-
Out Of StockCapable of maximum continuous discharge rates up to 25C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance.
-
Out Of StockOriainal Lion Power Lipo Battery 11.1V 2200Mah 25C MAX 40C T Plug for RC Car Airplane Align Trex 450 Helicopter Part
-
-6%
Out Of Stock- High quality 4mm Gold Bullet Connectors
- 1 Pair (1 – Female & 1 – Male)
- Great for motor and esc controller connections
- Must solder
-
-22%
Out Of Stock3.5″ IPS TFT LCD for Arduino MEGA2560
Original price was: ₨5,000.00.₨3,899.00Current price is: ₨3,899.00. Quick View- Screen size 3.5″ – 480 X 320 Pixels
- Support Arduino Mega2560 directly
- Control IC: ILI9846
- Compatible with 3.3/5V operation voltage level
- Full-angle IPS TFT panel
- With SD card Socket
- Interface: 16 Bit parallel interface
-
-32%
Force Sensitive Resistor – Small
Original price was: ₨1,899.00.₨1,299.00Current price is: ₨1,299.00. Quick ViewThis is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.
Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.
These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.
-
-24%
Out Of StockINTRODUCTION
This product includes 3-pin 2.0mm(0.08″) mating connector housing(10 units) and crimp pins (30 units).They work with wires ranging from 28 to 26 AWG. -
Out Of StockINTRODUCTION
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. -
Out Of StockINTRODUCTION
This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.
Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.
-
-30%
Out Of StockXBee 1mW Wire Antenna
Original price was: ₨6,500.00.₨4,549.00Current price is: ₨4,549.00. Quick ViewINTRODUCTION
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek! -
Out Of StockThis is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearboxs output shaft.These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.This motor is an ideal option for your mobile robot project.Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole. -
Out Of StockThis is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
-
-28%
Out Of StockDigispark – The tiny, Arduino usb dev board
Original price was: ₨620.00.₨449.00Current price is: ₨449.00. Quick ViewThe micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
-
Out Of StockThe Radio telemetry system base on 3DR Radio system and 100% compatible.
It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. Its available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).
The system provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.
Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.
-
-20%
This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. -
Out Of StockZigBee module, features the CC2530F256 onboard, farther communication distance with PA
Overview
XCore2530 is a ZigBee module based on CC2530F256.
Basically this module can be used in two aspects :
- Develop application with the provided firmware
Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification - Develop your own firmware
In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
- Develop application with the provided firmware
-
-2%
EasyVR Shield 3.0 – Voice Recognition Shield
Original price was: ₨10,000.00.₨9,799.00Current price is: ₨9,799.00. Quick ViewDo you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.
EasyVR 2.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost-effective speech and voice recognition capabilities to virtually any application. EasyVR is the third-generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 2.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.
-
Out Of StockInfrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!
-
Out Of StockInfrared Proximity Range – GP2Y0A41SK0F Sharp Short Range Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5 to 12 (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.
-
Out Of StockInfrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
-
Out Of StockThis Robot is made of 18 SG90 Servo Motors
To make this robot move, we just need the control software and the following components:
1.6 Legs 18 DOF Robot Black Spider Robot 18pcs SG90 Servo Motor
2.32 Channels Servo Motor Controller Robot Contorller Servo Driver
3.7.4V power supply -
-20%
Out Of StockXBee Pro 60mW PCB Antenna – Series 1
Original price was: ₨7,500.00.₨5,999.00Current price is: ₨5,999.00. Quick ViewThis is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
-
-17%
Out Of StockXBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
Original price was: ₨6,000.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewThis is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way. -
-27%
Out Of StockThe Magician Chassis is our latest robot platform. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller.
-
-10%
- 5 X Multifunctional bracket
- 4 X Long U shape bracket
- 1 X L shape bracket
- 4 X Cup bearing
- 1 X Alloy mechanical claw
- 3 X U beam bracket
- 6 X 25T Plastic Servo Arm plate
- 6 X MG946R MG946 R 180 Degree Metal Gear Servo Motor
- 1 X Screw nuts
-
Out Of StockThis is the Standard Gripper Kit B, a simple and durable robotics kit that is great for getting a grip on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6″ wide max, has an overall body length of 5″ long with a 1.3″ wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.
-
-19%
his 6DOF Biped robot is a professional small humanoid robot consist of full aluminium parts, special non-ferrous oxidation process on surface, smooth edges not hurting hands, the metal is unbleached, beautiful and durable, prevent decoloring for long time using.
The robot you can mount six micro servos, each foot is 3DOF, the robot can both walk forward or backward and crouch, stand up, turn, even can do a lot of forward roll and backward roll.The kit includes six TowerPro MG995 servos.
-
Out Of Stock1. multi-function servo bracket x 16
2. long U-shaped bracket x4
3. short U-shaped bracket x 7
4. oblique U bracket x 4
5. L bracket x 4
6. big feet x 2
7. U-beam x 1
8. cup bearings x 14
9. a word board x 4
-
-37%
Out Of StockRobotic Metallic Claw
Original price was: ₨1,899.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThe Kit comes with hardware, un-assemble
Clamp Max open is 55mm
Clamp total length:108mm
Clamp total width:98mm (when the Clamp open)
The plank kit is very light
Compatible with MG995 and SG90 servo motor -
Out Of StockSpecification:
- Minimum Capacity: 1000mAh
- Battery Voltage: 11.1V / 3Cell
- Constant Discharge: 25C (25Amps)
- Peak Discharge (10sec): 35C (66Amps)
- Pack Weight: 141g
- Pack Size: 78 X 33 X 19mm
- Charge Plug: JST-XH
Weight
:
<b>141 GRM
-
Out Of StockBattery item: LION Power 7.4V 90M 25C
Capacity:900mAh
Continuous discharge rate:25C
Size: Length 57mm x Width 30mm x Height 14mm
Plug style: Blance charger,T Plug
Colors: Standard Colors -
Out Of StockThe QQ Super Multi-rotor flight control is built-in precise digital gyroscope and acceleration sensor with self-stabilizing function and super stable flight performance. Besides all standard PCM and 2.4G digital receiver, It also compatiblr with S.BUS DSM2 and DSMX satellite. And it’s also easy in connection and installation with ultra-bright LED light
-
Out Of StockOverview :
– Designed wheelbase as 600mm because consider the torsibility of wooden frame. After thousands of twisting resistance tests that verified which is the best wheelbase value.
– Choosing the wheelbase of 500mm make the helicopter steadier that is better for beginner or FPV.
– Simplified outline includes human oriented design for different flight mode, especially consider for battery fixing and FPV platform.
– Light weight design makes more flying time.
– Perfect rotor efficiency and rotor load to get best wind resistance.
– Main frame Made by Friber Glass.
– Rotor design as foldedform can easy to putup. -
Out Of StockFlySky Introduces its newest 6 channel 2.4GHz system, The FS-T6. After years of success with the CT6B, FlySky presents the new FS-T6 with loads of cool and convenient features making the operation of this transmitter simple and instinctive.
The 6-channel FlySky FS-T6 is the perfect transmitter for sport modelers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and airplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.
Programming the FS-T6 is very easy and intuitive. It is implemented with a simple click and scroll dial allowing quick and easy menu navigation and manipulation. The large backlite LCD screen with large fonts is easy to read and the simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you’re making.
FlySky AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz system offers a lot of advantages. It is equipped with a super active and passive anti-jamming capability and has very low power consumption with high receiver sensitivity. The 2.4GHz system puts the radio out of the frequency range by any generated by other electronic components in your model such as the brushless motor, speed controller, servos, or other metal to metal noise. This eliminates interference and glitching that can plague a traditional radio system. Extreme rigorous testing by FlySky engineers makes this AFHDS system solid and worthy.
-
Out Of StockThe ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.
This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
-
Out Of Stock- 3DR Mini OSD MAVLink Protocol (Compatible with APM/ SPM2.6/ APM2.65)
- Compatible with APM/ SPM2.6/ APM2.65 flight controls.
- Power supply : 12V
- DC Dimension : 43 x 21mm
- Weight : 4.7g
-
Out Of StockA well made and nicely finished outrunner. Excellent for small foamies and indoor shockflyers.
-
-27%
Out Of Stock30A SimonK Prgramme RC Brushless ESC For Quadcopter Multicopter
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
-
Out Of StockDJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M in a basic package offering a very competitive price. The innovative All-in-One design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The *optional plug and play GPS module (sold separately) will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience.
-
-21%
Out Of StockAPM2.8 ArduPilot Mega 2.8 Flight Control Board
Original price was: ₨19,000.00.₨15,000.00Current price is: ₨15,000.00. Quick ViewThis is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.
-
Out Of StockThe Flysky FS-TH9x 9ch radio is the original high value 9ch system. These pack all the features of a 400 radio, and yet cost less than a quarter of that price.
The flysky module keeps the antena at the back of the radio- which allows for easier modification (such as mounting a FPV screen) and module switching.
-
Out Of StockRaspberry Pi 2 Model B Case, type B
-
Out Of StockRaspberry Pi 2 Model B Case, type A
-
Out Of StockSupport for 51 series microcontroller STC89C52, STC12C5A60S2, AT89C51, AT89C52, AT89S51, AT89S52 most commonly used. In addition, to support the other 40 feet of the 51 series microcontroller and the ATmega16! STC89C52, STC12C5A60S2 can serial direct download program for, AT89S series microcontroller needs need specialized programming download program with USBISP a download manager program, AT89C series microcontroller. The ATmega16 use need to use an adapter plate, the download program needs USBISP Downloader!
-
Out Of StockThe Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
-
-10%
STM Discovery Kit STM32F3 STM32F303VC
Original price was: ₨10,000.00.₨8,999.00Current price is: ₨8,999.00. Quick View- STM32F303VCT6 microcontroller featuring 256 KB Flash, and 48 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
- External application power supply: 3 V and 5 V
- L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
- LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- Two pushbuttons (user and reset)
- USB USER with Mini-B connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
-
Out Of Stock32L152CDISCOVERY, Discovery kit for STM32L151/152 line – with STM32L152RC MCU
-
Out Of StockSTM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART
-
-11%
Out Of StockCore429I, STM32F4 Core Board
Original price was: ₨18,000.00.₨15,999.00Current price is: ₨15,999.00. Quick ViewSTM32 STM32F429IGT6 MCU core board, full IO expander, JTAG/SWD debug interface