temperature Sensor
Original price was: ₨350.00.₨280.00Current price is: ₨280.00. Quick View- Dimension 28mm*12mm*10mm
- Main chip DHT11 huminity sensor
- Voltage: DC 5V
- Digital output
- Humidity Range: 2090%RH
- Humidity accuracy:5%RH
- Temperature range:0-60
- Temperature accuracy: 2
-
DHT11 Temperature and Humidity Sensor
Original price was: ₨300.00.₨249.00Current price is: ₨249.00. Quick View- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: 0C to 50C
- Humidity Range: 20% to 90%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: 1C and 1%
-
- 3.3-5.5V Input
- 1-1.5mA measuring current
- 40-50 uA standby current
- Humidity from 0-100% RH
- -40-80C Temperature Range
- +-2% RH accuracy
- +-0.5 degrees C
-
Digispark – The tiny, Arduino usb dev board
Original price was: ₨620.00.₨449.00Current price is: ₨449.00. Quick ViewThe micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
-
Digital Clamp Meter 600A UNI T UT202A+
Original price was: ₨9,000.00.₨5,899.00Current price is: ₨5,899.00. Quick View- Current Measurement Range:
- AC Current: 20A/200A/600A
- Voltage Measurement Range:
- AC Voltage: 2V/20V/200V/600V
- DC Voltage: 200mV/2V/20V/200V/600V
- Resistance Measurement Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
- Frequency Measurement Range: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
- Capacitance Measurement Range: 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF
- Duty Cycle: 0.1% – 99.9%
- Display: Large LCD display with backlight
- True RMS Measurement: Provides accurate readings for both sinusoidal and non-sinusoidal waveforms
- Non-Contact Voltage (NCV) Detection: Detects the presence of voltage without direct contact for added safety
- Data Hold Function: Freezes measurement readings on the display for easy recording
- Auto Range and Manual Range: Offers both automatic range selection and manual range selection for flexibility in measurements
- Jaw Opening Size: Accommodates conductors up to a certain size for easy clamping
- Safety Rating: Complies with international safety standards and may have CAT (Category) or IEC (International Electrotechnical Commission) safety ratings
- Power Source: Requires batteries (typically AAA batteries)
- Dimensions: Varies depending on the specific model
- Weight: Varies depending on the specific model
- Current Measurement Range:
-
Digital Clamp Meter CM-520A
Original price was: ₨7,600.00.₨5,599.00Current price is: ₨5,599.00. Quick View- True RMS for precise readings
- Auto range for effortless operation
- NCV (Non-Contact Voltage Detection) for safe testing
- Live wire test & continuity test for quick diagnostics
- Diode testing & MAX/MIN recording
- Relative & Zero mode for accurate comparisons
- Data hold & low battery indication
- Auto power-off to conserve energy
-
Digital Clamp Meter CM-550A
Original price was: ₨11,500.00.₨8,299.00Current price is: ₨8,299.00. Quick View- True RMS for accurate readings
- Auto range for ease of use
- NCV (Non-Contact Voltage Detection) for safety
- Live wire test & continuity check for diagnostics
- Diode testing & MAX/MIN recording
- Relative & Zero mode for precise comparisons
- Data hold & low battery indication
- Auto power-off for energy efficiency
-
Digital Clamp Meter DT-266 DT266 AC Digital Clamp Multimeter Electronic Volt Resistance Tester Meter
Original price was: ₨1,999.00.₨1,199.00Current price is: ₨1,199.00. Quick View- DC Voltage: 1000V (±0.5%)
- AC Voltage: 750V (±1.2%)
- AC Current: 20-1000A (±2.5%)
- Resistance(ohm): 20M-2000M(±1.0%)
- Battery: 9V Batteries
- LCD Max Reading: 1999
- LCD Display: 14×47mm
- Clamp Diameter: 2.13cm / 0.83″
- Size: 230×70×37mm
- Clamp meter with high accuracy and good reliability
- 3 1/2 digit LCD display max.value 1999
- Data hold function
- The low voltage symbol display
- Overload protection
- Continuity measurement
- Plug-in insulation tester adapter 500VCD(optional)
- Audible continuity
- Low power indication
-
Digital Multimeter DT9205A
Original price was: ₨1,290.00.₨1,199.00Current price is: ₨1,199.00. Quick View- Type: Digital Multimeter
- Model:DT9205A
- Color: Yellow
- DC Voltage Range: 200mV/20V/200V/1000V
- AC Voltage Range: 200mV/2V/20V/200V/750V
- DC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- AC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- Resistance Range: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ
- Capacitance Range: 2nF/20nF/200nF/2μF/20μF/100μF
- Battery :1*6F22 9V Battery(Not included)
- Size:19cmx9cmx3cm
-
Digital Multimeter Needle Tip Probe Test Leads
Original price was: ₨350.00.₨199.00Current price is: ₨199.00. Quick ViewMultimeter probe test lead is ideal for testing digital circuitry. 15mm plug insertion depth, easily connect to universal digital multimeter standard jack. These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Pair of multimeter replacement cable leads Red and Black. Fits most standard multimeters, please check specifications for size and diameter of the plug connectors. Copper conductor in silicone shielding, heat resistant plastic leads with sharp metal ends.
-
Digital Thermometer with Probe
Original price was: ₨250.00.₨220.00Current price is: ₨220.00. Quick View- Range: -40°C to 200°C
- Measurements taken every 1 second
- Protective case with fastening clip
- Accuracy: +/-0.8°C at 0 to 100°C
- Accuracy: +/-1.0°C at -20 to 0°C
- Accuracy: +/-1.5°C at -40 to -20°C or 100 to 200°C
- Resolution: 0.1°C
- Measure Units: °C or °F
- Probe length: 125mm
- Stainless steel penetration probe.
- HACCP Compliant
- EN 13485 Compliant
- Auto switching-off after 5 minutes
- Dimensions: 150 × 20 × 16mm
-
DIY Kit Remote Control Boat STEM Kit
Original price was: ₨1,000.00.₨840.00Current price is: ₨840.00. Quick View -
Dmc 20×4 81 JHD204A Character LCD Display
Original price was: ₨1,200.00.₨999.00Current price is: ₨999.00. Quick View- Product Name: 20×4 LCD Module
- Application: POS Terminal, Flow Meter, Test Instrument, Measuring Meter, Consumer Electronics
- Display Type: STN Blue, FSTN Positive, STN Blue Negative
- Structure: COB
- Polarizer Type: Transflective/Reflective/Transmissive
- Operating Temperature:0-50C/-10-60C/20-70C/-30-80C
- Connector Method: PIN
- Voltage: 5v
- Operating Temperature: 0C- 50C
- Storage Temperature: 10-60C
- Backlight: LED backlight
- 4 lines of 20 characters
-
Donut Shape Mini USB Mist Maker Air Humidifier Portable Diffuser
Original price was: ₨750.00.₨499.00Current price is: ₨499.00. Quick View- Shape: Round
- Colour: White, Pink, Blue
- Size: 50x50x20mm
- Power Port: USB
- Operating Voltage: 5v
- Function: Negative ions
- The number of fog mouths: 1
- Water shortage power protection: support
- Line length: 1 meter
-
Dotted 100mm X 220mm Stripboard Veroboard Prototyping Board
Original price was: ₨170.00.₨149.00Current price is: ₨149.00. Quick View- Material: Fibreglass FR4
- Surface: Copper PCB
- Hole Diameter: 1.0mm
- Hole Pitch: 2.54mm
- Board Size: 100x220mm
- Copper Thickness: 25 micron
- Sided: Single-Sided
-
This clear double-side tape is a double-coated film, consisting of an acrylic adheisve with extremely high adhesion power and high instant tack. Light and moisture resistant. Permanently bonds plastics and metals. Replaces epoxies and other adhesives.?Clean, dry surface is required for maximum bond strength.
-
Double Slots Li-ion Battery Charger
Original price was: ₨500.00.₨329.00Current price is: ₨329.00. Quick View- The product is brand new, is high quality and has good performance
- Home/Travel Wall AC Multi-Functional/Universal Battery Charger.
- Automatically Stops When Charging is Complete.
- Red/Orange Light Indicates Charging, When Full, It Turns Green.
- Designed to Charge Your Batteries Quickly and Safely.
- Wide Range Of Charging Voltage.
- Slim and Portable Design.
- Gives Convenience to Your Daily Life
- Can Charge All Kinds of 3.7 V Lithium Battery.
-
DP-366P DP66P Pro’s Kit Desoldering Pump
Original price was: ₨690.00.₨549.00Current price is: ₨549.00. Quick View -
DPS-750DB-1 A 10Amp Switching Power Supply Refurbished
Original price was: ₨4,999.00.₨4,444.00Current price is: ₨4,444.00. Quick View- Model:?DPS-750DB-1 A
- Amperes: 10.0A
- Input: 47-63hz 100-240V and 10A
- Output: 750W max
+12v / 62A max
+5VSB /2.0A max
-
Buy low price, high quality drill chuck.
-
DRV8825 Stepper Motor Driver with Heat Sink | High-Precision Stepper Control for 3D Printers & CNC
Original price was: ₨750.00.₨489.00Current price is: ₨489.00. Quick View- Model: DRV8825
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
-
- The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
- 318 temporary data storage RAM
- Working current of 2.0V, less than 300nA
- Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
- 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
- Simple 3 wire interface
- Compatible with TTL Vcc=5V
- Double power supply pipe for main power and backup power supply.
-
DS1302 is a tickle-charge timekeeping chip which contains a real-time clock/calendar and 31 bytes of static RAM. DS1302 uses serial communication to interact with microcontrollers. Also, it automatically adjust the date for the month with fewer days. Clock operates in 24hr or 12hr format with an AM/PM indicator. DS1302 chip is also commonly used as DS1302 RTC module which comes with a 32 kHz crystal and on-board battery backup all in a small SIP module that is compatible with a breadboard. DS1302 module are used by makers with Arduino, Raspberry Pi and other Micro-controllers.
-
The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
-
DS1307 RTC REAL TIME CLOCK MODULE
Original price was: ₨390.00.₨169.00Current price is: ₨169.00. Quick ViewDS1307 RTC REAL TIME CLOCK MODULE which adopts the I2C protocol to communicate with SCM, and there was this kind of interface on Arduino, therefore is very convenient to link with each other. DS1307 has a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break-off, but be careful when you use it to take some kind of high-power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually, we will only use the I2C interface to realize the basic set of the clock/read function. Note, that this module must be installed on the battery and can work normally. The battery is button batteries (type CR2032 will be better), the positive upward:
-
DS18B20 Temperature Sensor (Probe Type)
Original price was: ₨500.00.₨329.00Current price is: ₨329.00. Quick View- Usable temperature range: -55 to 125C (-67F to +257F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into chip
- Multiple sensors can share one pin
- 0.5C Accuracy from -10C to +85C
- Temperature-limit alarm system
- Query time is less than 750ms
- Usable with 3.0V to 5.5V power/data
-
512 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground
. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
. Built-in multidrop controller ensures compatibility with other MicroLAN products
. EPROM partitioned into two 256-bit pages for randomly accessing packetized data
. Each memory page can be permanently write-protected to prevent tampering
. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data
. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page
. Reduces control, address, data, power, and programming signals to a single data pin
. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps
. 8-bit family code specifies DS2501 communications requirements to reader
-
DS3231 REAL TIME CLOCK MODULE – RTC
Original price was: ₨1,099.00.₨349.00Current price is: ₨349.00. Quick View- Size: 38mm (length) * 22mm (W) * 14mm (height)
- Operating voltage: 3.3 – 5 .5 V
- DS3231M at the core
- Clock Accuracy: 5ppm 0-40 C
- Two programmable alarms
- Programmable square-wave output
- DS3231M Datasheet
- LIR2032 / CR2032 backup battery holder for uninterrupted time management (battery not included)
- Wiring instructions (with Arduino Uno R3 for example):
- SCL A5
- SDA A4
- VCC 5V
- GND GND
-
- Adopt 0.36 inch 2-digit common anode Nixie tube
- Adopt low-level signal control for Nixie tube segment / bit-choice
- Connect VCC to the power supply, GND to ground, segment terminal a, b, c, d, e, f, d, up to single-chip I/O port.
- Notice: Forbid connect segment terminal to ground, otherwise, the Nixie tube segment terminal will be destroyed;
- Connect a bit-choice terminal to C1 and connect C2 to a single-chip I/O port
- With LED indicator, it will be turned on when powered on
-
DUAL USB CURRENT VOLTAGE CHARGER DETECTOR
Original price was: ₨799.00.₨699.00Current price is: ₨699.00. Quick ViewApplicable to all kinds of electronic device. Real-time monitoring the charging data, safe and convenient to use. Capable of testing various output and input current and voltage. With precise calibration function, the electric current is more accurate. Suitable for factories, laboratories and personal use.
-
Dual-axis XY Joystick Module for Arduino
Original price was: ₨230.00.₨159.00Current price is: ₨159.00. Quick View- Dimensions: 40 x 27 x 15 (LxWxH) mm
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction
-
DYWSJ Analog Type Thermometer Hygrometer for incubators
Original price was: ₨250.00.₨169.00Current price is: ₨169.00. Quick ViewElectronation Pakistan offers high-quality products at low prices. Indoor Outdoor Pendant Thermometer Home Wall Hang Temporary Mercury Pointer White Hygrometer: Joom prices are the lowest! 64 real reviews with photos! Do you want it to be even more affordable?
-
E3f-ds30c4 – Photoelectric Switch Sensor Pnp
Original price was: ₨3,000.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewE3F-DS30C4 M18 Diffuse Reflection Photoelectric Switch Sensor 3 Wires NPN NO DC 10-30VDC 200mA 30cm Adjustable in Pakistan.
-
EasyVR Shield 3.0 – Voice Recognition Shield
Original price was: ₨10,000.00.₨9,799.00Current price is: ₨9,799.00. Quick ViewDo you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.
EasyVR 2.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost-effective speech and voice recognition capabilities to virtually any application. EasyVR is the third-generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 2.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.
-
EdCharger – Charging & Storage Solution for Edison V3 Robots
Original price was: ₨15,000.00.₨8,499.00Current price is: ₨8,499.00. Quick View-
Product Name: EdCharger – Charging & Storage for Edison V3 Robots
-
Compatibility: Edison V3 robot only (not compatible with earlier versions)
-
Charging Capacity: Up to 5 Edison V3 robots simultaneously
-
Power Input: USB-A (not included)
-
Minimum Power Requirement: 1 Amp (5 watts)
-
Dimensions: 24.2 cm (L) x 5 cm (W) x 9.5 cm (H)
-
Weight: Lightweight and portable (exact weight not specified by manufacturer)
-
Material: Durable, classroom-safe plastic (assumed standard educational-grade)
-
Use Case: Charging and storage solution for education, robotics labs, and STEM programs
-
Color: Typically orange and black (standard Edison robot color scheme; may vary)
-
Included in Box: 1 x EdCharger unit (USB power source not included)
-
-
EdCreate – Edison robot creator’s kit 10 pack
Original price was: ₨150,000.00.₨73,990.00Current price is: ₨73,990.00. Quick ViewEdCreate is the Edison robot creator’s kit, a 5-in-1 expansion pack construction system to create, invent and build interactive, programmable projects.
-
EdCreate Edison robot creator’s kit
Original price was: ₨15,000.00.₨7,499.00Current price is: ₨7,499.00. Quick ViewEdCreate is the Edison robot creator’s kit, a 5-in-1 expansion pack construction system to create, invent and build interactive, programmable projects.
-
Edison EdMat Activity Mat
Original price was: ₨3,500.00.₨2,499.00Current price is: ₨2,499.00. Quick ViewThe barcodes included on the map are:
- Sumo wrestle
- Bounce in borders
- Clap controlled driving
- Line tracking
- Avoid obstacles
- Follow torch
-
Edison Robot – EdPack10
Original price was: ₨290,000.00.₨245,000.00Current price is: ₨245,000.00. Quick View- Ideal for Robotics and Coding Education
- Eco-Friendly and Cost-Effective
- Designed for Classrooms and Home Learning
- Official Edison distributor in Pakistan
-
Get started on your EdVenture into coding and robotics with the EdPack1, which includes 1 Edison robot.
Each Edison robot comes with an internal rechargeable battery and an attached USB cable for both programming and charging your robot.
What’s included in the box?
1 x Edison robot with internal rechargeable battery
3 x skids (1 x attached to the robot, 2 x spare skids located in the packaging)
2 x wheels (attached)
2 x tyres (attached) -
Edison Robot Kit EdPack2
Original price was: ₨68,000.00.₨51,000.00Current price is: ₨51,000.00. Quick ViewLooking for the best educational robot in Pakistan? Meet the all-new Edison Robot V3 — packed with powerful upgrades to make STEM learning more exciting, efficient, and eco-friendly.
-
Edison Robot Kit EdPack3
Original price was: ₨115,000.00.₨76,500.00Current price is: ₨76,500.00. Quick ViewLooking for the best educational robot in Pakistan? Meet the all-new Edison Robot V3 — packed with powerful upgrades to make STEM learning more exciting, efficient, and eco-friendly.
-
Edison Robot V3 Complete STEM Education Combo – Robot + EdCharger + EdCreate Kit
Original price was: ₨67,600.00.₨37,500.00Current price is: ₨37,500.00. Quick ViewEmpower young minds with the Edison Robot V3 Combo – Pakistan’s most advanced, all-in-one robotics and coding solution. Perfect for schools, homeschooling, and tech-savvy kids, this bundle combines the smart Edison V3 Robot, the fast-charging EdCharger, and the creative EdCreate Kit – everything you need to start building, coding, and innovating!
-
Edison Robot Value Pack – 5 Robots + 1 Charger + 1 EdCreate Kit
Original price was: ₨175,000.00.₨141,999.00Current price is: ₨141,999.00. Quick ViewUpgrade your STEM classroom or learning space with the Edison Value Pack, specially bundled for maximum learning, minimum hassle.
-
EdSTEM Class Pack – 30 Edison robots and 15 EdCreate kits
Original price was: ₨986,985.00.₨835,000.00Current price is: ₨835,000.00. Quick ViewBring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
-
EdSTEM Home Edison robots and EdCreate kit
Original price was: ₨40,000.00.₨31,999.00Current price is: ₨31,999.00. Quick ViewBring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
-
EdSTEM Home Pack – 2 Edison robots and EdCreate kit
Original price was: ₨76,000.00.₨57,500.00Current price is: ₨57,500.00. Quick ViewBring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
-
EGS002 EG8010 IR2113 DC to AC SPWM Pure Sine Wave Inverter Module
Original price was: ₨3,250.00.₨1,699.00Current price is: ₨1,699.00. Quick ViewEG8010 is a digital, function very well brings its own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer architecture, an external 12MHz crystal oscillator, to achieve high precision, and harmonic distortion is very small, 50Hz or 60Hz pure sine wave inverter ASIC. The chip uses CMOS technology, the internal integration of the SPWM sine generator, a dead-time control circuit, the multiplier factor range, a soft start circuit, a protection circuit, an RS232 serial communication interface and a serial driver module 1602 functions.
-
4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF . 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF . 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF .
-
Electret Condenser Microphone (Mic)
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick View- Operating temperature: -20-70 DEG C
- Size: 6*2.2mm
- Operating Voltage: DC 1-10V
- Operating Reference Voltage: 3V DC
- Impedance: 2.2K
- Current: 0.5mA
- Directivity: Omnidirectional
- Signal to Noise Ratio: 40dB (MIN)
-
A well made and nicely finished outrunner. Excellent for small foamies and indoor shockflyers.
-
Encoder Coupling Aluminum Flexible 3mmx5mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3mmx5mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 3mmx6mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3mmx6mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 3mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3×8
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 4mmx4mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 4mmx4mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 4mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 4mmx8mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible, 5mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3×8
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Metal flexiable 6mmx6mm
Original price was: ₨1,200.00.₨899.00Current price is: ₨899.00. Quick View- Easy to install, buffer, damping, convenient to disconnect.
- A shaft coupler is Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- The size refers to the hole, for example, 4mm x 5mm means the hole diameter of one side is 4mm and the other side is 5mm.
-
Encoder Coupling Aluminum MetalFlexiable 6mmx8mm
Original price was: ₨1,400.00.₨899.00Current price is: ₨899.00. Quick View- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 6mm x 8mm
-
EPROM 27C16 is a high speed 16K UV erasable and electrically reprogrammable CMOS EPROM ideally suited for applications where fast turnaround pattern experimentation and low power consumption are important requirements The 27C16 is packaged a 24-pin dual-in-line package.Access time down 450 ns Low CMOS power consumption Active Power 25 mW max Standby Power 53 mW max (98% savings) Performance compatible to NSC800TM CMOS microprocessor Single 5V power supply Pin compatible to MM2716 and higher density EPROMs Static no clocks required TTL compatible inputs outputs TRI-STATE output Windowed DIP Package Specifications guaranteed over full military temperature range 125 C).
-
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.
-
ESC 30A Standard 30A BLDC ESC Electronic Speed Controller
Original price was: ₨1,650.00.₨1,249.00Current price is: ₨1,249.00. Quick ViewStandard 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs.
-
Esp Adaptor with Temp Sensor
Original price was: ₨640.00.₨550.00Current price is: ₨550.00. Quick ViewESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
-
ESP-01 Adapter Module 3.3-5V
Original price was: ₨270.00.₨249.00Current price is: ₨249.00. Quick View- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
-
- Added six I/O serial and six SPI serial
- Support wireless 802.11 b/g/n standard
- Support the STA/AP/STA AP three work modes
- Built-in TCP/IP protocol stack, and support multiple TCP Client connection
- Support rich Socket the AT command
- Support UART/GPIO data communication interface
- Support Smart Link intelligent networking
- Support remote firmware update (OTA)









































































































































