-
CD4073 Triple 3 Input AND Gate IC
₨79.00- High-Voltage Types (20V Rating)
- CD4073BMS Triple 3-Input AND Gate
- CD4081BMS Quad 2-Input AND Gate
- CD4082BMS Dual 4-Input AND Gate
- Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
-
14 Pin – DIP IC Socket/Base
₨10.0014 Pin – DIP IC Socket/Base IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
IRF244 N-Channel MOSFET Transistor
₨49.00- Package Type: TO-220
- Transistor Type: N Channel
- Max Voltage Applied From Drain to Source: 55V
- Max Gate to Source Voltage Should Be: 20V
- Max Continues Drain Current is : 49A
- Max Pulsed Drain Current is: 160A
- Max Power Dissipation is: 94W
- Minimum Voltage Required to Conduct: 2V to 4V
- Max Storage & Operating temperature Should Be: -55 to +170 Centigrade
-
Variable resistor 20K
Original price was: ₨50.00.₨39.00Current price is: ₨39.00.A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
Ramps 1.4 Shield
Original price was: ₨853.00.₨800.00Current price is: ₨800.00.- Supply Voltage : 12 V
- Fused at 5A for additional safety and component protection
- Heated bed control with additional 11A fuse
- Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
- I2C and SPI pins left available for future expansion.
- 2 stepper motor for Z axis in parallel.
-
NRF24L01 Antenna Pair
Original price was: ₨799.00.₨599.00Current price is: ₨599.00.This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
-
Infrared receiver KY-022
Original price was: ₨200.00.₨169.00Current price is: ₨169.00.- Voltage: 3.3V to 5V
- Characteristics: 700nm x 1mm
- Chipset: TSOP1838 37.9kHz
- Daylight Rejection: up to 500LUX
- Receiving Distance: up to 18 m
- Size: 19mm x 15mm x 14mm
-
Loadcell 10kg
Original price was: ₨450.00.₨399.00Current price is: ₨399.00.- Rated Load: 10Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
- Output Impedance: 1000±10% Ω
- Maximum working voltage: 15V DC
- Operating temperature range: -20~60°C
- Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L X W X H)
-
Zener Diode 6V
Original price was: ₨15.00.₨9.00Current price is: ₨9.00.- Supply Voltage: 1N5340 6V
- Type: Low Power Switching Zener Diode
- Package: DO-15
- Diode Configuration: Single
- Zener Voltage Tolerance: 5%
- Package Type: Through Hole
- Dissipation Power: 5W
- Dimensions: 10.7 x 7 x .1cm
- Operating Temperature: -65°C to 200°C
-
E3f-ds30c4 – Photoelectric Switch Sensor Pnp
Original price was: ₨3,000.00.₨1,199.00Current price is: ₨1,199.00.E3F-DS30C4 M18 Diffuse Reflection Photoelectric Switch Sensor 3 Wires NPN NO DC 10-30VDC 200mA 30cm Adjustable in Pakistan.
-
Veroboard Vero Board Single Side Large Breadboard Style
Original price was: ₨300.00.₨199.00Current price is: ₨199.00.Project Board / Vero board / prototyping board Size = 14.5cm x 6.5cm
we can use for any electronics projects.
-
Magic Depoxy
Original price was: ₨140.00.₨89.00Current price is: ₨89.00.- Content: 460 g
- Color: Black/Gray
- Price: Inclusive of All taxes
- 5 minutes jointing
-
7486 OR Gate IC
Original price was: ₨65.00.₨55.00Current price is: ₨55.00.This device contains four independent gates each of which performs the logic exclusive-OR function.
-
MPU9250 IMU 9DOF MPU-9250
Original price was: ₨2,000.00.₨1,650.00Current price is: ₨1,650.00.- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
- Accelerometer full-scale range of 2g, 4g, 8g, and 16g
- Magnetometer full-scale range of 4800T
- I2C and SPI serial interfaces
- Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
- Power supply: 3-5v
-
Rotary Encoder Module
Original price was: ₨250.00.₨199.00Current price is: ₨199.00.- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
-
Vibration Sensor SW-420
Original price was: ₨200.00.₨119.00Current price is: ₨119.00.- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
Pulse Sensor Heart Rate Sensor
Original price was: ₨450.00.₨429.00Current price is: ₨429.00.- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625
- Thickness: 0.125 Thick
-
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00.Proximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
-
LM393 Microphone Amplifier
Original price was: ₨300.00.₨259.00Current price is: ₨259.00.- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
-
ACS712 Current Sensor 5A
Original price was: ₨320.00.₨299.00Current price is: ₨299.00.- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
-
1S 800mA battery
Original price was: ₨750.00.₨550.00Current price is: ₨550.00.800mAh rating high discharge LiPo battery
-
L298-Mini
Original price was: ₨350.00.₨299.00Current price is: ₨299.00.1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm -
USB Security Tester LCD Display
Original price was: ₨1,000.00.₨699.00Current price is: ₨699.00.USB tester is a unique product which can be used to test the voltage and current levels of a system or a USB based circuit.
-
BF495
₨29.00- Package Type: TO-92
- Transistor Type: NPN
- Max Collector Current(IC): 30mA
- Max Collector-Emitter Voltage (VCE): 20V
- Max Collector-Base Voltage (VCB): 30V
- Max Emitter-Base Voltage (VBE): 5V
- Max Collector Dissipation (Pc): 300 Milliwatt
- Max Transition Frequency (fT): 120 MHz
- Minimum & Maximum DC Current Gain (hFE): 35 to 125
- Max Storage, Operating & Junction temperature range: -65 to +150 Centigrade
-
OPTOCOUPLER 817 QUAD
₨70.00Optocoupler 817 QUAD contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA.
-
LM317T LM317 1.5A VOLTAGE RANGE ADJUSTABLE IC TO-220
₨45.00The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.
-
LF33CV
Original price was: ₨120.00.₨99.00Current price is: ₨99.00.The LF33CV is a very low drop voltage regulator. It has an output voltage of 3.3 V and a output current of 500 mA. Input voltage range 2.5V to 16V. It is suitable for low noise, low power applications and specially in battery powered systems.
-
Relay 6V 5 pin
Original price was: ₨85.00.₨69.00Current price is: ₨69.00.- Model Number: SRD-06VDC-SL-C
- Coil Power : 6V DC
- Pin Out: 5 Pin – Coil – COM – NC – NO
- Nominal Coil Power: 0.36w, 0.45W
- Contact Capacity: 10A 250VAC/10A 125VAC 10A 30VDC/10A 28VDC
- Insulation Resistance: 100M.500VDC
- Operate Time: 15ms/10ms
- Terminal Type: PCB
- Contact Load: High Power
- Product name:: 6V DC Electrical Relay SRD-05VDC-SL-C
- Contact Ratings: 1A,1C
- Contact Resistance: 100m (at 10A 5VDC)
- Contact Material: Silver Alloy
- Size: Miniature
- Protect Feature: Sealed
-
TowerPro MG995 Plastic Gear Servo Motor
Original price was: ₨950.00.₨899.00Current price is: ₨899.00.MG995 MG-995 Metal Gear Servo Motor Tower Pro-360 Degree comes complete with 30cm wire and 3 pins S type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. This high-speed standard servo can rotate approximately 360 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so its great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.
-
Power Module for APM 2.8 and quadcopters
Original price was: ₨2,500.00.₨1,799.00Current price is: ₨1,799.00.Power Module for APM 2.8 and quadcopters is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft’s own ESC/BEC for that.
-
IMAX B3 AC Compact Balance Charger
Original price was: ₨1,899.00.₨1,399.00Current price is: ₨1,399.00.Imax RC B3 Compact Charger SPECIFICATION:
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery
-
Microphone Amplifier – MAX9814 w/ Auto Gain Control
Original price was: ₨800.00.₨449.00Current price is: ₨449.00.- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
-
UT685B KIT TDR Cable Tester in Pakistan – Advanced Wire Tracker & POE Detector
Original price was: ₨45,000.00.₨29,999.00Current price is: ₨29,999.00.The UT685B KIT TDR Cable Tester in Pakistan is a professional-grade Uni-T cable tester designed for accurate network cable testing, fault locating, and POE detection. With advanced TDR technology, it delivers cable length testing up to 500m with ±4% accuracy, making it one of the best cable testers in Pakistan for electricians, telecom engineers, and IT specialists.
-
PZEM-022 CT 100A AC Digital Display Power Monitor Meter
Original price was: ₨4,500.00.₨2,999.00Current price is: ₨2,999.00.-
Operating Voltage: 80–260V AC
-
Measurement Current Range: 0.02–100A
-
Power Range: 0.5W–22,000W
-
Energy Range: 0–999kWh
-
Frequency Range: 45–65Hz
-
Power Factor Range: 0.00–1.00
-
Measurement Accuracy: Class 1.0
-
Nominal Power: 100A / 22000W
-
-
EdSTEM Home Edison robots and EdCreate kit
Original price was: ₨40,000.00.₨31,999.00Current price is: ₨31,999.00.Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
-
DALY 7S 24V 100A Li-Ion BMS – Smart Battery Management with Balance, Cooling & Protection
Original price was: ₨25,000.00.₨10,199.00Current price is: ₨10,199.00.-
Supports 7-cell (7S) Li-Ion battery packs – ideal for 24V systems
-
100A continuous current rating, with surge support up to 150–300A
-
Advanced thermal management with heat sinks and fan-ready design
-
Automatic cell balancing (100mA passive balancing) ensures voltage uniformity
-
Overcharge, over-discharge, overcurrent, short-circuit, and temperature protection
-
Optional Bluetooth, CAN, UART, or WiFi modules for real-time monitoring
-
Waterproof, dustproof, and vibration-resistant casing
-
Low standby current for improved energy efficiency
-
Certified for safety and durability (ISO, FCC, CE, RoHS, etc.)
-
-
DALY 4S 12V 50A BMS with NTC Sensor – Advanced LiFePO4 Battery Protection Board
Original price was: ₨8,000.00.₨4,699.00Current price is: ₨4,699.00.- Model Number: DL4S
- For LiFePO4 Battery Pack
- Battery series: 4S
- Temperature Sensor: Yes
- Overcharge protection: Yes
- Over-discharge voltage: Yes
- Short circuit protection: Yes
- Balance function: Yes
- Accessory: Free cable
- Water proof: Yes
-
Bi Directional Communication Data Rs232 To Rs485 Serial Converter Stm485s
Original price was: ₨1,550.00.₨999.00Current price is: ₨999.00.- Interface: Compatible with EIA /TIA RS-232C Standard and RS-485 Standard
- Electronic interface: At the side of RS-232 is a DB9 female (Hole-type) connector. At the side of RS-485 is DB9 Male (Needle-Type) Connector, with a connection board.
- Working mode: Asynchronous, half-duplex, differential transmission.
- Transmission media: Twisted pair or shielded twisted pair (STP)
- Transmission rate: 300-115200bps
- Telecommunications protocol: Transparent
- Mechanical dimension: 95mm x 33mm x 17mm
- Transmission distance: 1200m (RS-485), 5m (RS-232)
- Working environment: -10 degrees Celsius to 85 degrees Celsius, relative humidity: 5% to 95%
- Signals: RS-232 232: TXD, RDX, RTS, CTS, DTR, DSR, DCD, GND; RS-485: Data, Data-, GND
-
Schneider 2 Pole 63A DC 1000V Circuit Breaker Direct Current Fuse for Solar Panel Protection
Original price was: ₨4,650.00.₨2,899.00Current price is: ₨2,899.00.- Brand: Schneider Electric
- Model: 2-Pole DC Circuit Breaker
- Rated Current: 63A
- Rated Voltage: 1000V DC
- Poles: 2-Pole
- Breaking Capacity: 6kA
- Trip Type: Thermal Magnetic
- Frequency: DC (Direct Current)
-
Tower Pro MG-945 Digital High-Speed Servo
Original price was: ₨950.00.₨750.00Current price is: ₨750.00.- Weight: 55g
- Dimensions: 40.7 x 19.7 x 42.9 mm
- Torque: 10kg/cm (4.8V), 12kg/cm (6.6V)
- Operating Voltage: 4.8V – 6.6V
- Speed: 0.23 sec/60°
- Temperature Range: 0°C to 55°C
- Material: High-strength metal gears
- Connector Type: “S” type (compatible with Futaba, JR, Hitec, GWS, and more)
- Idle Current Draw: 10mA
- No-load Current Draw: 170mA
- Stalled Current Draw: 1200mA
- Wire Length: 32cm
- Dead Bandwidth: 1 microsecond
-
10A/1A Induction current sensor SCT-013-010 (1V)
Original price was: ₨1,800.00.₨1,149.00Current price is: ₨1,149.00.- Current measurement range: 0 ÷ 10 A AC
- Maximum diameter of the measuring cable: fi 12 mm
- Built -in burdening resistor: Yes
- Output voltage: 0 ÷ 1 V AC
- cable length: 1 m
- mass: 50 g
-
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
Original price was: ₨2,000.00.₨1,299.00Current price is: ₨1,299.00.- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
-
3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit
Original price was: ₨28,000.00.₨18,999.00Current price is: ₨18,999.00.- Power supply: 5-30VDC
- Maximum power consumption: ≤0.15W
- Operating temperature: -40~80℃
- NPK parameters:
- Range: 0-1999 mg/kg(mg/L)
- Resolution: 1 mg/kg(mg/L)
- Precision: ±2%FS
- Response time: ≤1S
- Protection grade: IP68
- Probe material: 316 stainless steels
- Sealing material: Black flame-retardant epoxy resin
- Default cable length: 2 meters, cable length can be customized.
- Dimensions: 45*15*123mm
- Output signal: RS485/4-20ma/0-5v/0-10v
-
HX711 Module Load Cell Voltage Amplifier
Original price was: ₨160.00.₨149.00Current price is: ₨149.00.The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell with some calibration. You?ll be able to get very accurate weight measurements.
-
Goot 30W Soldering Iron KS-30R
Original price was: ₨950.00.₨749.00Current price is: ₨749.00.- Manufacturer: Goot
- Model: KS-30R
- Color: Blue
- Material: ABS
- Power: 30W
- Working Voltage: AC220V / 50Hz
- Soldering Iron Length: Approx. 32cm
- Power Cord Length: Approx. 123cm / 48.43in
- Item Weight: Approx. 50g
- Package Weight: Approx. 134g / 4.71oz
-
LED SMD Strip 5m Size In Red Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00.- Working Voltage: DC12V
- LED Type: SMD5050/SMD2835
- LED Quantity: 60leds/m, 120leds/m, 5 meters/rollWidth : 8mm (SMD2835) /10mm (SMD5050)
- Protection Rate : Waterproof IP65 /Non waterproof IP20
- Color: Red
- Is Dimmable: Yes (dimmer switch required, but not included)
- Is Trimmable: Yes (cuttable every three LEDs)
- View angle: 120~140
- Working Temperature: -20C to 50 C
-
Acrylic Rectangle 0.56 Inch 3 Digit 7 Segment Display
Original price was: ₨130.00.₨89.00Current price is: ₨89.00.- Operating current: 10mA
- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Low Current Consumption
- High Brightness
- Blackface and RED LED segments
-
DS3231 REAL TIME CLOCK MODULE – RTC
Original price was: ₨1,099.00.₨349.00Current price is: ₨349.00.- Size: 38mm (length) * 22mm (W) * 14mm (height)
- Operating voltage: 3.3 – 5 .5 V
- DS3231M at the core
- Clock Accuracy: 5ppm 0-40 C
- Two programmable alarms
- Programmable square-wave output
- DS3231M Datasheet
- LIR2032 / CR2032 backup battery holder for uninterrupted time management (battery not included)
- Wiring instructions (with Arduino Uno R3 for example):
- SCL A5
- SDA A4
- VCC 5V
- GND GND















































































