-
-19%
LED SMD 5m Strips Blue color:
*Easy to Use:
Self-glue back with tape for protected and simple application.
* Cuttable and attachable:
Each 3 LEDs along the cut imprints and, without harming the rest strips.
* Flexible:
Slight and, conservative and adaptable PCB strip.
* Eco-friendly:
Low power utilization and, very brilliant however having in low temperature.
-
Buy low price, high quality wire cutter.
-
- High Quality 3.3uH Inductor
- High Current and Self-Resonant Frequency
- Epoxy Coated with Color Band Identifier
- Operating Temperature: -25°C to 85°C
- Tolerance: ±5%
-
Hot-21%
Arduino Pro Mini 5V 16Mhz ATMEGA328
Original price was: ₨1,399.00.₨1,099.00Current price is: ₨1,099.00. Quick View- 131 Powerful Instructions – Most Single Clock Cycle Execution
- Up to 20 MIPS Throughput at 20 MHz
- Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
- Real Time Counter with Separate Oscillator
- Six PWM Channels
- 8-channel 10-bit ADC in TQFP and QFN/MLF package
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
- 23 Programmable I/O Lines
-
-10%
A3967 Stepper Motor Driver Module
Original price was: ₨400.00.₨360.00Current price is: ₨360.00. Quick ViewThis EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.
-
-19%
Perfect heating element for your soldering iron.
-
A DC jack is an electrical connector for supplying direct current power.
-
- Adopt 0.36 inch 2-digit common anode Nixie tube
- Adopt low-level signal control for Nixie tube segment / bit-choice
- Connect VCC to the power supply, GND to ground, segment terminal a, b, c, d, e, f, d, up to single-chip I/O port.
- Notice: Forbid connect segment terminal to ground, otherwise, the Nixie tube segment terminal will be destroyed;
- Connect a bit-choice terminal to C1 and connect C2 to a single-chip I/O port
- With LED indicator, it will be turned on when powered on
-
This NPN Bipolar Darlington Transistor is designed for use in switching applications, such as print hammer, relay, solenoid and lamp drivers.
-
This IC is a 16-Bit SPI I/O Expander with Serial Interface. This IC has 25mA sink/source capability per I/O.
-
A type of fastener, for holding items together, primarily electrical cables or wires. This is 12″ long in length.
-
-12%
A type of fastener, for holding items together, primarily electrical cables or wires. This is 4″ long in length.
-
A soldering iron is a hand tool used in soldering. The power rating of this soldering iron is 30W.
Features:
- Soldering iron with 30W power and replaceable tip
- Simple soldering of printed circuit boards/components, using the de-soldering suction pump
Convenient storage when not in use - Power supply: 220 to 240V (don’t support 110V)
- RoHS and CE Approved
-
-34%
DS18B20 Temperature Sensor (Probe Type)
Original price was: ₨500.00.₨329.00Current price is: ₨329.00. Quick View- Usable temperature range: -55 to 125C (-67F to +257F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into chip
- Multiple sensors can share one pin
- 0.5C Accuracy from -10C to +85C
- Temperature-limit alarm system
- Query time is less than 750ms
- Usable with 3.0V to 5.5V power/data
-
-20%
8 Position Dip Switch provides eight independent ON/OFF slide switches in a small package. DIP switch versions are available in a broad range of low-profile, half-pitch (.05 inch), standard-pitch (.1 inch), through-hole, and surface mount options. Our unique design and construction allow for superior Electrostatic Discharge (ESD) protection.
We offer top, right angle, or side actuation styles; select styles are available with a choice of gold-plated or economical tin-plated contacts. Custom marking is also available. Our DIP switch product line includes SPST, SPDT, DPST, and 3PST circuit switching options. Optional bottom epoxy seals and removable top tape seals on the side of the actuator protect the switches during soldering and board washing.
-
-21%
Meanwell Switching Power Supply 24V-5A
Original price was: ₨3,799.00.₨2,999.00Current price is: ₨2,999.00. Quick View- DC-output: 24V, DC, adjustable via potentiometer, range 20V – 28V
- DC-current continuous max.: 5A
- Max. power : 120W
- Required min-load: 0A
- Ripple max.: 150mVpp
- Efficiency: typical 87%
- Working temperature: -20 to +70°C
- AC-input range: 88 – 264V AC or 124 – 370V DC
- Connector: screw-terminal, M4
- Weight: 0.5kg measure
- Dimensions LxWxH: mm
-
-17%
Mini Magnifying Glass with Illuminant
Original price was: ₨360.00.₨299.00Current price is: ₨299.00. Quick View- Material: Plastic
- Color: BLUE
- Bulb: 1 LED bulb with white light and the LED has a long life
- Runtime: It can reach a max of 200 hours with only double lithium batteries(CR2016)or one(2023)
- Operate Voltage: 3V
- Operate current: 300mA
- Size: 60(L) x 30(W) mm
-
-56%
Screwdriver Shovel STANLEY 60004S
Original price was: ₨500.00.₨220.00Current price is: ₨220.00. Quick View‘-Basic screwdriver 4-inch flat tip / Basic screwdriver Standard tip
-Handles with 4 ergonomic lobes for greater torque and comfort.
-Colored handles to identify tips: flat red, cross blue, Torx green.
-Heat-treated steel bars for longer life.
-Nickel-plated bars resistant to rust.
-Reinforced anti-slip toe.
-Tip 1/4 (6.5 mm) -Bar Length
4 inches (101 mm) -
-21%
- Contact cleaner improves electrical conductivity and reduces friction and wear.
- The cleaner is moisture, rust, and corrosion-proof.
- Can be used for domestic appliances, garden equipment, car locks, car-lamp holders, plugs, and zippers, hinges, locks, and curtain rails in the house. It is also ideal for bicycle chains and gears and can be used safely on metal, plastic, paint, and rubber.
- This spray does not contain silicones.
- Remove dirt.
- Apply a final coating to moisture, rust, and corrosion-proof the parts, when using the cleaner on switches, cable shoes, plugs, and connectors, move the contacts after applying the final coating.
- Do not use adhesives.
-
-26%
Camera Module 5MP Pi3 Model B Rev 1.3 with Cable
Original price was: ₨1,250.00.₨919.00Current price is: ₨919.00. Quick View- Lens: 1/4 5M
- Aperture: 2.9
- Focal Length: 3.29
- FOV: 72.4 degrees
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight: 5 gm
-
-36%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-15%
The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.
-
-6%
- Supply Voltage : 12 V
- Fused at 5A for additional safety and component protection
- Heated bed control with additional 11A fuse
- Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
- I2C and SPI pins left available for future expansion.
- 2 stepper motor for Z axis in parallel.
-
-25%
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
-
-4%
Temperature Sensor Module DS18B20
Original price was: ₨290.00.₨279.00Current price is: ₨279.00. Quick View- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55C to +125C, be accurate to 0.5C.
-
-11%
- Rated Load: 10Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
- Output Impedance: 1000±10% Ω
- Maximum working voltage: 15V DC
- Operating temperature range: -20~60°C
- Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L X W X H)
-
-34%
Veroboard Vero Board Single Side Large Breadboard Style
Original price was: ₨300.00.₨199.00Current price is: ₨199.00. Quick ViewProject Board / Vero board / prototyping board Size = 14.5cm x 6.5cm
we can use for any electronics projects.
-
-14%
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
-18%
- Identical in Function to the 74LS93 with Different Pin Arrangement
- Contains Four Master-Slave Flips-Flops together with a Binary Counter
- Gated Zero Reset
- Fast Propagation Speeds
- Low Power Dissipation
-
-20%
- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
-
-20%
BMP180/GY68 Pressure Sensor
Original price was: ₨300.00.₨239.00Current price is: ₨239.00. Quick View- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
- Size: 13mm x 10mm
-
-41%
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
-5%
Pulse Sensor Heart Rate Sensor
Original price was: ₨450.00.₨429.00Current price is: ₨429.00. Quick View- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625
- Thickness: 0.125 Thick
-
-33%
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00. Quick ViewProximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
-
-25%
This is the SMD RGB LED Common Cathode Module, These module has 3 separate LEDs the Red, Green and Blue which can be individually driven by applying a voltage to the appropriate module pin this example code is uses the Arduino analogWrite(PWM) function to cycle through the full possible output colors this smd led module is capable of producing a rainbow color scheme.
-
-7%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
-
-27%
Out Of Stock800mAh rating high discharge LiPo battery
-
-15%
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm -
-13%
Out Of Stock- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted
- Good consistency for voltage and power measurement
- Active output single-phase AC voltage sensor module
- High galvanic isolation
- Wide Range
- High accuracy
-
-30%
Out Of StockUSB Security Tester LCD Display
Original price was: ₨1,000.00.₨699.00Current price is: ₨699.00. Quick ViewUSB tester is a unique product which can be used to test the voltage and current levels of a system or a USB based circuit.
-
-20%
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
-
-38%
12V DC Electric Door Lock Fingerprint Door Lock
Original price was: ₨2,000.00.₨1,250.00Current price is: ₨1,250.00. Quick View- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current through the silicon, the electromagnetic lock will achieve a strong.
-
- Bi-Polar PNP Transistor
- Continuous Collector current (IC) is -1.5A
- Collector-Emitter voltage (VCE) is- 80 V
- Collector-Base voltage (VCB) is- 80V
- Base Current (Ib) is -0.5A
- Emitter Base Breakdown Voltage (VBE) is -5V
- DC current gain (hfe) is 40 to 160
- Available in To-225 and SOT-32 Package
- Collector Dissipation: 12.5 W
- Operating Junction Temperature Max (Tj): 150°C
-
- Operates from single 5V supply
- Input current: 150 nA max. over temperature
- Offset current: 20 nA max. over temperature
- Differential input voltage range: 30V
- Power consumption: 135 mW at 15V
- Available in Q-Temp Automotive
- High-Reliability Automotive Applications
- Configuration Control and Print Support
- Qualification to Automotive Standards
-
-21%
SCR C106 C106 Series – SCR TO-255AA 4A
Original price was: ₨75.00.₨59.00Current price is: ₨59.00. Quick View- Glassivated Surface for Reliability and Uniformity
- Power Rated at Economical Prices
- Practical Level Triggering and Holding Characteristics
- Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability
- Sensitive Gate Triggering
- Device Marking: Device Type, e.g., C106B, Date Cod
-
-19%
- Model Number: SRD-06VDC-SL-C
- Coil Power : 6V DC
- Pin Out: 5 Pin – Coil – COM – NC – NO
- Nominal Coil Power: 0.36w, 0.45W
- Contact Capacity: 10A 250VAC/10A 125VAC 10A 30VDC/10A 28VDC
- Insulation Resistance: 100M.500VDC
- Operate Time: 15ms/10ms
- Terminal Type: PCB
- Contact Load: High Power
- Product name:: 6V DC Electrical Relay SRD-05VDC-SL-C
- Contact Ratings: 1A,1C
- Contact Resistance: 100m (at 10A 5VDC)
- Contact Material: Silver Alloy
- Size: Miniature
- Protect Feature: Sealed
-
-28%
Power Module for APM 2.8 and quadcopters
Original price was: ₨2,500.00.₨1,799.00Current price is: ₨1,799.00. Quick ViewPower Module for APM 2.8 and quadcopters is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft’s own ESC/BEC for that.
-
-26%
IMAX B3 AC Compact Balance Charger
Original price was: ₨1,899.00.₨1,399.00Current price is: ₨1,399.00. Quick ViewImax RC B3 Compact Charger SPECIFICATION:
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery