-
-36%
- Standard Socket: E10
- Lamp Type: Incandescent Lamp
- Size: 24*11mm
- Colour temperature: Yellow
- Polarity: No
-
-43%
This clear double-side tape is a double-coated film, consisting of an acrylic adheisve with extremely high adhesion power and high instant tack. Light and moisture resistant. Permanently bonds plastics and metals. Replaces epoxies and other adhesives.?Clean, dry surface is required for maximum bond strength.
-
-18%
- HEX Inverter
- Logic Gate IC
- Not Gate | Inverter
- 7404
- SN74HC04N same as SN74LS04N
- IC 04 IC04
-
-18%
A flip flop is a device that is able to store single bit of data. It is either one or zero, off or on in this case. It is able to store data over a prolonged period of time. There are many applications of 74HC374 Flip Flop IC.
-
-18%
- Identical in Function to the 74LS93 with Different Pin Arrangement
- Contains Four Master-Slave Flips-Flops together with a Binary Counter
- Gated Zero Reset
- Fast Propagation Speeds
- Low Power Dissipation
-
-15%
This device contains four independent gates each of which performs the logic exclusive-OR function.
-
-19%
This laser pointer or laser pen is a small handheld device with a laser diode emitting a very narrow coherent low-powered laser beam of visible light, it is frequently used in lecture halls and demonstrations to point at topics of interest on a presentation board. In a school setting, they have become ubiquitous, and they are very useful teaching aids.
-
-16%
- Logic Type: INVERTER / NOR / NAND
- Output Current: 6.8mA
- Supply voltage range: 3V to 18V
- Package Type: DIP
- Pin number: 14
- Operating temperature range: -55 ° C to +125 ° C
- Surface Mount Devices: through-hole mounting
-
-41%
- Technology Family: LS
- Rating: Catalog
- Supply voltage: 1.0V to 5.5V
- Frequency at nominal voltage: 35 MHz
- Typical propagation delay: 21nS
- Low power consumption: 32mW
- Operating temperature: -40ºC to +125ºC
- ESD protection
- Balanced propagation delays
- Designed specifically for high speed
- Channels (#): 1
- Configuration: 3:8
- Product type: Standard
-
-33%
- Technology Family: CD4000
- VCC (Min) (V): 3
- VCC (Max) (V): 18
- Channels (#): 4
- Inputs per channel: 2
- IOL (Max) (mA): 6.8
- IOH (Max) (mA): -6.8
- Input type Standard: CMOS
- Output type: Push-Pull
- 5V–10V–15V parametric ratings
- Symmetrical output characteristics
- Speed: (tpd > 50ns)
- Data rate (Max) (Mbps): 8
- Rating: Catalog
- Operating temperature range (C): -55 to 125
-
-11%
SN74125 Buffer & Line Driver IC
Original price was: ₨55.00.₨49.00Current price is: ₨49.00. Quick View- Technology Family: LS
- VCC (Min): 4.75V
- VCC (Max): 5.25
- Channels (#): 4
- Operating Voltage (Nom): 5V
- Frequency at normal voltage (Max): 35MHz
- Propagation delay (Max): 20ns
- IOL (Max): 24mA
- IOH (Max):-2.6mA
- Input Type: Bi-polar
- Output type: 3-State
- High speed (tpd 10-50ns)
- Rating: Catalog
- Data rate: 70Mbps
- Available in 14-pin PDIP, GDIP, PDSO packages
-
-28%
SN74HC241 Buffer & Line Driver IC
Original price was: ₨250.00.₨180.00Current price is: ₨180.00. Quick ViewThese octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The HC241 devices are organized as two 4-bit buffers/drivers with separate output-enable (1OE and 2OE) inputs. When 1OE is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs for the respective buffers/drivers are in the high-impedance state.
-
-22%
Out Of StockThe HEF4104B is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high voltage circuits. For example low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high voltage LOCMOS. It has four data inputs (A0 to A3), an active HIGH output enable input (OE), four data outputs (B0 to B3) and their complements (B0 to B3).
-
-18%
MPU9250 IMU 9DOF MPU-9250
Original price was: ₨2,000.00.₨1,650.00Current price is: ₨1,650.00. Quick View- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
- Accelerometer full-scale range of 2g, 4g, 8g, and 16g
- Magnetometer full-scale range of 4800T
- I2C and SPI serial interfaces
- Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
- Power supply: 3-5v
-
-46%
Lithium Battery 3S 12V 10A Charge Protection Board BMS
Original price was: ₨350.00.₨189.00Current price is: ₨189.00. Quick View- Model: 3S 10A BMS
- Size: 50 * 16 * 1.0mm
- Short circuit protection: protection, self-recovery delay.
- Input voltage: 12.6V
- Over-charge voltage range: 4.25-4.35v 0.05v
- Over-discharge voltage range: 2.3-3.0v 0.05v
- Maximum operating current: 5-8A
- Overload voltage range: 4.25-4.35 v 0.05 v
- Overpressure voltage range: 2.3-3.0 v 0.05 v
- Maximum instantaneous current: 9-10A
- Operating temperature: -40 — +50
- Storage conditions: -40 — +80
- Quiescent current: less than 6uA
- Internal resistance: less than 60m
-
-65%
3S 20A BMS Module for Lithium Batteries
Original price was: ₨480.00.₨169.00Current price is: ₨169.00. Quick View- Charging voltage: 12.6 V-13 V
- Overvoltage range: 4.25-4.35 V 0.05 V
- Overvoltage range: 2.3-3.0 V 0.05 V
- Maximum operating current: 5A-6A
- Upper instantaneous current limit: 8A
- Current: less than 30uA
- Internal resistance: less than 45 M
- Service life: more than 50000 hours
- Operating temperature: -40 to + 50 degrees
- Storage conditions: -40 to + 80 degrees
- Size: 50 * 16 * 1 mm
- Protection against short circuit: protection, self-healing delay
-
-50%
TP4056 Lithium Battery 18650 Charger Module Micro USB
Original price was: ₨110.00.₨55.00Current price is: ₨55.00. Quick View- The current is approximately 1A adjustable.
- Charge precision is 1.5%.
- Input voltages are between 4.5V-5.5V.
- Full charge voltages are 4.2V.
- Led indicators are – red is charging and Green is full charged.
- Input interface consists of micro USB & welding points
- Work temperature is between -10° to +85°.
- No Reverse polarity protection
- Size- small to 25X19X10mm.
-
-31%
- Photosensitivity is high
- Response time is fast
- Simple to use
- Sensitivity is adjustable
- Detection angle is 600,
- It is responsive to the flame range.
- Accuracy can be adjustable
- Operating voltage of this sensor is 3.3V to 5V
- Analog voltage o/ps and digital switch o/ps
- The PCB size is 3cm X 1.6cm
- Power indicator & digital switch o/p indicator
- If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
-
-52%
BMS 3S 40A Li-Ion Lithium Charger Protection Board
Original price was: ₨600.00.₨289.00Current price is: ₨289.00. Quick View- Condition: New
- Model Number: 3S 40A Li-ion Lithium Charger Protection Board
- Type: Voltage Regulator
- Application: For Drill Motor
- Color: green
- Material: PC + metal
-
-30%
- 3.3-5.5V Input
- 1-1.5mA measuring current
- 40-50 uA standby current
- Humidity from 0-100% RH
- -40-80C Temperature Range
- +-2% RH accuracy
- +-0.5 degrees C
-
-20%
- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
-
-20%
BMP180/GY68 Pressure Sensor
Original price was: ₨300.00.₨239.00Current price is: ₨239.00. Quick View- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
- Size: 13mm x 10mm
-
-41%
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
-37%
Propeller 1045 are helicopter rotors of 10 inches length, Slope 4.5 inch. Single propellor weighs 7g.
-
-25%
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
Original price was: ₨800.00.₨599.00Current price is: ₨599.00. Quick ViewD1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.
-
-17%
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
-20%
A2212 – 1400KV BLDC Brushless Motor
Original price was: ₨1,800.00.₨1,449.00Current price is: ₨1,449.00. Quick View- KV: 1400
- No-load Current : 10 V : 0.5 A.
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 934;3.17mm
- Shaft diameter: 3.175mm.
- Minimum ESC Specification: 18A (30A Suggested)
- Thrust @ 3S with 1045 propeller: 1000gms approx.
- Thrust @ 3S with 0945 propeller: 650gms approx.
- Thrust @ 3S with 0845 propeller: 550gms approx
-
-5%
Pulse Sensor Heart Rate Sensor
Original price was: ₨450.00.₨429.00Current price is: ₨429.00. Quick View- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625
- Thickness: 0.125 Thick
-
-29%
Out Of StockAlso known as omni wheels or ilon wheels. It consist of a hub of rollers oriented 45 degree to the axis of rotation. It can move forward, backwards, side to side and even rotate.
-
-6%
Out Of StockTB6600 Arduino Stepper Motor Driver 4A, 5A
Original price was: ₨1,800.00.₨1,699.00Current price is: ₨1,699.00. Quick View- This stepper motor driver supports 8 kinds of current control.
- This stepper driver supports 7 kinds of micro-steps adjustable.
- Stepper motor driver interface adopts high-speed optocoupler isolation.
- It has the feature of automatic semi-flow to reduce heat.
- It has a large area heat sink.
- It has anti-high-frequency interference ability.
- It has input anti-reverse protection
- It has the feature of overheating, over-current, and short circuit protection.
-
-20%
GY-273 HMC5883L Triple-axis Magnetometer Compass Module
Original price was: ₨750.00.₨599.00Current price is: ₨599.00. Quick View- Type: GY-271
- Operating Voltage : 3 -5 V DC.
- Chipset: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
- Dimensions : 14.8 x 13.5 x 3.5 mm.
- Weight: 2 gm.
- 3-axis magnetic electronic compass.
- Precise heading information.
- Fits into small projects easily.
- I2C communication.
-
-7%
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
-
-33%
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00. Quick ViewProximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
-
-53%
- The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
- 318 temporary data storage RAM
- Working current of 2.0V, less than 300nA
- Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
- 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
- Simple 3 wire interface
- Compatible with TTL Vcc=5V
- Double power supply pipe for main power and backup power supply.
-
-6%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -20A~ 20A
- Sensitivity: 100mV/A
- The current sensor chips: ACS712_ELC-20A.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
- The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
-
-10%
Out Of StockBreadboard Power Distribution
Original price was: ₨890.00.₨799.00Current price is: ₨799.00. Quick ViewThe breadboard provides two columns for power distrubution. The power distrubution columns are marked with polarities so that it is easy for the user to connect power supply probes.
-
-43%
- 3.3V & 5.0V operations for DDWRT support on different voltage system
- Standard USB type A male and TTL 6pin connector.
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real-time
- Works with existing COM port PC applications. Ready for Windows 8/7/Vista/Server 2003/XP/2000/CE
- Plastic coating protection from standard wear and tear.
- Size: 52mm X 15.5mm x 6.5mm (L x W x H).
-
-14%
Out Of StockEsp Adaptor with Temp Sensor
Original price was: ₨640.00.₨550.00Current price is: ₨550.00. Quick ViewESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
-
-16%
Camera Ribbon for Raspberry Pi Camera
Original price was: ₨650.00.₨549.00Current price is: ₨549.00. Quick ViewIt is an RaspberryPi compatible camera module. This module can be used for camera applications in raspberryPi like live Image processing, Obstacle Detection through an Image.
-
-19%
GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Original price was: ₨490.00.₨399.00Current price is: ₨399.00. Quick ViewA 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
-
-40%
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
-12%
HC-SR501 PIR Human Motion Sensor
Original price was: ₨260.00.₨229.00Current price is: ₨229.00. Quick View- Wide range on input voltage varying from 4.V to 12V (+5V recommended)
- Output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operating modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
-
-10%
4 Way IR Line Tracking / Following Sensor Module
Original price was: ₨490.00.₨439.00Current price is: ₨439.00. Quick View- Operating Voltage: 3.3-5V
- Fixing Screw Hole: M3
- Distance setting from 1mm to 10cm
- Control Card Dimensions: 42x38x12mm
- Sensor Dimensions: 25x12x12mm
- Card Output: Digital
-
-25%
This is the SMD RGB LED Common Cathode Module, These module has 3 separate LEDs the Red, Green and Blue which can be individually driven by applying a voltage to the appropriate module pin this example code is uses the Arduino analogWrite(PWM) function to cycle through the full possible output colors this smd led module is capable of producing a rainbow color scheme.
-
-45%
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
-13%
- Operating frequency: 125 kHz
- Baud rate: 9600
- Interface: TTL level RS232 format
- Working voltage: DC 5V
- Working current: <50mA
- Receive distance: 20~50mm
- Dimension (mm): 38.5 x 20
- Weight: 7g
-
-12%
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
-49%
Soil Moisture Sensor For Arduino
Original price was: ₨350.00.₨179.00Current price is: ₨179.00. Quick View- Easy-to-use
- 3-pin screw pin terminal is pre-soldered to the board
- PCB coated in gold finishing
- 3.3V to 5V operating supply voltage range