-
IR2110 Mosfet & IGBT Gate Driver IC
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewThe IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
-
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board
Original price was: ₨1,500.00.₨1,049.00Current price is: ₨1,049.00. Quick View- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
-
- Operating Voltage is 5V
- it is with Chinese font
- it has a blue backlight
- Controller used in it ST7920
- its Size is 93x70mm
- It displays 20 characters in 4 lines.
- Its input voltage range is 4.5V to 5.5V.
- The operating voltage for LCD is 5V Direct Current (DC).
- Its interface consists of 6800 8 bit parallel.
- Positive transflective is its display type.
- Its backlight consists of blue and green.
-
Also called Flux. This is added to act as a temporary adhesive, holding the components until the soldering process melts the solder and fuses the parts together.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
-
- Manufactured using high quality and excellent durable materials.
- Perfect replacement for the original Charging Connector.
- Precision machining fits the cell phone perfectly.
- High-quality OEM product, tested and quality checked for each piece before shipping.
- This part is not returnable so please be sure that you are purchasing the proper & correct part for your specific device.
- The image shown is for presentation purposes only, the actual product will be different from what shown in the image.
-
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
- 3.2 cm x 1.4 cm x 1.0 cm
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 8A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 500V
- Drain Source Resistance (RDS) is 0.85 Ohms
- Rise time and fall time is 23nS and 20nS
- Available in To-220 package
-
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
-
- Darlington medium-power NPN Transistor
- High DC Current Gain (hFE), typically 1000
- Continuous Collector current (IC) is 5A
- Collector-Emitter voltage (VCE) is 100 V
- Collector-Base voltage (VCB) is 100V
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 120mA
- Type NPN
- Collector-Emitter Voltage: 100V
- Collector-Base Voltage: 100V
- Emitter-Base Voltage: 5V
- Collector Current: 5A
- Collector Dissipation: 65W
- DC Current Gain (hfe): 1000
- Operating and Storage Junction Temperature Range: -65 to +150C
- Package: TO-220
-
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of 8 address bits and 4 data bits. Each address and data input is externally programmable or fed in using switches. The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. These ICs are paired with each other. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address and data, transmitted by a carrier using an RF transmission medium and gives output to the output pins after processing the data. These Ics have operating Voltage : 2.4V ~ 12V. They have Low Power and High Noise Immunity.
-
Arduino SD Card Reader Module
Original price was: ₨220.00.₨199.00Current price is: ₨199.00. Quick View- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V\
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
-
DHT11 Temperature and Humidity Sensor
Original price was: ₨300.00.₨249.00Current price is: ₨249.00. Quick View- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: 0C to 50C
- Humidity Range: 20% to 90%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: 1C and 1%
-
SIM800L GSM Module Micro Sim Card Board
Original price was: ₨1,799.00.₨1,049.00Current price is: ₨1,049.00. Quick View- Module models: SIM800L (latest module, performance than SIM900)
- Operating voltage: 3.7 to 4.2 V (peak current is 2A)
- Support network: China mobile, China Unicom
- Module size: 2.2 x 1.8cm
- TTL serial port can directly link to MCU. Don’t need a MAX232
- Power on automatic startup, automatic search network
- Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
-
- Working voltage: DC 3.3V-5V
- Working current: 20mA
- Operating temperature: -10~+50
- detection distance :2-40cm
- IO Interface: 4-wire interfaces (-/+/S/EN)
- Output signal: TTL level (low level there is an obstacle, no obstacle high)
- Adjustment: adjust multi-turn resistance 8. Effective angle: 35.7.
- Size: 28mmx23mm
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
-
- The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
- 318 temporary data storage RAM
- Working current of 2.0V, less than 300nA
- Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
- 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
- Simple 3 wire interface
- Compatible with TTL Vcc=5V
- Double power supply pipe for main power and backup power supply.
-
GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Original price was: ₨490.00.₨399.00Current price is: ₨399.00. Quick ViewA 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
-
4 Way IR Line Tracking / Following Sensor Module
Original price was: ₨490.00.₨439.00Current price is: ₨439.00. Quick View- Operating Voltage: 3.3-5V
- Fixing Screw Hole: M3
- Distance setting from 1mm to 10cm
- Control Card Dimensions: 42x38x12mm
- Sensor Dimensions: 25x12x12mm
- Card Output: Digital
-
- Resistance: 203 20K Ohm,
- Resistor Tolerance: ±10% Max
- Max Voltage: 50V
- Rating Power: 0.1W
- Technology: Carbon Film
- Adjustment Type: Top Adjustment
-
- Maximum Terminal current: 4A
- On-state Gate voltage: 1.4V
- Gate trigger current: 10mA
- Max Terminal Voltage is 600 V
- Holding current: 2.2mA
- Latching current: 4mA
- Available in To-220 Package
-
- 24V Positive Voltage Regulator
- Minimum Input Voltage is 33V
- Maximum Input Voltage is 40V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protections are available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
- Output voltage tolerances of ±2% at Tj = 25˚C and ±4% over the temperature range (LM340A)
- Line regulation of 0.01% of VOUT/V of ∆VIN at 1A load (LM340A)
- Load regulation of 0.3% of VOUT/A (LM340A)
- Internal thermal overload protection
- Internal short-circuit current limit
- Output transistor safe area protection
- P+ Product Enhancement tested
-
ULN 2803 is a high-voltage, high-current Darlington transistor array. The device consists of eight npn Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may be connected in parallel for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers.
-
- Carries Low input bias current = 50 pA
- Available with Low input noise current = 0.01 pA/Hz
- Comes with Fast settling time to 0.01% = 2us
- Contains internally trimmed offset voltage = 15 mV
- Carries Low input noise voltage = 16nV/Hz
- Exhibits Low supply current = 3.6 mA
-
Lithium Battery 12V 2.2 Amp 2200mah With BMS
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick View- A 12V and 2.2A rating battery with a Battery Management system to have balanced charging and discharging through every cell of the battery.
- It’s a universal/multipurpose battery also used as WIFI routers, Power Bank, ETC.
- You can also customize lithium batteries as per your requirements.
-
XBee 2mW Wire Antenna – Series 2 (ZB)
Original price was: ₨15,000.00.₨8,799.00Current price is: ₨8,799.00. Quick ViewThis is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
-
Quadcopter Frame – F450 V3
Original price was: ₨5,000.00.₨3,599.00Current price is: ₨3,599.00. Quick ViewQuadcopter / Multi copter Quad-x frame kit in un-assembled form.
-
Heart Rate Monitor ECG AD8232 Module + Leads
Original price was: ₨2,500.00.₨1,479.00Current price is: ₨1,479.00. Quick View- Supply voltage: DC 3.3V
- Output: Analog output
- Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
- Size 36mm * 31mm * 18mm
- Operating temperature: -40C +85 C
-
Digital Clamp Meter CM-550A
Original price was: ₨11,500.00.₨8,299.00Current price is: ₨8,299.00. Quick View- True RMS for accurate readings
- Auto range for ease of use
- NCV (Non-Contact Voltage Detection) for safety
- Live wire test & continuity check for diagnostics
- Diode testing & MAX/MIN recording
- Relative & Zero mode for precise comparisons
- Data hold & low battery indication
- Auto power-off for energy efficiency
-
GSCETE GT55 Digital Multimeter – Precision & Reliability for Every Task
Original price was: ₨6,900.00.₨3,999.00Current price is: ₨3,999.00. Quick View- DC Voltage: 200mV to 1000V
- AC Voltage: 200mV to 750V
- DC Current: 200μA to 10A
- AC Current: 200μA to 10A
- Resistance: 200Ω to 40MΩ
- Capacitance: 20nF to 200μF
- Frequency Measurement: 10Hz to 10MHz
- Temperature Measurement: -20°C to 1000°C (-4°F to 1832°F)
- Duty Cycle: 0.1% to 99.9%
-
JZQ-599B Soldering Iron Bit/Tip Cleaning Sponge Cleaner High Temperature Enduring Cleaner Sponge For Electric Welding Soldering Iron
Original price was: ₨780.00.₨599.00Current price is: ₨599.00. Quick View- Cleaning Ball: High-quality brass
- Base: Heavy-duty stainless steel
- Compact and portable, ideal for workbenches
- Anti-slip base for enhanced stability
- Base Diameter: 70 mm (2.75 inches)
- Height: 60 mm (2.36 inches)
- Works with most standard soldering iron tips
-
Reptile Humidifier Fogger, 4L Cool Mist Fog Mister with Tube
Original price was: ₨12,000.00.₨7,999.00Current price is: ₨7,999.00. Quick View- 4L capacity: capacity design, no need to add water frequently.
- Mute: Silent humidification, will not disturb your pet’s sleep.
- Telescopic hose: It can be bent and stretched at will according to actual needs, easy to use.
- Knob control: the knob controls the amount of fog to prevent the low fog from causing dehydration, withering, bulging, and of energy.
- Safety protection: When the water tank is short of water, the power will be automatically cut off to avoid potential safety hazards.
-
TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor
Original price was: ₨250.00.₨95.00Current price is: ₨95.00. Quick View- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
- Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
- Response time (low power mode) : 220 mS
- Size : 24 x 24 x 7.2 mm
-
XH-W3005 Digital Humidity Controller
Original price was: ₨2,590.00.₨1,499.00Current price is: ₨1,499.00. Quick View- Product Name: Microcomputer Humidity Control Instrument
- Product model: XH-W3005
- Supply voltage: 220v or 12v
- Control range: 0%-99%RH
- Control accuracy: 0.1% RH
- Measurement accuracy: +-2%RH
- Load power: 1500W
- Output type: direct output
- Sensor: chip type
- Appearance size: 60 x 45 x 31mm
-
Unleash Superior Sound with the High-Powered TDA8932 35W Digital Mono Amplifier Board Module
Original price was: ₨1,100.00.₨599.00Current price is: ₨599.00. Quick View- Operating Voltage: DC10-30V (recommended 24V)
- Output Power: 35W
- Speaker Impedance: 4-8 ohms (8 ohms best)
- Circuit Configuration: Mono BTL output
- Board Size: 45 x 31mm
-
SCT013-000 CT 100A Non-invasive AC Current Sensor
Original price was: ₨1,800.00.₨1,249.00Current price is: ₨1,249.00. Quick View- Core Material: Ferrite
- External Material : ABS
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
-
50A SCT-013-000 Non-invasive AC Current Clamp Sensor
Original price was: ₨1,800.00.₨1,249.00Current price is: ₨1,249.00. Quick View- Input Current: 0~50A AC
- Output Mode: DC 0~1V
- Non-linearity:2-3%
- Build-in sampling resistance(RL): 62Ω
- Turn Ratio: 1800:1
- Resistance Grade: Grade B
- Work Temperature: -25°C ~ ﹢70°C
- Dielectric Strength(between shell and output): 1000V AC/1min 5mA
- Leading Wire in Length: 1m
- Open Size: 13mm x 13mm
-
The Ultimate Backup Power Bank for Your WiFi Router
Original price was: ₨1,899.00.₨999.00Current price is: ₨999.00. Quick ViewIntroducing the Ultimate Backup Power Bank for Your WiFi Router from Electronation Pakistan—Compact, Affordable, and Unbeatable! 🚀
- Smallest Model Available: Sleek, space-saving design.
- Lowest Price in the Country: Top-quality without breaking the bank.
- Reliable Power During Outages: Keep your connection strong and steady.
Don’t let power cuts disrupt your online life. Get yours today from Electronation Pakistan!
-
W5500 Ethernet Network Module / Shield
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. Quick View- Operating voltage: 2.97-3.63V
- Current draw: Typical: 128mA, Max: 200mA
- SPI clock frequency: Max: 80MHz
- Ethernet MAC: 10/100BASE-T
- PHY: 10BASE-T and 100BASE-T
- TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
- Hardware sockets: 8
- Internal buffer: 32KB
- Supports: SPI, WOL, and power down mode
-
LED SMD Strip 5m Size In White Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View -
MX-350 MAX Solar DC Water Pump
Original price was: ₨780.00.₨499.00Current price is: ₨499.00. Quick View- Completely Submersible Motor.
- Extremely Quite Operations.
- Suction Cups To Fit Any Water Tank.
- Long Lasting Water Proof Ceramic Shaft.
- Suitable For Fresh And Sea Water Appliances.
-
Arduino Due AT91SAM3X8E ARM Cortex-M3 Board
Original price was: ₨6,240.00.₨4,500.00Current price is: ₨4,500.00. Quick View- MicrocontrollerAT91SAM3X8E
- Operating Voltage3.3V
- Input Voltage (recommended)7-12V
- Input Voltage (limits)6-16V
- Digital I/O Pins54 (of which 12 provide PWM output)
- Analog Input Pins12
- Analog Output Pins2 (DAC)
- Total DC Output Current on all I/O lines130 mA
- DC Current for 3.3V Pin800 mA
- DC Current for 5V Pin800 mA
- Flash Memory512 KB is all available for the user applications
- SRAM96 KB (two banks: 64KB and 32KB)Clock Speed84 MHz
- Length101.52 mm
- Width53.3 mm
- Weight36 g
-
DS1307 RTC REAL TIME CLOCK MODULE
Original price was: ₨390.00.₨169.00Current price is: ₨169.00. Quick ViewDS1307 RTC REAL TIME CLOCK MODULE which adopts the I2C protocol to communicate with SCM, and there was this kind of interface on Arduino, therefore is very convenient to link with each other. DS1307 has a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break-off, but be careful when you use it to take some kind of high-power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually, we will only use the I2C interface to realize the basic set of the clock/read function. Note, that this module must be installed on the battery and can work normally. The battery is button batteries (type CR2032 will be better), the positive upward:
-
4 Bits TM1637 Digital Tube LED 7 Segments Display Module
Original price was: ₨350.00.₨249.00Current price is: ₨249.00. Quick View4 Bits TM1637 Digital Tube LED 7 Segments Display Module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
-
Pack of 5 27mm Piezo Electric Plate
Original price was: ₨400.00.₨330.00Current price is: ₨330.00. Quick View- Product type: Piezoelectric Transducer Piezo Sensor
- Colour: copper and silver
- Dimension: 27 mm
- Weight: 2 g
- Sheet material: bronze
- Package contains: 1 x piezoelectric sensor
-
Telko S063 Portable Door Wedge Guard
Original price was: ₨788.00.₨499.00Current price is: ₨499.00. Quick View- High output: 120DB alarm siren
- Standard 9 volt battery operation
- Required no special installation
- Rugged high impact ABS construction
- Provide alarm siren operation from contact with door or from movement vibration.















































































