-
SUDER Soldering Iron 30W With Soldering Flux Soldering Wire 50g Soldering Foam Desoldering pump
Original price was: ₨1,500.00.₨1,299.00Current price is: ₨1,299.00. Quick View -
Soldering Iron 30W With Soldering Foam, Soldering Flux, Soldering wire (FINE ) 50grams
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View -
5V 4A Power Supply Adapter 5V 4000mA
Original price was: ₨975.00.₨849.00Current price is: ₨849.00. Quick ViewNeed a great deal of 5V power? This exchanging supply gives a tidy controlled 5V yield at up to 4 Amps (4000mA). 110 or 240 information, so it works in any country. The attachments are “US 2-prong” style so you may require a fitting connector.
This cable ends with a ‘standard’ 5.5mm OD, 2.1mm ID positive tip connector and with match with our 2.1mm electrical string, female terminal square connector, breadboard-accommodating DC jack, and so forth
This connector is incredible for use with RGB LED Matrices, NeoPixels, RGB LED pixels or addressable LED strip, and so on Its not useful for controlling an Arduino through the DC jack as it needs at any rate 7.5V – look at our 9V connector
-
RPM Measurement Sensor Rotational Speed Measuring Module
Original price was: ₨160.00.₨119.00Current price is: ₨119.00. Quick View- Input voltage: 3.3V to 5V
- Output signal: TTL signal, active low
- Pulse frequency range: 0 to 100Hz
- RPM range: 0 to 6000RPM
- Dimensions: 32 x 14 x 7mm
- Weight: 5g
-
-
KBL406 5-600V 4A Bridge Rectifier
Original price was: ₨45.00.₨39.00Current price is: ₨39.00. Quick ViewBridge rectifier diode with a 4A current rating.
-
DB9 is a commonly known connector used in Serial Asynchronous Data Transmission that are are designed to work with the EIA/TIA 232 serial interface standard. RS-232 (Recommended Standard 232) is the standard for establishing serial data transfer between DTE(Data Terminal Equipment) and DCE(Data Circuit-terminating Equipment.
-
74HC540 is a 20 Pin Octal 3-state Inverting Buffer IC having 2V to 6V Operating Voltage range with 6mA output current. The 3-STATE buffers utilize advanced silicon-gate CMOS technology. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances.
-
INFRARED TEMPERATURE SENSOR GY-906 MLX90614
Original price was: ₨3,950.00.₨1,599.00Current price is: ₨1,599.00. Quick View- Easy to integrate
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Factory calibrated in temperature range:
- -40+125C for sensor temperature
- -70+380C for object temperature
- High accuracy of 0.5C over a wide temperature range (+50C for both) High (medical) accuracy calibration
- The measurement resolution of 0.02C
- Single and dual-zone versions
- SMB is compatible digital interface
- Customizable PWM output for continuous reading
- Different package options for applications and measurements versatility
-
TB6560 Stepper Motor Driver IC
Original price was: ₨1,050.00.₨929.00Current price is: ₨929.00. Quick ViewThe latest 3rd generation TB6565 Stepper Driver has been upgraded to the intelligent, professional and industrial-level drive, embedding intelligent memory chip and upgrading the external manual control tools.
-
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
-
A type of fastener, for holding items together, primarily electrical cables or wires. This is 4″ long in length.
-
8×8 Dot Matrix MAX7219 MCU Control Display Generic Module
Original price was: ₨550.00.₨399.00Current price is: ₨399.00. Quick View- Operating Voltage: 4.7V 5.3V
- Operating Current: 320mA
- Max Operating Current: 2A
- Display type: LED
- Mounting: THT
- Display type: Matrix
- Display resolution: 8×8
- Color: Red
- Common electrode: Cathode
-
Center Tapped Transformer 9V 0.4Amp
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Input Voltage: 220V/AC
- Output Voltage: 9V/AC
- Output current: 0.4 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-
8051 Atmel AT89C51 Microcontroller 8-bit
Original price was: ₨500.00.₨399.00Current price is: ₨399.00. Quick View- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
Screwdriver Shovel STANLEY 60004S
Original price was: ₨500.00.₨220.00Current price is: ₨220.00. Quick View‘-Basic screwdriver 4-inch flat tip / Basic screwdriver Standard tip
-Handles with 4 ergonomic lobes for greater torque and comfort.
-Colored handles to identify tips: flat red, cross blue, Torx green.
-Heat-treated steel bars for longer life.
-Nickel-plated bars resistant to rust.
-Reinforced anti-slip toe.
-Tip 1/4 (6.5 mm) -Bar Length
4 inches (101 mm) -
Camera Module 5MP Pi3 Model B Rev 1.3 with Cable
Original price was: ₨1,250.00.₨919.00Current price is: ₨919.00. Quick View- Lens: 1/4 5M
- Aperture: 2.9
- Focal Length: 3.29
- FOV: 72.4 degrees
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight: 5 gm
-
UNI-T UT33A+ Palm Size Multimeter
Original price was: ₨4,420.00.₨3,499.00Current price is: ₨3,499.00. Quick ViewSpecification
- Brand Name:UNI-T
- Model Number:UT33A
- DIY Supplies:Electrical
- Measuring Current Range:400mA/4mA/40mA/400mA/10A
- Operating Temperature:0 – 50
- Measuring Voltage Range:400mV/4V/40V/400V/500V
- Display Type:Digital Display
- Dimensions:13 x 7.5 x 2.5cm
- Measuring Capacitance Range:–
- Measuring Resistance Range:400/4k/40k/400k/4M/40MOhm
-
SanDisk 16GB Micro SDCARD Memory Card
Original price was: ₨1,055.00.₨899.00Current price is: ₨899.00. Quick View- 16GB Storage Capacity
- Class 10 / UHS-I
- Max. Read Speed: 80 MB/s
- Min. Write Speed: 10 MB/s
- Water/Temperature/X-ray/Shock Proof
- Built-in Write-Protect Switch
- Class 10 performance for Full HD Video (1080p)
- Read speeds up to 80 MB/s
- Writable label for easy identification and organization
- Engineered with UHS-I bus architecture
- This SD memory card comes shock, temperature, x-ray, magnet, and waterproof proof
-
377 Silver Oxide Button Cell Battery, 1.5 V Get the durable, reliable power that keeps going with this Cell Battery. It delivers long-lasting power to your button-battery-operated devices, from household electronics like keyless entry systems, to e-books, toys, calculators, and watches, to heart rate and glucose monitors. These zero-mercury coin batteries can hold power for up to five years in storage.
-
The CD4024 is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is reset to its logical 0 stage by a logical 1 on the reset input. The counter is advanced one count on the negative transition of each clock pulse.
-
The 4077 is a quad 2-input EXCLUSIVE-NOR gate. The outputs are fully buffered for the highest noise immunity and pattern insensitivity to output impedance. The 4077 operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.
-
- High-Voltage Types (20V Rating)
- CD4073BMS Triple 3-Input AND Gate
- CD4081BMS Quad 2-Input AND Gate
- CD4082BMS Dual 4-Input AND Gate
- Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
IRF244 N-Channel MOSFET Transistor
Original price was: ₨90.00.₨60.00Current price is: ₨60.00. Quick View- Package Type: TO-220
- Transistor Type: N Channel
- Max Voltage Applied From Drain to Source: 55V
- Max Gate to Source Voltage Should Be: 20V
- Max Continues Drain Current is : 49A
- Max Pulsed Drain Current is: 160A
- Max Power Dissipation is: 94W
- Minimum Voltage Required to Conduct: 2V to 4V
- Max Storage & Operating temperature Should Be: -55 to +170 Centigrade
-
- Type –NPN
- Collector-Emitter Voltage: 60V
- Collector-Base Voltage: 60V
- Emitter-Base Voltage: 5V
- Collector Current: 3A
- Collector Dissipation – 30W
- DC Current Gain (hfe) –40 to 320
- Transition Frequency – 5 MHz
- Operating and Storage Junction Temperature Range -55 to +150C
-
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
-
- High forward surge current capability
- Ideal for printed circuit board
- High-temperature soldering guaranteed:
- 260°C/10 seconds, 0.375″ (9.5mm) lead length,
- 5 lbs (2.3kg) tension
- This series is UL recognized under component index, File number E194718
- RoHS Compliant
-
2004A 20X4 Character Blue Color LCD Display
Original price was: ₨1,650.00.₨899.00Current price is: ₨899.00. Quick View- Module size(W x H x T): 98.0 x 60.0 x 14.0mm
- Viewing area(W x H): 76.0 x 26.0mm
- Character size(W x H): 2.94 x 4.74mm
- Dot size:(W x H): 0.54 x 0.54mm
- LCD type & color: STN(Blue), FSTN
- View angle: 6 O’clock
- Display type: positive / negative type
- Control IC & package: KS0073 or EQV, COB
- Operating temperature: -20°C – +70°C
- Storage temperature: -30°C – 80°C
-
Proximity Sensor LM12 3002 NA
Original price was: ₨1,250.00.₨999.00Current price is: ₨999.00. Quick ViewProximity Sensor LM12 3002 NA switch is composed of three parts: oscillator, switch circuit and magnified output circuit. The oscillator will generate an alternating electric field. When hemetal object approaches this electric field and reaches the induction distance, whirlpool will generate in metal object, resulting in attenuation of vibration and then stop. The change of vibration and stop of oscillator is treated by begird stage magnified circuit and converted to switching sign, triggering driving con-contact detection.
-
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC,parity,bit coding bit counting
- Anticollision
- Typical tickting transaction: <100 ms ( including backup management)
-
- Seamless Integration with other components
- Made of superior grade material for long life
- Designed to contribute in the overall performance of the equipment
- Lightweight and durable, easy to match the ultrasonic sensor
-
- Voltage: 3.3V to 5V
- Characteristics: 700nm x 1mm
- Chipset: TSOP1838 37.9kHz
- Daylight Rejection: up to 500LUX
- Receiving Distance: up to 18 m
- Size: 19mm x 15mm x 14mm
-
- Supply Voltage: 1N5340 6V
- Type: Low Power Switching Zener Diode
- Package: DO-15
- Diode Configuration: Single
- Zener Voltage Tolerance: 5%
- Package Type: Through Hole
- Dissipation Power: 5W
- Dimensions: 10.7 x 7 x .1cm
- Operating Temperature: -65°C to 200°C
-
Raspberry PI Camera with IR
Original price was: ₨4,500.00.₨3,999.00Current price is: ₨3,999.00. Quick ViewThe Raspberry Pi IR-CUT Camera is a day and night camera. You can get the best imaging whatever it is in the daytime or at night. It’s a built-in IR-CUT camera, can be used during the day and night, When the camera in the daytime will switch to day mode, the camera image is a normal color image, When the camera at night will switch to night mode, the camera can normally identify the infrared fill light Of the light, which can be set through the software switch, to solve the other night vision version camera during the day to take pictures of the image color is not normal.
-
- Its color is White.
- Alarms diameter is 29mm / 1.14”
- Electronic buzzer height is 15mm / 0.59”
- It has 2 mounting holes. And the distance of the holes is 40mm / 1.57”
- Its rated voltages are 12Volts.
- Its operating voltages are 3 to 24 voltages.
- Its rated current is 20mA.
- Its min sound output at 10cm is 95 Db.
- Its resonant frequency is 3100 to +- 500.
- Its operating temperature is -20 to -80 degrees centigrade.
- It has intermittent sound and mounting holes.
- It has good storage and it allows you to use it for a long time.
-
MPU9250 IMU 9DOF MPU-9250
Original price was: ₨2,000.00.₨1,650.00Current price is: ₨1,650.00. Quick View- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
- Accelerometer full-scale range of 2g, 4g, 8g, and 16g
- Magnetometer full-scale range of 4800T
- I2C and SPI serial interfaces
- Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
- Power supply: 3-5v
-
- 3.3V & 5.0V operations for DDWRT support on different voltage system
- Standard USB type A male and TTL 6pin connector.
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real-time
- Works with existing COM port PC applications. Ready for Windows 8/7/Vista/Server 2003/XP/2000/CE
- Plastic coating protection from standard wear and tear.
- Size: 52mm X 15.5mm x 6.5mm (L x W x H).
-
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
-
BTS 7960 Motor Driver 43A
Original price was: ₨1,800.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Double BTS7960 large current (43 A) H bridge driver;
- 5V isolate with MCU, and effectively protect MCU;
- 5V power indicator on board;
- voltage indication of motor driver output end;
- can solder heat sink;
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
- isolation chip 5 V power supply (can share with MCU 5 V);
- size: 4 * 5 * 1.2 cm;
-
The 8085 is an 8-bit general purpose microprocessor that can address 64K Byte of memory. It has 40 pins and uses +5V for power. It can run at a maximum frequency of 3 MHz.
-
- Op-amp coupled with MOSFET at output
- Wide power supply Range
- Singe supply – 5V to 16V
- Dual supply – ±2.5V to ±8V
- Input Terminal current: 1mA
- Maximum Output Voltage: 13.3V
- Maximum source current: 22mA
- Maximum sink current: 20mA
- Supply current: 10mA
- Common Mode Rejection Ration (CMRR): 80dB
-
- A dual version of NE556 consists of two precision timers that operate in both monostable and astable modes.
- It is specified for operation from 4.5 V to 16 V.
- TTL compatible output which can source or sink current of up to 150mA.
- Adjustable duty cycle.
- It can produce a timing delay from microseconds to hours.
- The operating temperature range is from 0 to 70 degrees Celsius.
- It has temperature stability better than 0.005% per C.
-
Optocoupler 817 QUAD contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA.
-
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression


































































