-
GY-31 TCS230 TCS3200 Color Sensor
Original price was: ₨2,000.00.₨1,350.00Current price is: ₨1,350.00. Quick View- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
-
Gy-61 Triple Axis Accelerometer Adxl335
Original price was: ₨1,990.00.₨1,749.00Current price is: ₨1,749.00. Quick View- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high-current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C addresses for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Dimensions 20x16mm
- Designed for 5V logic level
-
GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Original price was: ₨490.00.₨399.00Current price is: ₨399.00. Quick ViewA 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
-
- Chip: MPU-6050
- Power supply: 3v-5V
- Gyroscope range: + 250 500 1000 2000/ s
- Acceleration range: 2 4 8 16 g
- Communication: Standard IIC communication agreement
- Chip built-in 16 bit AD converter, 16 bits of data output
- Pin Pitch 2.54 mm
- SIZE: 20.3mm x 15.6mm
-
Half Size Breadboard 400 Points For Electronics
Original price was: ₨250.00.₨179.00Current price is: ₨179.00. Quick ViewHalf Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
-
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40C to 85C.
- Turn on and Turn off time is 2 sec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.
-
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.
-
HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.
-
HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
Original price was: ₨1,350.00.₨749.00Current price is: ₨749.00. Quick View- Working frequency: 433.4MHz to 473.0MHz
- Supply voltage: 3.2V to 5.5VDC
- Communication distance: 1,000m in the open space
- Serial baud rate: 1.2Kbps to 115.2Kbps(default 9.6Kbps)
- Receiving sensitivity: -117dBm to -100dBm
- Transmit power: -1dBm to 20dBm
- Interface protocol: UART/TTL
- Operating temperature: -40℃ to +85℃
- Dimensions: 27.8mm x 14.4mm x 4mm
-
HC-SR501 PIR Human Motion Sensor
Original price was: ₨260.00.₨229.00Current price is: ₨229.00. Quick View- Wide range on input voltage varying from 4.V to 12V (+5V recommended)
- Output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operating modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
-
HCSR04 ultrasonic sensor Bracket
Original price was: ₨180.00.₨69.00Current price is: ₨69.00. Quick View- Thickness: 2.8 – 3.1 mm
- Inner diameter: 16 mm
- Fixing Hole Diameter: 3.8 mm
- Material: High Quality Imported Acrylic
- Colour: Blue
- Application: Stationary ultrasonic sensor modules and other products
-
HCSR501 HC-SR501 PIR Sensor
Original price was: ₨350.00.₨229.00Current price is: ₨229.00. Quick View- Use BISS0001 signal processing IC, sanyo genius regulator
- Voltage: 5V 20V
- Power Consumption: 65mA
- TTL output: 3.3V, 0V
- Delay time: adjustable (0.3 sec 10 minutes)
- Lock time: 0.2 sec
- Trigger methods: L disable repeat trigger, H enable repeat trigger
- Sensing range: less than 120 degree, within 7 meters
- Temperature: 15 ~ +70
- Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
-
- Length: 1.5 meter
- Input: HDMI (Type A male connector)
- Output: HDMI
-
Heart Rate Monitor ECG AD8232 Module + Leads
Original price was: ₨2,500.00.₨1,479.00Current price is: ₨1,479.00. Quick View- Supply voltage: DC 3.3V
- Output: Analog output
- Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
- Size 36mm * 31mm * 18mm
- Operating temperature: -40C +85 C
-
The HEF4104B is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high voltage circuits. For example low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high voltage LOCMOS. It has four data inputs (A0 to A3), an active HIGH output enable input (OE), four data outputs (B0 to B3) and their complements (B0 to B3).
-
Helicopter Coreless Micro DC Motor With Propeller
Original price was: ₨499.00.₨399.00Current price is: ₨399.00. Quick ViewCoreless motor with propeller for RC aeroplane and helicopter.
-
HER107 HER-107 high efficiency rectifier diode
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick ViewFEATURES
Low forward voltage drop
High current capability High reliability
High surge current capability
High speed switching -
Hi Flow Soldering Wire (100gm)
Original price was: ₨590.00.₨449.00Current price is: ₨449.00. Quick ViewSoldering wire is used for creating a robust connection between two wires or to join electronic components of all kinds to a printed circuit board. This soldering wire is of 100 gm.
-
Hi Flow Soldering Wire (50gm)
Original price was: ₨300.00.₨269.00Current price is: ₨269.00. Quick View- 100% Brand new and high quality
- Good solder-ability, insulation resistance, no spattering and non-corrosive Material: Metal
- Wire Diameter:Approx.0.8mm
- Flux 2.2%
- Tin 60%
-
HI-LINK 120VAC-220VAC 5VDC 3W Power Supply
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick View- Input voltage:90-240 VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Low power consumption, environmental protection, no-load loss <0.1W
- 100% load aging and testing
- Operation Temperature: -20 — +60
- Store Temperature: -40 — +80
- Relative humidity: 5 — 95 %
- Cooling way by radiation
- Atmospheric pressure: 80—106 Kpa
- Sea level elevation: 2000 m
- Rated input voltage: 100-240 VAC
- Input voltage range: 90-264 VAC
- Meets UL and CE requirements
- Ultra-thin and ultra-small
-
High Quality 12V 6A AC-DC Switching Power Supply Module Heavy Duty
Original price was: ₨2,850.00.₨999.00Current price is: ₨999.00. Quick View- Item Type: Switching Power Supply Module
- Material: Synthetic cardboard
- Usage: Used for AC to DC power module
- Power Supply Model: WX -DC2407p
- AC Input: AC100-240V
- Universal AC Frequency: 50HZ/60HZ
- Output Voltage: DC12V
- Output Current: 5-6.5A (without any voltage drop)
- Output Power: 180W (maximum 220W)
- Positioning Hole Size: Approx. 10.58 x 5.57cm / 4.2 x 2.2in
-
High Quality 3.7v 10000mah 1260110 Polymer Lithium Ion Li-ion Rechargeable Battery
Original price was: ₨1,850.00.₨1,399.00Current price is: ₨1,399.00. Quick View- Type: Lithium battery
- Capacity: 10000mAh
- Rechargeable: YES
- Charging Voltage: 4.2V
- Rated Voltage: 3.7V
- Working Temperature: -20°~50°
- Dimensions(L*W*H): About 110 x 60 x 12mm
-
High Quality 37 in 1 Sensor Module Board Set Kit For Arduino
Original price was: ₨4,500.00.₨2,599.00Current price is: ₨2,599.00. Quick ViewThis 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
-
High Quality 5in Diagonal Pliers Cable Wire cutter
Original price was: ₨600.00.₨499.00Current price is: ₨499.00. Quick View- The blade can cut effectively, suitable for various cables.
- Small body, easy to carry.
- Made of high quality steel, high hardness and durable to use.
- It can cut plastic without slip which can provide convenience and comfort.
- Comfortable ergonomics handle can reduce fatigue when using.
-
High Quality Power Supply Adapter 5V DC 2Amp
Original price was: ₨350.00.₨259.00Current price is: ₨259.00. Quick View- Simple to use, just plug-in, charge up and play.
- Short circuit, over-voltage and over-current protection.
- Incredibly low fault rates this power supply is a regulated center positive power supply.
- High quality graded AC to DC power adapter.
- Light in weight and with heavy-duty cable-wire.
- Compatible with Dth, STB, CCTV, toys, broadband, laptop, DVD, tablet, TV tuner card, cordless phones, LCD monitor, scanner, cell phone, printers
-
High Quality Super Strong Permanent Bar Shaped Magnet
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick ViewNdFeB magnet is an alloy magnet made from Nd,Fe,B and other metal elements,which has the high remanence,high coercive force,high energy and high performance/cost ratio.The highest magnetic properties is from 33MGOe to 52MGOe,and we are able to control the magnetic properties within the range as you demanded,like SH,UH,EH such high stable properties could be produced as per your industrial application.
-
Horizontal Float Switch (White)
Original price was: ₨990.00.₨792.00Current price is: ₨792.00. Quick View- Switch Closed in Horizontal Position and Open When Vertical
- Corrosion Resistant Polypropylene Construction
- M12 Thread Size for Screw Fixing Internally
- Contact Rating: 220VAC @ 1A
- DC Contact Rating: 24Vdc @ 0.25A
- Temperature Rating: -30C to 100C
- Suitable for Water Tanks and Water Treatment Systems
-
Horizontal Float Switch Black
Original price was: ₨470.00.₨349.00Current price is: ₨349.00. Quick View- Material: plastic
- Color: black
- Switch power(Max): 10W
- Switching voltage(Max):AC 100V
- Switching current(Max):AC 0.5A
- Electric strength: AC1500V/Imin
- Contract resistance: 200 milli-ohm
- Temperature rating:-20 ~ +80
- Cable length: About 400 mm / 15.76″
- Float length: 85 mm / 3.35″
-
Hot End For 3D Printer
Original price was: ₨3,000.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Model: J-Head Hot End V6
- Design: Long-Distance
- Improved processing of flexible filament
- More compact design
- Easier maintenance
- Reduced heating
- Improved temperature control and cooling
- Material: aluminum
- Nozzle: 0.4 mm
- Filament: 1.75 mm
- 12V 40W heating cartridge
- NTC thermistor 100k
- Cable length: approx. 90 cm
-
- Strong Adhesive Glue Sticks
- Paintless Dent Repair Tool Glue Sticks for Hot Glue Gun
- APPLICATIONS – Gluing plastic, metal, wood, fabric, ceramics, and cartons.
-
- HP2730 Opto Coupler IC
- Number of Channels: 2
- Voltage – Isolation: 2500 Vrms
- Current Transfer Ratio (Min): 300% @ 1.6 mA
- Turn On / Turn Off Time (Typ): 300 ns, 5 s
- Input Type: DC
- Output Type: Darlington
- Voltage – Output (Max): 7 V
- Current – Output / Channel: 60 mA
- Voltage – Forward (Vf) (Typ): 1.3 V
- Current – DC Forward (If) (Max): 20 mA
- Operating Temperature: -40C to 85C
- Mounting Type: Through Hole
- Package: 8-DIP (0.300″, 7.62mm)
-
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of 8 address bits and 4 data bits. Each address and data input is externally programmable or fed in using switches. The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. These ICs are paired with each other. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address and data, transmitted by a carrier using an RF transmission medium and gives output to the output pins after processing the data. These Ics have operating Voltage : 2.4V ~ 12V. They have Low Power and High Noise Immunity.
-
HTC-1 Electronic Temperature Humidity Meter
Original price was: ₨895.00.₨499.00Current price is: ₨499.00. Quick View- Large LCD display, multi-function.
- Indoor & outdoor temperature display, indoor humidity display, and time display.
- A memory of MAX & MIN measuring value.
- 12-hour / 24-hour displaying system selectable.
- degree C& F unit selectable.
- Clock, Date & Calendar function (month and date).
- Everyday alarm function.
- Desktop placing or Wall Hanging.
- Low power consumption.
- High stability & accuracy.
-
HTC2 Digital Thermometer And Hygrometer HTC 2
Original price was: ₨900.00.₨649.00Current price is: ₨649.00. Quick ViewThe main
Weather station type
home weather stationIndoor temperature measurement
YesOutdoor temperature measurement
YesIndoor humidity measurement
YesExternal sensor
wiredThe country of manufacture
Chinacondition
NewA type
DigitalOperating principle
Electronicunit of measurement
C / F -
Humidity and Temperature Sensor DHT22
Original price was: ₨899.00.₨659.00Current price is: ₨659.00. Quick View- Calibrated and doesn’t require extra components
- Input: 3.3-6V
- Measuring current: 1-1.5mA
- Standby current: 40-50uA
- Humidity: 0-100% RH
- Temperature: -40º to 80ºC (+-0.5ºC)
- RH accuracy: +-2%
-
HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
Original price was: ₨1,200.00.₨549.00Current price is: ₨549.00. Quick View- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Emission mode current(peak): 115mA.
- Receive Mode Current(peak): 45mA.
- Power-down mode current: 4.2uA.
- Sensitivity 2Mbps mode in received: -92dBm.
- Sensitivity 1Mbps mode in received: -95dBm.
- PA gain: 20DbLNA gain: 10Db.
- Sensitivity 250kbps mode in received: -104dBm.
- Operating Range: 1 km
- LNA Noise figure: 2.6 Db.
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Interface: SPI.
-
HW-370 TP5100 2A Li-Ion Battery Charger Module
Original price was: ₨500.00.₨159.00Current price is: ₨159.00. Quick View- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100>#/li###
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, under-voltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
-
HW632 HW-M632 XH-M603 CHARGING CONTROL MODULE
Original price was: ₨1,050.00.₨749.00Current price is: ₨749.00. Quick View- Model: HW632
- Input Voltage: DC 10-30V
- Display Precision: 0.1V
- Control Precision: 0.1V
- Output Type: direct output
- Voltage Tolerance: +/-0.1V
- Application Fields: 12-24V storage battery
- Size: 82*58*18mm
-
HX711 Module Load Cell Voltage Amplifier
Original price was: ₨160.00.₨149.00Current price is: ₨149.00. Quick ViewThe HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell with some calibration. You?ll be able to get very accurate weight measurements.
-
This is a IC Socket/Base for 28 pin SMD PLCC IC. This is a SMT base and is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC’s.
-
-
- Guaranteed zero reading for 0 V input on all scales
- True polarity at zero for precise null detection
- 1pA typical input current
- True differential input and reference, direct display drive – LED lCL7107
- Low noise – less than 15 VP-P
- On-chip clock and reference
- Low power dissipation – typically less than 10mW
- No additional active circuits required
- Enhanced display stability
- Pb-free (RoHS compliant)
-
IMAX B3 AC Compact Balance Charger
Original price was: ₨1,520.00.₨999.00Current price is: ₨999.00. Quick ViewImax RC B3 Compact Charger SPECIFICATION:
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery
-
iMAX B6 AC/DC Version 80W Lipo Balance Charger/Discharger
Original price was: ₨10,000.00.₨8,999.00Current price is: ₨8,999.00. Quick View- Operating voltage range: DC 11.0-18.0 Volt; AC in 100-240V, 50/60Hz
- Circuit Power: MAX. charge power 50W ; Max. discharge power 5W
- Charge current range: 0.1-5.0A
- Discharge current range: 0.1-1.0A
- Current drain for balancing LiPO: 300mAh/cell
- NiCd/NiMH: 1-15 cell
- Li-ion/Polymer: 2-6 series
- Pb battery voltage: 2V-20V
- Weight: 580 g
- Dimension: 133mm x 87mm x 33mm
-
IMAX B6 LIPO Charger With Adapter
Original price was: ₨9,500.00.₨6,999.00Current price is: ₨6,999.00. Quick View- Input Voltage: 11-18v
- Circuit power: Max Charge: 80W / Max Discharge: 5W
- Charge Current Range: 0.1-5.0A
- Discharge current range: 0.1-1.0A
- Ni-MH/NiCd cells: 1-15
- Li-ion/Poly cells: 1-6
- Pb battery voltage: 2-20v
- Dimensions: 103x83x30mm
- Weight: 450 grams
-
Imported Quality Soldering Helping Hand Soldering Stand
Original price was: ₨2,500.00.₨1,599.00Current price is: ₨1,599.00. Quick View -
IN4001 Diode 4001 Rectifier Diode
Original price was: ₨8.00.₨5.00Current price is: ₨5.00. Quick View- Package Type: Available in DO-41 & SMD Packages
- Diode Type: Silicon Rectifier General Usage Diode
- Max Repetitive Reverse Voltage is: 50 Volts
- Average Fwd Current: 1000mA
- Non-repetitive Max Fwd Current: 30A
- Max Power Dissipation is: 3W
- Max Storage & Operating temperature Should Be: -55 to +175 Centigrade
-
- Average forward current is 1A
- Non-repetitive Peak current is 30A
- Reverse current is 5uA.
- RMS reverse voltage is 70V
- Peak repetitive Reverse voltage is 100V
- Available in DO-41 Package
-
IN4148 Diode 1N4148 / 1N914 Signal Diode
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick ViewVoltage – DC Reverse (Vr) (Max): 75VCurrent – Average Rectified (Io): 150mAVoltage – Forward (Vf) (Max) @ If: 1V @ 10mASpeed: Small Signal =< 200mA (Io), Any SpeedReverse Recovery Time (trr): 4nsCurrent – Reverse Leakage @ Vr: 5A @ 75VCapacitance @ Vr, F: 4pF @ 0V, 1MHzThermal Resistance: 300C/W JaMounting Type: Through HolePackage / Case: DO-204AH, DO-35, AxialSupplier Device Package: DO-35Operating Temperature – Junction: -65C ~ 175COther Names: 1N4148CT,1N4148CT-ND, 1N4148DICT, 1N914 -
IN5819 Diode SCHOTTKY DIODE 1N5819
Original price was: ₨15.00.₨9.00Current price is: ₨9.00. Quick View- Schottky Rectifier Diode
- Average forward current is 1A
- Forward Surge Current is 25A
- Forward Voltage Drop 600mV at 1A
- Peak reverse voltage is 40V
- RMS Reverse Voltage is 28V
- Available in DO-41 Package
-
- Inductance: 100UH
- Inductance Tolerance: 10%
- Inductor Case Style: Radial Leaded
- No. of Pins: 2
- drum inductor
- copper winding
-
Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5 to 12 (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.
-
Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!
-
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
-
- Voltage: 3.3V to 5V
- Characteristics: 700nm x 1mm
- Chipset: TSOP1838 37.9kHz
- Daylight Rejection: up to 500LUX
- Receiving Distance: up to 18 m
- Size: 19mm x 15mm x 14mm
-
INFRARED TEMPERATURE SENSOR GY-906 MLX90614
Original price was: ₨3,950.00.₨1,599.00Current price is: ₨1,599.00. Quick View- Easy to integrate
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Factory calibrated in temperature range:
- -40+125C for sensor temperature
- -70+380C for object temperature
- High accuracy of 0.5C over a wide temperature range (+50C for both) High (medical) accuracy calibration
- The measurement resolution of 0.02C
- Single and dual-zone versions
- SMB is compatible digital interface
- Customizable PWM output for continuous reading
- Different package options for applications and measurements versatility
-
Instant Heat 100W Dual Temperature Hot Melt Glue Gun
Original price was: ₨750.00.₨599.00Current price is: ₨599.00. Quick View- Lightweight, easy-squeeze trigger, rubber coating for easier cleaning, detachable stand to keep the gun stable
- The heater component of the product is made of positive temperature coefficient electric resistance
- It’s heating very fast and has automatic control temperature.
- The hot melt glue gun can use normally in 100V to 240V, place the fuse, use safer.
- It can use at double power i.e at 60W & at 100W
- PTC heating system to ensure high power and quick heating, high glue output, and fast melting.
- Heats quickly (3-5mins), no waste of time.
-
Interfacing EMG Muscular Signal Sensor
Original price was: ₨6,000.00.₨4,499.00Current price is: ₨4,499.00. Quick ViewFeatures:
- Small Form Factor
- Specially Designed for Microcontrollers
- Adjustable Gain using onboard potentiometer
- 5mm Connector
Applications:
- Video games
- Robotics
- Medical equipment
-
IOT – WiFi Smart Light Bulb – 13W – Dimmable RGB – Timing Control LED
Original price was: ₨1,550.00.₨849.00Current price is: ₨849.00. Quick View- 2.4GHz Wi-Fi Access, Support app control via both IOS and Android devices
- 16,000,000 colors, dimmable, and color temperature range 2700K/6500K
- Set time schedules and countdowns, available in Group control, and no hub is required
- Wi-Fi enabled and no hub required
- AI-ready for hands-free control with Google Assistant and Amazon Alexa
- Programmable lights to turn on/off at the set time of choice
- Dimmable and adjustable color temperature
-
IP2312 3A Module Type-C Lithium Battery Fast charging
Original price was: ₨340.00.₨179.00Current price is: ₨179.00. Quick View- Main control chip: IP2312
- Input voltage: 4.5~5.5V
- Charging cut-off voltage: 4.2V / 4.35V (the output voltage of the two versions is optional)
- Charging current: 3A (the current can be changed by adjusting the resistance)
- Indicator light: yes
-
Transmitter (Tx):
- Power: 0.1W.
- Absolute Maximum Forward Current: 50mA.
- Launch Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.1V.
- Diameter: 5mm.
Receiver (Rx):
-
- Power: 0.15W.
- Maximum Current: 30mA.
- Receiving Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.2V.
- Diameter: 5mm.
-
IR Infrared sensor Two way Obstacle Sensor
Original price was: ₨200.00.₨109.00Current price is: ₨109.00. Quick View- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
-
IR Obstacle Avoidance Sensor
Original price was: ₨250.00.₨135.00Current price is: ₨135.00. Quick View- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35
- Comparator chip: LM393
- 3mm screw holes for easy mounting
-
IR Proximity Sensor 0A4-1SK
Original price was: ₨950.00.₨900.00Current price is: ₨900.00. Quick View- Type of sensor: photoelectric
- Range : 40~300mm(1.5 to 12)
- Output configuration: Analogue voltage
- Operation mode: Diffuse-reflective
- Supply voltage: -0.3~7V DC
- Connection: S3B-PH
- Max operating current: 22mA
- Average current consumption: 12 mA
- Output voltage differential over distance range: 2.3 V (typical)
- Update period: 16.5 4 ms
- Size: 44.5 mm x 18.9 mm x 13.5 mm (1.75 x 0.75 x 0.53)
- Operating temperature: -10~60C
- Body material: Plastic
-
IR receiver VS1838B TL1838 – 38KHz
Original price was: ₨90.00.₨70.00Current price is: ₨70.00. Quick View- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz Diode
- Voltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz DiodeVoltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
-
- Operating Voltage: 3.3-5V
- Fixing Screw Hole: M3
- Distance setting from 1mm to 10cm
- Control Card Dimensions: 42x38x12mm
- Sensor Dimensions: 25x12x12mm
- Card Output: Digital
-
IR2110 Mosfet & IGBT Gate Driver IC
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewThe IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
-
- Package Type: TO-220
- Transistor Type: N Channel
- Max Voltage Applied From Drain to Source: 55V
- Max Gate to Source Voltage Should Be: 20V
- Max Continues Drain Current is : 49A
- Max Pulsed Drain Current is: 160A
- Max Power Dissipation is: 94W
- Minimum Voltage Required to Conduct: 2V to 4V
- Max Storage & Operating temperature Should Be: -55 to +170 Centigrade
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID) is 110A when VGS is 10V
- Minimum Gate threshold voltage 2V
- Drain to Source Breakdown Voltage: 55V
- Low On-Resistance of 8.0m
- Gate-Source Voltage is (VGS) is 20V
- Rise time is 101ns
- It is commonly used with Power Switching circuits
- Available in To-220 package
-
IRF4905 MOSFET is a P-Channel HEXFET Power MOSFET available in a TO-220AB package and is based on Advanced Process Technology. It is mainly used for fast switching purpose, capable of providing ultra-low on-resistance. This tiny device comes with three terminals called gate, drain and source where the gate terminal is used to control the current on remaining two terminals. The area between source and drain is known as a channel that is widely dependent on the voltage applied to the gate terminal.
-
- Fast Switching Applications
- Uninterruptible Power Supplies
- Battery Chargers
- Battery Management Systems
- Solar Battery Chargers
- Solar Uninterruptible Power Supplies
- Motor Driver Applications
- Telecommunication Applications
- Computer Related Applications
-
N-Channel Power MOSFET provide the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
- Dynamic dV/dt rating
- Repetitive avalanche rated
- Fast switching
- Ease of paralleling
- Simple drive requirements
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 10A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 400V
- Drain Source Resistance (RDS) is 0.55 Ohms
- Rise time and fall time is 27nS and 24nS
- Available in To-220 package
-
This Power MOSFET provides the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 8A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 500V
- Drain Source Resistance (RDS) is 0.85 Ohms
- Rise time and fall time is 23nS and 20nS
- Available in To-220 package
-
IRFP250 N-channel Power MOSFET
Original price was: ₨280.00.₨239.00Current price is: ₨239.00. Quick View- Repetitive Avalanche Ratings
- Dynamic dv/dt Rating
- Hermetically Sealed
- Simple Drive Requirements
- Ease of Paralleling
- Type Designator: IRF250
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
-
MOSFET (metal-oxide-semiconductor field-effect transistor, pronounced MAWS-feet) is a special type of field-effect transistor (FET) that works by electronically varying the width of a channel along which charge carriers (electrons or holes) flow. The wider the channel, the better the device conducts. The charge carriers enter the channel at the source and exit via the drain. The width of the channel is controlled by the voltage on an electrode called the gate, which is located physically between the source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.
-
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is 20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Rise time and fall time is about 60ns and 45ns respectively.
- It is commonly used with Arduino, due to its low threshold current.
-
This is a soldering iron bit for 100W.
-
This is a soldering iron bit for 40W.
-
This is a soldering iron bit for 60W.
-
This is a soldering iron bit for 60W.
-
High quality heating element for your soldering iron.
-
Isd1820 Recording And Playback Module With On Board Mic And Loud Speaker
Original price was: ₨680.00.₨439.00Current price is: ₨439.00. Quick View- The main chip: is ISD1820.
- Dimensions: 43 x 34 x 11 (LxWxH) mm.
- The working voltage: is DC 3V-5V.
- Loudspeaker: 8 Ohm, 0.5W.
- An easy-to-use 10-second voice recording.
- High-quality, natural voice restored.
- It can be used as a propaganda module.
- With looping, jog playback, and single-pass play function.
- Available single-chip control.
- This module can directly drive a small speaker 8 ohm 0.5W.
- Power supply: 3-5V, which can be accessed by pin power.
- Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
-
It is an Interned service provider cable which provides internet access through DSL or cable modems.
-
J5019 Battery Charge Micro USB Lithium Lipo 18650
Original price was: ₨350.00.₨179.00Current price is: ₨179.00. Quick View- Discharging current: Max. 2A
- Charging current: Max. 1A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC
- Size: 3.3×2.3cm/1.3×0.91″
- Package Included: 8pcs 2A USB Adjustable Boost Module
-
Jackly 6032-A Screwdriver Set
Original price was: ₨600.00.₨449.00Current price is: ₨449.00. Quick View- Brand :JACKLY
- Type: precision screw
- Model Number: JK 6032-A
- Head screw type: 32 Kinds
- Material: PP & TPR & CR-V steel
- Hardness: H.R.C. 50-52
- Package weight: 226g/8oz
- Package size: 15.5×10.5x3cm/6×4.2×1.3in
-
Jackly Screwdriver set (31in1)
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- It is yellow in color and made of metal
- It is a 31 in 1 compact, portable, and multi-functional screwdriver tool kit
- It weighs only 500 grams
- Set of Pieces: 31 Pcs
- It’s Portable
- Material: Metal
-
Discover the power of AI and robotics with the NVIDIA Jetson Nano 2GB Developer Kit. It’s small, powerful, and priced for everyone.
-
A?relay?is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current.
-
JSN-SR04T Waterproof Ultrasonic Sensor Module
Original price was: ₨1,400.00.₨1,299.00Current price is: ₨1,299.00. Quick View- Operating Voltage: 5V DC
- Static Operating Current: 5mA
- Operating Current: 30mA
- Acoustic Emission Frequency: 40kHz
- Maximum range: 4.5m
- Minimum range: 25cm
- Connection pins: +5V, Trig, Echo, GND
- Module Dimensions: 41mm * 28.5mm
- Sensitivity: ~0.5cm
- Sight Angle: <50
- Operating Temperature: -10 ~ 70 C
- Storage Temperature: -20 ~ 80 C
-
INTRODUCTION
This product includes 3-pin 2.0mm(0.08″) mating connector housing(10 units) and crimp pins (30 units).They work with wires ranging from 28 to 26 AWG. -
JZQ-599B Soldering Iron Bit/Tip Cleaning Sponge Cleaner High Temperature Enduring Cleaner Sponge For Electric Welding Soldering Iron
Original price was: ₨780.00.₨599.00Current price is: ₨599.00. Quick View- Cleaning Ball: High-quality brass
- Base: Heavy-duty stainless steel
- Compact and portable, ideal for workbenches
- Anti-slip base for enhanced stability
- Base Diameter: 70 mm (2.75 inches)
- Height: 60 mm (2.36 inches)
- Works with most standard soldering iron tips
-
K Type Waterproof Thermocouple
Original price was: ₨599.00.₨459.00Current price is: ₨459.00. Quick View- Premium quality: Waterproof insulation lead, rustproof with stainless steel material and fiberglass.
- Good performance: Wire can withstand 400℃ high temperature.
- Application: It consists of two different conductors that produce a voltage proportional to a temperature difference between either end of the pair of conductors.
- 2 terminals: K-type thermocouple with flexible spring, 2 terminals for easy connection.
- Multi-purpose: Widely used for industrial or laboratory testing equipment temperature.
- Use: Fits all temperature controllers.
-
K2045 Mosfet 2SK2045 TO-220F FET K2045 NPN
Original price was: ₨50.00.₨40.00Current price is: ₨40.00. Quick ViewLow ON resistance. Ultrahigh-speed switching. High-speed diode built in.
-
KBL406 5-600V 4A Bridge Rectifier
Original price was: ₨45.00.₨39.00Current price is: ₨39.00. Quick ViewBridge rectifier diode with a 4A current rating.
-
Bridge rectifier diode with a 6A current rating.
-
KBPC3502 Bridge Rectifier Diode 35A 200V
Original price was: ₨200.00.₨179.00Current price is: ₨179.00. Quick ViewBridge rectifier diode with a 35A current rating.
-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×3 type 12 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipment’s, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed.
-
An 8GB small card hard drive.
-
- Capacities1: 32GB
- Speed 3:
- 32-128GB – 10MB/s – 20MB/sread
- Dimensions: 44.9mm x 20mm x 9.2mm
- Operating Temperature: 0C to 60C
- Storage Temperature: -20C to 85C
- Compatible with: Windows10, Windows 8.1, Windows 8, Windows 7.1 (SP1), Mac OS v. 10.9.x+, Linux v. 2.6.x+, Chrome OS
-
- Using 5050 full-color LED.
- RGB tricolour current一limiting resistance to prevent burnout.
- Through the PWM adjusting three primary colors can be mixed to obtain different colors.
- With a variety of single一chip interfaces.
- Working Voltage: 5V.
- LED Drive Mode: Common cathode driver.
-
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression
-
L293E Push-Pull Four Channel Drivers
Original price was: ₨240.00.₨220.00Current price is: ₨220.00. Quick View- OVERTEMPERATURE PROTECTION
- OUTPUT CURRENT 1A PER CHANNEL
- INHIBIT FACILITY
- PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive)
- SEPARATE LOGIC SUPPLY
- HIGH NOISE IMMUNITY
-
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm -
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
-
Large 20mm LDR Photoresistor Sensor Photo Sensor
Original price was: ₨300.00.₨149.00Current price is: ₨149.00. Quick View- Diameter: 20mm
- Max Voltage: 500V
- Max power consumption: 500mW
- Operating Temperature: 30+70C
- Light Resistance: 5-100K ohm
- Dark Resistance: 1-8M ohm
-
Laser Diode Module 650nm 5v Laser Light Module Ky008
Original price was: ₨180.00.₨99.00Current price is: ₨99.00. Quick View- Voltage: 3.0 V – 5 V.
- Output: red laser straightly(650nm).
- Driver: APC circuit.
- Size: Φ 12.0 x35mm.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating temperature: -36 ~ 65◦C.
- Pot size: 15 meters spot for φ10 mm ~ φ15.
- Outer diameter: 6 mm.
-
LCD Green 20×2 display module (JHD202C)
Original price was: ₨315.00.₨252.00Current price is: ₨252.00. Quick View- Color of display: Green
- Color of character: Yellow
- Size : 20 x 2 (20 character x 2 rows)
- Input voltage: +5V
- Supply current: 1.5mA
- Board dimensions : 116mm x 38mm (LxB)
- Display dimensions : 83mm x 19mm (LxB)
-
LCD I2C Module IIC/I2C Serial Interface Adapter
Original price was: ₨300.00.₨219.00Current price is: ₨219.00. Quick View- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
-
LCR T4 Transistor Tester ESR Meter
Original price was: ₨3,600.00.₨1,999.00Current price is: ₨1,999.00. Quick ViewSpecifications:
Material: Printed circuit board
Power Mode: 6F22
Display: 128 * 64 LCD backlight
Testing Speed: 2 seconds (1 minute is normal for large capacitor)
Shutdown Current: 20nA
Displayed Value: 25pf-100mF (resolution 1pF)
Inductance: 0.01mH-20H
Resistance: 2100
Power Volatge: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack
Resolution of Resistance Measurement: 0.1 ohms
The Highest Measured Value: 50M ohms
Provided Testing Current: Approx. 6mA
-
- Camera Exposure control
- Auto slide focus dual cell
- Photocopy machines density of toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales dual cell
- Automatic gain control modulated light source
- Automated Rear View Mirror
-
-
Led High Light Led Bar Light 4V 18 Led Smd Led Strip Light
Original price was: ₨70.00.₨59.00Current price is: ₨59.00. Quick View- voltage: DC 4V
- Stand material: High quality aluminum
- chip : 5730 6led
- color: white
- size:4cmx1.5cm
- life:>50000hours
-
LED Industrial Signal Tower Light 3 Colors Flash LED Light Warning Lamp for CNC Machines
Original price was: ₨5,400.00.₨2,799.00Current price is: ₨2,799.00. Quick View- Made of high-quality material and an LED bulbs, this warning light is durable.
- High brightness LED light sources can attract more attention.
- Low power consumption, low heat, long lifespan.
- Normally-on type lighting in red, orange, and green color.
- Suitable for workshop, construction site, factory, sentry box, etc.
-
High quality casing in minimal cost.
-
Features:
- Super bright light source: Our 5 inch LED light bar contains 24pcs * 3W LEDs and emits 6000K brilliant white light.
- Excellent performance: It is made of aluminum diecasting housing and unbreakable PC lens. Waterproof, dustproof and rustproof ensure that these lights are very durable to use.
- High efficient cooling: The design system of multilayer heat sink solves the problem of heat after longtime working. Effectively extend the Bar’s life-span to over 50,000 hours.
- Wide applications: 10-48V wide range voltage can apply to different types of vehicles and devices such as Heavy Duty, SUV, ATV, UTV, Truck, Car, Boat, Marine etc.
- Easy installation: It is easy to install with the mounting brackets included in our item.
-
LED SMD 5m Strips Blue color:
*Easy to Use:
Self-glue back with tape for protected and simple application.
* Cuttable and attachable:
Each 3 LEDs along the cut imprints and, without harming the rest strips.
* Flexible:
Slight and, conservative and adaptable PCB strip.
* Eco-friendly:
Low power utilization and, very brilliant however having in low temperature.
-
LED SMD Strip 5m Size In Green Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View- Weather-resistant IP65 Adhesive back 3M Brand
- Clear silicone strip 10×2.8mm Total Length 5 Metres
- Can be cut into 50mm lengths with 3 LEDs each.
- 450 Lumens/M, 500mA/M, 60 LEDs/M (per metre)
- LED 5050×300 total. CE, ROHS, and UL certified
- Terminates to two wires. 12Vdc @ 3A Total 5M
- 450 lumens per meter
- 10mm wide x 2.8mm high
-
LED SMD Strip 5m Size In Red Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View- Working Voltage: DC12V
- LED Type: SMD5050/SMD2835
- LED Quantity: 60leds/m, 120leds/m, 5 meters/rollWidth : 8mm (SMD2835) /10mm (SMD5050)
- Protection Rate : Waterproof IP65 /Non waterproof IP20
- Color: Red
- Is Dimmable: Yes (dimmer switch required, but not included)
- Is Trimmable: Yes (cuttable every three LEDs)
- View angle: 120~140
- Working Temperature: -20C to 50 C
-
LED SMD Strip 5m Size In White Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View -
LED Tester Pen Light Screwdriver Multifunction Dual LED AC-DC High-Brightness
Original price was: ₨1,150.00.₨789.00Current price is: ₨789.00. Quick View- Measuring range: 70-250V
- Nib material: 45 steel
- Shell material: ABS
-
The LF33CV is a very low drop voltage regulator. It has an output voltage of 3.3 V and a output current of 500 mA. Input voltage range 2.5V to 16V. It is suitable for low noise, low power applications and specially in battery powered systems.
-
Light Sensitive LDR Relay Module 12V
Original price was: ₨600.00.₨469.00Current price is: ₨469.00. Quick View- Automatically controls the relay based on light intensity
- Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
- Adjustable light level set-point
- Controls loads of 115/230VAC @ 10A
- Controls loads of 0 15VDC @ 10A
- Both NO (Normally Open) and NC (Normally Closed) contacts
- LED indicator when the relay is energized
- 12V power operation
-
LiitoKala Lii-500 18650 Smart Battery Charger LCD Display
Original price was: ₨8,000.00.₨5,799.00Current price is: ₨5,799.00. Quick View– 4 independent charging channels with built-in micro-computer management system to ensure the high efficiency
– USB output function: Built with 5V / 1000mAh output
– 300mA / 500mA / 700mA / 1000mA charging current for selection
– CC / CV charge mode to maintain a constant current flow and protect battery and users’ safety
– full Fledged LCD display with a variety of info
– Refresh function for 0V battery
– Quick test mode – 4 channels detect the battery capacity quicker than the Nor mode
– Identifies broken batteries, 0V rechargeable battery activation, can’t charge 1.65 – 1.85V batteries
– Protections: over-charge, over-discharge, reverse polarity, short circuit protections, temperature control
– Charging between 1.65 – 2.2V / bad battery recognition and activation
-
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
-
Specification:
- Minimum Capacity: 1000mAh
- Battery Voltage: 11.1V / 3Cell
- Constant Discharge: 25C (25Amps)
- Peak Discharge (10sec): 35C (66Amps)
- Pack Weight: 141g
- Pack Size: 78 X 33 X 19mm
- Charge Plug: JST-XH
Weight
:
<b>141 GRM
-
Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high temperature condition.
- Don’t throw it into fire.
- Don’t throw it into water.
-
TCB 2200mAh 11.1V 25C 3S Lipo Battery XT60 Plug For RC Models
-
Oriainal Lion Power Lipo Battery 11.1V 2200Mah 25C MAX 40C T Plug for RC Car Airplane Align Trex 450 Helicopter Part
-
Features:
The Turnigy 2650mAh Transmitter pack fits snuggly into any Futaba or Jr radio which uses a 4×4 AA cell battery configuration
-
Features:
Black Magic 2700mAh 11.1V 25C LiPo Battery for DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time, enjoy more flight fun!
-
Features:
For DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time
Suitable for CX-20, Quanum Nova Quadcopter
Special for DJI PHANTOM 1 and FC40 Quadcopter,improve about 30% flight time than original battery
Well-designed,have a special handle for take out the battery easily -
3S 11.1V 3300mah 35C?Lipo Battery with hardcase?For 1/10th RC Car Boat ?.
-
Capable of maximum continuous discharge rates up to 25C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance.
-
LiPo 11.1V 3S 2200mAH
Original price was: ₨11,000.00.₨7,399.00Current price is: ₨7,399.00. Quick View- Name: LiPo Battery
- Quantity: 1 Piece
- Capacity: 2200mAh
- Type: Lithium Polymer
- Voltage: 11.1V/3S
- Burst Rate : 25C
- Continuous discharge rate: 25C
- Cells : 3
- Size : 85 x 40 x 27 mm
- Weight: 180g
- Max Burst Discharge: 60C
- Charge Voltage: 12.6V
- Discharge Plug: T Plug, Balance charger plug
-
Features:
Capable of maximum continuous discharge rates up to 50C,burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there?s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
-
Battery item: LION Power 7.4V 90M 25C
Capacity:900mAh
Continuous discharge rate:25C
Size: Length 57mm x Width 30mm x Height 14mm
Plug style: Blance charger,T Plug
Colors: Standard Colors




























































































































































































































