Shop

Default sorting
Show
48
  • Quick View

    LiPo 11.1v 2650mAH 1C – Turnigy

    (0)
    ₨1,500.00

    Features:

    The Turnigy 2650mAh Transmitter pack fits snuggly into any Futaba or Jr radio which uses a 4×4 AA cell battery configuration

  • -14%
    Quick View

    4WD Robo Chasis

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,549.00.

    Features:

    – Simple mechanical structure, easy for installation.
    – Adopts 4 decelerate DC motors, ensuring flexbility and good direction.
    – Large and stable Chassis, easy for expansion.
    – speed test encoding disk.
    – recommend use L293D 4 motors driver board and 4 Channel Infrared Detector Tracked Photoelectricity Sensor Obstacle Avoidance

  • -37%
    Quick View

    Multicolor LED Strip

    (0)
    Original price was: ₨2,450.00.Current price is: ₨1,549.00.
    Led strip lights 16.4 ft: SMD LED, 24 key IR remote 16 color 4 DIY modes, colorful mood lighting. Cuttable and Linkable: The led lights can be easily cut and linked with other strip led lights, which can be cut every 3 LEDs along with the cutting marks, you can also customize the length of the led lights. Easy Installation: Complete led light strip kit Including 1 rolls of 16.4ft led light strips, power adapter, 24keys remote Control, controller, instruction manual, led strip lights installation accessories(4 pin connectors, gapless solderless connectors, back adhesive hooks), no need for other devices, self-adhesive tape easy to install. Multiple Scenes Available: Rgb led strip rope lights is a suitable house ornament, transforms your home, kitchen, ceiling, back of tv, desk, stairs, bar, and more multiple Scenes Available: Rgb led light strip is a suitable house ornament, transforms your home, kitchen, ceiling, lcd, tv, table, stairs, room, drawing room and more with color changing lights.
  • -14%
    Quick View

    SARA Digital Timer Relay 12V

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,550.00.
  • -14%
    Quick View

    A2212 2200KV Brushless DC Motor BLDC

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,550.00.
    • Recommended Voltage: 2-12VDC
    • Internal Resistance: 90mΩ
    • Shaft Size: 3.17mm (1.8″)
    • Shaft Length: 11mm
    • Motor Diameter: 27.5mm
    • Motor Length (Overall): 40mm
    • Current Capacity: 12A/60s
    • Max Efficiency: 80%
    • Max Power: 239W
    • Recommended ESC: Minimum Of 18A
    • Recommended Model Weight: 300-1000g
    • Mounting Holes: M3
    • Wire Length: ~70mm
  • Hot
    -47%
    Quick View

    Arduino UNO R3 Dip WITH CABLE

    (2)
    Original price was: ₨3,000.00.Current price is: ₨1,579.00.
    • ATmega328 microcontroller
    • Input voltage – 7-12V
    • 14 Digital I/O Pins (6 PWM outputs)
    • 6 Analog Inputs
    • 32k Flash Memory
    • 16Mhz Clock Speed
    • ATmega328
    • Operating Voltage 5V
    • Input Voltage (recommended) 7-12V
    • Input Voltage (limits) 6-20V
    • Digital I/O Pins 14 (of which 6 provide PWM output)
    • Analog Input Pins 6
    • DC Current per I/O Pin 40 mA
    • DC Current for 3.3V Pin 150 mA
    • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
    • 2 KB (ATmega328) EEPROM
    • 1 KB (ATmega328)
    • Clock Speed 16 MHz
  • -9%
    Quick View

    Arduino Leonardo R3

    (1)
    Original price was: ₨1,750.00.Current price is: ₨1,599.00.

    he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

  • -60%
    Quick View

    INFRARED TEMPERATURE SENSOR GY-906 MLX90614

    (0)
    Original price was: ₨3,950.00.Current price is: ₨1,599.00.
    • Easy to integrate
    • Mounted on a breakout board with two types of pins
    • 10k Pull up resistors for the I2C interface with optional solder jumpers
    • Factory calibrated in temperature range:
      • -40+125C for sensor temperature
      • -70+380C for object temperature
    • High accuracy of 0.5C over a wide temperature range (+50C for both) High (medical) accuracy calibration
    • The measurement resolution of 0.02C
    • Single and dual-zone versions
    • SMB is compatible digital interface
    • Customizable PWM output for continuous reading
    • Different package options for applications and measurements versatility
  • -36%
    Quick View

    Imported Quality Soldering Helping Hand Soldering Stand

    (1)
    Original price was: ₨2,500.00.Current price is: ₨1,599.00.
  • -41%
    Quick View

    MAX31865 RTD PT100 Amplifier

    (0)
    Original price was: ₨2,700.00.Current price is: ₨1,599.00.
    • Advantage: Handling all of your RTD needs.
    • Strong point: Compensating 3 or 4-wire RTDs for better accuracy.
    • Characteristic: Could be used with any Arduino or microcontroller.
    • Feature: 3.3V regulator and level shifting.
    • Feature: Could be used with any 2, 3, or 4-wire PT100 RTD.
  • -16%
    Quick View

    ESP32-CAM WiFi + Bluetooth Camera Module

    (4)
    Original price was: ₨1,900.00.Current price is: ₨1,599.00.
    • Module Model: ESP32-CAM
    • Package: DIP-16
    • Size: 2740.54.5(?0.2)mm
    • SPI Flash: Default 32Mbit
    • RAM: Internal 520KB + External 4M PSRAM
    • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
    • Wi-Fi: 802.11 b/g/n/e/i
    • Support Interfaces: UART, SPI, I2C, PWM
    • TF Card Support: Maximum 4G
    • IO Port: 9
    • Serial Port Rate: Default 115200 bps
    • Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
    • Antenna: Onboard PCB antenna with a gain of 2dBi
    • Power Supply Range: 5V
    • Operating Temperature: -20°C to 85°C
  • Quick View

    LiPo 11.1V 900Mah 25C LION POWER

    (0)
    ₨1,600.00

    Battery item: LION Power 7.4V 90M 25C
    Capacity:900mAh
    Continuous discharge rate:25C
    Size: Length 57mm x Width 30mm x Height 14mm
    Plug style: Blance charger,T Plug
    Colors: Standard Colors

  • Quick View

    3DR mini OSD

    (0)
    ₨1,650.00
    • 3DR Mini OSD MAVLink Protocol (Compatible with APM/ SPM2.6/ APM2.65)
    • Compatible with APM/ SPM2.6/ APM2.65 flight controls.
    • Power supply : 12V
    • DC Dimension : 43 x 21mm
    • Weight : 4.7g
  • -18%
    Quick View

    MPU9250 IMU 9DOF MPU-9250

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,650.00.
    • Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
    • Three 16-bit ADCs for digitizing the accelerometer outputs
    • Three 16-bit ADCs for digitizing the magnetometer outputs
    • Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
    • Accelerometer full-scale range of 2g, 4g, 8g, and 16g
    • Magnetometer full-scale range of 4800T
    • I2C and SPI serial interfaces
    • Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
    • Power supply: 3-5v
  • -20%
    Quick View

    xbee Shield

    (0)
    Original price was: ₨2,115.00.Current price is: ₨1,692.00.
    • 3.3V @ 50mA
    • 250kbps Max data rate
    • 1mW output (+0dBm)
    • 300ft (100m) range
    • Wire antenna
    • Fully FCC certified
    • 6 10-bit ADC input pins
    • 8 digital IO pins
    • 128-bit encryption
    • Local or over-air configuration
    • AT or API command set
  • -38%
    Quick View

    Single Lead Heart Rate Monitor ECG – AD8232

    (0)
    Original price was: ₨2,750.00.Current price is: ₨1,699.00.
    1. Operating Voltage – 3.3V
    2. Analog Output
    3. Leads-Off Detection
    4. Shutdown Pin
    5. LED Indicator
    6. 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
  • -6%
    Quick View

    BTS 7960 Motor Driver 43A

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,699.00.
    • Double BTS7960 large current (43 A) H bridge driver;
    • 5V isolate with MCU, and effectively protect MCU;
    • 5V power indicator on board;
    • voltage indication of motor driver output end;
    • can solder heat sink;
    • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
    • isolation chip 5 V power supply (can share with MCU 5 V);
    • size: 4 * 5 * 1.2 cm;
  • -6%
    Quick View

    TB6600 Arduino Stepper Motor Driver 4A, 5A

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,699.00.
    • This stepper motor driver supports 8 kinds of current control.
    • This stepper driver supports 7 kinds of micro-steps adjustable.
    • Stepper motor driver interface adopts high-speed optocoupler isolation.
    • It has the feature of automatic semi-flow to reduce heat.
    • It has a large area heat sink.
    • It has anti-high-frequency interference ability.
    • It has input anti-reverse protection
    • It has the feature of overheating, over-current, and short circuit protection.
  • -15%
    Quick View

    TCS230 Color Sensor

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,699.00.
    • Imported chips TCS3200 PCB board with gold plating.
    • TCS3200 is TCS230 upgrade version, the better.
    • Power supply: 3-5v
    • Anti-light interference.
    • White LED, can control the on and off.
    • Can detect non-luminous object color.
    • PCB dimensions: (L) 33mm * (W) 25mm
  • -43%
    Quick View

    Hot End For 3D Printer

    (0)
    Original price was: ₨3,000.00.Current price is: ₨1,699.00.
    • Model: J-Head Hot End V6
    • Design: Long-Distance
    • Improved processing of flexible filament
    • More compact design
    • Easier maintenance
    • Reduced heating
    • Improved temperature control and cooling
    • Material: aluminum
    • Nozzle: 0.4 mm
    • Filament: 1.75 mm
    • 12V 40W heating cartridge
    • NTC thermistor 100k
    • Cable length: approx. 90 cm
  • Hot
    -19%
    Quick View

    UNO R3 WiFI Development Board ATmega328P

    (0)
    Original price was: ₨2,100.00.Current price is: ₨1,699.00.
    • Arduino UNO R3 board integrated with esp8266 module
    • Program both UNO and esp8266 separately using dip switch
    • UNO and esp8266 can communicate each other via serial by adjusting dip switch
    • Supply Voltage: 6~9V recommend
    • USB-converter: CH340G. Need to install driver software to program
    • PinOut UNO: UNO R3
    • Digital I/O Pins: 14
    • Analog I/O Pins: 6
    • Logic Level: 5V
    • Operating temperature: −40С°/+125С°
    • MCU: ATmega328
    • WiFi MCU: ESP8266
    • UNO+WiFi R3 ATmega328P+ESP8266 (4Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266
  • -36%
    STM32F401 Minimum System Development Board Module STM32F401CCU6 STM32F4
    Quick View

    STM32F401 F411 Black Pill Mini Development Board

    (0)
    Original price was: ₨2,650.00.Current price is: ₨1,699.00.
    • STM32F411CEU6 (100Mhz) with 512KB FLASH & 128KB RAM
    • Onboard LDO for 5V to 3.3V DC conversion
    • 2x 20 Pin Single Line Header which gives access to all the IOs. The board comes with unsoldered header connectors.
    • The header for SWD Programming Interface
    • Switches for Reset, Boot Mode, User
    • LED for Power and another connected on GPIO(C13)
    • 25MHZ high speed crystal, 32.768Khz low speed crystal
    • BOOT0 and NRST, releasing NRST to access serial port download, and DFU download, using ST multi-in-one STM32 Cube Programmer burning software.
    • Option to solder SPI Memory on the bottom side of the board.
    • USB-C type Connector
  • -48%
    Quick View

    EGS002 EG8010 IR2113 DC to AC SPWM Pure Sine Wave Inverter Module

    (0)
    Original price was: ₨3,250.00.Current price is: ₨1,699.00.

    EG8010 is a digital, function very well brings its own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer architecture, an external 12MHz crystal oscillator, to achieve high precision, and harmonic distortion is very small, 50Hz or 60Hz pure sine wave inverter ASIC. The chip uses CMOS technology, the internal integration of the SPWM sine generator, a dead-time control circuit, the multiplier factor range, a soft start circuit, a protection circuit, an RS232 serial communication interface and a serial driver module 1602 functions.

  • -12%
    Quick View

    Gy-61 Triple Axis Accelerometer Adxl335

    (1)
    Original price was: ₨1,990.00.Current price is: ₨1,749.00.
    1. 3V-6V DC Supply Voltage
    2. Onboard LDO Voltage regulator
    3. Can be interfaced with a 3V3 or 5V Microcontroller.
    4. All necessary components are populated.
    5. Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
    6. Tap/Double Tap Detection
    7. Free-Fall Detection
    8. Analog output
    9. Build in ultra-low noise linear LDO voltage regulator
    10. Built-in onboard filters, which reduce noise from the motor and other high-current electronics
    11. All sensors connected to the I2C bus
    12. You can easily select two I2C addresses for MPU6050 by soldered jumper
    13. Power LED
    14. Build in Logic level converter for I2C
    15. Dimensions 20x16mm
    16. Designed for 5V logic level
  • -30%
    Quick View

    Tb6560 3a Stepper Motor Driver Module Cnc Single Axis Controller Module

    (0)
    Original price was: ₨2,500.00.Current price is: ₨1,749.00.
    • Low cost and good high-speed torque
    • Supply voltage up to +32 VDC
    • Output current up to 3.0A
    • Pulse frequency up to 20 KHz
    • Suitable for 2-phase and 4-phase motors
    • Over-voltage and short-circuit protection
    • 7 output current choices, max 3200 steps/rev
    • Automatic idle-current reduction
    • Slim size (96x61x37mm)
  • -28%
    Quick View

    Power Module for APM 2.8 and quadcopters

    (0)
    Original price was: ₨2,500.00.Current price is: ₨1,799.00.

    Power Module for APM 2.8 and quadcopters is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.

    Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft’s own ESC/BEC for that.

  • -10%
    Quick View

    Adjustable Soldering Iron 80W 220V/110V LCD Digital Display

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,799.00.
  • -26%
    Quick View

    STC-1000 Digital Temperature Controller Thermostat Module

    (2)
    Original price was: ₨2,500.00.Current price is: ₨1,849.00.
    • Measuring range: -50 – 99°C.
    • Resolution: 0.1°C.
    • Accuracy: ±1°C (-50 – 70°C).
    • Sensor error delay: 1 minute.
    • Supply: 220VAC±10%, 50/60Hz
    • Consumption: ≤3W.
    • Sensor: NTC sensor (1PC).
    • Relay contact capacity: Cool 10A/250VAC; Heat 10A/250VAC.
    • Ambient temperature : 0 – 60°C.
    • Storage temperature: -30 – 75°C.
    • Relative humidity: 20% – 85% (No condensate).
    • Front panel size : 75(L) x 34.5(W)(mm)
    • Mounting size: 71(L) x 29(W)mm.
    • Probe Length: 1m (include the probe).
    • Size: 75(L) x 34.5(W) x 85(D)mm.
  • Quick View

    10 DOF IMU Sensor

    (0)
    ₨1,850.00

    3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.

    ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.

  • Quick View

    Standard Gripper Kit B – Straight Mount

    (0)
    ₨1,850.00

    This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for getting a grip on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6″ wide max, has an overall body length of 5″ long with a 1.3″ wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.

  • Quick View

    LiPo 11.1v 1500mAH 35C – ZOP Power

    (0)
    ₨1,850.00

    Caution:

    1. Don’t over-charge, or over-discharge batteries.
    2. Don’t put it beside the high temperature condition.
    3. Don’t throw it into fire.
    4. Don’t throw it into water.
  • -20%
    Quick View

    DC Gear Motor With Encoder (6V 210RPM)

    (0)
    Original price was: ₨2,340.00.Current price is: ₨1,872.00.

    This is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.

  • -14%
    Quick View

    16 Channel Relay Module

    (0)
    Original price was: ₨2,200.00.Current price is: ₨1,899.00.
    • Product Name: 16-Channel Relay Module
    • Number of Channels: 16
    • Control Signal voltage: 5V, active low
    • Load Voltage: AC 250V/10A, AC 125V/15A
    • DC 30V 10A
    • Input power: 12V
    • Each board needs 15-20mA Driver Current
    • I / O port driver is active in low level.
    • 1-16 channel optionally fully open/closed,
    • or any channel.
    • Standard interface that can be controlled directly by microcontroller
    • Indication LEDs for Relay output status.
    • Independent common end COM makes the relay convenient for users to access different signals.
    • Use optocoupler protection with high safety performance
    • Widely used for all MCU control, industrial sector, PLC control, smart home control.
    • Size: 8 x 5.7 x 1.2 inches
    • Weight: 8.8 ounces
  • Quick View

    Meanwell Switching Mode Power Supply 5V-7A

    (0)
    ₨1,899.00
    • Output Voltage 5V
    • Type Enclosed Type
    • Approx. Wattage 35W
    • Features Standard
    • Series LRS(Reliable)
    • Mechanical Form Enclosed
    • IP Level Non-Waterproof
    • Input Voltage 100-240V auto-select
  • -5%
    Quick View

    7th gen Electric vehicle throttle electric motorcy

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,899.00.
  • -26%
    Omron Analog Timer H3BA-8 24VDC Timer Relay
    Quick View

    Analog Timer H3BA-8 24VDC Timer Relay

    (0)
    Original price was: ₨2,550.00.Current price is: ₨1,899.00.
  • -47%
    Quick View

    Battery Capacity Indicator DC 8V-100V Voltmeter Voltage Gauge 12V 24V 48V 72V

    (0)
    Original price was: ₨3,590.00.Current price is: ₨1,899.00.
    • Item Type: Battery Monitor
    • Material: ABS
    • Display Color: Colored
    • Voltage Measurement Range:  DC8-80V
    • Measurement Accuracy: 1% ± 1 word.
    • Display: LCD screen
    • Measurement Speed: about 2 times per second.
    • Dimensions: Approx. 6.5 x 3.5 x 1.5cm / 2.6×1.4×0.6in
    • Installation Size: Approx .58 x 28mm / 2.3×1.1in
    • Lead Length: 20cm / 7.9in
  • -44%
    Quick View

    12v 4 Channel IR Infrared Remote Control Switch Relay Module Board Kit

    (1)
    Original price was: ₨3,500.00.Current price is: ₨1,949.00.
    1. Can be high and low bidirectional trigger, support a variety of single-chip, support Arduino.
    2. Anti-interference ability, the use of diode freewheeling protection.
    3. Relay contact part of the use of double-sided thick wiring, for large current through, safe and reliable.
    4. Each relay output is led to normally open and normally closed two groups of electric shock, easy to use and flexible.
    5. Finished product with 100% functional testing and stability testing.
    6. Through the MCU control, can achieve external self-locking mode and non-self-locking two ways to trigger the relay.
  • Quick View

    ZigBee XCore2530 1500M

    (0)
    ₨1,950.00

    ZigBee module, features the CC2530F256 onboard, farther communication distance with PA

    Overview

    XCore2530 is a ZigBee module based on CC2530F256.

    Basically this module can be used in two aspects :

    • Develop application with the provided firmware
      Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification
    • Develop your own firmware
      In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
  • Hot
    -45%
    Quick View

    Raspberry Pi GPIO Expension Board

    (0)
    Original price was: ₨3,599.00.Current price is: ₨1,969.00.
  • -43%
    Quick View

    TQ-77 Soldering Gun 100WmaX

    (0)
    Original price was: ₨3,500.00.Current price is: ₨1,999.00.
    • Two-Stage Heat-Switch System
    • Easy heater-on check
    • High-power ceramic heater
    • Prevent fatigue
    • 10 time higher power than normal
    • Model TQ-77
    • Voltage 110-130V, 220-240V AC 50/60Hz
    • Power Consumption -High 100W / Low 20W (220-240V model)
    • Insulation Resistance Over 100MΩ (500V DC)
    • Heater Ceramic Heater
    • Power Cord Length 1.5m
    • Length 167mm –
    • Weight 90g
  • Quick View

    Graphical LCD 128×64

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,999.00.
    • Operating Voltage is 5V
    • it is with Chinese font
    • it has a blue backlight
    • Controller used in it ST7920
    • its Size is 93x70mm
    • It displays 20 characters in 4 lines.
    • Its input voltage range is 4.5V to 5.5V.
    • The operating voltage for LCD is 5V Direct Current (DC).
    • Its interface consists of 6800 8 bit parallel.
    • Positive transflective is its display type.
    • Its backlight consists of blue and green.
  • -44%
    Quick View

    LCR T4 Transistor Tester ESR Meter

    (0)
    Original price was: ₨3,600.00.Current price is: ₨1,999.00.

    Specifications:

    Material: Printed circuit board

    Power Mode: 6F22

    Display: 128 * 64 LCD backlight

    Testing Speed: 2 seconds (1 minute is normal for large capacitor)

    Shutdown Current: 20nA

    Displayed Value: 25pf-100mF (resolution 1pF)

    Inductance: 0.01mH-20H

    Resistance: 2100

    Power Volatge: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack

    Resolution of Resistance Measurement: 0.1 ohms

    The Highest Measured Value: 50M ohms

    Provided Testing Current: Approx. 6mA

  • Hot
    -23%
    Mini 2.4 GHz Wireless Keyboard with Touchpad for Raspberry Pi
    Quick View

    Wireless Mini Keyboard 2.4GHz with Touchpad & Mouse

    (0)
    Original price was: ₨2,600.00.Current price is: ₨1,999.00.

    Mini 2.4 GHz Wireless Keyboard with Touchpad for Raspberry Pi Specifications and details

    • Color: Black.
    • LED colors Blue, Red, Green
    • Operating range Up to 32ft
    • Power transmission p + 5db Max.
    • Operating voltage 3.3 V.
    • Operating current <50 mA.
    • Load current <300 mA.
    • Sleep current <1 mA.
    • Windows 2000 / XP / Vista / CE / Win7 / Win8 / Win10 / Linux system requirement
    • Dimensions: 5.71 x 3.94 x 0.39 inches.
  • -43%
    Quick View

    10,000MAH SOLAR POWER BANK WITH 2 X LED TORCH ONLY CASE

    (0)
    Original price was: ₨3,500.00.Current price is: ₨1,999.00.
    • Capacity: 10000mAh
    • Input: DC5.0V-1.0A
    • Output1: DC 5.0V 1.0A (Max)
    • Output2: DC 5.0V 2.1A (Max)
    • Dimensions: 140 x 75 x 20mm
    • Weight: 260g
  • Quick View

    LiPo 11.1V 2200mAH 25C LionPower

    (0)
    ₨2,000.00

    Oriainal Lion Power Lipo Battery 11.1V 2200Mah 25C MAX 40C T Plug for RC Car Airplane Align Trex 450 Helicopter Part

  • -48%
    Quick View

    Stc3028 Digital Temperature And Humidity Controller

    (2)
    Original price was: ₨4,000.00.Current price is: ₨2,099.00.
    • Model: STC-3028
    • Input Voltage: AC110 ~ 220V
    • Measuring Temperature Range: -20  ~ 80
    • Humidity Measurement Range: 00% RH ~ + 100% RH
    • Accuracy: 1 , 0.1% RH
    • Relay Output Contact Power: 10A / 240VAC
    • Material: PC + ABS fireproof
    • Panel size: 75x34mm / 2.95×1.34inch Installation
    • size: 85x70x28mm / 3.35×2.76×1.10inch
    • Cable length: 1m
  • -40%
    Quick View

    GT350D Professional Digital Multimeter

    (0)
    Original price was: ₨3,500.00.Current price is: ₨2,099.00.

    The GT350D Professional Digital Multimeter is a high-precision instrument designed to meet your diverse measurement needs. Whether you’re a professional, hobbyist, electronics enthusiast, or a DIY hobbyist, this multimeter is the perfect tool for you. It has a clear LCD display and a comfortable protective cover with test leads hanging grooves. It has 3. 2 meters drop test and precision protection. Its Loud buzzer sounds reasonable hearing capacity to the user.