STM32F401 Minimum System Development Board Module STM32F401CCU6 STM32F4

STM32F401 Minimum System Development Board Module STM32F401CCU6 STM32F4 kit powers the capabilities of the STM32f4 STM32f407 Discovery Kit high-performance microcontrollers, to allow users to easily develop applications featuring audio. It includes an ST-LINK embedded debug tool, one ST-MEMS digital accelerometer, a digital microphone, one audio DAC with the integrated class D speaker driver, LEDs, push buttons, and a USB OTG micro-AB connector.

STM32F401 Minimum System Development Board Module STM32F401CCU6 STM32F4 Features

• STM32F411CEU6 (100Mhz) with 512KB FLASH & 128KB RAM
• Onboard LDO for 5V to 3.3V DC conversion
• 2x 20 Pin Single Line Header which gives access to all the IOs. The board comes with unsoldered header connectors.
• The header for SWD Programming Interface
• Switches for Reset, Boot Mode, User
• LED for Power and another connected on GPIO(C13)
• 25MHZ high speed crystal, 32.768Khz low speed crystal
• BOOT0 and NRST, releasing NRST to access serial port download, and DFU download, using ST multi-in-one STM32 Cube Programmer burning software.
• Option to solder SPI Memory on the bottom side of the board.
• USB-C type Connector

STM32F401 Minimum System Development Board Module STM32F401CCU6 STM32F4 Interface Description:

• SWD interface: support simulation, download, and debugging
• Micro USB interface: power supply and USB communication, download is not supported
• USART1 interface: USART1 can be used to download programs, or use USART1 for communication
• MCU pin interface: lead out all I/O port pins for easy connection with peripherals
• 5V and 3.3V power input and output interface: often used for external power supply, or common grounding treatment with other modules

Other Equipment Description:

• Power indicator (PWR): The status of the power indicator, which can determine whether the power is stable
• User LED (PC13): Convenient for I/O output testing or indicating program operation
• Start to jump to select programming mode: (1, user flash memory 2, SRAM 3, system memory)
• Reset button: reset the chip for the user program
• 8M crystal oscillator: the frequency can be set to make the system main frequency 72MHz
• 32.768KHz crystal oscillator: can be used for built-in RTC or calibration