-
Raspberry Pi 4 model B 8GB Computer Development Board
Original price was: ₨35,000.00.₨24,999.00Current price is: ₨24,999.00.- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 8GB LPDDR4-3200 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient
-
LiitoKala Lii-500 18650 Smart Battery Charger LCD Display
Original price was: ₨8,000.00.₨5,799.00Current price is: ₨5,799.00.– 4 independent charging channels with built-in micro-computer management system to ensure the high efficiency
– USB output function: Built with 5V / 1000mAh output
– 300mA / 500mA / 700mA / 1000mA charging current for selection
– CC / CV charge mode to maintain a constant current flow and protect battery and users’ safety
– full Fledged LCD display with a variety of info
– Refresh function for 0V battery
– Quick test mode – 4 channels detect the battery capacity quicker than the Nor mode
– Identifies broken batteries, 0V rechargeable battery activation, can’t charge 1.65 – 1.85V batteries
– Protections: over-charge, over-discharge, reverse polarity, short circuit protections, temperature control
– Charging between 1.65 – 2.2V / bad battery recognition and activation
-
UNI-T UT658 USB Tester in Pakistan
Original price was: ₨1,900.00.₨1,499.00Current price is: ₨1,499.00.- Voltage Measurement Range: 3V – 9V
- Current Measurement Range: 0A – 3A
- Voltage Resolution: 0.01V
- Current Resolution: 0.001A
- Capacity Measurement Range: 0mAh – 19999mAh
- Energy Measurement Range: 0mWh – 99999mWh
- LCD Display: 1.44-inch color TFT screen
- USB Compatibility: USB 2.0, USB 3.0
- Overload Protection: Yes
- Operating Temperature: 0°C – 40°C
- Storage Temperature: -10°C – 60°C
- Dimensions: 61mm x 28mm x 14mm
- Weight: Approximately 20g
- Power Supply: Powered by the tested USB device (no external power source required)
-
ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W
Original price was: ₨1,999.00.₨1,399.00Current price is: ₨1,399.00.ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W long- Featherweight iron with pencil handle- Ideal for hobbies, kits and radios- MT1 3mm diameter replaceable nickel-plated copper tip- Develops 750?F/400?C- Stainless steel barrel- Heat and impact resistant handle
-
Adjustable Soldering Iron 80W 220V/110V LCD Digital Display
Original price was: ₨2,000.00.₨1,799.00Current price is: ₨1,799.00. -
LED SMD Strip 5m Size In Green Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00.- Weather-resistant IP65 Adhesive back 3M Brand
- Clear silicone strip 10×2.8mm Total Length 5 Metres
- Can be cut into 50mm lengths with 3 LEDs each.
- 450 Lumens/M, 500mA/M, 60 LEDs/M (per metre)
- LED 5050×300 total. CE, ROHS, and UL certified
- Terminates to two wires. 12Vdc @ 3A Total 5M
- 450 lumens per meter
- 10mm wide x 2.8mm high
-
Encoder Coupling Aluminum Flexible, 5mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00.- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3×8
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 3mmx6mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00.- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3mmx6mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 3mmx5mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00.- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3mmx5mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 4mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00.- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 4mmx8mm
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
Encoder Coupling Aluminum Flexible 3mmx8mm Shaft
Original price was: ₨1,100.00.₨870.00Current price is: ₨870.00.- Material: Aluminum Alloy
- Total Length: 25mm
- Outer Diameter: 19mm
- Shaft: 3×8
- Easy to install, buffer, damping, convenient to disconnect.
- Color: Silver
-
RELAY 6V 10A – 5 PIN PCB
Original price was: ₨90.00.₨79.00Current price is: ₨79.00.Specifications:
- Model Number: SRD-06VDC-SL-C
- Coil Power : 6V DC
- Pin Out: 5 Pin – Coil – COM – NC – NO
- Nominal Coil Power: 0.36w, 0.45W
- Contact Capacity: 10A 250VAC/10A 125VAC 10A 30VDC/10A 28VDC
- Insulation Resistance: 100M-.500VDC
- Operate Time: 15ms/10ms
- Terminal Type: PCB
- Contact Load: High Power
- Product name:: 6V DC Electrical Relay SRD-05VDC-SL-C
- Contact Ratings: 1A,1C
- Contact Resistance: 100m (at 10A 5VDC)
- Contact Material: Silver Alloy
- Size: Miniature
- Protect Feature: Sealed
-
5A 12V Mini Car Battery Charger with Ce RoHS (SON-1205B)
Original price was: ₨999.00.₨819.00Current price is: ₨819.00.- Positive and negative pole clamp connector
- Suspension wear mouth
- Cooling air outlet
- Work indicating lamp
- Electric plug
- Cheaper price version compared with SON-1205
-
BUCK CONVERTER STEP DOWN MODULE 200W 15A
Original price was: ₨1,620.00.₨1,450.00Current price is: ₨1,450.00.- Name: Step down 15A 200W adjustable synchronous buck module
- Type: Non-isolated step-down module (BUCK)
- Aluminum housing Size: 70x38x31mm / 2.75 “x1.5” x1.2 “
- Input voltage: 8-55V (limit 60V, please leave allowance)
- Output voltage: 1-36V continuously adjustable (the default output 12V)
- Output Current: 10A MAX15A normal
- Output power: natural cooling ventilated long-term power 100W
- To enhance heat dissipation up to 200W
- Such as long working hours, please note the left margin and make the heat rise
- Operating temperature: -10 to +85 degrees
- Operating frequency: 180KHz
- Conversion efficiency: up to 94%
- Overcurrent protection: Yes (the output current exceeds (15A) current maximum sample protection only)
- Reverse polarity protection: (reverse does not burn)
- Wiring: high current terminals, solderless, IN + input is positive, IN- is the input negative, OUT + positive output, OUT- output negative
-
Analog Timer H3BA-8 24VDC Timer Relay
Original price was: ₨2,550.00.₨1,899.00Current price is: ₨1,899.00. -
MY2 MY-2Hh54p 14pin 4no4nc 6 Volt Relay DC AC 220V Relay
Original price was: ₨750.00.₨550.00Current price is: ₨550.00. -
PR12 4DP Proximity sensor Autonics
Original price was: ₨999.00.₨799.00Current price is: ₨799.00.Sensing distance
1.5mmInstallation
Shield(flush)Standard sensing target
8×8×1mm(iron)Response frequency
1.5kHzCurrent specification
Current consumption: Max. 10mAControl output
PNP Normally OpenMaterial
Brass(nickel plated)Cable Standard/material
Standard cableBody length
Standard typeWeight
Approx. 64g (approx. 52g) -
PR08-2DP Inductive Proximity Sensor
Original price was: ₨999.00.₨769.00Current price is: ₨769.00.- Wire type and power
- DC 3-wire type 12-24VDC Sensing side diameter
- M08Sensing distance 2mm
- Installation Non-shield(non-flush)
- Standard sensing target8x8x1mm(iron)
- Response frequency1kHzCurrent specification
- Current consumption: Max. 10mA
- Control output PNP Normally Open Material Brass(nickel plated)
- Cable Standard/material Standard cable
- Protection structureIP67
- Approval Body length Standard type
- Environment Ambient temperature-25 to 70C, storage: -30 to 80C
- Environment Ambient humidity35 to 95% RH, storage: 35 to 95% RH
- Hysteresis(distance)Max. 10% of sensing distance
- Residual voltage Max. 2V
- Weight Approx. 64g(approx. 52g)
-
SPO2 MAX30102 Blood Oxygen Concentration Sensor
Original price was: ₨1,200.00.₨499.00Current price is: ₨499.00.- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Free Algorithm
- Highly integrated, small-size sensor
- Non-chest based heart-rate/SpO2 detection
- Ultra-low power consumption
-
Raspberry Pi GPIO Expension Board
Original price was: ₨3,599.00.₨1,969.00Current price is: ₨1,969.00. -
MONSTER MOTO SHIELD DUAL VNH2SP30 16V 30A
Original price was: ₨1,300.00.₨1,259.00Current price is: ₨1,259.00.- Power supply: Max 16V
- Max current rating: 16A
- Practical Continuous Current: 14A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 m OHM (per leg)
- Maximum PWM frequency: 20kHz
- Thermal Shutdown
- Under-voltage and Over-voltage shutdown.
-
125KHz EM18 reader module EM-18 build in coil antenna
Original price was: ₨2,150.00.₨1,499.00Current price is: ₨1,499.00.- Operating voltage of EM-18: +4.5V to +5.5V
- Current consumption:50mA
- Can operate on LOW power
- Operating temperature: 0C to +80C
- Operating frequency:125KHz
- Communication parameter:9600bps
- Reading distance: 10cm, depending on TAG
- Integrated Antenna
-
Interfacing EMG Muscular Signal Sensor
Original price was: ₨6,000.00.₨4,499.00Current price is: ₨4,499.00.Features:
- Small Form Factor
- Specially Designed for Microcontrollers
- Adjustable Gain using onboard potentiometer
- 5mm Connector
Applications:
- Video games
- Robotics
- Medical equipment
-
12V 3.3A DC Power Adapter
Original price was: ₨499.00.₨340.00Current price is: ₨340.00.- 12VDC Power
- 3300mA (3.3 Amps)
- Plug-In Class 2 Transformer
- UL/CE Listed Adapter
- 110/120VAC to 12VDC Adapter
- DC Jack 2.1mm ID, 5.5mm OD
-
6V DC Micro Gear Motor 56 RPM Gearhead Motor
Original price was: ₨600.00.₨420.00Current price is: ₨420.00.Specifications:
Model: GM12-N20
Material: Alloy Gear
Rated Voltage: DC 6.0V
No Load
Speed: 56RPM
Current: 50mA
With Maximum Efficiency
Speed: 40RPM
Current: 150mA .
Torque: 73.5 mN.m (26.46 oz)
Stall
Torque: 6.6 lbs.cm
Current: 0.6A
Size: 0.394 x 0.433 x 1.378 in.
-
37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
Original price was: ₨3,000.00.₨2,599.00Current price is: ₨2,599.00.This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
-
Atmel Attiny85 Attiny-85 ATtiny85-20PU
Original price was: ₨1,200.00.₨1,099.00Current price is: ₨1,099.00.Features of ATtiny85 Microcontroller:-
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
- Package – SMD
-
Soldering Iron Vhan 40W Solder
Original price was: ₨400.00.₨330.00Current price is: ₨330.00.Soldering Iron Vhan 40W Solder
- AC 220V Soldering Iron
- 40W Element
- Quick Heating Smooth Soldering
- 1 Meter Electric Wire
- Best for:
- Circuit Board Designing
- DIY Projects
- School, Home use
- Plastic Welding etc
-
-
1500W 30A CONVERTER STEP UP POWER SUPPLY MODULE
Original price was: ₨4,999.00.₨4,299.00Current price is: ₨4,299.00.When using the boost power supply should pay attention to the following points:
1. the output polarity cannot be reversed or short circuit.
2. when using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply
3. Input power supply voltage must be above 10V.
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded. Then pick up the load. (must ensure that the switching power supply has been working).
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current,the circuit structure of the boost module can not be adjusted in short circuit way.
6. If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant, it is to ensure that input is lower than the output voltage.
-
ABS Enclosure Black Case for Raspberry Pi with Heat Sink And 5v Fan
Original price was: ₨2,000.00.₨1,099.00Current price is: ₨1,099.00.This Raspberry case is made of ABS material. It can be perfectly compatible with Raspberry Pi 4B. Considering the high power consumption cost of Raspberry Pi 4B, the Raspberry case has room to add a fan (35x35x10mm) and general copper/aluminum heatsink (up to 6mm) for heat dissipation. What’s more The case supports the GPIO PINs of the Raspberry Pi 4B and connects external devices like Raspberry Pi Hat outside the case by cables. Also, the ventilation openings are designed on the top and bottom of the case to keep cooling.
-
Arduino UNO R3 Enclosure Transparent Clear Case
Original price was: ₨350.00.₨299.00Current price is: ₨299.00.- To protect your little computer against damages, dust, and scratches Clear Top and Bottom.
- This case provides easy access to all ports
- It requires no tools for easy assembly and disassembly
- Simply Clicks Together Enclosure
- This case is a beautiful yet simple way to show off your UNO!
-
7th gen Electric vehicle throttle electric motorcy
Original price was: ₨2,000.00.₨1,899.00Current price is: ₨1,899.00. -
DIY Kit Remote Control Boat STEM Kit
Original price was: ₨1,000.00.₨840.00Current price is: ₨840.00. -
STEM DIY Home house construction light house model
Original price was: ₨1,050.00.₨940.00Current price is: ₨940.00. -
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer Module
Original price was: ₨520.00.₨480.00Current price is: ₨480.00.- Wide analog input voltage range from -5 V to +5 V
- Complies with JEDEC standard no. 7A
- Low ON resistance:
- 80 ohm(typical) at VCC -VEE = 4.5 V
- 70 ohm(typical) at VCC -VEE = 6.0 V
- 60 ohm(typical) at VCC -VEE = 9.0 V
- Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
- Typical break before make built-in
- ESD protection:
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101E exceeds 1000 V
- Multiple package options
- Specified from -40 to +85 and -40 to +125
-
SUDER Soldering Iron 30W With Soldering Flux Soldering Wire Vectra 50g Soldering Foam
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. -
Raspberry Pi 4 2GB with Free Wireless Pi Keyboard
Original price was: ₨50,000.00.₨29,999.00Current price is: ₨29,999.00.Raspberry Pi 4 is a completely upgraded, re-engineered Faster, more powerful computer from the family of very well know and our most favorite Raspberry Pi Foundation. This is the first time Raspberry Pi is offering a choice of memory capacities.
This offer is for a limited time raspberry pi 4 2GB with the free wireless Pi keyboard. Raspberry pi all variants are available on our store Electronation.
-
Jetson Nano 2GB
Original price was: ₨17,009.00.₨13,607.00Current price is: ₨13,607.00.Discover the power of AI and robotics with the NVIDIA Jetson Nano 2GB Developer Kit. It’s small, powerful, and priced for everyone.
-
ESP8266 Witty Cloud ESP-12F WiFi Module
Original price was: ₨1,099.00.₨899.00Current price is: ₨899.00.- LDR Light Sensor on board.
- WS2812 Led on board.
- Includes CH340G USB-to-UART programmer.
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
- Supports 3 modes: AP, STA, AP+STA.
- Dimensions: 24mm x 16mm.
- Micro USB connection for power and/or programming
-
iMAX B6 AC/DC Version 80W Lipo Balance Charger/Discharger
Original price was: ₨10,000.00.₨8,999.00Current price is: ₨8,999.00.- Operating voltage range: DC 11.0-18.0 Volt; AC in 100-240V, 50/60Hz
- Circuit Power: MAX. charge power 50W ; Max. discharge power 5W
- Charge current range: 0.1-5.0A
- Discharge current range: 0.1-1.0A
- Current drain for balancing LiPO: 300mAh/cell
- NiCd/NiMH: 1-15 cell
- Li-ion/Polymer: 2-6 series
- Pb battery voltage: 2V-20V
- Weight: 580 g
- Dimension: 133mm x 87mm x 33mm
-
Extruder Kit With NEMA 17 Stepper Motor
Original price was: ₨6,500.00.₨4,999.00Current price is: ₨4,999.00.Buy Nema 17 with MK8 Aluminum Extruder Kit At electronation in best price
-
Ph Sensor Gravity Sensor Module
Original price was: ₨7,800.00.₨5,999.00Current price is: ₨5,999.00.- Module Power: 5.00V
- Module Size : 43 x 32mm(1.69×1.26″)
- Measuring Range :0 – 14PH
- Measuring Temperature: 0 – 60 ℃
- Accuracy : ± 0.1pH (25 ℃)
- Response Time: ≤ 1min
- pH Sensor with BNC Connector
- pH2.0 Interface ( 3 foot patch )
- Gain Adjustment Potentiometer
- Power Indicator LED
-
LED light 12V 6inch (casing)
Original price was: ₨150.00.₨99.00Current price is: ₨99.00.High quality casing in minimal cost.
-
24 V DC Brushless Fan (60x60x25 mm)
Original price was: ₨315.00.₨252.00Current price is: ₨252.00.Features:
- Size: 60 x 60 x 25mm (W x H x D)
- Voltage: 24 VDC
- Current: 80 mA
- Power: 1.9 Watts
- Air Flow: 17 CFM
- Noise: 16.1 dBA




































































