-
- Brand: Generic
- Inductance: 10 uH
- Size: 6 x 8 mm (Diameter x Height)
- Pin length: 14 mm
- Lead Diameter: 0.6 mm
- Rated current: 1A
- Tolerance: 10 %
- Turns: 18.5 TS
-
A?relay?is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current.
-
High quality heating element for your soldering iron.
-
- Product Name: LED Digital Display Tube
- Type: Common Cathode
- Model: 50AH
- Common Cathode : 3-8
- Digital Display: 1 Digit
- Digital Number: 1 Bit Segment
- Emitted Color: Red
- Pin Number: 10
- Continuous Forward Current: 20mA
- Average Forward Voltage: 2V
- Power Consumption : 3mW
- Luminous Intensity: mcd
- Number Height : 0.5 inch
- Panel Size : 19 x 12. x 8mm / 0.5 x 0.5 x 0.31 inch (L*W*H)
- Total Size : 19 x 12. x mm / 0.5 x 0.5 x 0.55 inch (L*W*H)
- Material : Plastic, Metal
- Color : Black, White
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
xl6009 4A DC/DC Step-Up Boost Converter
Original price was: ₨350.00.₨239.00Current price is: ₨239.00. Quick View- Input voltage: 3 – 32V
- Output voltage: 5 – 35V (adjustable)
- Output current: Maximum output current 4A
- Note: The higher the voltage, the load current increases.
- Efficiency of this regulator upto <94%
- Load regulation: 0.5%
- Voltage regulation: 0.5%
- Adjustable potentiometer onboard for output voltage adjustment.
- Non – isolated constant voltage module.
- Non – synchronous rectification.
- Short circuit proportion: current limiting since the recovery.
- Dimension: 45*20*14 mm (L*W*H)
-
Light Sensitive LDR Relay Module 12V
Original price was: ₨600.00.₨469.00Current price is: ₨469.00. Quick View- Automatically controls the relay based on light intensity
- Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
- Adjustable light level set-point
- Controls loads of 115/230VAC @ 10A
- Controls loads of 0 15VDC @ 10A
- Both NO (Normally Open) and NC (Normally Closed) contacts
- LED indicator when the relay is energized
- 12V power operation
-
- 9V Positive Voltage Regulator
- Minimum Input Voltage is 11V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- PSRR / Ripple Rejection: 55 dB
- Output Type: Fixed
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
Original price was: ₨1,200.00.₨549.00Current price is: ₨549.00. Quick View- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Emission mode current(peak): 115mA.
- Receive Mode Current(peak): 45mA.
- Power-down mode current: 4.2uA.
- Sensitivity 2Mbps mode in received: -92dBm.
- Sensitivity 1Mbps mode in received: -95dBm.
- PA gain: 20DbLNA gain: 10Db.
- Sensitivity 250kbps mode in received: -104dBm.
- Operating Range: 1 km
- LNA Noise figure: 2.6 Db.
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Interface: SPI.
-
GSCETE GT360D Digital Multimeter – Precision, Safety & Efficiency
Original price was: ₨3,800.00.₨2,599.00Current price is: ₨2,599.00. Quick View- DC Voltage: 200mV to 1000V
- AC Voltage: 200mV to 750V
- DC Current: 200μA to 10A
- AC Current: 200μA to 10A
- Resistance: 200Ω to 40MΩ
- Capacitance: 20nF to 200μF
- Frequency Measurement: 10Hz to 10MHz
- Temperature Measurement: -20°C to 1000°C (-4°F to 1832°F)
- Duty Cycle: 0.1% to 99.9%
-
35W LED Chip with Capacitor Driver AC 220V input – Light Colour White High Quality
Original price was: ₨500.00.₨250.00Current price is: ₨250.00. Quick View- Power Output: 35 Watts
- Input Voltage: AC 220V
- Light Color: White
- Technology: LED Chip with Capacitor Driver
- Efficiency: High luminous efficacy for optimal brightness
- Quality: Manufactured using high-quality materials for longevity and reliability
- Installation: Easy installation with integrated capacitor driver
- Applications: Versatile usage suitable for indoor and outdoor lighting projects
- Compatibility: Works seamlessly with AC 220V input, ensuring hassle-free operation
- Durability: Built to withstand frequent use and various environmental conditions
- Safety: Designed with safety features to prevent overheating and electrical hazards
- Versatility: Suitable for residential, commercial, and industrial lighting applications
- Energy-efficient: Consumes less power compared to traditional lighting solutions, helping reduce energy costs and environmental impact
- Certifications: Compliant with relevant safety and quality standards, ensuring peace of mind for users.
-
30 Watt 220V or 12V DOB(Direct On Board) LED Bulb Raw Material WHITE Color Light Electronic Hobby Kit
Original price was: ₨250.00.₨219.00Current price is: ₨219.00. Quick View- Power Output: 30 Watts
- Input Voltage: 220V AC or 12V DC
- Light Color: White
- Technology: Direct On Board (DOB) LED
- Efficiency: High luminous efficacy for optimal brightness
- Assembly: DIY assembly required
- Components: Includes all necessary electronic components for assembly
- Instructions: Comprehensive assembly instructions included
- Usage: Suitable for electronic hobbyists, DIY enthusiasts, students, and professionals
- Applications: Ideal for workshops, projects, showcases, and various lighting applications
- Versatility: Can be customized and adapted for different setups and configurations
- Ease of Use: User-friendly design for easy assembly and installation
- Quality: High-quality materials ensure durability and reliability
- Safety: Designed with safety in mind, adhering to relevant electrical standards and regulations
-
HW-370 TP5100 2A Li-Ion Battery Charger Module
Original price was: ₨500.00.₨159.00Current price is: ₨159.00. Quick View- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100>#/li###
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, under-voltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
-
Buy best quality DC Motor at the minimal rates from ElectroNation.
775 motor, with metal rollers in the front, trailed by a copper coat
Shaft length: 17mm;
Shaft distance across: 5mm
Body Diameter: 42mm; Body Length: 66.7mm
Mounting Hole Size: M4;
Mounting Hole: 2 -
12V 7AMP Lead Acid Battery
Original price was: ₨3,600.00.₨3,099.00Current price is: ₨3,099.00. Quick View- Toy Battery Cars and Bikes are the most popular applications.
- Battery Type – 12V 7 Amp lead-acid battery
- Usage – Home, bike and toy car
- Capacity (Ah) – 7000 Ah
-
ULN2004 Features
- Output current (single output): 500mA (MAX.)
- High sustaining voltage output: 50V (MIN.)
- Output clamp diodes
- Inputs compatible with various types of logic
-
- Square Posts.
- Stackable – End to End and Side to side.
- Can manually broke for length
- Standoffs allow cleaning of solder contaminants.
- Connector: Pin Header
- Connector type: Pin Strips Male
- Number of pins: 80(2×40)
- Row: 2
- High durability and reliability.
- Industrial finish.
- Dimensionally Accurate.
- Corrosion Resistant.
- Less Maintenance requires.
- Standard Construction.
-
- Size 12Inch
- Type: self-locking nylon cable tie
- Material: Nylon66 Cable Tie
- Feature: Heat resistant, erosion control, insulate well.
- Operation Temperature: -40 c to 85c
- Colour: Natural (white or standard colour), UV black.
- Package: Polybag + Label (100pcs/bag)
- To keep all wires in place this product is what u are waiting for.
-
- Internally frequency compensated for unity gain
- Large DC voltage gain 100 dB
- Wide bandwidth (unity gain) 1 MHz (temperature compensated)
- Very low supply current drain (700 A) essentially independent of supply voltage
- Low input biasing current 45 nA (temperature compensated)
- Low input offset voltage 2 mV and offset current: 5 nA
- Input common-mode voltage range includes ground
-
LR-41 Alkaline Battery Button Cell (1.5V)
Original price was: ₨60.00.₨49.00Current price is: ₨49.00. Quick View- Great value of alkaline batteries
- Steady electric current
- High Efficient Energy & Continuous Voltage Supply
- High capacity batteries
- Excellent voltage stability
- Long shelf life and great leakage resistance
- Good for all electronics and watches
-
- Inverting IC that can convert High logic level to Low level
- High source and Sink Current as it has the capability of driving 2 TTL Loads at 5V over full temperature range.
- 100% Tested for Quiescent Current at 20 V
- Maximum Input Current of 1A at 18 V Over Full Package Temperature Range; 100 nA at 18 V and 25C
- 5-V, 10-V, and 15-V Parametric Ratings
- It is available in 16 pin packages of PDIP, SOIC, TSSOP, SO.
- Special input protection to protect inputs against static discharges.
-
- Wide supply voltage range: 3V to 15V
- Low power: 100 nW (typ.)
- High noise immunity: 0.45 VDD (typ.)
- Separate SET and RESET inputs for each latch
- NOR and NAND configuration
- 3-STATE output with common output enable
-
- Wide supply voltage range 3.0V to 15V
- Low power 10 nW (typ.)
- High noise immunity 0.45 VDD (typ.)
- Buffered Inputs and Outputs
- Standard Symmetrical Output Characteristics
- 100% Tested for Maximum Quiescent Current at 20V
- 5V, 10V and 15V Parametric Ratings
- Maximum Input Current of 1A at 18V Over Full Package-Temperature Range; 100nA at 18V and +25oC
-
- Dual inputQuad NAND gate operation.
- Input voltage range: -0.5 to VDD +5V
- Power dissipation of 100mW per logic change.
- It is available in different outline packages
- The propagation delay time is 60ns
- All input and output pins are buffered for high throughput
- The output characteristics are standardized symmetric
- CD4011 draws a maximum input current of 1 Ampere at 18 volts
- Offers different noise margin level according to the input voltage level
- Temperature operating range is -55C to +125C
-
The CD4081 quad gate is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors. They have equal source and sink current capabilities and conform to standard B series output drive. The devices also have buffered outputs which improve transfer characteristics by providing very high gain. All inputs protected against static discharge with diodes to VDD and VSS.
-
- Dynamic dV/dt rating
- Repetitive avalanche rated
- Fast switching
- Ease of paralleling
- Simple drive requirements
-
1.3 inch OLED Display 128X64 SSD1306 I2C SH1106
Original price was: ₨1,100.00.₨799.00Current price is: ₨799.00. Quick View- Resolution: 128 X 64 pixels
- Display color: Blue text on black background
- Interface: I2C
- Operating voltage: 3.3V – 5V
- Power consumption: 10-30mA
- Dimensions: 27mm x 27mm x 4.1mm
-
A Pair of Yellow Rubber Tire Wheel for Robots
Original price was: ₨200.00.₨179.00Current price is: ₨179.00. Quick View- Material: ABS Plastic
- Color: Rim-Yellow; Tire-Black
- Internal Axle Diameter: 3.7mm x 5.3mm
- Dimension: 66 x 27mm
- Quantity: 2 wheels
-
- Output controllable: Digital
- Compatible: With any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage: 250VAC/30VDC
- Max. switching current: 10A
- Size: 76mm x 56mm x 17mm
-
- Technology Family: CD4000
- VCC (Min) (V): 3
- VCC (Max) (V): 18
- Channels (#): 4
- Inputs per channel: 2
- IOL (Max) (mA): 6.8
- IOH (Max) (mA): -6.8
- Input type Standard: CMOS
- Output type: Push-Pull
- 5V–10V–15V parametric ratings
- Symmetrical output characteristics
- Speed: (tpd > 50ns)
- Data rate (Max) (Mbps): 8
- Rating: Catalog
- Operating temperature range (C): -55 to 125
-
- Small Signal NPN Transistor
- Current Gain (hFE): 450 (maximum)
- Continuous Collector current (IC) is 100mA
- Collector-Emitter voltage (VCEO) is 45V
- Collector-Base voltage (VCB0) is 50V
- Emitter Base Voltage (VBE0) is 6V
- Available in To-18 Metal can Package
-
The voltage regulator IC maintains the output voltage at a constant value. 7805 provides +5V regulated power supply. Input voltage range 7V- 35V Current rating Ic = 1A Output voltage range VMax=5.2V ,VMin=4.8V.
-
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output
-
Specification
- Origin: China
- Type: DIAC
Package Type: Through Hole - Package: DO-35
- Breakover Voltage: 28v to 36v
- Typical Breakover voltage: 32v
- Output voltage: 5v
- Breakover current: 50µA
- Leakage current: 10µA
- Peak current: 0.30A
- Rise time: 2µs
- Operating junction temperature: -40℃ to +125℃
- Storage temperature range: -40°c – +125°c
-
- Type: USB to Serial RS232 Pro Converter DB-9 Adapter Cable
- Connector: USB Type A to DB-9 (RS232)
- Chipset: Built-in FTDI chipset for reliable performance
- Compatibility: Compatible with Windows 10/8.1/8/7/Vista/XP, Mac OS, Linux
- Baud Rate: Supports up to 921.6 Kbps
-
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
-
PWM 40A DC Motor Speed Controller Module
Original price was: ₨3,200.00.₨1,499.00Current price is: ₨1,499.00. Quick ViewThis 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET connected to the individual heatsinks.Features: DC Motor Speed Controller Module with PWM 40 A
- Industrial Quality Board.
- Maximum Output Current of 40A.
- Maximum Output Power of 2000W
- Working Voltage From 9V to 50V.
-
4v Battery 600mAh 0.6A Lead Acid Rechargeable
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick View- Sealed construction, safety, and no leakage
- Maintenance-free, convenient for installation
- Broad operating temperature range
- High capability, high energy density
- Low self-discharge rate, more deep cycle times
- Long service life, Excellent recharge, and discharge performance
-
HTC-1 Electronic Temperature Humidity Meter
Original price was: ₨895.00.₨499.00Current price is: ₨499.00. Quick View- Large LCD display, multi-function.
- Indoor & outdoor temperature display, indoor humidity display, and time display.
- A memory of MAX & MIN measuring value.
- 12-hour / 24-hour displaying system selectable.
- degree C& F unit selectable.
- Clock, Date & Calendar function (month and date).
- Everyday alarm function.
- Desktop placing or Wall Hanging.
- Low power consumption.
- High stability & accuracy.
-
- Drive Type: Piezo Discs
- Resonant frequency(kHz): 3.0~5.0+/- 0.5 KHz
- Resonant impedance (ohms): 300 max
- Diameter: 10mm/ 0.39 inches
- Thickness: 0.3mm/ 0.01 inches
- Wire Length: 40mm/ 1.57 Inches
- Material: Brass
- Color: As shown
-
- Rated Power:100W
- Rated Voltage:220V AC/DC
- consistance temperature: 200±10°C
- Size: 11.3 x 3.5cm
- heat material: PTC Thermistor
- heat methods: heat radiation by air flow
- lead wire: silicone high temperature line
- Suitable For: small instrument, small box body temperature heating space environment, incubator.
-
200W Ceramic Heater Heat Emitter Lamp Incubator
Original price was: ₨799.00.₨549.00Current price is: ₨549.00. Quick ViewThis 200w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
-
This battery is genuinely the most recent in battery-powered innovation. It is incredibly meager, light, and very dainty contrasted with any battery-powered science. Low weight, little size yet enormous limit. The other benefit of lithium polymer innovation is extremely low self-release.
-
- RoHs Certification
- Battery Model: 18650
- Cell number: 3
- Output Voltage: 11.1 V
- Plug form: DC 2.1 (outer diameter 5.5, inner diameter 2.1)
- Size: 78.24mm x 59.46mm x 21.41mm/ 3.08 x 2.34 x 0.84 inches
- Weight: 30 g
-
Features:
- Connector plug
- Connector type Jack 3,5mm
- Connector type male
- Spatial orientation straight
- Mechanical mounting for cable
- Electrical mounting soldering
- Contact plating nickel plated
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.











































































