-
Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines.
-
3.5 inch TFT Touch Screen for Arduino Mega
Original price was: ₨1,560.00.₨1,508.00Current price is: ₨1,508.00. Quick ViewFeatures:
Name
Parameter
Display Color
RGB 65K color
Screen Size
3.5(inch)
Type
TFT
Driver IC
ILI9488
Resolution
480*320 (Pixel)
Module Interface
4 Wire SPI Interface
Active Area (AA area)
48.96×73.44(mm)
Module PCB Size
56.34×98(mm)
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
VCC power voltage
3.3V~5V
Logic IO port voltage
3.3V(TTL)
Rough Weight(Package containing)
With touch: 57 (g)
-
3.5″ IPS TFT LCD for Arduino MEGA2560
Original price was: ₨5,200.00.₨4,055.00Current price is: ₨4,055.00. Quick View- Screen size 3.5″ – 480 X 320 Pixels
- Support Arduino Mega2560 directly
- Control IC: ILI9846
- Compatible with 3.3/5V operation voltage level
- Full-angle IPS TFT panel
- With SD card Socket
- Interface: 16 Bit parallel interface
-
Features:
- Connector plug
- Connector type Jack 3,5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
-
This battery is genuinely the most recent in battery-powered innovation. It is incredibly meager, light, and very dainty contrasted with any battery-powered science. Low weight, little size yet enormous limit. The other benefit of lithium polymer innovation is extremely low self-release.
-
3.7V 250mAh Li Polymer Battery 502030
Original price was: ₨416.00.₨311.00Current price is: ₨311.00. Quick View1> 100% brand new2> High quality and high capacity!3>Built-in protection circuit PCM to prevent overcharging or over-discharging4> Size: 5mm(H)*20mm(W)*30mm(L)5> Rating: DC3.7V 250mAh -
- 100% brand new
- High quality and high capacity!
- Built-in protection circuit PCM to prevent overcharging or over-discharging
- Size: 4mm(H)*25mm(W)*30mm(L)
- Rating: DC3.7V 300mAh
- Charging current: standard charging, fast charging: 1.0C: 0.5C
- Standard charging method: 0.5C CC (constant current) charge to 4.25V, then CV (constant voltage 4.2V) charge till charge current is less than or equal to 0.05C
- The maximum charge current: 1C
- Maximum discharge current: 1C
- Discharge cut-off voltage: 2.75V
- The discharge temperature: -20 degrees C~+60 degrees C
-
3.7V 400mAh Lithium Polymer LiPo Rechargeable Battery
Original price was: ₨364.00.₨343.00Current price is: ₨343.00. Quick View- Size: 502040 052040
- Type: Rechargeable
- Voltage: 3.7V
- Chemiacl Composition: Lithium polymer
- Customize: Yes
- Application: use for communication,office,portable
- Battery weight: 7g/Pcs
- Nominal Capacity: 400mAh
- Battery size: thickness:5mm width:20mm Length:40mm
-
3.7V 500mAH Lithium Polymer Battery
Original price was: ₨519.00.₨415.00Current price is: ₨415.00. Quick View3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo or Lipoly batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in GPS, DVD, ipod, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
-
- Ultra-thin design.
- Nominal Voltage: 3.7 V
- Nominal Capacity: 80 mAh
- Low internal resistance
- Sufficient battery capacity
- Outstanding cycle life
- Optimized PCM design
- In series connection or in parallel connection is allowed
- Excellent safety.
- Battery Chemistry: Li Ion Polymer
- Battery Terminations: PC Pins (Horizontal) / (Vertical), SMT (SMD) Mount, Solder Tabs, Wires, Cables with Connectors.
-
Propellers generate thrust by spinning and moving air. High accuracy, well balanced.
-
- Body Material: plastic
- Working fluid: air, water, oil
- Type: normally closed
- Take over pore diameter: 3/4inch
- Operating Viscosity: Under 20CST
- Seal Material: NBR
- Voltage : 12VDC
- Pressure range : 0kg/cm2 10kg/cm2
- Fluid temperature : -5 ? 100 ?
-
30 Watt 220V or 12V DOB(Direct On Board) LED Bulb Raw Material WHITE Color Light Electronic Hobby Kit
Original price was: ₨260.00.₨228.00Current price is: ₨228.00. Quick View- Power Output: 30 Watts
- Input Voltage: 220V AC or 12V DC
- Light Color: White
- Technology: Direct On Board (DOB) LED
- Efficiency: High luminous efficacy for optimal brightness
- Assembly: DIY assembly required
- Components: Includes all necessary electronic components for assembly
- Instructions: Comprehensive assembly instructions included
- Usage: Suitable for electronic hobbyists, DIY enthusiasts, students, and professionals
- Applications: Ideal for workshops, projects, showcases, and various lighting applications
- Versatility: Can be customized and adapted for different setups and configurations
- Ease of Use: User-friendly design for easy assembly and installation
- Quality: High-quality materials ensure durability and reliability
- Safety: Designed with safety in mind, adhering to relevant electrical standards and regulations
-
300W 20A Step Down Converter Voltage Buck Module
Original price was: ₨2,080.00.₨1,507.00Current price is: ₨1,507.00. Quick View- Color: multicolor
- Material: electronic component
- Item size: approx.60*50*30MM
- Input Voltage: 6V to 40V DC(10V to 40V is suggested)
- Output Voltage: 1.2V to 36V DC
- Output Current: 20A(max.), 15A(suggested)
- Efficiency: 95%(24V to 12V, 20A)
- Output Ripple: 50mV
- Wiring Method: Terminal
- Short Circuit Protecting: Self-recovery(cannot short circuit for long time)
- Size: approx. 60 x 53 x 27mm / 2.36 x 2.08 x 1.06′
- VO+: Output positive
- VO-: Output negative
- +IN: Input positive
- -IN: Input negative
- CV: Output voltage adjustment
- CC: Output current adjustment
- EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
- When input and output is common grounded, no-load CV output constant voltage, CC output constant current.
-
300W XL4016 DC-DC Max 9A Step Down Buck Converter 5-40V To 1.2-35V Adjustable Power Supply Module LED Driver
Original price was: ₨1,300.00.₨873.00Current price is: ₨873.00. Quick View-
Input Voltage: 5V – 40V DC
-
Output Voltage: Adjustable 1.2V – 35V
-
Maximum Output Current: 9A
-
Maximum Power: 300W
-
High Efficiency: Up to 95%
-
Switching Frequency: 180kHz (low heat, high stability)
-
Output Type: Constant Current / Constant Voltage
-
Ripple: Low ripple output, perfect for sensitive electronics
-
-
This is a 32.768 MHZ Crystal. This is a low cost crystal oscillator with oscillation frequency of 32.768 MHZ. Crystal are normally required to provide clock pulses to your micro-controller or other ICs which require external clock source. An oscillator crystal has two electrically conductive plates, with a slice or tuning fork of quartz crystal sandwiched between them. The crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. Quartz has the further advantage that its elastic constants and its size change in such a way that the frequency dependence on temperature can be very low.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
35W LED Chip with Capacitor Driver AC 220V input – Light Colour White High Quality
Original price was: ₨520.00.₨260.00Current price is: ₨260.00. Quick View- Power Output: 35 Watts
- Input Voltage: AC 220V
- Light Color: White
- Technology: LED Chip with Capacitor Driver
- Efficiency: High luminous efficacy for optimal brightness
- Quality: Manufactured using high-quality materials for longevity and reliability
- Installation: Easy installation with integrated capacitor driver
- Applications: Versatile usage suitable for indoor and outdoor lighting projects
- Compatibility: Works seamlessly with AC 220V input, ensuring hassle-free operation
- Durability: Built to withstand frequent use and various environmental conditions
- Safety: Designed with safety features to prevent overheating and electrical hazards
- Versatility: Suitable for residential, commercial, and industrial lighting applications
- Energy-efficient: Consumes less power compared to traditional lighting solutions, helping reduce energy costs and environmental impact
- Certifications: Compliant with relevant safety and quality standards, ensuring peace of mind for users.
-
37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
Original price was: ₨3,120.00.₨2,703.00Current price is: ₨2,703.00. Quick ViewThis 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
-
377 Silver Oxide Button Cell Battery, 1.5 V Get the durable, reliable power that keeps going with this Cell Battery. It delivers long-lasting power to your button-battery-operated devices, from household electronics like keyless entry systems, to e-books, toys, calculators, and watches, to heart rate and glucose monitors. These zero-mercury coin batteries can hold power for up to five years in storage.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- 3DR Mini OSD MAVLink Protocol (Compatible with APM/ SPM2.6/ APM2.65)
- Compatible with APM/ SPM2.6/ APM2.65 flight controls.
- Power supply : 12V
- DC Dimension : 43 x 21mm
- Weight : 4.7g
-
- Cable Zip Ties Contains: Tie wraps 3 INCH
- Pure new PA66 nylon material, the cable tie is made of approved UL66 nylon new High tensile strength and A high degree of flexibility that does not break easily, is safe and is environmentally friendly.
- length: 6Inch, Max tensile strength: 40 LBS tensile strength is determined by width and thickness. Our ties are widest, compared to most ties on the market Durable Nylon Ties and heat resistance of the heavy-duty cable tie tape package, which can ensure that they are exposed to high temperatures for a long time, suitable for indoor and outdoor use, safe self-locking buckle can be easily locked in place, cable tie tape conforms to RoHS standard/UL certification UL 94 V2. Same size, but suitable
- In daily life, multi-purpose cable zip ties are so powerful that you can tie them together to wrap materials, repair plant branches, and repair garden fences. In offices and studios, they can be used to organize wires and hang LED lights and banners. You can even do some DIY ideas: make butterflies or fish for children; Show off your stylish tie wrap design.
-
3mm Frosted LEDs bright 3mm LEDs are incredibly bright with a wide beam angle. They’re suitable for use in your projects, illuminations, car lighting, models or anywhere where you need low power, high-intensity reliable lighting or indication. They fit easily into a breadboard and will add that extra zing to your project.
The lens has a frosted effect, which distributes the light evenly. Excellent for use in all types of indicators where an unfocused light is desirable. They work well mounted in our 3mm LED Holders and the light produced from the Red, Green, Blue, Yellow, or White LED appears very crisp and clean.
-
- Infrared Transmitter/Emitter
- 3mm in diameter
- Wavelength: 940nm
- Anode: Long pin (small flag)
- Cathode: Short pin (big flag)
-
3pcs 20mmUltrasonic Humidifier Ceramic Disc With Key
Original price was: ₨623.00.₨446.00Current price is: ₨446.00. Quick View- Specifications Of 3pcs 20mm Ultrasonic Mist Maker Ceramic Disc + Key for Atomizer Fogger Replacement: High-quality 20mm Atomization Piece for mist maker.
- This piece is a ceramics chip, and it is durable.
- Easy to change and install, if the piece is scaled, please clear it with a soft cloth.
- Disc Size: 20mm
- Key size(both ends):16mm-20mm Package Includes:
- 3 X 20mm Ceramic Disc
- 1 x Key
-
1500mAh rating high discharge LiPo battery
-
3S 20A BMS Module for Lithium Batteries
Original price was: ₨499.00.₨176.00Current price is: ₨176.00. Quick View- Charging voltage: 12.6 V-13 V
- Overvoltage range: 4.25-4.35 V 0.05 V
- Overvoltage range: 2.3-3.0 V 0.05 V
- Maximum operating current: 5A-6A
- Upper instantaneous current limit: 8A
- Current: less than 30uA
- Internal resistance: less than 45 M
- Service life: more than 50000 hours
- Operating temperature: -40 to + 50 degrees
- Storage conditions: -40 to + 80 degrees
- Size: 50 * 16 * 1 mm
- Protection against short circuit: protection, self-healing delay
-
5200mAh rating high discharge LiPo battery
-
3V-12V DC Micro Toy Motor, DC Motor Mini Electric Motor for CD-ROM DVD-ROM and DIY Toys
Original price was: ₨94.00.₨41.00Current price is: ₨41.00. Quick ViewBuy best quality DC Motor at the minimal rates from Electronation.
- Motor diameter: 25mm
- Motor casing height: 13mm
- Motor shaft diameter: 2mm
-
4 Bits TM1637 Digital Tube LED 7 Segments Display Module
Original price was: ₨364.00.₨259.00Current price is: ₨259.00. Quick View4 Bits TM1637 Digital Tube LED 7 Segments Display Module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
-
4 cell 18650 Battery Holder Case
Original price was: ₨229.00.₨113.00Current price is: ₨113.00. Quick View- Battery Type: 18650 Lithium-Ion
- Capacity: 4 Cells (15V output)
- Dimensions: 7.6cm x 8cm x 1.9cm
- Mounting Holes: 2x screw holes
- Weight: 26g
-
4 digit 7 segment Display for Digital Clock
Original price was: ₨156.00.₨103.00Current price is: ₨103.00. Quick View- Reverse Voltage(Vr): 5 V
- Reverse Leakage Current (Ir): 50A
- Forward Current (If): 25mA
- Peak Forward Current (Ifp): 100 mA
- Power Dissipation (P): 100 mW per Segment
- Operating Temperature (Top): -40C to +80C
- Storage Temperature (Ttsg): -40C to +85C
- Lead Soldering Temperature: 260C
-
This is a simple four wire cable. Great for jumping from board to board or just about anything else.
-
4 Pin Crimp Shell Wire | Straight Connector
Original price was: ₨78.00.₨51.00Current price is: ₨51.00. Quick ViewThis is a simple four wire cable. Great for jumping from board to board or just about anything else.
-
Buy low price, high quality4 position terminal block.
-
4 Way IR Line Tracking / Following Sensor Module
Original price was: ₨510.00.₨457.00Current price is: ₨457.00. Quick View- Operating Voltage: 3.3-5V
- Fixing Screw Hole: M3
- Distance setting from 1mm to 10cm
- Control Card Dimensions: 42x38x12mm
- Sensor Dimensions: 25x12x12mm
- Card Output: Digital
-
4-Inch 12V DC Brushless Cooling Fan
Original price was: ₨260.00.₨207.00Current price is: ₨207.00. Quick View- Input Voltage: 12VDC
- Current: 0.45A
- Noise: 36.5dBA
- Weight: 145g
- Wire Gauge: 26AWG
- RPM: 2200RPM @ 12VDC
- Air Flow: 80.6 CFM
- Dimensions: 120 x 120 x 25mm
- Wire Length: 40cm
- Ball Bearing mounted
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Inductor is a passive two-terminal component that temporarily stores energy in the form of a magnetic field. It is usually called as a coil. The main property of an inductor is that it opposes any change in current.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Size 4Inch
- Type: self-locking nylon cable tie
- Material: Nylon66 Cable Tie
- Feature: Heat resistant, erosion control, insulate well.
- Operation Temperature: -40c to 85c
- Colour: Natural (white or standard color), UV black.
- Package: Polybag + Label
- To keep all wires in place this product is what u are waiting for.
-
A type of fastener, for holding items together, primarily electrical cables or wires. This is 4″ long in length.
-
400W 15A DC Step Up Booster DC Boost Converter
Original price was: ₨1,663.00.₨1,351.00Current price is: ₨1,351.00. Quick View -
The 4072 is a member of the 4000 Series CMOS range, and contains two independent OR gates, each with four inputs.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Inductace: 47uH
- Tolerance: +-10%
- Maximum DC Resistance:30ohm
- Maximum DC Current:0.796A
- Power rating: ½ W
- Mounting Type: Surface Mount
- Operating Temperature: -40°C ~ 100°C
- Size: (5.00mm x 12.00mm)
- Height – Seated (Max):0.276″ (7.00mm)
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Ceramic Type Capacitor
- 470pf (471)
- Volt; 50V
- Capacitor Tolerance: 10%.
- Color: As pictures
- Structure: Fixed capacitors
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
4mm Panel Mount Banana Socket Female for Power Supply
Original price was: ₨94.00.₨57.00Current price is: ₨57.00. Quick View- Banana jack socket.
- Material: bronze.
- In the box-shaped insulator ABS.
- Nickel-plated surface.
- Diameter: 4 mm.
- The voltage / current: 30vac – 60VDC / max.10a
- Weight: 6.5g
-
The 4N25 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a photo-transistor.
-
4S 30A LiFePO4 Balanced Charging BMS PCB Board – High-Performance BMS for 12.8 V Battery Packs
Original price was: ₨1,581.00.₨706.00Current price is: ₨706.00. Quick View-
Compatible with 4S (4-cell) LiFePO4 battery packs (12.8V nominal)
-
30A continuous discharge current for high-performance load handling
-
Peak discharge current: up to 60A (for short duration)
-
Charge voltage per cell: Max 3.65V
-
Overcharge detection voltage: 3.75V ± 0.05V
-
Overcharge release voltage: 3.65V ± 0.05V
-
Over-discharge detection voltage: 2.5V ± 0.1V
-
Over-discharge release voltage: 2.8V ± 0.1V
-
Balance function: Yes (Passive balancing)
-
Balance voltage: 3.5V
-
Balance current: ~30mA
-
Short-circuit protection: Yes (Auto recovery)
-
Overcurrent protection: Yes (~1ms response time)
-
Operating temperature range: -20°C to 70°C
-
Storage temperature range: -40°C to 80°C
-
Ultra-low standby power consumption
-
Compact size: approx. 50mm x 22mm x 4mm (may vary slightly)
-
Waterproof and corrosion-resistant PCB coating (based on model)
-
-
4v Battery 600mAh 0.6A Lead Acid Rechargeable
Original price was: ₨208.00.₨165.00Current price is: ₨165.00. Quick View- Sealed construction, safety, and no leakage
- Maintenance-free, convenient for installation
- Broad operating temperature range
- High capability, high energy density
- Low self-discharge rate, more deep cycle times
- Long service life, Excellent recharge, and discharge performance
-
4v Battery 800mAh 0.8A Lead Acid Rechargeable
Original price was: ₨260.00.₨207.00Current price is: ₨207.00. Quick View- Sealed construction, safety, and no leakage
- Maintenance-free, convenient for installation
- Broad operating temperature range
- High capability, high energy density
- Low self-discharge rate, more deep cycle times
- Long service life, Excellent recharge, and discharge performance
-
Features:
– Simple mechanical structure, easy for installation.
– Adopts 4 decelerate DC motors, ensuring flexbility and good direction.
– Large and stable Chassis, easy for expansion.
– speed test encoding disk.
– recommend use L293D 4 motors driver board and 4 Channel Infrared Detector Tracked Photoelectricity Sensor Obstacle Avoidance -
- Keypad Layout: 4×4 matrix layout, consisting of 16 keys arranged in four rows and four columns.
- Size: Typically measures 76mm x 69mm (Length x Width).
- Number of Keys: 16 programmable keys, each with a unique position in the matrix.
- Input Method: When a key is pressed, it generates a unique combination of row and column signals, which can be decoded to identify the pressed key.
- Interface: Typically interfaces with microcontrollers or embedded systems using digital I/O pins.
- Material: Made of durable and lightweight materials suitable for various environments.
- Compatibility: Compatible with a wide range of microcontrollers and development boards.
- Application: Commonly used in projects requiring user input, password entry, or menu navigation.
-
5 Inch Touch Screen HDMI LCD for Raspberry Pi HDMI LCD
Original price was: ₨9,360.00.₨8,319.00Current price is: ₨8,319.00. Quick View- Dimensions: 133mm x 76mm x 7mm
- Power: 5 V Power via USB Micro
- Resolution: 800×480
- Current: Less than 150 mA
- Display Type: 5 inch TFT LCD
- Touchscreen: USB Resistive
- Interface: HDMI USB 2.0 Full Speed
- Weight Without Package: 120 g
- Weight With Package: 140 g
-
- Drive Type: Piezo Discs
- Resonant frequency(kHz): 3.0~5.0+/- 0.5 KHz
- Resonant impedance (ohms): 300 max
- Diameter: 10mm/ 0.39 inches
- Thickness: 0.3mm/ 0.01 inches
- Wire Length: 40mm/ 1.57 Inches
- Material: Brass
- Color: As shown
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
5.1V Zener diode 0.5W Zener diode 5.1 V 1/2W
Original price was: ₨16.00.₨10.00Current price is: ₨10.00. Quick View5.1V Zener diode 0.5W Zener diode 5.1 V 1/2W are useful for creating a reference voltage or as a voltage stabilizer for low-current applications. These diodes are rated for 5.1 volts with a maximum of 1W. 24V 0.5W 5% Semiconductor.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
500K Ohm Rotary Potentiometer / Variable Resistor
Original price was: ₨52.00.₨41.00Current price is: ₨41.00. Quick View500K Ohm Rotary Potentiometer / Variable Resistor is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
- Multi-turn / Cermet / Industrial / Sealed
- 5 terminal styles
- Tape and reel packaging available
- Chevron seal design
- Mounting hardware available (H-117P)
- RoHS compliant
-
50A SCT-013-000 Non-invasive AC Current Clamp Sensor
Original price was: ₨1,872.00.₨1,299.00Current price is: ₨1,299.00. Quick View- Input Current: 0~50A AC
- Output Mode: DC 0~1V
- Non-linearity:2-3%
- Build-in sampling resistance(RL): 62Ω
- Turn Ratio: 1800:1
- Resistance Grade: Grade B
- Work Temperature: -25°C ~ ﹢70°C
- Dielectric Strength(between shell and output): 1000V AC/1min 5mA
- Leading Wire in Length: 1m
- Open Size: 13mm x 13mm
-
50Amp Digital DC Volt/Amp Meter
Original price was: ₨2,184.00.₨1,247.00Current price is: ₨1,247.00. Quick View- Its working voltages range from 4 to 30 volts DC.
- DC 0 to 100V is the measurement voltage.
- It has a 0.1V minimum resolution.
- It has a 50A measuring current.
- Its minimum resolution is 0.1A.
- It has a higher operating current than 20mA.
- Digital tube with three LEDs, 0.28 inch
- Its display color is red.
- It has a refresh rate of about 300 milliseconds per second.
- It has a 1% measurement precision. (+- one digit)
- It can operate at temperatures ranging from -10 to 65 degrees Celsius.
- For non-condensing, the operating humidity rate is 10 to 80 percent.
- Its working pressure ranges between 80 and 106 kPa.
-
50g/100g Solder Wire Dia 0.8 Flux 2% Vectra Green High Tin 70/30 Soldering Wire Roll
Price range: ₨363.00 through ₨758.00 Quick View✅ High Tin 70/30 Composition for Superior Strength
✅ Diameter: 0.8mm – Ideal for Precision Soldering
✅ 2% Flux Core for Smooth and Clean Soldering
✅ Available in 50g & 100g Rolls
✅ Fast Melting with Minimal Residue
✅ High Electrical Conductivity for Reliable Joints
✅ Anti-Corrosion Properties for Long-Lasting Performance
-
- Resistance: 503 50K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
50W Ceramic Heater Heat Emitter Lamp Incubator
Original price was: ₨727.00.₨519.00Current price is: ₨519.00. Quick ViewThis 50w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
52mm Omnidirectional Wheel (Brass Bearing for Rollers)
Original price was: ₨1,716.00.₨1,247.00Current price is: ₨1,247.00. Quick View52mm Omnidirectional wheel is unique as they are able to roll freely in two directions. It can either roll like a normal wheel or roll laterally using the wheels along its circumference. Omni-direction wheels allow a robot to convert from a non-holonomic to a holonomic robot. A non-holonomic robot that uses normal wheels has only 2 out of 3 controllable degrees of freedom which are, moving forward/backward and rotating. Not being able to move sideways makes a robot slower and less efficient in reaching its given goal. The holonomic Omni-directional wheels are able to overcome this problem, as it is highly maneuverable. Unlike a normal non-holonomic robot, the holonomic Omnidirectional robot can move in an arbitrary direction continuously without changing the direction of the wheels. It can move back and forth, sideways, and rotates at the same position.
-
- It works from a wide range of power supplies ranging from +5V to +18V.
- Sourcing or sinking load current is 200mA.
- The external components must be selected correctly, so that the timing intervals can be completed in several minutes along with the frequencies beyond several hundred kHz.
- The o/p of a 555 timer IC can drive TTL due to its high current o/p.
- It takes a temperature stability of 50 ppm/oC change in temperature (ppm means parts per million)
- The timers duty cycle is adjustable.
- The max power dissipation per package is 600 milliwatts & its reset and trigger i/ps has logic compatibility.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
5A 12V Mini Car Battery Charger with Ce RoHS (SON-1205B)
Original price was: ₨1,039.00.₨852.00Current price is: ₨852.00. Quick View- Positive and negative pole clamp connector
- Suspension wear mouth
- Cooling air outlet
- Work indicating lamp
- Electric plug
- Cheaper price version compared with SON-1205
-
- Made of a glass tube with nickel-plated-brass end caps.
- Fast Acting
- Size – 5mm x 20mm
- Voltage – 250V
- Current – 5A
-
5A Mini DC Motor PWM Speed Controller Module
Original price was: ₨416.00.₨176.00Current price is: ₨176.00. Quick ViewDC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer available at best price in Pakistan at Electronation Pakistan
- Working voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (MAX)
- Quiescent current: 7u A(standby mode)
- PWM duty ratio: 1%-100%
- PWM frequency: 20khz
- Size: 30*26mm
- Color: multicolor
- Material: electric components
-
5A XL4015 DC To DC Buck Converter Blue
Original price was: ₨624.00.₨311.00Current price is: ₨311.00. Quick View- 100% New and High-Quality 5A (5,000mA) 4-38V DC-DC Adjustable Step-Down Module
- Original XL4015 IC Power Supply Suitable for LED Strips, LED Matrix, and Other Circuits
- Wide Input Voltage 4V DC to 38V DC, Adjustable Output Voltage 1.25V DC to 36V DC
- Module Size: 54mm x 24mm x 15mm (l x w x h) Weight: 30 grams only with heat sink
-
5A XL4015 Module Adjustable Step Down Buck Converter
Original price was: ₨728.00.₨373.00Current price is: ₨373.00. Quick View- Module nature: non-isolated step-down module
- Rectification: Non-synchronous rectification
- Input voltage: 5V-32V
- Output voltage: 0.8V-30V
- Output current: adjustable Z large 5A
- Conversion efficiency: 95% (Z high)
- Switching frequency: 300KHz
- Output ripple: 50mV (Z large) 20M bandwidth
- Load regulation: 0.5% Voltage regulation: 2.5%
- Operating temperature: -40 C to + 85 C
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element.The position of the wiper determines the output voltage of the potentiometer. small screw driver can be used for calibration of resistance value.
-
5mm 4pin Piranha LED White Super Bright Green LED light NEW
Original price was: ₨26.00.₨16.00Current price is: ₨16.00. Quick View- High-Quality Construction: Crafted with precision and durability to ensure reliable performance.
- Clear Transparent Lens: Maximizes light transmission for optimal brightness and clarity.
- Easy Integration: Four pins for seamless installation into electronics projects.
- Low Power Consumption: Operates at a voltage of 2V and draws a current of 20mA for efficient energy usage.
- Versatile Applications: Ideal for indicator lights, mood lighting, decorative displays, and various electronics projects.
- Uniform Illumination: Delivers consistent and uniform light output for professional-grade results.
- Longevity: Engineered for durability and longevity, providing long-lasting performance.
- Vibrant Red Light: Enhances your creations with a striking and vibrant red glow.
-
- Type: 5mm Diffuse Led
- Colors: Red, Green, Yellow, Blue and Ultra-bright White
- Pot diameter: 5mm
- Shell Material: Epoxy
- Typical working voltage: 1.9 to 2 volts
- Typical current: 20mA
- Wavelength: 620 to 625nm
- Luminous intensity: 600 to 800mcd
- The angle of view: 45
- Number of pins: 2