-
-17%
Out Of StockXBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
Original price was: ₨6,000.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewThis is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way. -
-27%
Out Of StockThe Magician Chassis is our latest robot platform. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller.
-
-35%
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
-
-10%
- 5 X Multifunctional bracket
- 4 X Long U shape bracket
- 1 X L shape bracket
- 4 X Cup bearing
- 1 X Alloy mechanical claw
- 3 X U beam bracket
- 6 X 25T Plastic Servo Arm plate
- 6 X MG946R MG946 R 180 Degree Metal Gear Servo Motor
- 1 X Screw nuts
-
Out Of StockThis is the Standard Gripper Kit B, a simple and durable robotics kit that is great for getting a grip on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6″ wide max, has an overall body length of 5″ long with a 1.3″ wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.
-
-19%
his 6DOF Biped robot is a professional small humanoid robot consist of full aluminium parts, special non-ferrous oxidation process on surface, smooth edges not hurting hands, the metal is unbleached, beautiful and durable, prevent decoloring for long time using.
The robot you can mount six micro servos, each foot is 3DOF, the robot can both walk forward or backward and crouch, stand up, turn, even can do a lot of forward roll and backward roll.The kit includes six TowerPro MG995 servos.
-
Out Of Stock1. multi-function servo bracket x 16
2. long U-shaped bracket x4
3. short U-shaped bracket x 7
4. oblique U bracket x 4
5. L bracket x 4
6. big feet x 2
7. U-beam x 1
8. cup bearings x 14
9. a word board x 4
-
-37%
Out Of StockRobotic Metallic Claw
Original price was: ₨1,899.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThe Kit comes with hardware, un-assemble
Clamp Max open is 55mm
Clamp total length:108mm
Clamp total width:98mm (when the Clamp open)
The plank kit is very light
Compatible with MG995 and SG90 servo motor -
-14%
Features:
– Simple mechanical structure, easy for installation.
– Adopts 4 decelerate DC motors, ensuring flexbility and good direction.
– Large and stable Chassis, easy for expansion.
– speed test encoding disk.
– recommend use L293D 4 motors driver board and 4 Channel Infrared Detector Tracked Photoelectricity Sensor Obstacle Avoidance -
Out Of StockSpecification:
- Minimum Capacity: 1000mAh
- Battery Voltage: 11.1V / 3Cell
- Constant Discharge: 25C (25Amps)
- Peak Discharge (10sec): 35C (66Amps)
- Pack Weight: 141g
- Pack Size: 78 X 33 X 19mm
- Charge Plug: JST-XH
Weight
:
<b>141 GRM
-
Out Of StockBattery item: LION Power 7.4V 90M 25C
Capacity:900mAh
Continuous discharge rate:25C
Size: Length 57mm x Width 30mm x Height 14mm
Plug style: Blance charger,T Plug
Colors: Standard Colors -
Out Of StockThe QQ Super Multi-rotor flight control is built-in precise digital gyroscope and acceleration sensor with self-stabilizing function and super stable flight performance. Besides all standard PCM and 2.4G digital receiver, It also compatiblr with S.BUS DSM2 and DSMX satellite. And it’s also easy in connection and installation with ultra-bright LED light
-
Out Of StockOverview :
– Designed wheelbase as 600mm because consider the torsibility of wooden frame. After thousands of twisting resistance tests that verified which is the best wheelbase value.
– Choosing the wheelbase of 500mm make the helicopter steadier that is better for beginner or FPV.
– Simplified outline includes human oriented design for different flight mode, especially consider for battery fixing and FPV platform.
– Light weight design makes more flying time.
– Perfect rotor efficiency and rotor load to get best wind resistance.
– Main frame Made by Friber Glass.
– Rotor design as foldedform can easy to putup. -
Out Of StockFlySky Introduces its newest 6 channel 2.4GHz system, The FS-T6. After years of success with the CT6B, FlySky presents the new FS-T6 with loads of cool and convenient features making the operation of this transmitter simple and instinctive.
The 6-channel FlySky FS-T6 is the perfect transmitter for sport modelers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and airplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.
Programming the FS-T6 is very easy and intuitive. It is implemented with a simple click and scroll dial allowing quick and easy menu navigation and manipulation. The large backlite LCD screen with large fonts is easy to read and the simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you’re making.
FlySky AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz system offers a lot of advantages. It is equipped with a super active and passive anti-jamming capability and has very low power consumption with high receiver sensitivity. The 2.4GHz system puts the radio out of the frequency range by any generated by other electronic components in your model such as the brushless motor, speed controller, servos, or other metal to metal noise. This eliminates interference and glitching that can plague a traditional radio system. Extreme rigorous testing by FlySky engineers makes this AFHDS system solid and worthy.
-
-28%
Power Module for APM 2.8 and quadcopters
Original price was: ₨2,500.00.₨1,799.00Current price is: ₨1,799.00. Quick ViewPower Module for APM 2.8 and quadcopters is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft’s own ESC/BEC for that.
-
Out Of StockThe ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.
This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
-
Out Of Stock- 3DR Mini OSD MAVLink Protocol (Compatible with APM/ SPM2.6/ APM2.65)
- Compatible with APM/ SPM2.6/ APM2.65 flight controls.
- Power supply : 12V
- DC Dimension : 43 x 21mm
- Weight : 4.7g
-
Out Of StockA well made and nicely finished outrunner. Excellent for small foamies and indoor shockflyers.
-
-27%
Out Of Stock30A SimonK Prgramme RC Brushless ESC For Quadcopter Multicopter
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
-
-26%
IMAX B3 AC Compact Balance Charger
Original price was: ₨1,899.00.₨1,399.00Current price is: ₨1,399.00. Quick ViewImax RC B3 Compact Charger SPECIFICATION:
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery
-
-29%
FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver
Original price was: ₨19,850.00.₨13,999.00Current price is: ₨13,999.00. Quick ViewThe FS-CT6B is a professional and practical 2.4GHz 6-Channel digital LCD transmitter, which is equipped with a FS-R6B receiver to make a digital proportional radio control system, and suitable for RC airplane, glider and helicopter. The transmitter adopts easy-to-read LCD screen to show the working status.
-
Out Of StockDJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M in a basic package offering a very competitive price. The innovative All-in-One design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The *optional plug and play GPS module (sold separately) will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience.
-
-28%
Quadcopter Frame – F450 V3
Original price was: ₨5,000.00.₨3,599.00Current price is: ₨3,599.00. Quick ViewQuadcopter / Multi copter Quad-x frame kit in un-assembled form.
-
-20%
A2212 1000KV Brushless DC Motor
Original price was: ₨1,800.00.₨1,449.00Current price is: ₨1,449.00. Quick View- Model: A2212 10T
- Motor KV (RPM/V): 1400
- Maximum Efficiency: 80%
- Current Capacity: 16A Per 60S
- No-Load Current(A): 0.7A @10V
- Max. Efficiency Current: 6-12A
- Maximum Watts(W): 180
- Internal Resistance(mΩ): 65
- Poles: 14
- Shaft Diameter (mm): 3.17
- LiPO Batteries: 2S-3S
- Length (mm): 27.5
- Width (mm): 26.5
- Weight (gm): 62
-
-8%
Out Of StockLiPo 11.1V 3S 2200mAH
Original price was: ₨6,000.00.₨5,499.00Current price is: ₨5,499.00. Quick View- Name: LiPo Battery
- Quantity: 1 Piece
- Capacity: 2200mAh
- Type: Lithium Polymer
- Voltage: 11.1V/3S
- Burst Rate : 25C
- Continuous discharge rate: 25C
- Cells : 3
- Size : 85 x 40 x 27 mm
- Weight: 180g
- Max Burst Discharge: 60C
- Charge Voltage: 12.6V
- Discharge Plug: T Plug, Balance charger plug
-
-37%
10×4.5″ 1045 1045R Counter Rotating Propeller For MultiCoptor available in all colors.
-
-21%
Out Of StockAPM2.8 ArduPilot Mega 2.8 Flight Control Board
Original price was: ₨19,000.00.₨15,000.00Current price is: ₨15,000.00. Quick ViewThis is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.
-
Out Of StockThe Flysky FS-TH9x 9ch radio is the original high value 9ch system. These pack all the features of a 400 radio, and yet cost less than a quarter of that price.
The flysky module keeps the antena at the back of the radio- which allows for easier modification (such as mounting a FPV screen) and module switching.
-
Out Of StockRaspberry Pi 2 Model B Case, type B
-
-62%
HCSR04 ultrasonic sensor Bracket
Original price was: ₨180.00.₨69.00Current price is: ₨69.00. Quick View- Thickness: 2.8 – 3.1 mm
- Inner diameter: 16 mm
- Fixing Hole Diameter: 3.8 mm
- Material: High Quality Imported Acrylic
- Colour: Blue
- Application: Stationary ultrasonic sensor modules and other products
-
Out Of StockRaspberry Pi 2 Model B Case, type A
-
Out Of StockSupport for 51 series microcontroller STC89C52, STC12C5A60S2, AT89C51, AT89C52, AT89S51, AT89S52 most commonly used. In addition, to support the other 40 feet of the 51 series microcontroller and the ATmega16! STC89C52, STC12C5A60S2 can serial direct download program for, AT89S series microcontroller needs need specialized programming download program with USBISP a download manager program, AT89C series microcontroller. The ATmega16 use need to use an adapter plate, the download program needs USBISP Downloader!
-
Out Of StockThe Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
-
-10%
STM Discovery Kit STM32F3 STM32F303VC
Original price was: ₨10,000.00.₨8,999.00Current price is: ₨8,999.00. Quick View- STM32F303VCT6 microcontroller featuring 256 KB Flash, and 48 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
- External application power supply: 3 V and 5 V
- L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
- LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- Two pushbuttons (user and reset)
- USB USER with Mini-B connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
-
Out Of Stock32L152CDISCOVERY, Discovery kit for STM32L151/152 line – with STM32L152RC MCU
-
Out Of StockSTM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART
-
-11%
Out Of StockCore429I, STM32F4 Core Board
Original price was: ₨18,000.00.₨15,999.00Current price is: ₨15,999.00. Quick ViewSTM32 STM32F429IGT6 MCU core board, full IO expander, JTAG/SWD debug interface
-
-11%
STM32F4 Discovery – Arm Cortex M4 Processor kit
Original price was: ₨18,000.00.₨15,999.00Current price is: ₨15,999.00. Quick View- STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 5 V supply voltage
- External application power supply: 3 V and 5 V
- LIS302DL or LIS3DSH ST MEMS 3-axis accelerometer
- MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
- CS43L22, audio DAC with integrated class D speaker driver
- Eight LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power on
- Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
- 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
- Two push buttons (user and reset)
- USB OTG FS with micro-AB connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
-
-18%
Out Of Stock32F746GDISCOVERY, Discovery kit with STM32F746NG MCU
-
Out Of StockFeatures:
1. 12pcs LED, IR distance 10M. Lens 3.6 mm wireless security camera with memory card2. Support ONVIF 2.0, RTSP protocol3. WPS one key setup WiFi, acoustic wave wifi setting4. 720P,VGA,QVGA triple stream(NOTE:it just support 640*480 in firefox,goole chorome.It will be 1280*720P in IE BROWSER.)5. Two-way audio(Note:Audio is not good), Remote Pan/Tilt rotate6. Wi-Fi/802.11/b/g/n,support dynamic IP7. Motion detection, email alert, FTP upload8. Iphone, 3G phone, IOS and android Smartphone supported(don’t support windows APP)9. Multi-language, Firefox, Safari, Google browser10. Pan:270 degree, Tilt: 80degree, auto cruise11. Support 64GB TF Card -
-41%
Heart Rate Monitor ECG AD8232 Module + Leads
Original price was: ₨2,500.00.₨1,479.00Current price is: ₨1,479.00. Quick View- Supply voltage: DC 3.3V
- Output: Analog output
- Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
- Size 36mm * 31mm * 18mm
- Operating temperature: -40C +85 C
-
Out Of StockThis is simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24″ Long.
-
-38%
Out Of StockSingle Lead Heart Rate Monitor ECG – AD8232
Original price was: ₨2,750.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Operating Voltage – 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
- LED Indicator
- 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
-
-46%
Biomedical Sensor Pad (10 pack)
Original price was: ₨1,300.00.₨699.00Current price is: ₨699.00. Quick ViewThis is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
-
-33%
- Model No.: MQ-3
- Dimensions: 36 x 20 x 21 mm (LxWxH)
- Weight: 6gm
- Heater voltage: 50.2V (AC DC)
- Loop voltage: 24V (DC)
- Load resistance: adjustable
- Heating Resistance: 31 3 (Room temperature)
- Heating Power: 900mW
- Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)
- Sensitivity: Rs (in air)/Rs (0.4mg/L alcohol) 5
- Working temperature: 20 degrees 2 degree
- Humidity: 65% 5%RH
- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
- Has a long service life and reliable stability.
- Rapid response recovery features.
-
-44%
Microphone Amplifier – MAX9814 w/ Auto Gain Control
Original price was: ₨800.00.₨449.00Current price is: ₨449.00. Quick View- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
-
-18%
BMP180 – Atmospheric Pressure Sensor
Original price was: ₨300.00.₨245.00Current price is: ₨245.00. Quick View- 1.8V to 3.6V Supply Voltage
- Low power consumption 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise up to 0.02hPa (17cm)
- Full calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
- Weight: 1.18g
- Size: 21mm x 18mm
-
-39%
Pressure Sensor MPX5700AP
Original price was: ₨9,000.00.₨5,499.00Current price is: ₨5,499.00. Quick View- On-chip signal conditioned, temperature compensated and calibrated
- 2.5% maximum error over 0°C to 85°C
- Ideally suited for microprocessor or microcontroller-based systems
- Patented silicon shear stress-strain gauge
- Pressure ranges from 15KPa to 700KPa
- Supply voltage ranges from 4.75VDC to 5.25VDC
- Sensitivity of 6.4mV/KPa
- Response time of 1ms
- Durable epoxy unibody element
- Operating temperature ranges from -40°C to 125°C