-
Features:- Type: SPDT
- Total Size:9mm x 4.5mm x 11mm
- Knob Size:2mm x 2mm x 3mm
- Rated Road: DC 50V 500mA
- Mounting Type: Through-hole
- Pin Pitch:2mm
-
- Manufactured using high quality and excellent durable materials.
- Perfect replacement for the original Charging Connector.
- Precision machining fits the cell phone perfectly.
- High-quality OEM product, tested and quality checked for each piece before shipping.
- This part is not returnable so please be sure that you are purchasing the proper & correct part for your specific device.
- The image shown is for presentation purposes only, the actual product will be different from what shown in the image.
-
BT134 Triac – 600V – 4A (BT134-600E) Triac they are used in AC switching and control applications with current ratings from under 1A to 40A rms. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. It has Maximum Terminal current: 4A, Max Terminal Voltage is 600 V, Gate trigger current: 25mA & On-state Gate voltage: 1.7V.
-
A potentiometer knob is an accessory that is used as a control knob for a potentiometer.
-
- Low Voltage and Standard-Voltage Operation
- 2-wire Serial Interface
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Bi-directional Data Transfer Protocol
- 100kHz and 400kHz Compatibility
- Write Protect Pin for Hardware Data Protection
- 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
- Partial Page Writes are Allowed
- Self-timed Write Cycle (10mS max)
-
The LM741 series are general-purpose operational amplifiers which feature improved performance over industry.The amplifiers offer many features : overload protection on the input and output, no latch-up when the common-mode range is exceeded, as well as freedom from oscillations. The LM741C is identical to the LM741 and LM741A except that the LM741C has their performance ensured over a 0C to +70C temperature range, instead of 55C to +125C.
-
LM324 Operational Amplifier IC LM-324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages. Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902) Dual Supplies: 1.5 V to 16 V (13 V for LM2902) Low Supply-Current Drain.
-
-23%
- Case: R-6
- Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C
- Terminals: Finish Tin. Axial Leads, Solderable per MILSTD-202, Method 208
- Polarity: Color Band Indicates Cathode
- Approximate Weight: 2.1 grams
-
-24%
A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package.
A DIP switch also known as DIP switches, toggle switch, over clocking switch, the address switch, mired switch, digital switch, DIP switch
DIP switches are an alternative to jumper blocks. Their main advantages are that they are quicker to change and there are no parts to lose.
-
-37%
- Size 12Inch
- Type: self-locking nylon cable tie
- Material: Nylon66 Cable Tie
- Feature: Heat resistant, erosion control, insulate well.
- Operation Temperature: -40 c to 85c
- Colour: Natural (white or standard colour), UV black.
- Package: Polybag + Label (100pcs/bag)
- To keep all wires in place this product is what u are waiting for.
-
-24%
- Voltage rating: 12VDC
- Current rating: 50mA
- Contact resistance: 30m
- Insulation resistance: 100M
- Bounce time: 10msec
- Operating force: 2.550.69 N
- Operating temperature range: -30 to 70
-
-24%
- small size switch (6mm x 6mm)
- snap-in type switch
- perfect to be soldered on a board
- can be used as a reset switch
- input voltage: min. 1 V max. 12 V
- input current: min. 10 uA max. 50 mA
- operating temperature: 25C to +70C
- travel: 0.25 mm
- number of pins: 4
-
-46%
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
-
-46%
- Camera Exposure control
- Auto slide focus dual cell
- Photocopy machines density of toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales dual cell
- Automatic gain control modulated light source
- Automated Rear View Mirror
-
-24%
Out Of StockINTRODUCTION
This product includes 3-pin 2.0mm(0.08″) mating connector housing(10 units) and crimp pins (30 units).They work with wires ranging from 28 to 26 AWG. -
-22%
Battery lugs are an important component to creating a solid connection between your battery cable and the battery that powers your electrical system. Buy the best quality battery lugs from ElectroNation.
-
-49%
4 pin Reset Switch Special Features:
- Product Name: 4 pin Reset Switch Big
- Max. Voltage:DC12V
- Max. Current:50mA
- Travel:0.350.1mm
- Life cycle:100000 cycles
- Operating force:100 30gf
- Contact resistance:100m
- insulation resistance:100M
- Storage temperature range:-40~90
-
-28%
Specification
- Origin: China
- Type: DIAC
Package Type: Through Hole - Package: DO-35
- Breakover Voltage: 28v to 36v
- Typical Breakover voltage: 32v
- Output voltage: 5v
- Breakover current: 50µA
- Leakage current: 10µA
- Peak current: 0.30A
- Rise time: 2µs
- Operating junction temperature: -40℃ to +125℃
- Storage temperature range: -40°c – +125°c
-
-40%
5mm 4pin Piranha LED White Super Bright Green LED light NEW
Original price was: ₨25.00.₨15.00Current price is: ₨15.00. Quick View- High-Quality Construction: Crafted with precision and durability to ensure reliable performance.
- Clear Transparent Lens: Maximizes light transmission for optimal brightness and clarity.
- Easy Integration: Four pins for seamless installation into electronics projects.
- Low Power Consumption: Operates at a voltage of 2V and draws a current of 20mA for efficient energy usage.
- Versatile Applications: Ideal for indicator lights, mood lighting, decorative displays, and various electronics projects.
- Uniform Illumination: Delivers consistent and uniform light output for professional-grade results.
- Longevity: Engineered for durability and longevity, providing long-lasting performance.
- Vibrant Red Light: Enhances your creations with a striking and vibrant red glow.
-
A banana connector is a single-wire electrical connector used for joining wires to equipment.
-
This is 9V DC battery clip.
-
-25%
1N5822 40V 3A Schottky Rectifier Diode
Original price was: ₨20.00.₨15.00Current price is: ₨15.00. Quick View- Schottky Rectifier Diode
- Average forward current =3A
- Forward Surge Current =25A
- Forward Voltage Drop =600mV at 1A
- Peak reverse voltage =40V
- RMS Reverse Voltage =28V
- Forward Surge Current Ifsm Max =80A
- Diode Case Style =DO-27
-
A terminal block is a screw type electrical connector where the wires are clamped down to a metal part by a screw. This is a 2 pin terminal block.
-
-22%
Out Of StockMaxell 377 27mAh 1.55V SR626SW
Original price was: ₨18.00.₨14.00Current price is: ₨14.00. Quick View- 100% brand new!
- High quality 377/SR626SW battery button coin cells batteries, big power for tiny devices.
- Durable and cost-saving, high energy density, ensures longer battery life and long-lasting power.
- Safety and no-leakage, mercury-free grade A cells, tested under strict quality control standards.
- Can be used for electric toys, calculator, computer motherboard, watch, camera, car security alarm, keyless car remotes, electronic hearing aid, PDAs, electronic organizers, pet collars, counter, remote control, electronic instrument, blood glucose meter, cholesterol testing meter, LED light and other electronic appliances.
-
A push-button is a simple switch mechanism for controlling some aspect of a machine or a process. It completes an electric circuit when you press on it. When it’s on, a small metal spring inside makes contact with two wires, allowing electricity to flow.
-
10V-1.5W Zener Diode, general purpose zener diode used in many circuits.
-
- Xener Diode 9V
- Power 0.5W (1/2 watt)
- Good Quality
- Bread Board Mount
-
- Light, Safe & Unbreakable.
- Slip Proof Lock.
- Simply to insert Due to Bent Tail.
- Inside Serration For a Strong Hold onto Bundles.
- Easy Application Either Manually or With a Processing Tool.
- These Cable Ties Are Used For Routing, Bundling & Securing of Cables, Pipes and Hoses As Well As For Car Wheel Cup.
-
A push-button is a simple switch mechanism for controlling some aspect of a machine or a process. It completes an electric circuit when you press on it. When it’s on, a small metal spring inside makes contact with two wires, allowing electricity to flow.
-
BC327 is a PNP bipolar junction transistor which is mainly designed for general purpose, small signal and switching applications.
-
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
-
2N4401 is an NPN bipolar junction transistor that is mainly designed for general purpose, small signal, and switching applications.
-
2N5551 is an NPN amplifier Transistor with an amplification factor (hfe) of 80 when the collector current is 10mA. The transistor is commonly used for amplification of audio or other low power signals.
-
Specifications:
- Power (Watts) 1W
- Resistant 22K OHMS
- Tolerance +- 5%
- Resistor Type Carbon Film
- Lead Free
-
-17%
- Overall height above PCB: 4.8mm
- PCB hole required: 0.6mm
- Pitch Width: 7.62mm (0.3in)
- Pin Pitch: 2.54mm (0.1in)
- Pins: 16 pins
-
14 Pin – DIP IC Socket/Base IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
-
Overall height above PCB: 4.8mm
-
PCB hole required: 0.6mm
-
Pitch Width: 7.62mm (0.3in)
- Pin Pitch: 2.54mm (0.1in)
- Pins: 14 pins
-
-
Features and Technical Specification
- Having a high value of current (max. 600 mA)
- Low voltage value (max. 40 V)
- It comes in different types of packages TO-92, TO-18
- These are Lead (Pb) free devices
- Collector to Emitter voltage (VCEO) is 40v (max.)
- Collector to Base voltage (VCBO) is 60v (max.)
- Emitter to Base voltage(VEBO) is 5v (normally)
- The maximum value of Collector current is 600mA
- Power dissipation at ambient temperature is about 400mW
- Having DC current gain (hfe) of 100 to 300 (max.)
- The temperature of operation and storage is -65 to +150 C
-
2N5401 Features and Electrical Characteristics
- Available in Pb Free package
- High collector breakdown voltage
- With DC Current Gain (hFE) up to 100
- Maximum voltage across collector and emitter: 150V
- Maximum current allowed trough collector: 600mA
- Maximum voltage across collector and base: 160 V
- Maximum voltage across base and emitter: 5V
- Operating temperature range: -55C to +150C
- Maximum power dissipation: 0.62 W
-
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Collector Emitter Voltage (VCE) is 40V
- Collector Base Voltage (VCB) is 40V
- Available in To-92 Package
-
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Base- Emitter Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 40V
- Collector-Base Voltage (VCB) is 60V
- Available in To-92 Package
-
-17%
- Resistance: 100K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
-17%
- Resistance: 503 50K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
-17%
- Resistance: 203 20K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
-17%
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element.The position of the wiper determines the output voltage of the potentiometer. small screw driver can be used for calibration of resistance value.
-
-17%
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element.The position of the wiper determines the output voltage of the potentiometer. small screw driver can be used for calibration of resistance value.
-
-17%
- Resistance: 2K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
-17%
1K Potentiometer (Pot) is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element.The position of the wiper determines the output voltage of the potentiometer. small screw driver can be used for calibration of resistance value.