-
-23%
5V 1604 LCD 16×4 Character LCD Screen
Original price was: ₨1,040.00.₨831.00Current price is: ₨831.00. Quick View16X4 CHARACTER LCD 1604 Blue LCD DISPLAY is a dot-matrix liquid crystal display module specially used for displaying letters, numbers, symbols, etc. 16?4 LCD Display can display 4 lines with 16 characters in each line. Divided into 4-bit and 8-bit data transmission methods. 1604 Blue Character LCD provides rich command settings: clear display; cursor return to origin; display on/o; cursor on/o; display character ashes; cursor shift; display shift, etc.
-
-36%
5v 2A Adapter Power Adapter 5V 2000mA
Original price was: ₨624.00.₨415.00Current price is: ₨415.00. Quick ViewPower adapter output rating is 5 volts and 2000 mili amperes.
Input
100-240V AC 50/60HzOutput
DC 5V 2A(max)Power
10WattCable Cord Length
6.5Ft (2m)Color
Black -
-32%
5V 2A Power Supply AC/DC Adapter
Original price was: ₨510.00.₨363.00Current price is: ₨363.00. Quick View- Simple to use, just plug in, charge up and play.
- Short circuit, over-voltage and over-current protection.
- Incredibly low fault rates this power supply is a regulated center positive power supply.
- High-quality graded AC to DC power adapter.
- Light in weight and with heavy-duty cable-wire.
- Compatible with Dth, STB, CCTV, toys, broadband, laptop, DVD, tablet, TV tuner card, cordless phones, LCD monitor, scanners, cell phones, printers
-
-16%
5V 4A Power Supply Adapter 5V 4000mA
Original price was: ₨1,014.00.₨883.00Current price is: ₨883.00. Quick ViewNeed a great deal of 5V power? This exchanging supply gives a tidy controlled 5V yield at up to 4 Amps (4000mA). 110 or 240 information, so it works in any country. The attachments are “US 2-prong” style so you may require a fitting connector.
This cable ends with a ‘standard’ 5.5mm OD, 2.1mm ID positive tip connector and with match with our 2.1mm electrical string, female terminal square connector, breadboard-accommodating DC jack, and so forth
This connector is incredible for use with RGB LED Matrices, NeoPixels, RGB LED pixels or addressable LED strip, and so on Its not useful for controlling an Arduino through the DC jack as it needs at any rate 7.5V – look at our 9V connector
-
-27%
5V 6A 6000mAh Adapter With Power Cord
Original price was: ₨1,300.00.₨987.00Current price is: ₨987.00. Quick View- Input: 100 – 240V AC 50/60Hz
- Output: DC 5V 6A
- Max Wattage: 30W
- DC Jack Converter: 5.5 x 2.5mm (Compatible with 5.5×2.1mm DC Port)
- DC Cable Length: about 110cm
- AC Power Cord: about 110cm with US Plug
- Pole of DC Plug: Center Positive(+), Outside Negative (-)
- Condition: Brand New 100%
-
-15%
5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
Original price was: ₨936.00.₨831.00Current price is: ₨831.00. Quick View- Imported high-quality double-sided compact PCB.
- Opto-isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
-
-39%
Power Relay with a coil rated voltage of 5V and SPDT (single-pole, double-throw) contacts. The relay have 5 pins, with good quality and long operational life.
-
-42%
5V USB Fast Charging Module
Original price was: ₨624.00.₨373.00Current price is: ₨373.00. Quick View- Operating Voltage: 12 ~ 24VDC
- Supported Fast Charging Protocol: Huawei fast charge protocol FCP with SCP, Samsung fast charge protocol AFC, Spreadtrum Quick Charge Agreement SFCP
- Output Power: 36 Watt
- Output voltage wired compensation
- Conversion efficiency: 90%~97%
- Supports multiple fast-charging protocols
- Input overvoltage, overcurrent, Undervoltage protection
- Output overcurrent, short circuit protection
- Module over-temperature protection
-
-20%
5X Magnification Magnifying Glass with Illuminant
Original price was: ₨312.00.₨259.00Current price is: ₨259.00. Quick View- The LED have long life (more than ten year)
- It’s easy to use and can be used as a torch at nignt
- It deeps wording for more than 100 hours with only double batteries (CR2016) placed in it or one (CR2032)
- Advertisements can be printed on the two sides
- The special white light makes it possible for the object to show it’s orginal color
-
- Cable Zip Ties Contains: Tie wraps 6 INCH
- Pure new PA66 nylon material, cable tie is made of approved UL66 nylon new High tensile strength and A high degree of flexibility does not break easily material, safe and environmentally friendly.
- length: 6Inch, Max tensile strength: 40 LBS tensile strength is determined by width and thickness. Our ties are widest, compared to most ties on the market Durable Nylon Ties and heat resistance of the heavy-duty cable tie tape package, which can ensure that they are exposed to high temperature for a long time, suitable for indoor and outdoor use, safe self-locking buckle can be easily locked in place, cable tie tape conforms to RoHS standard/UL certification UL 94 V2.Same size, but suitable
- In daily life, multi-purpose cable zip ties are so powerful that you can tie them together to wrap materials, repair plant branches, and repair garden fences. In offices and studios, they can be used to organize wires, hang LED lights and banners. You can even do some DIY ideas: make butterflies or fish for children; Show off your stylish tie wraps design.
-
6 MHz Crystal Oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-38%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-30%
6 Pin Crimp Shell Wire | Straight Connector pair
Original price was: ₨99.00.₨72.00Current price is: ₨72.00. Quick ViewThis is a simple six wire cable. Great for jumping from board to board or just about anything else.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Inductor is a passive two-terminal component that temporarily stores energy in the form of a magnetic field. It is usually called as a coil. The main property of an inductor is that it opposes any change in current.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-26%
- Case: R-6
- Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C
- Terminals: Finish Tin. Axial Leads, Solderable per MILSTD-202, Method 208
- Polarity: Color Band Indicates Cathode
- Approximate Weight: 2.1 grams
-
-22%
his 6DOF Biped robot is a professional small humanoid robot consist of full aluminium parts, special non-ferrous oxidation process on surface, smooth edges not hurting hands, the metal is unbleached, beautiful and durable, prevent decoloring for long time using.
The robot you can mount six micro servos, each foot is 3DOF, the robot can both walk forward or backward and crouch, stand up, turn, even can do a lot of forward roll and backward roll.The kit includes six TowerPro MG995 servos.
-
Out Of StockThis Robot is made of 18 SG90 Servo Motors
To make this robot move, we just need the control software and the following components:
1.6 Legs 18 DOF Robot Black Spider Robot 18pcs SG90 Servo Motor
2.32 Channels Servo Motor Controller Robot Contorller Servo Driver
3.7.4V power supply -
-37%
6pcs 20mm Mist Maker Fogger Ceramics Discs
Original price was: ₨1,196.00.₨779.00Current price is: ₨779.00. Quick View- Frequency: 1.70MHz with High Output Atomization amount.
- Ceramic disc diameter is 20mm (not include rubber)
- High temperature calcined ceramic , Anti-aging, anti-corrosion, durable.
- Easy to change and install, mainly used in the household humidifier.
- Package includes: 6x 20mm Ceramics Discs ,1x Replacement Key
-
-44%
6S 22.2V 12A BMS for 18650 Li-ion Batteries | Protection Board for 6-Cell Lithium Packs
Original price was: ₨718.00.₨415.00Current price is: ₨415.00. Quick View- Number of Cells: 6
- Voltage: 22.2V
- Current: 12A
- Overcharge Voltage: 4.25-4.35V
- Over-Discharge Voltage: 2.5V
- Working Temperature: -40°C to +50°C
- Size: 53.5343.0mm
-
-15%
6V 4.5AH Sealed Lead Acid Battery
Original price was: ₨1,404.00.₨1,247.00Current price is: ₨1,247.00. Quick View- Size – 70mm x 47mm x 97mm tall
- 6v 4.5ah 20hr
- Sealed Battery
- Rechargeable
- Suits many 6v kids ride-ons.
- 6.5mm connectors.
-
-33%
Out Of Stock6V DC Micro Gear Motor 56 RPM Gearhead Motor
Original price was: ₨624.00.₨437.00Current price is: ₨437.00. Quick ViewSpecifications:
Model: GM12-N20
Material: Alloy Gear
Rated Voltage: DC 6.0V
No Load
Speed: 56RPM
Current: 50mA
With Maximum Efficiency
Speed: 40RPM
Current: 150mA .
Torque: 73.5 mN.m (26.46 oz)
Stall
Torque: 6.6 lbs.cm
Current: 0.6A
Size: 0.394 x 0.433 x 1.378 in.
-
-48%
7 Cell Power Bank Case
Original price was: ₨1,924.00.₨1,039.00Current price is: ₨1,039.00. Quick View- Output voltage: 5V 2.1A
- Color: blue green black
- Power display: LED digital tube display, non-working state intelligent automatic shutdown
- Charger input: Type-C fast charge mobile phone special charging port
- We will give away a Type-C charger cable
- It needs a flat 18650 (unprotect) 65mm long, diameter less than 18.2mm
- Can not use the tip 18650 battery,
- If using the old battery, please test the voltage
- More than 3.5V and an internal resistance of less than 80, can not use the flashlight 18650 battery
- Size: 156*78*22mm
-
-27%
7 in 1 Soil Integrated Sensor EC PH NPK Moisture Temperature Meter
Original price was: ₨39,520.00.₨30,159.00Current price is: ₨30,159.00. Quick View- High precision agriculture sensors, rapid response, good exchange ability
- Good tightness, corrosion resistance, the soil tester can be used in the soil for a long time.
- Flame retardant epoxy resin curing, completely waterproof, the soil tester can withstand strong external impact.
- Steel needles are made of high quality materials that can with stand long-term electrolysis , acid and alkali corrosion in soil.
-
Buy low price, high quality wire cutter.
-
- Reverse Voltage(Vr): 5 V
- Reverse Leakage Current (Ir): 50A
- Forward Current (If): 25mA
- Peak Forward Current (Ifp): 100 mA
- Power Dissipation (P): 100 mW per Segment
- Operating Temperature (Topr): -40C to +80C
- Storage Temperature (Ttsg): -40C to +85C
- Lead Soldering Temperature: 260C
- Height: 70mm
- Width: 48mm
-
- A seven-segment LED display
- Common cathode configuration
- Right-hand decimal point
- Long lifetime operation
- IC Compatible
- Low power dissipation
-
- Product Name: LED Digital Display Tube
- Type: Common Cathode
- Model: 50AH
- Common Cathode : 3-8
- Digital Display: 1 Digit
- Digital Number: 1 Bit Segment
- Emitted Color: Red
- Pin Number: 10
- Continuous Forward Current: 20mA
- Average Forward Voltage: 2V
- Power Consumption : 3mW
- Luminous Intensity: mcd
- Number Height : 0.5 inch
- Panel Size : 19 x 12. x 8mm / 0.5 x 0.5 x 0.31 inch (L*W*H)
- Total Size : 19 x 12. x mm / 0.5 x 0.5 x 0.55 inch (L*W*H)
- Material : Plastic, Metal
- Color : Black, White
-
-22%
Out Of Stock7.4V 800mAh Li-Ion Battery
Original price was: ₨3,328.00.₨2,703.00Current price is: ₨2,703.00. Quick ViewThis is the lowest cost of Lithium Polymer (LiPo) rechargeable battery that we have ever carried, so that it is affordable for students to use in their projects instead of using the disposable 9V battery that cannot be recharged. It is suitable for low power consumption usage such as circuit board, sensors and micro size DC motors.
-
-21%
- HEX Inverter
- Logic Gate IC
- Not Gate | Inverter
- 7404
- SN74HC04N same as SN74LS04N
- IC 04 IC04
-
The 7408 is a QUAD 2-Input AND gates and contains four independent gates each of which performs the logic AND function. It comes in 14-pin DIP package. 7408 AND Gate IC 74HC244 74244 Octal Buffers & Line Driver IC in Pakistan
-
The 74LS139 is a high speed Dual 1-of-4 Decoder/De-multiplexer. The device has two independent decoders, each accepting two inputs and providing four mutually exclusive active LOW Outputs. Each decoder has an active LOW Enable input which can be used as a data input for a 4-output demultiplexer. Each half of the LS139 can be used as a function generator providing all four minterms of two variables. The LS139 is fabricated with the Schottky barrier diode process for high speed and is completely compatible with all Motorola TTL families.
-
The SN74HC244N is an Octal Buffer and Line Driver IC, designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. This device organized as two 4-bit buffers/drivers with separate output-enable (OE)/inputs. When OE/ is low, the device passes non-inverted data from the A inputs to the Y outputs. When OE/ is high, the outputs are in the high-impedance state.
-
The 74LS373 consists of eight latches with 3-state outputs for bus organized system applications. The flip-flops appear transparent to the data.
-
-21%
A flip flop is a device that is able to store single bit of data. It is either one or zero, off or on in this case. It is able to store data over a prolonged period of time. There are many applications of 74HC374 Flip Flop IC.
-
74HC540 is a 20 Pin Octal 3-state Inverting Buffer IC having 2V to 6V Operating Voltage range with 6mA output current. The 3-STATE buffers utilize advanced silicon-gate CMOS technology. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances.
-
-12%
This Tri-state bi-directional transceiver utilize advanced silicon-gate CMOS technology and is intended for two-way asynchronous communication between data buses. They have high drive current outputs which enable high speed operation even when driving large bus capacitances. The circuit possess the low power consumption of CMOS circuitry, yet have speeds comparable to low power Schottky TTL circuits.
-
-19%
This device contains four independent gates each of which performs the logic exclusive-OR function.
-
Features
- High Speed Operation: tpd (CLK to Y) = 20 ns typ (CL = 50 pF)
- High Output Current: Fanout of 10 LSTTL Loads
- Wide Operating Voltage: VCC = 2 V to 6 V
- Low Input Current: 1 µA max
- Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
-
-33%
74HC164 8-Bit Parallel-Out Shift Register
Original price was: ₨104.00.₨73.00Current price is: ₨73.00. Quick ViewFeatures/Specs:
Wide Supply Voltage Range from 2.0V to 6.0V
Sinks or Sources 4mA at VCC = 4.5V
CMOS Low Power Consumption
Schmitt Trigger Action at all Inputs
ESD Protection Exceeds JESD 22v 200-V Machine Model (A115)
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Range of Package Options SO-14 and TSSOP-14
Totally Lead-Free & Fully RoHS Compliant
Halogen and Antimony Free. Green Device
-
- High Speed Binary Ripple Carry Counter
- Separate Reset Input Pin
- Wide Operating Voltage Range: 2.0 to 6.0 V
- Output Drive up to 10 LS-TTL Loads
- Equivalent to CD4060
-
-47%
Out Of Stock74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board
Original price was: ₨541.00.₨301.00Current price is: ₨301.00. Quick View-
16-channel analog/digital multiplexer/demultiplexer
-
Routes one signal to/from any of 16 I/O pins
-
Supports both analog and digital signals (bidirectional)
-
Operates over a wide voltage range:
-
HC: 2V to 6V
-
HCT: 4.5V to 5.5V (TTL compatible)
-
-
Low ON-resistance (~60–70Ω depending on voltage)
-
Fast switching speed (typical ~6ns)
-
Break-before-make switching to prevent shorting
-
Minimal leakage current (±0.8 µA typical)
-
Very low standby power consumption (~8 µA typical)
-
Built-in Enable pin (active LOW) for full shutdown
-
Channel selection via 4 digital address pins (S0–S3)
-
Works reliably in wide temperature range (–55°C to +125°C)
-
Compatible with microcontrollers like Arduino, ESP32, and Raspberry Pi
-
Ideal for expanding ADC input, signal routing, or sensor switching in compact circuits
-
-
- Input levels: CMOS level
- 16-line demultiplexing capability
- Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs
- Complies with JEDEC standard no. 7 A
- ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200V
- Multiple package options
- Specified from -40C to +85C and -40C to +125C
-
-35%
74HC595 74HC595D Shift Register
Original price was: ₨62.00.₨42.00Current price is: ₨42.00. Quick View74HC595 8-BIT SERIAL-IN SERIAL OR PARALLEL-OUT SHIFT REGISTER contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.
-
This is a monostable multivibrator or pulse generator.
-
-46%
74LS158 is a high speed Quad 2-input Multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs.
-
- Dual Input IC with 4 OR Gates with an operating voltage range from 3V to 18V
- Fully Static and Medium Speed Operation: with tPHL, tPLH = 60ns (typ) at 10V
- DC input current: 10mA
- High-Voltage Type (20V Rating)
- Power Dissipation: 500mW
- Maximum propagation delay is 250ns.
- Standard symmetric output
- Minimum logic Low and High voltage @+5V is1.5V and 3.5V
- Maximum Transition Time is 200ns
-
-31%
74LS47 IC – Common Anode LED Driver
Original price was: ₨94.00.₨68.00Current price is: ₨68.00. Quick View74LS47 is a BCD to 7-segment decoder/driver IC. It accepts a binary coded decimal as input and converts it into a pattern to drive a seven-segment for displaying digits 0 to 9.
-
-13%
- Model: RS-775 DATASHEET
- Voltage: 12v-24v universal
- Selectable voltage / speed (no load /per minute)
- 12V: 3000 4500 6500 10000
- 24V: 6000 9000 13000 20000
- Shaft length: 50mm
- Shaft diameter: 5mm
- Voltage: 12-24V DC
- Speed: 3000-20000 rpm
- No-load current: 1.7A (starting current 5A)
- Rated current : 2A
- Weight: 0.35KG
- Dimensions: outer diameter 44mm, length 66.5mm
-
-31%
75W Ceramic Heater Heat Emitter Lamp Incubator
Original price was: ₨727.00.₨519.00Current price is: ₨519.00. Quick ViewThis 75w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
-
The voltage regulator IC maintains the output voltage at a constant value. 7805 provides +5V regulated power supply. Input voltage range 7V- 35V Current rating Ic = 1A Output voltage range VMax=5.2V ,VMin=4.8V.
-
-17%
- Input Voltage range: 8V to 25V
- Output Voltage: 5.75V(min) – 6.25V(max)
- Output Current: 1A
- Peak current: 2.2A
- Operating Temperature : 0 to +125 C
- Polarity: Positive
-
-17%
- 9V Positive Voltage Regulator
- Minimum Input Voltage is 11V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- PSRR / Ripple Rejection: 55 dB
- Output Type: Fixed
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-17%
7812 is a 12V Voltage Regulator that restricts the voltage output to 12V and draws 12V regulated power supply. The 7812 is the most common, as its regulated 12-volt supply provides a convenient power source for most TTL components. Output Voltage:12V. Output Current:1A. Input Voltage: 14.6 – 35VDC.
-
- 15V Positive Voltage Regulator
- Minimum Input Voltage is 17V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-17%
- Output voltage tolerances of ±2% at Tj = 25˚C and ±4% over the temperature range (LM340A)
- Line regulation of 0.01% of VOUT/V of ∆VIN at 1A load (LM340A)
- Load regulation of 0.3% of VOUT/A (LM340A)
- Internal thermal overload protection
- Internal short-circuit current limit
- Output transistor safe area protection
- P+ Product Enhancement tested
-
-17%
- 24V Positive Voltage Regulator
- Minimum Input Voltage is 33V
- Maximum Input Voltage is 40V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protections are available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-17%
- 5V Negative Voltage Regulator
- Output Voltage: -5V
- Output Current: 1.5A
- Minimum Input Voltage is 7V
- Maximum Input Voltage is 25V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 and KTE package
-
-17%
- 12V Negative Voltage Regulator
- Minimum Input Voltage is -14.5V
- Maximum Input Voltage is -27V
- Peak Output Current is 2.2A
- Average Output Current is upto 1A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Available in TO-220 package only.
-
-9%
Out Of Stock7th gen Electric vehicle throttle electric motorcy
Original price was: ₨2,080.00.₨1,975.00Current price is: ₨1,975.00. Quick View -
-23%Out Of Stock
8 inch 7 segment display 8 inch seven segment led display
Original price was: ₨84.00.₨68.00Current price is: ₨68.00. Quick View- 8 inch 7 segment Display side pin
- Common anode 7 segment display
- Common cathode 7 segment display
- I.C. compatible
- Low Power Consumption
- High Brightness
- RoHS compliant
- Excellent Color and product Uniformity
- Excellent aesthetic look and Character Appearance
- Easy Mounting on PCB or Sockets
- Low Current Operation
- Excellent digit appearance
- Wide viewing angle
-
-38%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
-28%
8 Pin Crimp Shell Wire | Straight Connector pair
Original price was: ₨109.00.₨82.00Current price is: ₨82.00. Quick ViewThis is a simple eight wire cable. Great for jumping from board to board or just about anything else.
-
-28%
SIP Resistor Arrays (Single Inline Package) is an efficient way to pack several of the same value resistors into a convenient 0.1 spaced package. Available in different resistance values and number of pins. Pin 1 is identified with a dot above the pin also known as Resistor Networks.
-
-23%
8 Position Dip Switch provides eight independent ON/OFF slide switches in a small package. DIP switch versions are available in a broad range of low-profile, half-pitch (.05 inch), standard-pitch (.1 inch), through-hole, and surface mount options. Our unique design and construction allow for superior Electrostatic Discharge (ESD) protection.
We offer top, right angle, or side actuation styles; select styles are available with a choice of gold-plated or economical tin-plated contacts. Custom marking is also available. Our DIP switch product line includes SPST, SPDT, DPST, and 3PST circuit switching options. Optional bottom epoxy seals and removable top tape seals on the side of the actuator protect the switches during soldering and board washing.
-
Out Of Stock12v charging aluminium framed monocrystalline waterproof solar panel with an output of 8 Watts, ideal for use with caravans, boats, cars etc, supplied diode protected with approx 5 metres of barely ended cabling, these weigh approx 1.1kg and their dimensions are 300mm x 300mm x18mm, suitable for all 12v charging requirements.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-19%
8″ Tie Cable Tie Clip 8 inch – WHITE
Original price was: ₨270.00.₨229.00Current price is: ₨229.00. Quick View- Length: 8 inches
- Purpose: Multipurpose (basically tie two things together)
- Light, Safe &Unbreakable.
- Slip Proof Lock.
- Simply to insert Due to Bent Tail.
- Inside Serration For a Strong Hold onto Bundles.
- Easy Application Either Manually or With a Processing Tool.
- These Cable Ties Are Used For Routing, Bundling & Securing of Cables, Pipes, and Hoses As Well As For Car Wheel Cup.
-
- Light, Safe & Unbreakable.
- Slip Proof Lock.
- Simply to insert Due to Bent Tail.
- Inside Serration For a Strong Hold onto Bundles.
- Easy Application Either Manually or With a Processing Tool.
- These Cable Ties Are Used For Routing, Bundling & Securing of Cables, Pipes and Hoses As Well As For Car Wheel Cup.
-
-40%
80 Egg Rolling Tray (220VAC)
Original price was: ₨3,640.00.₨2,287.00Current price is: ₨2,287.00. Quick View- Egg Capacity: 70-80 eggs (may vary depending on egg size and arrangement)
- Temperature Control:
- Temperature Range: 20°C to 40°C (68°F to 104°F)
- Temperature Accuracy: ±0.1°C
- Humidity Control:
- Humidity Range: 40% to 70%
- Humidity Accuracy: ±5%
- Turning Interval:
- Adjustable Turning Interval: 0.1 to 99.9 hours
- Rolling Tray Rotation: Gently rotates eggs for optimal incubation conditions
-
-16%
Propellers 8045(8X4.5) ABS Props have high quality propellers especially designed for multi copters. Black Propellers 8045(8X4.5) ABS Props has 15 degree angle design in the end of the propeller to avoid whirlpool multi copter flying. The Propellers 8045(8X4.5) ABS Props are light in weight and have high strength propellers. These are used in the drones as well as multi copters . The props have light weight, to help improve the air-powered efficiency and aero foil stability.
-
-23%
8051 Atmel AT89C51 Microcontroller 8-bit
Original price was: ₨520.00.₨415.00Current price is: ₨415.00. Quick View- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
8051 is an 8-bit family of microcontrollers developed by Intel. This microcontroller was also referred as a system on a chip because it has 128 bytes of RAM, 4K bytes of ROM, 2 Timers, 1 Serial port, and four ports on a single chip. The CPU can work for only 8 bits of data at a time because 8051 is an 8-bit processor. In case the data is larger than 8 bits then it has to be broken into parts so that the CPU can process conveniently.
-
-28%
The 8085 is an 8-bit general purpose microprocessor that can address 64K Byte of memory. It has 40 pins and uses +5V for power. It can run at a maximum frequency of 3 MHz.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
-
This tiny speaker is the perfect addition to any small audio project where you need an8impedance.
-
-30%
8×8 Dot Matrix MAX7219 MCU Control Display Generic Module
Original price was: ₨572.00.₨415.00Current price is: ₨415.00. Quick View- Operating Voltage: 4.7V 5.3V
- Operating Current: 320mA
- Max Operating Current: 2A
- Display type: LED
- Mounting: THT
- Display type: Matrix
- Display resolution: 8×8
- Color: Red
- Common electrode: Cathode
-
-21%
9N90 is a N-Channel enhancement mode power mosfet.
-
-35%
Out Of Stock9V 0.5A Adapter Power Adapter 9V 500mA
Original price was: ₨385.00.₨259.00Current price is: ₨259.00. Quick View- Input: AC100 – 240 V 50 / 60Hz
- Output: DC9 V, 500 mA
- DC: 24 AWG, copper, cable length: 1 , 2 m
- DC Jack: 5.5 x 2.1 x 10 mm
-
-39%
9V 1.5A Adapter Power Adapter 9V 1500mA
Original price was: ₨572.00.₨363.00Current price is: ₨363.00. Quick View- Input: 100 – 240 V AC;
- Output: DC 9V, 1500mA;
- Safety features: high efficiency and reliability;
- Low interference and noise;
- Our products are CE / FCC / RoHS, tested by the manufacturer to meet and / or exceed OEM specifications
- Compatible with led Lamps
-
This is 9V DC battery clip.
-
-14%
A Pair of Yellow Rubber Tire Wheel for Robots
Original price was: ₨208.00.₨186.00Current price is: ₨186.00. Quick View- Material: ABS Plastic
- Color: Rim-Yellow; Tire-Black
- Internal Axle Diameter: 3.7mm x 5.3mm
- Dimension: 66 x 27mm
- Quantity: 2 wheels
-
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
-
-24%
A2212 – 1400KV BLDC Brushless Motor
Original price was: ₨1,560.00.₨1,226.00Current price is: ₨1,226.00. Quick View- KV: 1400
- No-load Current : 10 V : 0.5 A.
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 934;3.17mm
- Shaft diameter: 3.175mm.
- Minimum ESC Specification: 18A (30A Suggested)
- Thrust @ 3S with 1045 propeller: 1000gms approx.
- Thrust @ 3S with 0945 propeller: 650gms approx.
- Thrust @ 3S with 0845 propeller: 550gms approx
-
-26%
A2212 1000KV Brushless DC Motor
Original price was: ₨1,560.00.₨1,196.00Current price is: ₨1,196.00. Quick View- Model: A2212 10T
- Motor KV (RPM/V): 1400
- Maximum Efficiency: 80%
- Current Capacity: 16A Per 60S
- No-Load Current(A): 0.7A @10V
- Max. Efficiency Current: 6-12A
- Maximum Watts(W): 180
- Internal Resistance(mΩ): 65
- Poles: 14
- Shaft Diameter (mm): 3.17
- LiPO Batteries: 2S-3S
- Length (mm): 27.5
- Width (mm): 26.5
- Weight (gm): 62
-
-23%
A2212 2200KV Brushless DC Motor BLDC
Original price was: ₨1,560.00.₨1,247.00Current price is: ₨1,247.00. Quick View- Recommended Voltage: 2-12VDC
- Internal Resistance: 90mΩ
- Shaft Size: 3.17mm (1.8″)
- Shaft Length: 11mm
- Motor Diameter: 27.5mm
- Motor Length (Overall): 40mm
- Current Capacity: 12A/60s
- Max Efficiency: 80%
- Max Power: 239W
- Recommended ESC: Minimum Of 18A
- Recommended Model Weight: 300-1000g
- Mounting Holes: M3
- Wire Length: ~70mm
-
-13%
A3967 Stepper Motor Driver Module
Original price was: ₨416.00.₨374.00Current price is: ₨374.00. Quick ViewThis EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.
-
-26%
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
-
AA 2Cell holder especially design for student science project kit and many more application in 3 volt supply.
-
AA 4 Cell Battery Holder Need 6V 1.5V cell or 4.8V with 1.2V cell to run a project on AA batteries This is a simple battery holder that we use in some of our kits. What we like about these are the leads that come pre-attached, ready to be soldered to a PCB, or attached with your choice of connector.
- Two mounting holes to accept flush head screws.
- You can also use high adhesive double-sided tape, or a glue gun to attach to your project or prototype.
- This battery holder has two wires 6 inches of 24-gauge leads that have 5 mm of insulation stripped off of the ends.
-
-47%
ABS Enclosure Black Case for Raspberry Pi with Heat Sink And 5v Fan
Original price was: ₨2,080.00.₨1,143.00Current price is: ₨1,143.00. Quick ViewThis Raspberry case is made of ABS material. It can be perfectly compatible with Raspberry Pi 4B. Considering the high power consumption cost of Raspberry Pi 4B, the Raspberry case has room to add a fan (35x35x10mm) and general copper/aluminum heatsink (up to 6mm) for heat dissipation. What’s more The case supports the GPIO PINs of the Raspberry Pi 4B and connects external devices like Raspberry Pi Hat outside the case by cables. Also, the ventilation openings are designed on the top and bottom of the case to keep cooling.
-
-15%
AC 220V 100W Aluminum PTC Heater Thermostat Plate
Original price was: ₨1,768.00.₨1,559.00Current price is: ₨1,559.00. Quick ViewItems details AC 220V 100W Aluminum PTC Heater Thermostat Heating Plate constant temperature basic parameter: PTC heater size: 67*70*6mm AC 220 volts 100 watts,250-260 degree Celsius automatic constant temperature.
-
-31%
AC 220V Temperature Controller RKC REX-C700
Original price was: ₨3,640.00.₨2,599.00Current price is: ₨2,599.00. Quick View- Type: Digital
- Theory: Temperature Controller
- Usage: Industrial
- Model Number: REX-C700 Power
- Type: Charger Display
- Size:1.9 Inches & Under Max
- Measuring Temperature:120°C & Above
- Style: Standing Station
- Size:72*72mm
- Input: Universal Control
- output: Relay Alarm
- Display: Celsius °C Unit
- Type: piece
- Package Weight: 0.4kg (0.88lb.)
-
-34%
Acrylic Rectangle 0.56 Inch 3 Digit 7 Segment Display
Original price was: ₨135.00.₨93.00Current price is: ₨93.00. Quick View- Operating current: 10mA
- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Low Current Consumption
- High Brightness
- Blackface and RED LED segments
-
-10%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -20A~ 20A
- Sensitivity: 100mV/A
- The current sensor chips: ACS712_ELC-20A.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
- The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
-
-14%
Out Of StockACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
-
-10%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
-
Activity High Quality 50g or 100g Soldering Wire for Soldering Works
Price range: ₨373.00 through ₨758.00 Quick View- Diameter: 0.031″ (0.8mm)
- Weight: 0.11lbs (50g) or (100g)
- Composition: 70% Tin, 30% Lead
- Rosin Flux Content: 2%
-
-42%
Out Of StockAD112-50FM Digital Multifunction Power Meter – LCD Display | AC Voltage, Current, Power, Frequency & Energy Monitor
Original price was: ₨5,192.00.₨3,119.00Current price is: ₨3,119.00. Quick View- Voltage Range: AC 80.0-300.0V
- Current Range: AC 0-99.99A (0.01A resolution)
- Power Factor: 0.00-1.00PF
- Active Power Range: 0-45,000W
- Energy Measurement: 0-99,999kWh
- Operating Temperature: -25°C to 85°C
- Dimensions: 79 x 43 x 48mm
-
-23%
Out Of StockThe AD7528 is a monolithic dual 8-bit digital/analog converter featuring excellent DAC-to-DAC matching. It is available in skinny 0.3″ wide 20-lead DIPs and in 20-lead surface mount packages. Separate on-chip latches are provided for each DAC to allow easy microprocessor interface.
-
-14%
Out Of StockAdjustable Soldering Iron 80W 220V/110V LCD Digital Display
Original price was: ₨2,080.00.₨1,871.00Current price is: ₨1,871.00. Quick View -
-35%
ADS1115 Analog-to-Digital Converter
Original price was: ₨1,144.00.₨779.00Current price is: ₨779.00. Quick View- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
-
-23%
Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.
-
-36%
AMTECH RMA223 RMA-223 RMA559 Solder Paste Flux 10CC
Original price was: ₨311.00.₨207.00Current price is: ₨207.00. Quick View- Flux Type: Original AMTECH RMA-223 UV (Made in USA)
- Volume: 10ml/10cc
- Dimension: 93 x 33 x 23mm
- Material: the mixture of high-quality alloyed powder and resinic pasty flux, it can avoid the pale yellow residue.
- Color: Colorless/Transparent
- Insulated: Yes
- With Needle Tip: Yes
- Made in: USA
- Application: for soldering and reballing of computer and phone chips.
- Advantage: Good immersion and high-intensity joint.
- Function: for PCB, BGA, and PGA reworking.
- 100%: New Type, high quality.
-
-23%
Out Of StockThis analog multimeter has a capability of measuring DC voltages having four range setting, DC current having three range setting, AC voltages having four range setting and resistance having three range setting.
-
-17%
Out Of StockAnalog Servo HD 1501mg
Original price was: ₨6,032.00.₨5,199.00Current price is: ₨5,199.00. Quick ViewIt is a metal geared analog servo which can deliver extra high torque as compared many high power servo motors
-
-28%
Out Of StockAnalog Timer H3BA-8 24VDC Timer Relay
Original price was: ₨2,652.00.₨1,975.00Current price is: ₨1,975.00. Quick View -
-26%
Analog Timer Relay H3BA-8 12V
Original price was: ₨1,612.00.₨1,247.00Current price is: ₨1,247.00. Quick View- Model: H3BA-8
- Brand: Omron
- Output: DPDT
- Usage/Application: INDUSTRIAL
- Rated Current: 5A 12VAC
- Mounting Type: Panel Mounting Timer
- Display Type: Analog
- Automation Grade: Semi-Automatic
-
-26%
Analog Timer Relay H3BA-8 220V
Original price was: ₨1,560.00.₨1,195.00Current price is: ₨1,195.00. Quick View- Model: H3BA-8
- Brand: Omron
- Output: DPDT
- Usage/Application: INDUSTRIAL
- Rated Current: 5A 220VAC
- Mounting Type: Panel Mounting Timer
- Display Type: Analog
- Automation Grade: Semi-Automatic
-
-43%
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
-14%
- Charge your smartphone with this Micro USB cable
- Enjoy smooth data transfers to/from computer, laptops
- 1.5 Meter length cable
- Lasts upto 10X longer than conventional cable.
- Safe & Smart
- Durable Product
-
Android charging cable for smart phones.
-
-30%
ANENG ST212 Digital DC/AC Clamp Meter Current 400A Amp Multimeter Large Color Screen
Original price was: ₨11,440.00.₨8,319.00Current price is: ₨8,319.00. Quick View- AC Current Range: 60A/400A
- DC Current Range: 60A/400A
- DC Voltage Range: 600V/600mV
- AC Voltage Range: 600V/600mV
- Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/60mF
- Temperature: -40~1000℃, -40~1832℉
- Frequency: 60Hz/1000Hz
- Colour: Red
- Material: ABS
- Display: LCD
- Max. Display Value: 6000 digit
- Sampling Time: About 3 times/second, bargraph 10 times/second
- Auto-off: 15 minutes
- Operating Temperature: 18~28℃
- Storage Temperature: -10~50℃
- Operating Height: Max. 2000m
- Power Supply: 2 * 1.5V AAA battery (NOT included)
- Item Size: 182 * 62.1 * 33.4mm / 7.17 * 2.44 * 1.31in
- Item Weight: 150g / 5.29oz
- Package Weight: 272g / 9.59oz
- Package Size: 21.7 * 8.5 * 4.5cm / 8.54 * 3.35 * 1.77in
-
-28%
APDS9960 proximity and light intensity sensor I2C 3.3V
Original price was: ₨831.00.₨623.00Current price is: ₨623.00. Quick View- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
-
-19%
Out Of StockThe power module has the ability to provide APM lossless power from a LiPo battery as well as current consumption and voltage measurements through 6-pos cable. The on board regulator switch has the ability of giving outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.
-
Out Of StockThe ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.
This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
-
-24%
Out Of StockAPM2.8 ArduPilot Mega 2.8 Flight Control Board
Original price was: ₨19,760.00.₨15,600.00Current price is: ₨15,600.00. Quick ViewThis is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.
-
-27%
Arduino 28BYJ48 Stepper Motor
Original price was: ₨476.00.₨363.00Current price is: ₨363.00. Quick ViewArduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:
-
-11%
Out Of Stock -
Out Of Stock- It is well designed to be durable during handling and repeated connections.
- Cable transfer speed is up to 480Mbps.
- USB Type: 2.0
- Data transfer rate: up to 480Mbps
- Connectors: USB type A tata-USB type B tata
- Length: 1.3 m
- Color: BLUE
-
-23%
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
-
-31%
Arduino Due AT91SAM3X8E ARM Cortex-M3 Board
Original price was: ₨6,490.00.₨4,680.00Current price is: ₨4,680.00. Quick View- MicrocontrollerAT91SAM3X8E
- Operating Voltage3.3V
- Input Voltage (recommended)7-12V
- Input Voltage (limits)6-16V
- Digital I/O Pins54 (of which 12 provide PWM output)
- Analog Input Pins12
- Analog Output Pins2 (DAC)
- Total DC Output Current on all I/O lines130 mA
- DC Current for 3.3V Pin800 mA
- DC Current for 5V Pin800 mA
- Flash Memory512 KB is all available for the user applications
- SRAM96 KB (two banks: 64KB and 32KB)Clock Speed84 MHz
- Length101.52 mm
- Width53.3 mm
- Weight36 g
-
-44%
Arduino Jumper Wire F/F 40Pcs
Original price was: ₨312.00.₨182.00Current price is: ₨182.00. Quick View- 40 pieces of the 10cm female to female color Dupont jumper wires cables in one set will be sold together.
- Color: as shown in the pictures.
- Material: durable hard plastic and copper wire.
- Each cable length: about 10cm /3.94 .
- Connectors: 1pin-1pin female to female header.
- 100% brand new and high quality 2.54mm Female to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
- Compatible with 2.54mm spacing pin headers.
- A popular choice for the construction or repair.
- Can be used for electronic project and Genuine Arduino products.
- Easy to install and use, durable and reusable to use.
-
Arduino jumper wire, male to male connector.
-
-43%
Arduino Jumper Wire M/F 40Pcs
Original price was: ₨312.00.₨186.00Current price is: ₨186.00. Quick View- Color: Multicolor.
- Material: durable hard plastic andcopper wire.
- Each cable length: about 10cm /3.94/.
- Connectors: 1pin-1pin male to female header.
- 100% brand new and high quality 2.54mm Male to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
- Compatible with 2.54mm spacing pin headers.
- A popular choice for the construction or repair.
- Can be used for electronic project and Genuine Arduino products.
- Easy to install and use, durable and reusable to use.
-
Arduino jumper wire, male to male connector.
-
-41%
Arduino Jumper Wire M/M 40Pcs
Original price was: ₨312.00.₨192.00Current price is: ₨192.00. Quick View- Compatible with 2.54 mm spacing pin headers.
- 120 pcs chromatic color jump wire.
- High quality and in good working condition.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Be used for the electronic project and Genuine Arduino product.
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
-
-12%
he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
-
Hot-36%
Arduino MEGA 2560 PRO Mini
Original price was: ₨4,680.00.₨3,119.00Current price is: ₨3,119.00. Quick View- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature 40C/+85C
- Length x Width:38mmx54mm
-
Hot-11%
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board
Original price was: ₨4,160.00.₨3,847.00Current price is: ₨3,847.00. Quick View- Arduino Mega 2560 rev3 ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
-
Hot-44%
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board With Logo
Original price was: ₨6,240.00.₨3,639.00Current price is: ₨3,639.00. Quick View- Arduino Mega 2560 rev3 ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
-
Hot-56%
- Microcontroller: Atmel ATmega168 or ATmega328.
- Operating Voltage (logic level): l5 V.
- Input Voltage (recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB is used by the boot loader.
- SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
- EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
- Clock Speed: 16 MHz.
- Dimensions : 0.73 x 1.70
- Length: 45 mm.
-
-18%
The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.