-
TP4056 Lithium Battery 18650 Charger Module Micro USB
Original price was: ₨110.00.₨55.00Current price is: ₨55.00. Quick View- The current is approximately 1A adjustable.
- Charge precision is 1.5%.
- Input voltages are between 4.5V-5.5V.
- Full charge voltages are 4.2V.
- Led indicators are – red is charging and Green is full charged.
- Input interface consists of micro USB & welding points
- Work temperature is between -10° to +85°.
- No Reverse polarity protection
- Size- small to 25X19X10mm.
-
TP4056 Lithium Battery 18650 Charger Module Type C
Original price was: ₨110.00.₨59.00Current price is: ₨59.00. Quick View- The current is approximately 1A adjustable.
- Charge precision is 1.5%.
- Input voltages are between 4.5V-5.5V.
- Full charge voltages are 4.2V.
- Led indicators are – red is charging and Green is full charged.
- Input interface consists of micro USB & welding points
- Work temperature is between -10° to +85°.
- No Reverse polarity protection
- Size- small to 25X19X10mm.
-
TPA3118 60W 12V 24V PBTL Mono Digital Audio Power Amplifier Board Power AMP Module Car High Out Low Power
Original price was: ₨700.00.₨519.00Current price is: ₨519.00. Quick ViewFeatures:
- Sound quality is very good by using this module.
- Mono digital audio power amplifier chip.
- High output and low power consumption.
- Applicable speaker impedance: 4-8 ohm(8 ohm is the best).
Specifications:
- Working Voltage: DC 8-24V
- Power Output: 60W
- Applicable Speaker Impedance: 4-8 ohm
- PCB Board Size: 45 * 35mm / 1.77 * 1.4in
- Weight: 12g / 0.43oz
-
TPM10 Digital Thermometer LCD Digital Room Temperature Meter
Original price was: ₨450.00.₨239.00Current price is: ₨239.00. Quick View- Temperature range:-50C~ 110C
- Temperature display resolution:0.1C
- Temperature measurement accuracy:1C
- Sapling period:8 sec
- Power:2 x LR44 1.5v batteries
- Sensor cable length:1 meter (non removable)
- Colour:White
- Dimensions:47*28*14mm
- Weight:22g
- Wore Length: Around 2 Feet +
-
TQ-77 Soldering Gun 100WmaX
Original price was: ₨3,500.00.₨1,999.00Current price is: ₨1,999.00. Quick View- Two-Stage Heat-Switch System
- Easy heater-on check
- High-power ceramic heater
- Prevent fatigue
- 10 time higher power than normal
- Model TQ-77
- Voltage 110-130V, 220-240V AC 50/60Hz
- Power Consumption -High 100W / Low 20W (220-240V model)
- Insulation Resistance Over 100MΩ (500V DC)
- Heater Ceramic Heater
- Power Cord Length 1.5m
- Length 167mm –
- Weight 90g
-
Good Quality Transformer, power supplies for all kinds of project and circuit boards.
-
Good Quality Transformer, power supplies for all kinds of project and circuit boards available at electronation.pk in best price
-
Transformer 12V Center Tapped 3AMP
Original price was: ₨620.00.₨549.00Current price is: ₨549.00. Quick View- Output current: 3A
- Supply voltage: 220-230VAC
- Output voltage: 12-0-12VAC
- Soft Iron Core
- 1A Current Drain
-
A heat-sink is designed to remove heat from a transistor and dissipate it into the surrounding air as efficiently as possible. Heat-sinks take many different forms, such as finned aluminium or copper sheets or blocks, often painted or anodised matt black to help dissipate heat more quickly. Good physical contact between the transistor and heat-sink is essential, and a heat transmitting grease (heat-sink compound) is smeared on the contact area before clamping the transistor to the heat-sink.
-
Transparent Computers Acrylic Case With Cooling Fan For Raspberry Pi 4B 3.5 inch Display
Original price was: ₨1,200.00.₨899.00Current price is: ₨899.00. Quick View -
TSOP 1738 Sensor IR Receiver Plastic (SM0038)
Original price was: ₨90.00.₨59.00Current price is: ₨59.00. Quick View- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length 10 cycles/burst
-
TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor
Original price was: ₨250.00.₨95.00Current price is: ₨95.00. Quick View- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
- Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
- Response time (low power mode) : 220 mS
- Size : 24 x 24 x 7.2 mm
-
- Operating voltage: 2.0V to 5.5V
- Operating current: 1.5uA to 3.0uA
- Response time: 100ms to 220ms
- Sensitivity adjustment range: 0pF to 50pF
- Dimensions: 5mm x 5mm x 1.5mm
-
TTP224 4 Way Capacitive Touch Switch
Original price was: ₨599.00.₨199.00Current price is: ₨199.00. Quick View- Onboard TTP224 capacitive touch sensor IC 4 keys.
- 4 board-level status indicators.
- Input Operating voltage: DC 2.0V – 5.5V
- The module can set the output mode, the key output mode, the maximum output time, and fast/low power selection.
- Input with reverse polarity protection.
- LED Color: connected to Output pin
- Idle current: <10uA
-
- Name: Wire Strippers
- Weight:145g
- Color: As Picture Shown
- Package Content: 1* Wire Stipples
- Mode Number: YTH-1042
- 26,24,20,18,16AWG settings
- 0.2,0.35,0.5,0.9,1.25 MM settings
-
Tweezers Vetus TS-12 ESD 135mm
Original price was: ₨81.00.₨65.00Current price is: ₨65.00. Quick ViewHigh quality stainless steel tweezers designed to meet the requirements of the electronics and precision engineering industries.
Features
- Fine tip straight(135mm)
- Anti-magnetic
- Anti-acid Steel
- Non-corrosive Stainless Steel
-
The uA723 is a precision integrated-circuit voltage regulator, featuring high ripple rejection, excellent input and load regulation, excellent temperature stability, and low standby current. The circuit consists of a temperature-compensated reference-voltage amplifier, an error amplifier, a 150-mA output transistor, and an adjustable-output current limiter.The uA723 is characterized for operation from 0C to 70C.
-
- Current-Mode PWM controller
- Operating Voltage: 7.0V to 8.2V
- Output pin current: 1A
- Analog input range: -0.3 to 6.3V
- Oscillation Frequency: 52 Typically
- Gain: 3V
- Maximum source current: 22mA
- Low Output Voltage: 0.08V
- High Output Voltage: 13.5V
-
UGN3503 AH3503 Hall Effect Sensor
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick View- Extremely Sensitive
- Flat Response to 23 kHz
- Low-Noise Output
- 4.5 V to 6 V Operation
-
Made in Germany ”with a unique screw cap that prevents the glue from drying out, Glues strong, fast and durable, glides smoothly, For use at home, at school and in the office”
UHU the all purpose adhesive is ideal for household repairs, creative, handicraft work, school and office. Not to use on Styrofoam. Fast and strong , Crystal Clear, adjustable.
-
ULN 2803 is a high-voltage, high-current Darlington transistor array. The device consists of eight npn Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may be connected in parallel for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers.
-
- Seven Darlingtons per package
- Output current 500 mA per driver (600 mA peak)
- Output voltage 50 V
- Integrated suppression diodes for inductive loads
- Outputs can be paralleled for higher current
- TTL/CMOS/PMOS/DTL compatible inputs
- Inputs pinned opposite outputs to simplify
-
This is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.
-
Ultrasonic Mist Maker,12 LED Fogger 1A 24V With Adapter
Original price was: ₨2,150.00.₨1,479.00Current price is: ₨1,479.00. Quick View- Condition: 100% Brand New
- Material: ABS Plastic Shell
- LED Light Color: Red, Yellow, Blue(Multi-color Changing Light)
- Power: 1A/24V
- Adapter Voltage: 110~240V
- Atomizing Amount: 500ml/h
- Operating Temperature: +5~-45
- Suitable Water Depth: 4~6cm / 1.57~2.36in
- Mist Maker Size(Diam. * H): Approx. 4.6 * 2.5cm / 1.81 * 0.98in
- Atomizing Slice Diameter: Approx. 2cm / 0.79in
- Atomizing Head: Approx. 1.5cm / 0.59in
- Line Length: Approx. 1.4m / 55.1in
- Weight: Approx. 203g
-
- Power Supply : 5V DC
- Quiescent Current : <2mA
- Working Currnt: 15mA
- Effectual Angle: <15
- Ranging Distance : 2cm 400 cm/1x13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
-
- Seamless Integration with other components
- Made of superior grade material for long life
- Designed to contribute in the overall performance of the equipment
- Lightweight and durable, easy to match the ultrasonic sensor
-
- Universal multimeter accessory test lead kit
- Multimeter test lead kits include 2 module test probes, 2 group long insulated test cable, excellent anti-interference function
- Test lead kit adopted with standard diameter plug, suitable for universal measurement
- Color: Red with Black as shown in the picture
-
Uni-T UT201+ True RMS Digital Clamp Multimeter
Original price was: ₨8,000.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewUNI T UNI-T Digital Clamp Meter UT201+ AC DC Current Amperimetro Tester Clamp Multimeter Resistance Frequency Tester
UT201+
UT201+ 600V AC DC Voltage Measurement, 400A AC Current Measure, MAX/MIN/true RMS Function:AC/DC voltage, AC Current Measure,Diode Test,Resistance ,Continutity Buzzer,AC Frenquency, Backlight
-
UNI-T UT203+ Clamp Multimeter
Original price was: ₨11,500.00.₨9,599.00Current price is: ₨9,599.00. Quick ViewThe UNI-T digital clamp multimeter UT203 is a 3+ digits instrument with steady operation, fashionable structure and highly reliable measuring. The Meter uses a large scale of integrated circuit with double integrated A/D converter as its core, and contains a full range overload protection.
Besides the quality, the measurement devices distinguish by their ease of use, good legibility of the display and sophisticated measurement functions. UNI-T digital multimeters also fulfill the important details of everyday measuring, such as the almost immediate response of the continuity test, reliable measurement results, and conservative use of the battery. If you have ever worked with a digital multimeter from one of the various cheap manufacturers, you are familiar with problems such as continuity tests taking several seconds, noticeable deviation of measurement results if the battery is low, and rapid battery drain…
-
UNI-T UT204+ Digital 600A AC/DC Numeral Pincer Multimeter Ammeter Anti-Burning Anti-Misdetection Clamp Meter Multifunction Electrician Current Measurement with True Effective Value, NCV Intelligent
Original price was: ₨20,280.00.₨11,499.00Current price is: ₨11,499.00. Quick View- Power : 1.5V battery (R03) x 2 *no warranty*
- Display : 37mm x 25mm
- Product color : Red and grey
- Product net weight : 235g
- Product sizet: 215mm x 63mm x 36mm
- Standard accessoriest: Batteries, test leads, Thermocouple
- Standard individual packing : Gift box, Carrying bag, English manual
-
UNI-T UT33A+ Palm Size Multimeter
Original price was: ₨4,420.00.₨3,499.00Current price is: ₨3,499.00. Quick ViewSpecification
- Brand Name:UNI-T
- Model Number:UT33A
- DIY Supplies:Electrical
- Measuring Current Range:400mA/4mA/40mA/400mA/10A
- Operating Temperature:0 – 50
- Measuring Voltage Range:400mV/4V/40V/400V/500V
- Display Type:Digital Display
- Dimensions:13 x 7.5 x 2.5cm
- Measuring Capacitance Range:–
- Measuring Resistance Range:400/4k/40k/400k/4M/40MOhm
-
UNI-T UT33B Plus Palm Size Digital Multimeter
Original price was: ₨3,500.00.₨2,699.00Current price is: ₨2,699.00. Quick View- Pocket-sized design for easy portability and on-the-go measurements.
- Comprehensive measurement functions include voltage, current, resistance, diode testing, and continuity testing.
- Large LCD display with backlight for clear and easy-to-read measurements.
- Auto-ranging and manual ranging modes for flexible measurement options.
- Safety features include overload protection and fused current inputs.
- Battery saver function with auto power-off to extend battery life.
- User-friendly interface with clearly labeled functions and range selection buttons.
- Versatile applications in household, automotive, and electronic projects.
-
UNI-T UT33D+ Palm Size Digital Multimeter
Original price was: ₨3,000.00.₨2,699.00Current price is: ₨2,699.00. Quick ViewThe new generation UT33+ series redefines the performance standards for entry-level digital multimeters. Our innovative industrial design ensures that these products can withstand 2 meters drop. The new LCD display layout provides a better user experience. This series ensures that users can work safely in CAT II 600V environment. Special features are, 2mF capacitance test (UT33A+); battery test (UT33B+); temperature measurement function (UT33C+); UT33D + for the NCV non-contact with electricity, resistance range up to 200M entry-level digital multimeter; is the electrical priority of the digital multimeter.
-
UNI-T UT55 Digital multimeter
Original price was: ₨7,280.00.₨5,999.00Current price is: ₨5,999.00. Quick ViewMain Features:
- A strong case for protection, do not be afraid of dropping.
- Large display screen, suitable for your eyes.
- An insulated protector can effectively protect you during your manipulation.
- Powered by 1 x 9V 6F22 battery. (not included)
-
UNI-T UT658 USB Tester in Pakistan
Original price was: ₨1,900.00.₨1,499.00Current price is: ₨1,499.00. Quick View- Voltage Measurement Range: 3V – 9V
- Current Measurement Range: 0A – 3A
- Voltage Resolution: 0.01V
- Current Resolution: 0.001A
- Capacity Measurement Range: 0mAh – 19999mAh
- Energy Measurement Range: 0mWh – 99999mWh
- LCD Display: 1.44-inch color TFT screen
- USB Compatibility: USB 2.0, USB 3.0
- Overload Protection: Yes
- Operating Temperature: 0°C – 40°C
- Storage Temperature: -10°C – 60°C
- Dimensions: 61mm x 28mm x 14mm
- Weight: Approximately 20g
- Power Supply: Powered by the tested USB device (no external power source required)
-
Unity Digital Multimeter DT-830
Original price was: ₨750.00.₨649.00Current price is: ₨649.00. Quick ViewUnity Digital Multimeter DT-830 multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. This multimeter includes basic features such as the ability to measure voltage, current, and resistance. Digital multimeters display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. A multimeter can be a handheld device useful for basic fault finding and field service work, or a bench instrument which can measure to a very high degree of accuracy. They can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power supplies, and wiring systems.
-
Unleash Superior Sound with the High-Powered TDA8932 35W Digital Mono Amplifier Board Module
Original price was: ₨1,100.00.₨599.00Current price is: ₨599.00. Quick View- Operating Voltage: DC10-30V (recommended 24V)
- Output Power: 35W
- Speaker Impedance: 4-8 ohms (8 ohms best)
- Circuit Configuration: Mono BTL output
- Board Size: 45 x 31mm
-
UNO R3 WiFI Development Board ATmega328P
Original price was: ₨2,100.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Arduino UNO R3 board integrated with esp8266 module
- Program both UNO and esp8266 separately using dip switch
- UNO and esp8266 can communicate each other via serial by adjusting dip switch
- Supply Voltage: 6~9V recommend
- USB-converter: CH340G. Need to install driver software to program
- PinOut UNO: UNO R3
- Digital I/O Pins: 14
- Analog I/O Pins: 6
- Logic Level: 5V
- Operating temperature: −40С°/+125С°
- MCU: ATmega328
- WiFi MCU: ESP8266
- UNO+WiFi R3 ATmega328P+ESP8266 (4Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266
-
-
- USB connectors are made with silver flashed brass contacts.
- Ideal for making your own USB cables.
- Fit for electronics power port repair or DIY projects power supply port.
- Soldering is required.
-
USB Security Tester LCD Display
Original price was: ₨1,000.00.₨699.00Current price is: ₨699.00. Quick ViewUSB tester is a unique product which can be used to test the voltage and current levels of a system or a USB based circuit.
-
USB to RS485 / USB 2.0 to RS 485 Serial Converter Adapter
Original price was: ₨350.00.₨250.00Current price is: ₨250.00. Quick View- Support System: Windows XP , Vista, Windows 7 , Linux , MacOS , and WinCE5.0 drive
- Supports baud rate range : 75bps – 115200bps , up to 6Mbps
- Work temperature range: -40°C ~ +85°C
- Communication distance :1200m(max)
- Dimension:6.1×1.6×1.3cm
- Color: Black
-
1 Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA /Server 2008 / Win7 / Win8 32 Bit / 642. Support USB1.1 or USB2.0/USB3.0 for communication.3. Simulation interface, you can upgrade serial peripherals.4. Supports common MODE contact signal.5. Supports IRDA SIR infrared communication.6.information download here7. Provide RS232, RS485, RS422 interface.8. Programming does not affect the target board program runs
-
- 3.3V & 5.0V operations for DDWRT support on different voltage system
- Standard USB type A male and TTL 6pin connector.
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real-time
- Works with existing COM port PC applications. Ready for Windows 8/7/Vista/Server 2003/XP/2000/CE
- Plastic coating protection from standard wear and tear.
- Size: 52mm X 15.5mm x 6.5mm (L x W x H).
-
USB Type-B Connector Breakout Board
Original price was: ₨130.00.₨99.00Current price is: ₨99.00. Quick View- Effective this breakout board has a USB Type B female connector, with all 4 pins broken out to a DIP 2.54mm header.
- Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
- USB 2.0 Type B Female
- 2.54mm Pitch
- DIP4
- color: green
- Material: plastic
- size:20*20*1mm
- Package Contents:
- 2 * USB to DIP adapter board
- Only the above package content, other products are not included.
-
USBASP USBISP 3.3V-5V AVR Programmer in Pakistan
Original price was: ₨750.00.₨665.00Current price is: ₨665.00. Quick ViewUSBASP AVR Microcontroller Programmer is a USB in-circuit? for Atmel AVR controllers. It can use for programming Microcontrollers used in Famous Arduino Boards.
-
UT33C+ Palm Size Multimeter
Original price was: ₨3,600.00.₨2,999.00Current price is: ₨2,999.00. Quick ViewThe new generation UT33+ series redefines the performance standards for introductory digital multimeters. Our innovative industrial design makes sure that these products can withstand 2 meters drop. The new LCD display layout provides a better user experience. The UT33+ series safety standards have also been enhanced to ensure that users can work safely in CAT ll 600V environment.
-
UT683KIT Wire Tracker – Cable Tracer & Line Finder in Pakistan
Original price was: ₨21,500.00.₨14,499.00Current price is: ₨14,499.00. Quick ViewThe UT683KIT Wire Tracker in Pakistan is a professional Uni-T cable tracer and network line finder for RJ11 & RJ45. Ideal for electricians and IT technicians, it accurately traces cables, detects faults, and tests continuity with long-distance coverage. Durable, portable, and affordable—your best choice for network cable testing in Pakistan.
-
UT685B KIT TDR Cable Tester in Pakistan – Advanced Wire Tracker & POE Detector
Original price was: ₨45,000.00.₨29,999.00Current price is: ₨29,999.00. Quick ViewThe UT685B KIT TDR Cable Tester in Pakistan is a professional-grade Uni-T cable tester designed for accurate network cable testing, fault locating, and POE detection. With advanced TDR technology, it delivers cable length testing up to 500m with ±4% accuracy, making it one of the best cable testers in Pakistan for electricians, telecom engineers, and IT specialists.
-
ULN2004 Features
- Output current (single output): 500mA (MAX.)
- High sustaining voltage output: 50V (MIN.)
- Output clamp diodes
- Inputs compatible with various types of logic
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
Variable resistor 50K Potentiometer / Variable Resistor
Original price was: ₨50.00.₨39.00Current price is: ₨39.00. Quick ViewVariable resistor 50K Potentiometer / Variable Resistor (50K Ohm) is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
- Easily convert circuit diagrams into working ventures.
- Make a permanent basis for your breadboard templates.
- Built specifically for dealing with DIL or DIP ICs.
- The copper has been stripped from one entire strip.
- Complex circuits can be easily built with a simple strip configuration.
- Copper tracks are electrically disconnected from one another and can be sliced to interrupt current traffic.
- With basic scissors, cutting the SRBP base material to the appropriate size is a breeze.
-
Veroboard Normal Line 14.5×6.5cm Stripboard PCB
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick View- Stripboard Just like Veroboard
- Good quality product individually sealed to prevent tarnishing
- This item is of a superior quality to most other boards on offer and is guaranteed to be easier to solder
- This product is manufactured from copper clad laminated board
- This product is ideal for prototyping, educational products etc.
- The product is single-sided PCB prototype stripboard. Size is 65x145mm, pitch of 2.54mm, a pore size of 1.00mm.
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects. Stripboards to meet your demands when designing electronic experiments and DIY projects.
- High quality of durable glass fiber material with 1.3mm thickness makes a very solid and sturdy prototype circuit board, a tin plating process makes the welding component easier.
- The stripboards are easy to weld and can be cut to other sizes as desired.
-
Veroboard Vero Board Single Side Large Breadboard Style
Original price was: ₨300.00.₨199.00Current price is: ₨199.00. Quick ViewProject Board / Vero board / prototyping board Size = 14.5cm x 6.5cm
we can use for any electronics projects.
-
- Form A Switch,1 Watt max.
- 24v DC switching voltage max.
- 0.1A switching current max.
- 150v DC breakdown voltage min.
- 7/0.2mm PVC insulated cable
- 7/0.2mm PTFE insulated cable on Acetal switch
-
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
Voice Recognition Module
Original price was: ₨5,600.00.₨4,799.00Current price is: ₨4,799.00. Quick View- Voltage: 4.5-5.5V
- Current: <40mA
- Digital Interface: 5V TTL level for UART interface and GPIO
- Analog Interface: 3.5mm mono-channel microphone connector
and microphone pin interface - Size: 31mm x 50mm
- Recognition accuracy: 99% (under ideal environment)
-
W1209 LED Digital Thermostat Temperature Control
Original price was: ₨500.00.₨299.00Current price is: ₨299.00. Quick View- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
-
W1209WK (W2809) Temperature Controller
Original price was: ₨799.00.₨699.00Current price is: ₨699.00. Quick View- Its temperature measurement range is 50 degrees to -110 degrees Celcius.
- +/- 0.1 degree Celcius is its measurement accuracy.
- 0.1-degree celsius is its control accuracy.
- Its return difference accuracy is 0.1 degrees Celcius.
- Its high-temperature protection range is 0 to 110 degrees centigrade.
- Its input voltages are 12V DC.
- It has a 20A relay output.
- It is a waterproof sensor.
- Its measurement input is NTC (10K 0.5%).
- Its size is 48 x 29 x 22 mm.
- Its opening size is 46 x 26.5 mm.
-
W3001 Digital Temperature Controller AC220V OR DC12V 10A
Original price was: ₨1,000.00.₨599.00Current price is: ₨599.00. Quick View- 220V AC is its power value. OR 12V DC is its power value.
- 10A is its maximum current.
- The maximum power of this temperature controller is 500W.
- -50 degrees to 110 degrees centigrade is its temperature measurement range.
- -50 degrees to 110 degrees centigrade is Its control range temperature.
- This is the NTC10K temperature sensor.
- This temperature Controller’s Length is 1m long.
- This controller is also waterproof.
- The 4mm is the temperature sensor sample size.
- The size of the device is 60 x 45 x 32 mm.
- weight of the digital temperature controller is 53g.
- It is made of metal.
-
W3230 Temperature Controller
Original price was: ₨1,690.00.₨999.00Current price is: ₨999.00. Quick View- Overall dimensions: 79X43X26mm (hole size 74X39mm)
- Temperature measurement and programming range: -50 ° С … 120 ° С
- Measurement accuracy: 0.1 ° С in the range from -9.9 ° С to 99.9 ° С; or 1.0 ° C outside this range
- Control accuracy: 0.1 ° С 0.1 ° С in the range from -9.9 ° С to 99.9 ° С; or 1.0 ° C outside this range
- Reading update time: 0.5 seconds
- Supply voltage V: 110-220 V AC
- Sensor: NTC 10K 0.5% cable length 0.8 m waterproof
- Maximum load current: 10A / 250VAC; 20A / 12VDC
- Ambient temperature for the controller: +10 … + 60 ° С
- Ambient humidity: 20 – 85>#/p###
- Consumption current: 30 mA
- Current consumption during relay operation: 65 mA
- For indoor use.
- Load connection method: electromagnetic single-channel relay (10A / 220VAC) (for heavy loads use a contactor or solid-state relay of a higher power).
-
W5100 Ethernet Shield
Original price was: ₨3,500.00.₨2,999.00Current price is: ₨2,999.00. Quick View- Operating voltage 5V (supplied from the Arduino Board)
- Ethernet Controller: W5100 with internal 16K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
- The Shield contains a number of informational LEDs
- PWR: indicates that the board and shield are powered
- LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
- FULLD: indicates that the network connection is full duplex
- 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
- RX: flashes when the shield receives data
- TX: flashes when the shield sends data
- TX: flashes when the shield sends data
- COLL: flashes when network collisions are detected
-
W5500 Ethernet Network Module / Shield
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. Quick View- Operating voltage: 2.97-3.63V
- Current draw: Typical: 128mA, Max: 200mA
- SPI clock frequency: Max: 80MHz
- Ethernet MAC: 10/100BASE-T
- PHY: 10BASE-T and 100BASE-T
- TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
- Hardware sockets: 8
- Internal buffer: 32KB
- Supports: SPI, WOL, and power down mode
-
Water Level Sensor in Pakistan
Original price was: ₨250.00.₨109.00Current price is: ₨109.00. Quick View-
Operating voltage: DC3-5V
-
Operating current: less than 20mA
-
Sensor Type: Analog
-
Detection Area: 40mmx16mm
-
Production process: FR4 double-sided HASL
-
Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
-
Dimensions: 60mmx20mm
-
-
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
-
WELLOO Wire Stripping 7inch WSP0701
Original price was: ₨1,150.00.₨799.00Current price is: ₨799.00. Quick View- Product Name: Wire Stripper
- Size: 7 inches
- Brand Name: Welloo
- Color: Yellow
- Item Code: WSP0701
- Usage: Wire Cutting
-
- Its color is White.
- Alarms diameter is 29mm / 1.14”
- Electronic buzzer height is 15mm / 0.59”
- It has 2 mounting holes. And the distance of the holes is 40mm / 1.57”
- Its rated voltages are 12Volts.
- Its operating voltages are 3 to 24 voltages.
- Its rated current is 20mA.
- Its min sound output at 10cm is 95 Db.
- Its resonant frequency is 3100 to +- 500.
- Its operating temperature is -20 to -80 degrees centigrade.
- It has intermittent sound and mounting holes.
- It has good storage and it allows you to use it for a long time.
-
Features:
1. 12pcs LED, IR distance 10M. Lens 3.6 mm wireless security camera with memory card2. Support ONVIF 2.0, RTSP protocol3. WPS one key setup WiFi, acoustic wave wifi setting4. 720P,VGA,QVGA triple stream(NOTE:it just support 640*480 in firefox,goole chorome.It will be 1280*720P in IE BROWSER.)5. Two-way audio(Note:Audio is not good), Remote Pan/Tilt rotate6. Wi-Fi/802.11/b/g/n,support dynamic IP7. Motion detection, email alert, FTP upload8. Iphone, 3G phone, IOS and android Smartphone supported(don’t support windows APP)9. Multi-language, Firefox, Safari, Google browser10. Pan:270 degree, Tilt: 80degree, auto cruise11. Support 64GB TF Card -
Wire Monkey Cutter Stainless Steel Wire Cutter Monkey Plier
Original price was: ₨600.00.₨439.00Current price is: ₨439.00. Quick View- Special flip over handle design allows tool to be used for slicing cable sleeve
- Drop forged chrome/nickel alloy is fine polish for corrosion resistant finish
- Precise machined joint for ease of use and longer life
- For cutting cables only
-
Wireless Mini Keyboard 2.4GHz with Touchpad & Mouse
Original price was: ₨2,600.00.₨1,999.00Current price is: ₨1,999.00. Quick ViewMini 2.4 GHz Wireless Keyboard with Touchpad for Raspberry Pi Specifications and details
- Color: Black.
- LED colors Blue, Red, Green
- Operating range Up to 32ft
- Power transmission p + 5db Max.
- Operating voltage 3.3 V.
- Operating current <50 mA.
- Load current <300 mA.
- Sleep current <1 mA.
- Windows 2000 / XP / Vista / CE / Win7 / Win8 / Win10 / Linux system requirement
- Dimensions: 5.71 x 3.94 x 0.39 inches.
-
XBee 1mW Wire Antenna
Original price was: ₨6,500.00.₨4,549.00Current price is: ₨4,549.00. Quick ViewINTRODUCTION
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek! -
XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
Original price was: ₨6,000.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewThis is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way. -
XBee 2mW Wire Antenna – Series 2 (ZB)
Original price was: ₨15,000.00.₨8,799.00Current price is: ₨8,799.00. Quick ViewThis is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
-
XBee Pro 60mW PCB Antenna – Series 1
Original price was: ₨7,500.00.₨5,999.00Current price is: ₨5,999.00. Quick ViewThis is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
-
INTRODUCTION
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. -
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
-
This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
-
XH-A233 DC 12V-24V Wireless Bluetooth Receiver
Original price was: ₨1,200.00.₨949.00Current price is: ₨949.00. Quick View- Product model: XH-A233
- Audio input: TF card / Bluetooth
- Audio output: 2-channel 2*15W
- Input voltage: DC12-24V
- Bluetooth signal distance: 0-15m
- Operating Temperature:-20~85
- Operating Humidity:5%~95%RH
- Module Size:35*35*7.2mm
-
XH-M452 Digital Temperature Humidity Controller DC 12v
Original price was: ₨3,500.00.₨1,149.00Current price is: ₨1,149.00. Quick View- Supports heating mode and cooling mode.
- High precision 0.1 Celsius and 0.1% RH.
- Real-time display of temperature and humidity.
- Custom load, arbitrarily selected.
- Simple setting.
- Easy installation.
- Power-down memory function.
- Model: XH-M452
- Input voltage: DC 12V
- Temperature range: -20~60 Celsius
- Humidity range: 00%-100% RH
- Detection accuracy: 0.1 Celsius 0.1% RH
- Detection accuracy: 0.1 Celsius
- Sensor: 1 Meter Temperature and humidity sensor
- Output Type: Relay Output (Switch Output)
- Size: 65x55x28mm
-
XH-M564 TPA3116D2 DC 12V-24V 2x50W Dual Channel Mini Digital Amplifier D Class 50W+50W
Original price was: ₨990.00.₨699.00Current price is: ₨699.00. Quick View- XH-M564 TPA3116D2 DC 12V-24V 2x50W Dual Channel Mini Digital Amplifier D Class 50W+50W is a small circuit board or module that incorporates the TPA3116D2 digital audio amplifier chip.
- This module is designed to be used as a component in larger audio systems, rather than as a standalone amplifier.
- The module is capable of accepting a DC power input in the range of 12V to 24V, and can produce up to 50 watts of power per channel, for a total of 100 watts.
- It has two channels, which means it can power two separate speakers or audio outputs at the same time.
- The amplifier uses a Class D design, which is known for its efficiency and ability to produce high-quality audio with minimal power consumption.
- This makes it ideal for use in portable audio systems, where battery life is a concern.
- The TPA3116D2 DC 12V-24V 2x50W Dual Channel Mini Digital Amplifier D Class 50W+50W Module is a popular choice for DIY audio enthusiasts who want to build their own audio systems.
-
XH-M602 Battery Charge Control Module DC 6-60V Lithium Battery Charging Control Switch Protection Board
Original price was: ₨1,950.00.₨1,399.00Current price is: ₨1,399.00. Quick View- Input voltage: AC 220V
- Display precision: 0.1v
- Control precision: 0.1v
- Output type: output switch
- Voltage error: +0.1v/-0.1v
- Application Field: 3.7v~120v lithium or storage battery
- Weight: 110g
- Size: 86*58*24mm
-
Xh-m603 Battery Charging Control Module Dc 12v-24v Voltage Charging Discharge Monitor Relay Switch Battery Protection Board
Original price was: ₨1,150.00.₨849.00Current price is: ₨849.00. Quick View- Automatic Charging: Starts and stops charging automatically.
- Accurate Voltage Monitoring: Keeps track of your battery’s voltage.
- Versatile Battery Support: Works with many different battery types.
- Safe and Reliable: Protects your battery from overcharging, over discharging, and short circuits.
- Easy to Set: Adjust the charging settings to fit your needs.
- Compact Size: Small and easy to use.
-
Xh-m604 Battery Charger Control Module Dc 6-60v Storage Lithium Battery Charging Control Switch Protection Board In Pakistan
Original price was: ₨1,500.00.₨949.00Current price is: ₨949.00. Quick View- Input Voltage:DC 6-60V
- Display Accuracy:0.1V
- Control Accuracy:0.1V
- Output Type:direct output
- Voltage Tolerance:±0.1V
- Apply For:6-60V MAX 80V battery
- Dimension:81*54*18mm
-
XH-W3002 12V OR 220V Temperature Controller
Original price was: ₨1,100.00.₨699.00Current price is: ₨699.00. Quick View- Item Type: W3002 temperature controller Thermostat
- Model: XH-W3002
- Output Type: Direct Output
- Output capacity: 10A max
- Power supply: DC12V or AC220V
- Load power: 120/240/1500 W
- Temperature Measurement Range:-50° C ~110° C Temperature
- Control:-50° C ~110° C
- Temperature Control Precision: 0.1° C
-
XH-W3005 Digital Humidity Controller
Original price was: ₨2,590.00.₨1,499.00Current price is: ₨1,499.00. Quick View- Product Name: Microcomputer Humidity Control Instrument
- Product model: XH-W3005
- Supply voltage: 220v or 12v
- Control range: 0%-99%RH
- Control accuracy: 0.1% RH
- Measurement accuracy: +-2%RH
- Load power: 1500W
- Output type: direct output
- Sensor: chip type
- Appearance size: 60 x 45 x 31mm
-
xl6009 4A DC/DC Step-Up Boost Converter
Original price was: ₨350.00.₨239.00Current price is: ₨239.00. Quick View- Input voltage: 3 – 32V
- Output voltage: 5 – 35V (adjustable)
- Output current: Maximum output current 4A
- Note: The higher the voltage, the load current increases.
- Efficiency of this regulator upto <94%
- Load regulation: 0.5%
- Voltage regulation: 0.5%
- Adjustable potentiometer onboard for output voltage adjustment.
- Non – isolated constant voltage module.
- Non – synchronous rectification.
- Short circuit proportion: current limiting since the recovery.
- Dimension: 45*20*14 mm (L*W*H)
-
XL6009 LM2596S Auto DC-DC Step Up Down Automatic Boost Buck Voltage Power Converter Solar panel Module
Original price was: ₨1,099.00.₨850.00Current price is: ₨850.00. Quick View- Input: 3.5-28V.
- Output: 1.25V-26V.
- Output voltage independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
- Maximum input current 3A.
- Maximum output 3A.
- Rated input 1A, Output 1A.
- Size:5.2cm x 3.8cm x 2cm
Package Included:
1xXL6009 LM2596S DC-DC Step Up Down Boost Buck Voltage Power Converter Module
-
XM18 Incubator Controller Thermostat Full Automatic
Original price was: ₨7,000.00.₨5,199.00Current price is: ₨5,199.00. Quick ViewXM18 Automatic Thermostat Incubator Egg Incubator Controller Multifunctional Automatic Incubator Industrial Incubators Temperature Probe for Breeding Chicken Duck Adopt the latest microelectronics technology and new components strong anti-interference ability, high work stability and high precisionHumanized four-screen display design, convenient to use Adopt the latest microelectronics technology and new components strong anti-interference ability, high work stability and high precisionHumanized four-screen display design, convenient to use XM18 Automatic Thermostat Incubator Micro-electronic technology and new electric parts. Digital displaying of temperature, humidity, and turning frequency































































































































































