-
-22%
Battery lugs are an important component to creating a solid connection between your battery cable and the battery that powers your electrical system. Buy the best quality battery lugs from ElectroNation.
-
-24%
Out Of StockINTRODUCTION
This product includes 3-pin 2.0mm(0.08″) mating connector housing(10 units) and crimp pins (30 units).They work with wires ranging from 28 to 26 AWG. -
-46%
- Camera Exposure control
- Auto slide focus dual cell
- Photocopy machines density of toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales dual cell
- Automatic gain control modulated light source
- Automated Rear View Mirror
-
-46%
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
-
-24%
- small size switch (6mm x 6mm)
- snap-in type switch
- perfect to be soldered on a board
- can be used as a reset switch
- input voltage: min. 1 V max. 12 V
- input current: min. 10 uA max. 50 mA
- operating temperature: 25C to +70C
- travel: 0.25 mm
- number of pins: 4
-
-24%
- Voltage rating: 12VDC
- Current rating: 50mA
- Contact resistance: 30m
- Insulation resistance: 100M
- Bounce time: 10msec
- Operating force: 2.550.69 N
- Operating temperature range: -30 to 70
-
-37%
- Size 12Inch
- Type: self-locking nylon cable tie
- Material: Nylon66 Cable Tie
- Feature: Heat resistant, erosion control, insulate well.
- Operation Temperature: -40 c to 85c
- Colour: Natural (white or standard colour), UV black.
- Package: Polybag + Label (100pcs/bag)
- To keep all wires in place this product is what u are waiting for.
-
-24%
A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package.
A DIP switch also known as DIP switches, toggle switch, over clocking switch, the address switch, mired switch, digital switch, DIP switch
DIP switches are an alternative to jumper blocks. Their main advantages are that they are quicker to change and there are no parts to lose.
-
-23%
- Case: R-6
- Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C
- Terminals: Finish Tin. Axial Leads, Solderable per MILSTD-202, Method 208
- Polarity: Color Band Indicates Cathode
- Approximate Weight: 2.1 grams
-
LM324 Operational Amplifier IC LM-324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages. Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902) Dual Supplies: 1.5 V to 16 V (13 V for LM2902) Low Supply-Current Drain.
-
The LM741 series are general-purpose operational amplifiers which feature improved performance over industry.The amplifiers offer many features : overload protection on the input and output, no latch-up when the common-mode range is exceeded, as well as freedom from oscillations. The LM741C is identical to the LM741 and LM741A except that the LM741C has their performance ensured over a 0C to +70C temperature range, instead of 55C to +125C.
-
- Low Voltage and Standard-Voltage Operation
- 2-wire Serial Interface
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Bi-directional Data Transfer Protocol
- 100kHz and 400kHz Compatibility
- Write Protect Pin for Hardware Data Protection
- 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
- Partial Page Writes are Allowed
- Self-timed Write Cycle (10mS max)
-
A potentiometer knob is an accessory that is used as a control knob for a potentiometer.
-
BT134 Triac – 600V – 4A (BT134-600E) Triac they are used in AC switching and control applications with current ratings from under 1A to 40A rms. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. It has Maximum Terminal current: 4A, Max Terminal Voltage is 600 V, Gate trigger current: 25mA & On-state Gate voltage: 1.7V.
-
- Manufactured using high quality and excellent durable materials.
- Perfect replacement for the original Charging Connector.
- Precision machining fits the cell phone perfectly.
- High-quality OEM product, tested and quality checked for each piece before shipping.
- This part is not returnable so please be sure that you are purchasing the proper & correct part for your specific device.
- The image shown is for presentation purposes only, the actual product will be different from what shown in the image.
-
Features:- Type: SPDT
- Total Size:9mm x 4.5mm x 11mm
- Knob Size:2mm x 2mm x 3mm
- Rated Road: DC 50V 500mA
- Mounting Type: Through-hole
- Pin Pitch:2mm
-
- Contact rating: MAX 3A 12V DC
- Connector size: 2.1mm x 5.5mm x 9mm Gold Plated
- Product size: 10mm x 10mm x18mm
- Max panel depth: 3mm
- Fitting hole of 7.8mm required | Requires total clearance behind a panel of 13mm
-
A switch is an electrical component that can make or break an electrical circuit, interrupting the current or diverting it from one conductor to another. This switch has 2 positions i.e. on-off.
-
A switch is an electrical component that can make or break an electrical circuit, interrupting the current or diverting it from one conductor to another. This switch has 2 positions i.e. on-off.
-
The SN74HC244N is an Octal Buffer and Line Driver IC, designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. This device organized as two 4-bit buffers/drivers with separate output-enable (OE)/inputs. When OE/ is low, the device passes non-inverted data from the A inputs to the Y outputs. When OE/ is high, the outputs are in the high-impedance state.
-
The 4072 is a member of the 4000 Series CMOS range, and contains two independent OR gates, each with four inputs.
-
The CD4040 is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical 1 at the reset input independent of the clock.
-
Buy low price, high quality 8mm push button
-
Buy high quality DC Jack for your printed circuit board. A DC jack is an electrical connector for supplying direct current power.
-
A push-button is a simple switch mechanism for controlling some aspect of a machine or a process. It completes an electric circuit when you press on it. When it’s on, a small metal spring inside makes contact with two wires, allowing electricity to flow.
-
A heat-sink is designed to remove heat from a transistor and dissipate it into the surrounding air as efficiently as possible. Heat-sinks take many different forms, such as finned aluminium or copper sheets or blocks, often painted or anodised matt black to help dissipate heat more quickly. Good physical contact between the transistor and heat-sink is essential, and a heat transmitting grease (heat-sink compound) is smeared on the contact area before clamping the transistor to the heat-sink.
-
-19%
Out Of StockThis 1.5V, LR-1130 Alkaline battery is a small button cell which commonly found in small electronic devices like calculators, watches, scales and small low drain electronic toys. These button cells have a good shelf life and when used in low drain electronic will not need to be replaced at regular intervals. They are also designed to go sustained periods of disuse without losing power.
-
-19%
Out Of StockDF005S Diode Bridge Rectifier 1.5A SOP-4 SMD
Original price was: ₨27.00.₨22.00Current price is: ₨22.00. Quick ViewBridge Rectifiers for PCB Surface Mount.
-
The voltage regulator IC maintains the output voltage at a constant value. 7805 provides +5V regulated power supply. Input voltage range 7V- 35V Current rating Ic = 1A Output voltage range VMax=5.2V ,VMin=4.8V.
-
BC134 is a NPN type transistor. Its Maximum Collector-Base Voltage |Vcb|: 45 V & Maximum Collector Current |Ic max|: 0.2 A.
-
BC109 is a bipolar NPN type transistor. It has Collector-Emitter Volt (Vceo): 20V & Collector Current (Ic): 0.2A.
-
-29%
Banana clip female small used in power supply.
-
-17%
Mini Bulb Holder DIY Physical Circuit Electrical Experiment Lighting Accessories Screw Type Light Socket Mounting Bracket Round Lamp Base
-
-17%
- Very long operating life (up to 100k hours)
- Available in Red, Yellow, Green, Blue, White
- Low voltage DC operated
- NO ULTRAVOILET radiation
- RoHS compliant — Lead-free
- Suitable for PWM, fully dimmable
- Superior ESD protection
- LAMBERTIAN radiation pattern
-
- 15V Positive Voltage Regulator
- Minimum Input Voltage is 17V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-38%
- It works from a wide range of power supplies ranging from +5V to +18V.
- Sourcing or sinking load current is 200mA.
- The external components must be selected correctly, so that the timing intervals can be completed in several minutes along with the frequencies beyond several hundred kHz.
- The o/p of a 555 timer IC can drive TTL due to its high current o/p.
- It takes a temperature stability of 50 ppm/oC change in temperature (ppm means parts per million)
- The timers duty cycle is adjustable.
- The max power dissipation per package is 600 milliwatts & its reset and trigger i/ps has logic compatibility.
-
-44%
- Achieve the standards of reliable products.
- Good contact interface and fine electrical property.
- Easy to use. No need to cut and solder, plug and operate.
- Firmly connect and safely connect, not loosen.
- Buy with satisfaction and use at ease.
- Work fluency and durability, which saves your time.
- High temperature-resistant covers and copper pins, durable and reliable.
- High matching degree and perfect matching.
-
-29%
Features:
- Connector plug
- Connector type Jack 3,5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
-
This is a rectangular shape fuse holder.
-
It is a type of electrical connector typically used for analog audio signals.
-
A switch is an electrical component that can make or break an electrical circuit, interrupting the current or diverting it from one conductor to another. This switch has 2 positions i.e. on-off.
-
Texas Instruments SN7414 Series Inverters are available at ElectroNation.
-
-30%
15G Solid Rosin Welding Soldering Flux Paste
Original price was: ₨40.00.₨28.00Current price is: ₨28.00. Quick View- Melting point: 125 C
- Neutral PH 7>0.3
- Features:
- .High Quality
- .Fluxing excellent results, joint high intensity
- .Good insulation
- .No corrosion,IC and for no corrosive
- .Smooth welding surface
-
- Carries Low input bias current = 50 pA
- Available with Low input noise current = 0.01 pA/Hz
- Comes with Fast settling time to 0.01% = 2us
- Contains internally trimmed offset voltage = 15 mV
- Carries Low input noise voltage = 16nV/Hz
- Exhibits Low supply current = 3.6 mA
-
- Type – NPN
- Collector-Emitter Voltage: 25 V
- Collector-Base Voltage: 30 V
- Emitter-Base Voltage: 7 V
- Collector Current: 0.05 A
- Collector Dissipation – 0.4 W
- DC Current Gain (hfe) – 130 to 520
- Transition Frequency – 220 MHz
- Noise Figure – 6 dB
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
-
- 2sc925 well known as C945 NPN transistor.
- Max Voltage Collector Emmiter=50 V.
- Max Collector current=150 mA.
- Collector power dissipation: 400 mW.
- Japanese High-frequency amplifier NPN Transistor.
- Current Gain (hFE) is 70 to 700 (high linearity).
- Continuous Collector current (IC) is 150mA.
- Collector-Emitter voltage (VCEO) is 50 V.
- Collector-Base voltage (VCB0) is 60V.
- Emitter Base Voltage (VBE0) is 5V.
- Transition Frequency is 150MHz.
-
-17%
LM386 LM-386 Audio Amplifier Chip
Original price was: ₨35.00.₨29.00Current price is: ₨29.00. Quick ViewLM386 is a widely used audio amplifier IC manufactured in 8 pin dip, VSSOP, SOIC and other packages. The IC is basically designed for low voltage commercial applications, apart from commercial applications it is also a famous IC among electronic hobbyists and experimenters. The internal gain of the IC is set to 20 but it can be adjusted by connecting a resistor and a capacitor in series between the pin number 1 and 8, by this procedure the user can adjust the gain between 20 to 200. Due to the small size, low quiescent current and low voltage requirements this IC is ideal to use in wide variety of portable battery operated applications and devices.
-
-36%
LM393 Dual COMPARATOR Low Offset Voltage IC
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick View- Voltage Comparator circuits
- Can drive Relay, Lamp, Motor Etc
- Zero Crossing detector
- Peak voltage Detector
- High Voltage protection/Warning
- Oscillator circuits