-
ESC 30A Standard 30A BLDC ESC Electronic Speed Controller
Original price was: ₨1,800.00.₨1,399.00Current price is: ₨1,399.00. Quick ViewStandard 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs.
-
Esp Adaptor with Temp Sensor
Original price was: ₨640.00.₨550.00Current price is: ₨550.00. Quick ViewESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
-
ESP-01 Adapter Module 3.3-5V
Original price was: ₨270.00.₨249.00Current price is: ₨249.00. Quick View- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
-
- Added six I/O serial and six SPI serial
- Support wireless 802.11 b/g/n standard
- Support the STA/AP/STA AP three work modes
- Built-in TCP/IP protocol stack, and support multiple TCP Client connection
- Support rich Socket the AT command
- Support UART/GPIO data communication interface
- Support Smart Link intelligent networking
- Support remote firmware update (OTA)
-
ESP32 CAM MB USB Programmer Board CH340G USB To Serial Port
Original price was: ₨650.00.₨449.00Current price is: ₨449.00. Quick View-
Driver Compatibility: Requires CH340G driver installation for proper operation.
-
Supported Devices: Compatible with all ESP32-CAM boards.
-
Button Types: Includes Reset and Boot buttons.
-
LED Indicators: Power status indication.
-
-
ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3
Original price was: ₨2,400.00.₨1,499.00Current price is: ₨1,499.00. Quick View- 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
- Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
- Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
- Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
- Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
- Bluetooth 5 (LE)
- 45 programmable GPIOs
- No integrated ethernet MAC
- 2 × 12-bit SAR ADCs, up to 20 channels
- USB OTG
-
ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module
Original price was: ₨2,000.00.₨1,139.00Current price is: ₨1,139.00. Quick View- CPU Tensilica Dual-Core 32-bit 240 MHz LX6 processors, integrated 520 Kb SRAM
- Wifi 802.11 b/g/n/e/i
- Bluetooth v4.2 BR/EDR and BLE
- Memory 4 MByte Flash
- Temperature Range -40 to 125 Deg C.
-
ESP32 WROOM-32 Wifi+Bluetooth MCU Module 30 Pin
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00. Quick View- Single or Dual-Core 32-bit LX6 Microprocessor with clock frequency up to 240 MHz.
- 520 KB of SRAM, 448 KB of ROM and 16 KB of RTC SRAM.
- Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
- Support for both Classic Bluetooth v4.2 and BLE specifications.
- 34 Programmable GPIOs.
- Up to 18 channels of 12-bit SAR ADC and 2 channels of 8-bit DAC
- Serial Connectivity includes 4 x SPI, 2 x I2C, 2 x I2S, 3 x UART.
- Ethernet MAC for physical LAN Communication (requires external PHY).
- 1 Host controller for SD/SDIO/MMC and 1 Slave controller for SDIO/SPI.
- Motor PWM and up to 16 channels of LED PWM.
- Secure Boot and Flash Encryption.
- Cryptographic Hardware Acceleration for AES, Hash (SHA-2), RSA, ECC and RNG.
-
ESP32-CAM WiFi + Bluetooth Camera Module
Original price was: ₨1,900.00.₨1,599.00Current price is: ₨1,599.00. Quick View- Module Model: ESP32-CAM
- Package: DIP-16
- Size: 2740.54.5(?0.2)mm
- SPI Flash: Default 32Mbit
- RAM: Internal 520KB + External 4M PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/e/i
- Support Interfaces: UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Port: 9
- Serial Port Rate: Default 115200 bps
- Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
- Antenna: Onboard PCB antenna with a gain of 2dBi
- Power Supply Range: 5V
- Operating Temperature: -20°C to 85°C
-
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP Protocol Stack
- Integrated TR switch, balun, LNA, power amplifier, and matching network
- Integrated PLLs, regulators, DCXO, and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1 Mb flash memory
- Integrated low-power 32 bit CPU could be used as an application processor
- SDIO 1.1/ 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU and A-MSDU aggregation and 0.4ms guard interval
- Wake up and transmit packets in <2ms
- Standby power consumption of <1.0mW(DTIM3)
-
ESP8266 ESP12E -NODEMCU – CH340
Original price was: ₨799.00.₨559.00Current price is: ₨559.00. Quick View- Input Voltage: 2.5 ~ 3.6V
- Operating Voltage: 3.3V
- CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
- 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
- 512 KB of EEPROM (512x Arduino UNO!)
- External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
- IEEE 802.11 b/g/n Wi-Fi
- Integrated TR switch, balun, LNA, power amplifier and matching network
- WEP or WPA/WPA2 authentication, or open networks
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 Mhz
- 80 Mhz clock (5x arduino UNO or mega!)
-
ESP8266 NodeMCU V1.0 ESP-12E WiFI Module
Original price was: ₨400.00.₨369.00Current price is: ₨369.00. Quick View- Microcontroller: ESP-8266 32-bit
- Clock Speed: 80 MHz
- USB Converter: CP2102
- USB Connector: Micro USB
- Operating Voltage: 3.3V
- Flash Memory: 4 MB
- Digital I/O: 11
- Analog Inputs: 1
- Communications: Serial, SPI. I2C and 1-Wire via software libraries
- WiFi: Built-in 802.11 b/g/n
-
ESP8266 Witty Cloud ESP-12F WiFi Module
Original price was: ₨1,099.00.₨899.00Current price is: ₨899.00. Quick View- LDR Light Sensor on board.
- WS2812 Led on board.
- Includes CH340G USB-to-UART programmer.
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
- Supports 3 modes: AP, STA, AP+STA.
- Dimensions: 24mm x 16mm.
- Micro USB connection for power and/or programming
-
STM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART
-
Extruder Kit With NEMA 17 Stepper Motor
Original price was: ₨6,500.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewBuy Nema 17 with MK8 Aluminum Extruder Kit At electronation in best price
-
Ferric Chloride for PCB Etching
Original price was: ₨260.00.₨199.00Current price is: ₨199.00. Quick View1. Suggested only if you know how to etch PCBs with FeCl3.
2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.
3. Mix etchant in water, do not drop water over the etchant.
4. Do an etching procedure in open space so any chemical gas produced during the process can dissipate in the air easily.
5. Put etchant+water solution in the plastic box only.
Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.
Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measures are in place like hand gloves, glasses, etc.
-
- Photosensitivity is high
- Response time is fast
- Simple to use
- Sensitivity is adjustable
- Detection angle is 600,
- It is responsive to the flame range.
- Accuracy can be adjustable
- Operating voltage of this sensor is 3.3V to 5V
- Analog voltage o/ps and digital switch o/ps
- The PCB size is 3cm X 1.6cm
- Power indicator & digital switch o/p indicator
- If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
-
- Angle Displacement Measurement
- Bends and Flexes physically with motion device
- Possible Uses
- Simple Construction
- Low Profile
- Physical Therapy
- Musical Instruments
- Computer Peripherals
- Medical Devices
- Gaming (Virtual Motion)
- Robotics
-
- Thickness: 0.4mm
- Trigger Force: 20g, triggered (default resistance<200kΩ)
- Pressure Measuring Range: 20g~6kg
- Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
- Initial Resistance: >10MΩ
- Activation Time: <0.01S
- Operating Temperature: -40℃~+85℃
- Lifespan: >1million times
- Hysteresis: +10%,(RF+ -RF-)/FR+,1000g Force
- Response Time: <10ms
- Drift: <5%, 2.5Kg Force, Static load 24H
-
FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver
Original price was: ₨19,850.00.₨13,999.00Current price is: ₨13,999.00. Quick ViewThe FS-CT6B is a professional and practical 2.4GHz 6-Channel digital LCD transmitter, which is equipped with a FS-R6B receiver to make a digital proportional radio control system, and suitable for RC airplane, glider and helicopter. The transmitter adopts easy-to-read LCD screen to show the working status.
-
Force Sensitive Resistor – Small
Original price was: ₨1,899.00.₨1,299.00Current price is: ₨1,299.00. Quick ViewThis is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.
Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.
These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.
-
Force Sensitive Resistor 0.5 INCH FSR
Original price was: ₨1,350.00.₨1,150.00Current price is: ₨1,150.00. Quick View- Detection area (detection range): 14.5 mm circle
- Physical Diameter: 18.3mm circle
- The output signal (output signal): Passive variable to hold
- The Force-sensitive range (range), pressure test: 100g to 10 kg
- Lifespan (life):> 10 m letter actuation
Dimensions:
- Total length: 56mm
- Overall width: 18.3mm
- Diameter detection: 14.5mm
- Thickness: 0.4mm
-
FlySky Introduces its newest 6 channel 2.4GHz system, The FS-T6. After years of success with the CT6B, FlySky presents the new FS-T6 with loads of cool and convenient features making the operation of this transmitter simple and instinctive.
The 6-channel FlySky FS-T6 is the perfect transmitter for sport modelers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and airplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.
Programming the FS-T6 is very easy and intuitive. It is implemented with a simple click and scroll dial allowing quick and easy menu navigation and manipulation. The large backlite LCD screen with large fonts is easy to read and the simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you’re making.
FlySky AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz system offers a lot of advantages. It is equipped with a super active and passive anti-jamming capability and has very low power consumption with high receiver sensitivity. The 2.4GHz system puts the radio out of the frequency range by any generated by other electronic components in your model such as the brushless motor, speed controller, servos, or other metal to metal noise. This eliminates interference and glitching that can plague a traditional radio system. Extreme rigorous testing by FlySky engineers makes this AFHDS system solid and worthy.
-
The Flysky FS-TH9x 9ch radio is the original high value 9ch system. These pack all the features of a 400 radio, and yet cost less than a quarter of that price.
The flysky module keeps the antena at the back of the radio- which allows for easier modification (such as mounting a FPV screen) and module switching.
-
FSR402 Force Sensitive Resistor FSR
Original price was: ₨2,000.00.₨1,450.00Current price is: ₨1,450.00. Quick ViewThe FSR is made of 2 layers separated by a spacer. The more one presses, the more of those Active Element dots touch the semiconductor and that makes the resistance go down. FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it is pressed. These sensors are fairly low cost, and easy to use but they’re rarely accurate. They also vary some from the sensor to sensor perhaps 10%. So basically when you use FSRs you should only expect to get ranges of response. While FSRs can detect weight, they’re a bad choice for detecting exactly how many pounds of weight are on them. However, for most touch-sensitive applications like “has this been squeezed or pushed and about how much” they’re a good deal for the money!
-
FTDI FT232 USB UART Board (mini)
Original price was: ₨700.00.₨319.00Current price is: ₨319.00. Quick View- Original FT232RL onboard
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10…
- 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V)
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Functional Pins
- TXD, RXD, RTS#, CTS# : connected to the onboard soldered pinheaders
- The other Pins : accessable on the drill holes (separate pinheaders are also provided for easily connecting to user system, the pitch is compatible with bread boards)
-
This is a rectangular shape fuse holder.
-
Color:
BlackAcceptable Fuse Size:
6x30mmPermissible Temp. With / Without load:
-20°Cto +85°CH. V. Break Down for 1 minute:
2 KVACInsulation Resistance at 500VDC:
1000 MohmFuse Holder Size (Dia. x Length):
17 x 48mm -
G2R is a power relay with a coil rated voltage of 6V. The relay have 5 pins, with good quality and long operational life.
-
Slim and space saving power plug-in relay.
-
G2R1 is a power relay with a coil rated voltage of 12V. The relay have 5 pins, with good quality and long operational life.
-
G2R1 is a power relay with a coil rated voltage of 24V. The relay have 5 pins, with good quality and long operational life.
-
Glass Electric Mercury Tilt Switch
Original price was: ₨60.00.₨49.00Current price is: ₨49.00. Quick View- Voltage: 20 V
- Current: 300 mA
- Operating Angle: 5o to 10o
- Size: 5 mm
- Length: 13 x 1 mm
- Diameter: 4 mm to 5 mm
-
Goot 30W Soldering Iron KS-30R
Original price was: ₨950.00.₨749.00Current price is: ₨749.00. Quick View- Manufacturer: Goot
- Model: KS-30R
- Color: Blue
- Material: ABS
- Power: 30W
- Working Voltage: AC220V / 50Hz
- Soldering Iron Length: Approx. 32cm
- Power Cord Length: Approx. 123cm / 48.43in
- Item Weight: Approx. 50g
- Package Weight: Approx. 134g / 4.71oz
-
Goot 30W Soldering Iron Tip Solder Iron Bit R-48B
Original price was: ₨160.00.₨119.00Current price is: ₨119.00. Quick ViewThis is a soldering iron bit for 30W.
-
Goot 40W Soldering Iron KS-40R
Original price was: ₨1,050.00.₨799.00Current price is: ₨799.00. Quick View- Manufacturer: Goot
- Model: KS-40R
- Color: Blue
- Material: ABS
- Power: 40W
- Working Voltage: AC220V / 50Hz
- Soldering Iron Length: Approx. 32cm
- Power Cord Length: Approx. 123cm / 48.43in
- Item Weight: Approx. 50g
- Package Weight: Approx. 134g / 4.71oz
-
GOOT GS-100 GS100 Desoldering Pump
Original price was: ₨500.00.₨449.00Current price is: ₨449.00. Quick ViewJumbo Size: large vacuum capacitySelf-cleaning Axis: When the plunger is pushed, a piston expands the nozzle.Plunger Lock Function: The plunger can store the shaft inside by pushing it in full, and pressing the vacuum shutter release button. -
Goot KX-60R Electrical Soldering Iron 60W
Original price was: ₨1,150.00.₨849.00Current price is: ₨849.00. Quick View- Power Output: 60 watts
- Voltage: Designed for standard electrical outlets (AC power)
- Temperature Range: Typically ranges from 250°C to 500°C (482°F to 932°F)
- Heating Element: High-quality heating element for rapid heating and efficient soldering
- Heat Recovery Time: Fast heat recovery for minimal downtime between soldering joints
- Tip Compatibility: Compatible with a variety of soldering iron tips for different soldering tasks and applications
- Construction: Durable construction for long-lasting performance and reliability
- Ergonomics: Ergonomic design for comfortable grip and reduced hand fatigue during extended use
-
This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.
-
GPS Neo 6m U-Blox NEO-6M GPS Module
Original price was: ₨1,999.00.₨899.00Current price is: ₨899.00. Quick View- 5Hz position update rate
- Operating temperature range: -40 TO 85C UART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separate GPS antenna
-
Buy best quality Universal GPS stand.
-
- Operating Voltage is 5V
- it is with Chinese font
- it has a blue backlight
- Controller used in it ST7920
- its Size is 93x70mm
- It displays 20 characters in 4 lines.
- Its input voltage range is 4.5V to 5.5V.
- The operating voltage for LCD is 5V Direct Current (DC).
- Its interface consists of 6800 8 bit parallel.
- Positive transflective is its display type.
- Its backlight consists of blue and green.
-
INTRODUCTION
This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.
Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.
-
GSCETE Cm500a Professional Digital Clamp Multimeter DC/AC Automotive Electrician Tester 400A/500A/600A Current Digital Clamp Meter
Original price was: ₨4,500.00.₨3,249.00Current price is: ₨3,249.00. Quick View- Maximum DC/AC Current Measurement: 400A/500A/600A
- True/RMS measurement: Yes
- LowZ AC Voltage Measurement: Yes
- NCV Detection and AC Live Line Detection: Yes
- Auto power off and sleep: Yes
- Batteries: Not included (due to customs regulations)
-
GSCETE GT360D Digital Multimeter – Precision, Safety & Efficiency
Original price was: ₨3,800.00.₨2,599.00Current price is: ₨2,599.00. Quick View- DC Voltage: 200mV to 1000V
- AC Voltage: 200mV to 750V
- DC Current: 200μA to 10A
- AC Current: 200μA to 10A
- Resistance: 200Ω to 40MΩ
- Capacitance: 20nF to 200μF
- Frequency Measurement: 10Hz to 10MHz
- Temperature Measurement: -20°C to 1000°C (-4°F to 1832°F)
- Duty Cycle: 0.1% to 99.9%
-
GSCETE GT55 Digital Multimeter – Precision & Reliability for Every Task
Original price was: ₨6,900.00.₨3,999.00Current price is: ₨3,999.00. Quick View- DC Voltage: 200mV to 1000V
- AC Voltage: 200mV to 750V
- DC Current: 200μA to 10A
- AC Current: 200μA to 10A
- Resistance: 200Ω to 40MΩ
- Capacitance: 20nF to 200μF
- Frequency Measurement: 10Hz to 10MHz
- Temperature Measurement: -20°C to 1000°C (-4°F to 1832°F)
- Duty Cycle: 0.1% to 99.9%
-
GSCETE Multimeter GT350C – High-Precision Digital Multimeter
Original price was: ₨3,250.00.₨2,249.00Current price is: ₨2,249.00. Quick View- Display: Large backlit LCD
- Measurement Method: True RMS
- Auto/Manual Ranging: Yes
- Power Supply: 9V battery (included)
- Auto Power-Off: Yes
- Overload Protection: Yes
- Safety Rating: CAT III 600V / CAT II 1000V
- Build Quality: Shock-resistant, non-slip casing
-
GSCETE Multimeter GT350E – High-Precision Digital Multimeter
Original price was: ₨3,600.00.₨2,399.00Current price is: ₨2,399.00. Quick View- Display: Large backlit LCD with high visibility
- Measurement Method: True RMS
- Auto/Manual Ranging: Yes
- Power Supply: 9V battery (included)
- Auto Power-Off: Yes, to conserve battery life
- Overload Protection: Yes, for all ranges
- Safety Rating: CAT III 600V / CAT II 1000V
- Build Quality: Shock-resistant, non-slip casing
-
GT350D Professional Digital Multimeter
Original price was: ₨3,500.00.₨2,099.00Current price is: ₨2,099.00. Quick ViewThe GT350D Professional Digital Multimeter is a high-precision instrument designed to meet your diverse measurement needs. Whether you’re a professional, hobbyist, electronics enthusiast, or a DIY hobbyist, this multimeter is the perfect tool for you. It has a clear LCD display and a comfortable protective cover with test leads hanging grooves. It has 3. 2 meters drop test and precision protection. Its Loud buzzer sounds reasonable hearing capacity to the user.
-
GY-273 HMC5883L Triple-axis Magnetometer Compass Module
Original price was: ₨750.00.₨599.00Current price is: ₨599.00. Quick View- Type: GY-271
- Operating Voltage : 3 -5 V DC.
- Chipset: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
- Dimensions : 14.8 x 13.5 x 3.5 mm.
- Weight: 2 gm.
- 3-axis magnetic electronic compass.
- Precise heading information.
- Fits into small projects easily.
- I2C communication.
-
- Supply Voltage VCC: 3.3 to 6 V
- Heading Accuracy: 1 to 2
- Magnetic Field Range: -8 to +8 Gauss
- I2C Address: 0x1E (7-bit address)
- Max Data Rate: 160 Hz
- Digital Voltage Level: 3.3V
- Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
- Weight: 0.95g (0.034oz)
-
GY-291 ADXL345 3-Axis Accelerometer Module
Original price was: ₨590.00.₨349.00Current price is: ₨349.00. Quick View- Main Chip: ADXL345
- Model: GY-291
- Power Supply: 3-5V
- Means of Communication: IIC / SPI Communication Protocol
- Measuring Range: ±2g /±16g
- Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
- Accelerometer Normal Operating Current: 450µA
- Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
- Sleep Mode Current: 8µA
- Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
- User-Programmable Interrupts
- Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
-
GY-31 TCS230 TCS3200 Color Sensor
Original price was: ₨2,000.00.₨1,350.00Current price is: ₨1,350.00. Quick View- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
-
Gy-61 Triple Axis Accelerometer Adxl335
Original price was: ₨1,990.00.₨1,749.00Current price is: ₨1,749.00. Quick View- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high-current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C addresses for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Dimensions 20x16mm
- Designed for 5V logic level
-
GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Original price was: ₨490.00.₨399.00Current price is: ₨399.00. Quick ViewA 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
-
- Chip: MPU-6050
- Power supply: 3v-5V
- Gyroscope range: + 250 500 1000 2000/ s
- Acceleration range: 2 4 8 16 g
- Communication: Standard IIC communication agreement
- Chip built-in 16 bit AD converter, 16 bits of data output
- Pin Pitch 2.54 mm
- SIZE: 20.3mm x 15.6mm
-
Half Size Breadboard 400 Points For Electronics
Original price was: ₨250.00.₨179.00Current price is: ₨179.00. Quick ViewHalf Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
-
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40C to 85C.
- Turn on and Turn off time is 2 sec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.
-
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.
-
HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.
-
HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
Original price was: ₨1,350.00.₨819.00Current price is: ₨819.00. Quick View- Working frequency: 433.4MHz to 473.0MHz
- Supply voltage: 3.2V to 5.5VDC
- Communication distance: 1,000m in the open space
- Serial baud rate: 1.2Kbps to 115.2Kbps(default 9.6Kbps)
- Receiving sensitivity: -117dBm to -100dBm
- Transmit power: -1dBm to 20dBm
- Interface protocol: UART/TTL
- Operating temperature: -40℃ to +85℃
- Dimensions: 27.8mm x 14.4mm x 4mm
-
HC-SR501 PIR Human Motion Sensor
Original price was: ₨260.00.₨229.00Current price is: ₨229.00. Quick View- Wide range on input voltage varying from 4.V to 12V (+5V recommended)
- Output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operating modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
-
HCSR04 ultrasonic sensor Bracket
Original price was: ₨180.00.₨69.00Current price is: ₨69.00. Quick View- Thickness: 2.8 – 3.1 mm
- Inner diameter: 16 mm
- Fixing Hole Diameter: 3.8 mm
- Material: High Quality Imported Acrylic
- Colour: Blue
- Application: Stationary ultrasonic sensor modules and other products
-
HCSR501 HC-SR501 PIR Sensor
Original price was: ₨350.00.₨229.00Current price is: ₨229.00. Quick View- Use BISS0001 signal processing IC, sanyo genius regulator
- Voltage: 5V 20V
- Power Consumption: 65mA
- TTL output: 3.3V, 0V
- Delay time: adjustable (0.3 sec 10 minutes)
- Lock time: 0.2 sec
- Trigger methods: L disable repeat trigger, H enable repeat trigger
- Sensing range: less than 120 degree, within 7 meters
- Temperature: 15 ~ +70
- Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
-
- Length: 1.5 meter
- Input: HDMI (Type A male connector)
- Output: HDMI
-
Heart Rate Monitor ECG AD8232 Module + Leads
Original price was: ₨2,500.00.₨1,479.00Current price is: ₨1,479.00. Quick View- Supply voltage: DC 3.3V
- Output: Analog output
- Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
- Size 36mm * 31mm * 18mm
- Operating temperature: -40C +85 C
-
The HEF4104B is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high voltage circuits. For example low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high voltage LOCMOS. It has four data inputs (A0 to A3), an active HIGH output enable input (OE), four data outputs (B0 to B3) and their complements (B0 to B3).
-
Helicopter Coreless Micro DC Motor With Propeller
Original price was: ₨799.00.₨499.00Current price is: ₨499.00. Quick ViewCoreless motor with propeller for RC aeroplane and helicopter.
-
HER107 HER-107 high efficiency rectifier diode
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick ViewFEATURES
Low forward voltage drop
High current capability High reliability
High surge current capability
High speed switching -
Hi Flow Soldering Wire (100gm)
Original price was: ₨590.00.₨449.00Current price is: ₨449.00. Quick ViewSoldering wire is used for creating a robust connection between two wires or to join electronic components of all kinds to a printed circuit board. This soldering wire is of 100 gm.
-
Hi Flow Soldering Wire (50gm)
Original price was: ₨300.00.₨269.00Current price is: ₨269.00. Quick View- 100% Brand new and high quality
- Good solder-ability, insulation resistance, no spattering and non-corrosive Material: Metal
- Wire Diameter:Approx.0.8mm
- Flux 2.2%
- Tin 60%
-
HI-LINK 120VAC-220VAC 5VDC 3W Power Supply
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick View- Input voltage:90-240 VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Low power consumption, environmental protection, no-load loss <0.1W
- 100% load aging and testing
- Operation Temperature: -20 — +60
- Store Temperature: -40 — +80
- Relative humidity: 5 — 95 %
- Cooling way by radiation
- Atmospheric pressure: 80—106 Kpa
- Sea level elevation: 2000 m
- Rated input voltage: 100-240 VAC
- Input voltage range: 90-264 VAC
- Meets UL and CE requirements
- Ultra-thin and ultra-small
-
High Quality 12V 6A AC-DC Switching Power Supply Module Heavy Duty
Original price was: ₨2,850.00.₨999.00Current price is: ₨999.00. Quick View- Item Type: Switching Power Supply Module
- Material: Synthetic cardboard
- Usage: Used for AC to DC power module
- Power Supply Model: WX -DC2407p
- AC Input: AC100-240V
- Universal AC Frequency: 50HZ/60HZ
- Output Voltage: DC12V
- Output Current: 5-6.5A (without any voltage drop)
- Output Power: 180W (maximum 220W)
- Positioning Hole Size: Approx. 10.58 x 5.57cm / 4.2 x 2.2in
-
High Quality 3.7v 10000mah 1260110 Polymer Lithium Ion Li-ion Rechargeable Battery
Original price was: ₨1,850.00.₨1,399.00Current price is: ₨1,399.00. Quick View- Type: Lithium battery
- Capacity: 10000mAh
- Rechargeable: YES
- Charging Voltage: 4.2V
- Rated Voltage: 3.7V
- Working Temperature: -20°~50°
- Dimensions(L*W*H): About 110 x 60 x 12mm
-
High Quality 37 in 1 Sensor Module Board Set Kit For Arduino
Original price was: ₨4,500.00.₨2,599.00Current price is: ₨2,599.00. Quick ViewThis 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
-
High Quality 5in Diagonal Pliers Cable Wire cutter
Original price was: ₨600.00.₨499.00Current price is: ₨499.00. Quick View- The blade can cut effectively, suitable for various cables.
- Small body, easy to carry.
- Made of high quality steel, high hardness and durable to use.
- It can cut plastic without slip which can provide convenience and comfort.
- Comfortable ergonomics handle can reduce fatigue when using.
-
High Quality Power Supply Adapter 5V DC 2Amp
Original price was: ₨350.00.₨259.00Current price is: ₨259.00. Quick View- Simple to use, just plug-in, charge up and play.
- Short circuit, over-voltage and over-current protection.
- Incredibly low fault rates this power supply is a regulated center positive power supply.
- High quality graded AC to DC power adapter.
- Light in weight and with heavy-duty cable-wire.
- Compatible with Dth, STB, CCTV, toys, broadband, laptop, DVD, tablet, TV tuner card, cordless phones, LCD monitor, scanner, cell phone, printers
-
High Quality Super Strong Permanent Bar Shaped Magnet
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick ViewNdFeB magnet is an alloy magnet made from Nd,Fe,B and other metal elements,which has the high remanence,high coercive force,high energy and high performance/cost ratio.The highest magnetic properties is from 33MGOe to 52MGOe,and we are able to control the magnetic properties within the range as you demanded,like SH,UH,EH such high stable properties could be produced as per your industrial application.
-
Horizontal Float Switch (White)
Original price was: ₨990.00.₨792.00Current price is: ₨792.00. Quick View- Switch Closed in Horizontal Position and Open When Vertical
- Corrosion Resistant Polypropylene Construction
- M12 Thread Size for Screw Fixing Internally
- Contact Rating: 220VAC @ 1A
- DC Contact Rating: 24Vdc @ 0.25A
- Temperature Rating: -30C to 100C
- Suitable for Water Tanks and Water Treatment Systems
-
Horizontal Float Switch Black
Original price was: ₨470.00.₨349.00Current price is: ₨349.00. Quick View- Material: plastic
- Color: black
- Switch power(Max): 10W
- Switching voltage(Max):AC 100V
- Switching current(Max):AC 0.5A
- Electric strength: AC1500V/Imin
- Contract resistance: 200 milli-ohm
- Temperature rating:-20 ~ +80
- Cable length: About 400 mm / 15.76″
- Float length: 85 mm / 3.35″
-
Hot End For 3D Printer
Original price was: ₨3,000.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Model: J-Head Hot End V6
- Design: Long-Distance
- Improved processing of flexible filament
- More compact design
- Easier maintenance
- Reduced heating
- Improved temperature control and cooling
- Material: aluminum
- Nozzle: 0.4 mm
- Filament: 1.75 mm
- 12V 40W heating cartridge
- NTC thermistor 100k
- Cable length: approx. 90 cm
-
- Strong Adhesive Glue Sticks
- Paintless Dent Repair Tool Glue Sticks for Hot Glue Gun
- APPLICATIONS – Gluing plastic, metal, wood, fabric, ceramics, and cartons.
-
- HP2730 Opto Coupler IC
- Number of Channels: 2
- Voltage – Isolation: 2500 Vrms
- Current Transfer Ratio (Min): 300% @ 1.6 mA
- Turn On / Turn Off Time (Typ): 300 ns, 5 s
- Input Type: DC
- Output Type: Darlington
- Voltage – Output (Max): 7 V
- Current – Output / Channel: 60 mA
- Voltage – Forward (Vf) (Typ): 1.3 V
- Current – DC Forward (If) (Max): 20 mA
- Operating Temperature: -40C to 85C
- Mounting Type: Through Hole
- Package: 8-DIP (0.300″, 7.62mm)
-
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of 8 address bits and 4 data bits. Each address and data input is externally programmable or fed in using switches. The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. These ICs are paired with each other. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address and data, transmitted by a carrier using an RF transmission medium and gives output to the output pins after processing the data. These Ics have operating Voltage : 2.4V ~ 12V. They have Low Power and High Noise Immunity.
-
HTC-1 Electronic Temperature Humidity Meter
Original price was: ₨895.00.₨499.00Current price is: ₨499.00. Quick View- Large LCD display, multi-function.
- Indoor & outdoor temperature display, indoor humidity display, and time display.
- A memory of MAX & MIN measuring value.
- 12-hour / 24-hour displaying system selectable.
- degree C& F unit selectable.
- Clock, Date & Calendar function (month and date).
- Everyday alarm function.
- Desktop placing or Wall Hanging.
- Low power consumption.
- High stability & accuracy.
-
HTC2 Digital Thermometer And Hygrometer HTC 2
Original price was: ₨900.00.₨649.00Current price is: ₨649.00. Quick ViewThe main
Weather station type
home weather stationIndoor temperature measurement
YesOutdoor temperature measurement
YesIndoor humidity measurement
YesExternal sensor
wiredThe country of manufacture
Chinacondition
NewA type
DigitalOperating principle
Electronicunit of measurement
C / F -
Humidity and Temperature Sensor DHT22
Original price was: ₨899.00.₨659.00Current price is: ₨659.00. Quick View- Calibrated and doesn’t require extra components
- Input: 3.3-6V
- Measuring current: 1-1.5mA
- Standby current: 40-50uA
- Humidity: 0-100% RH
- Temperature: -40º to 80ºC (+-0.5ºC)
- RH accuracy: +-2%
-
HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
Original price was: ₨1,200.00.₨549.00Current price is: ₨549.00. Quick View- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Emission mode current(peak): 115mA.
- Receive Mode Current(peak): 45mA.
- Power-down mode current: 4.2uA.
- Sensitivity 2Mbps mode in received: -92dBm.
- Sensitivity 1Mbps mode in received: -95dBm.
- PA gain: 20DbLNA gain: 10Db.
- Sensitivity 250kbps mode in received: -104dBm.
- Operating Range: 1 km
- LNA Noise figure: 2.6 Db.
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Interface: SPI.
-
HW-370 TP5100 2A Li-Ion Battery Charger Module
Original price was: ₨500.00.₨159.00Current price is: ₨159.00. Quick View- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100>#/li###
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, under-voltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
-
HW632 HW-M632 XH-M603 CHARGING CONTROL MODULE
Original price was: ₨1,050.00.₨749.00Current price is: ₨749.00. Quick View- Model: HW632
- Input Voltage: DC 10-30V
- Display Precision: 0.1V
- Control Precision: 0.1V
- Output Type: direct output
- Voltage Tolerance: +/-0.1V
- Application Fields: 12-24V storage battery
- Size: 82*58*18mm
-
HX711 Module Load Cell Voltage Amplifier
Original price was: ₨160.00.₨149.00Current price is: ₨149.00. Quick ViewThe HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell with some calibration. You?ll be able to get very accurate weight measurements.
-
This is a IC Socket/Base for 28 pin SMD PLCC IC. This is a SMT base and is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC’s.
-
-
- Guaranteed zero reading for 0 V input on all scales
- True polarity at zero for precise null detection
- 1pA typical input current
- True differential input and reference, direct display drive – LED lCL7107
- Low noise – less than 15 VP-P
- On-chip clock and reference
- Low power dissipation – typically less than 10mW
- No additional active circuits required
- Enhanced display stability
- Pb-free (RoHS compliant)
-
IMAX B3 AC Compact Balance Charger
Original price was: ₨1,899.00.₨1,399.00Current price is: ₨1,399.00. Quick ViewImax RC B3 Compact Charger SPECIFICATION:
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery

































































































































































