-
DUAL USB CURRENT VOLTAGE CHARGER DETECTOR
Original price was: ₨799.00.₨699.00Current price is: ₨699.00. Quick ViewApplicable to all kinds of electronic device. Real-time monitoring the charging data, safe and convenient to use. Capable of testing various output and input current and voltage. With precise calibration function, the electric current is more accurate. Suitable for factories, laboratories and personal use.
-
Buy high quality DC Jack for your printed circuit board. A DC jack is an electrical connector for supplying direct current power.
-
It is an integrated circuit that converts the signals from the RS232 serial port to the proper signal which is used in the TTL compatible digital logic circuits. The MAX232 can convert the signals like RX, TX, CTS, and RTS and it is a dual driver/receiver.
-
- 130 motor parameters:
- Rated Voltage 3V to 5V
- No-load speed: 6000 rpm
- Suitable voltage: 3-6V (6000-12000 rpm)
- No-load current: 80mA
- Stall current: 0.6A
- Motor base size: small hole about 1.9mm
- About 25mm long
- Internal diameter is about 19.5mm
- The base is about 3.8mm thick
- Height: about 24.3mm
- Width: about 13.8mm
- Fan blade: 50mm
- Color: random
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Wide supply voltage range: 3V to 15V
- Low power: 100 nW (typ.)
- High noise immunity: 0.45 VDD (typ.)
- Separate SET and RESET inputs for each latch
- NOR and NAND configuration
- 3-STATE output with common output enable
-
- Type –NPN
- Collector-Emitter Voltage: 400V
- Collector-Base Voltage: 450V
- Emitter-Base Voltage: 7V
- Collector Current: 10A
- Collector Dissipation – 80W
- DC Current Gain (hfe) – 10
- Operating and Storage Junction Temperature Range -55 to +150C
-
6 Pin Crimp Shell Wire | Straight Connector pair
Original price was: ₨95.00.₨69.00Current price is: ₨69.00. Quick ViewThis is a simple six wire cable. Great for jumping from board to board or just about anything else.
-
- Photosensitivity is high
- Response time is fast
- Simple to use
- Sensitivity is adjustable
- Detection angle is 600,
- It is responsive to the flame range.
- Accuracy can be adjustable
- Operating voltage of this sensor is 3.3V to 5V
- Analog voltage o/ps and digital switch o/ps
- The PCB size is 3cm X 1.6cm
- Power indicator & digital switch o/p indicator
- If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
-
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
- Opto-isolated inputs
- Indication LED’s for Relay output status
-
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
Original price was: ₨850.00.₨569.00Current price is: ₨569.00. Quick View- Input Voltage: 10v – 32v DC
- Output Voltage: 12v – 35v DC
- Output Current: 6A MAX
- Input Current: 10A (MAX)
- Output Ripple: 2% MAX
- Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
- Full-Load temperature: 45 degrees.
- No-load current: 25mA typical.
- Voltage regulation: ± 0.5%.
- Load regulation: ± 0.5%.
- Dynamic response speed: 200uS 5%.
- Short circuit protection: None (Please Install fuses and protection circuits at the Input port.)
- Input Reverse Polarity Protection: None (Please Series diode at the input port.)
- Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
- Weight: 2.30 oz (66 g)
-
Clock Thermometer Ks-782a-5 1 Display Orange, Auto Cigarette Lighter
Original price was: ₨800.00.₨549.00Current price is: ₨549.00. Quick View- Large and easy-to-read display for both the clock and thermometer readings.
- Accurate temperature sensing to provide real-time temperature measurements.
- 24-hour clock format, displaying hours, minutes, and potentially seconds.
- Switchable between Celsius and Fahrenheit temperature units.
- Backlight or illumination for enhanced visibility at night or in dark conditions.
- Some models might have additional features like alarms or other convenience functions
-
Stc3028 Digital Temperature And Humidity Controller
Original price was: ₨4,000.00.₨2,099.00Current price is: ₨2,099.00. Quick View- Model: STC-3028
- Input Voltage: AC110 ~ 220V
- Measuring Temperature Range: -20 ~ 80
- Humidity Measurement Range: 00% RH ~ + 100% RH
- Accuracy: 1 , 0.1% RH
- Relay Output Contact Power: 10A / 240VAC
- Material: PC + ABS fireproof
- Panel size: 75x34mm / 2.95×1.34inch Installation
- size: 85x70x28mm / 3.35×2.76×1.10inch
- Cable length: 1m
-
W3230 Temperature Controller
Original price was: ₨1,690.00.₨999.00Current price is: ₨999.00. Quick View- Overall dimensions: 79X43X26mm (hole size 74X39mm)
- Temperature measurement and programming range: -50 ° С … 120 ° С
- Measurement accuracy: 0.1 ° С in the range from -9.9 ° С to 99.9 ° С; or 1.0 ° C outside this range
- Control accuracy: 0.1 ° С 0.1 ° С in the range from -9.9 ° С to 99.9 ° С; or 1.0 ° C outside this range
- Reading update time: 0.5 seconds
- Supply voltage V: 110-220 V AC
- Sensor: NTC 10K 0.5% cable length 0.8 m waterproof
- Maximum load current: 10A / 250VAC; 20A / 12VDC
- Ambient temperature for the controller: +10 … + 60 ° С
- Ambient humidity: 20 – 85>#/p###
- Consumption current: 30 mA
- Current consumption during relay operation: 65 mA
- For indoor use.
- Load connection method: electromagnetic single-channel relay (10A / 220VAC) (for heavy loads use a contactor or solid-state relay of a higher power).
-
- Brand: Generic
- Inductance: 10 uH
- Size: 6 x 8 mm (Diameter x Height)
- Pin length: 14 mm
- Lead Diameter: 0.6 mm
- Rated current: 1A
- Tolerance: 10 %
- Turns: 18.5 TS
-
A?relay?is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current.
-
2N4401 is an NPN bipolar junction transistor that is mainly designed for general purpose, small signal, and switching applications.
-
- Product Name: LED Digital Display Tube
- Type: Common Cathode
- Model: 50AH
- Common Cathode : 3-8
- Digital Display: 1 Digit
- Digital Number: 1 Bit Segment
- Emitted Color: Red
- Pin Number: 10
- Continuous Forward Current: 20mA
- Average Forward Voltage: 2V
- Power Consumption : 3mW
- Luminous Intensity: mcd
- Number Height : 0.5 inch
- Panel Size : 19 x 12. x 8mm / 0.5 x 0.5 x 0.31 inch (L*W*H)
- Total Size : 19 x 12. x mm / 0.5 x 0.5 x 0.55 inch (L*W*H)
- Material : Plastic, Metal
- Color : Black, White
-
- Size 12Inch
- Type: self-locking nylon cable tie
- Material: Nylon66 Cable Tie
- Feature: Heat resistant, erosion control, insulate well.
- Operation Temperature: -40 c to 85c
- Colour: Natural (white or standard colour), UV black.
- Package: Polybag + Label (100pcs/bag)
- To keep all wires in place this product is what u are waiting for.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Ferric Chloride for PCB Etching
Original price was: ₨260.00.₨199.00Current price is: ₨199.00. Quick View1. Suggested only if you know how to etch PCBs with FeCl3.
2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.
3. Mix etchant in water, do not drop water over the etchant.
4. Do an etching procedure in open space so any chemical gas produced during the process can dissipate in the air easily.
5. Put etchant+water solution in the plastic box only.
Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.
Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measures are in place like hand gloves, glasses, etc.
-
- Internally frequency compensated for unity gain
- Large DC voltage gain 100 dB
- Wide bandwidth (unity gain) 1 MHz (temperature compensated)
- Very low supply current drain (700 A) essentially independent of supply voltage
- Low input biasing current 45 nA (temperature compensated)
- Low input offset voltage 2 mV and offset current: 5 nA
- Input common-mode voltage range includes ground
-
- 100% brand new !
- Provide excellent continuous power.
- CR2016 LITHIUM COIN CELL can be used with toys, calculators, laser pointers, cameras, clocks, watches, computers, games, digital cameras, camcorders, PDAs, remote controls, electronic instruments, MP3 players, digital voice recorders, blood glucose meters, cholesterol testing meters, LED lights and other electronic appliances.
- High energy density, long life expectancy.
- Also known as: CR2016 ECR2016 KCR2016 BR2016 LM2016
-
3.7V 500mAH Lithium Polymer Battery
Original price was: ₨499.00.₨399.00Current price is: ₨399.00. Quick View3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo or Lipoly batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in GPS, DVD, ipod, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
-
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Collector Emitter Voltage (VCE) is 40V
- Collector Base Voltage (VCB) is 40V
- Available in To-92 Package
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
Character LCD 16X2 Blue color
Original price was: ₨650.00.₨309.00Current price is: ₨309.00. Quick ViewLCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16×2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments and other multi segment LEDs. The reasons being: LCDs are economical; easily programmable; have no limitation of displaying special & even custom characters (unlike in seven segments), animations and so on. A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
-
OLED Display Module 12864 0.96 Inch 4Pin
Original price was: ₨600.00.₨549.00Current price is: ₨549.00. Quick View- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
-
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
Soil Moisture Sensor For Arduino
Original price was: ₨350.00.₨179.00Current price is: ₨179.00. Quick View- Easy-to-use
- 3-pin screw pin terminal is pre-soldered to the board
- PCB coated in gold finishing
- 3.3V to 5V operating supply voltage range
-
SCT-013-000 Non-invasive AC Current Clamp Sensor 20A
Original price was: ₨1,500.00.₨1,250.00Current price is: ₨1,250.00. Quick ViewAC Current Signal Conversion Module
- Input Voltage (VCC): 3.3V-5.5V
- Interface: Gravity Analog (PH2.0-3P,analog voltage output 0.2-2.8V DC)
- AC Voltage Input Range: 0-1V (AC RMS)
- Relative Error: +/- 4%
- Dimension: 32×27 mm
- Weight: 5g
Open Type AC Transformer Probe
- AC Current Range: 0-20A
- Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
- Accuracy: ±1%
- Non-linearity: ≤±0.2%
- Frequency Range: 50Hz~1kHz
- Cable Length: 1m
- Working Temperature: -25 ℃~+70 ℃
- Opening Size: 13×13 mm / 0.51×0.51 in
- Weight: 50g
-
FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver
Original price was: ₨21,500.00.₨15,999.00Current price is: ₨15,999.00. Quick ViewThe FS-CT6B is a professional and practical 2.4GHz 6-Channel digital LCD transmitter, which is equipped with a FS-R6B receiver to make a digital proportional radio control system, and suitable for RC airplane, glider and helicopter. The transmitter adopts easy-to-read LCD screen to show the working status.
-
UNI-T UT204+ Digital 600A AC/DC Numeral Pincer Multimeter Ammeter Anti-Burning Anti-Misdetection Clamp Meter Multifunction Electrician Current Measurement with True Effective Value, NCV Intelligent
Original price was: ₨20,280.00.₨11,499.00Current price is: ₨11,499.00. Quick View- Power : 1.5V battery (R03) x 2 *no warranty*
- Display : 37mm x 25mm
- Product color : Red and grey
- Product net weight : 235g
- Product sizet: 215mm x 63mm x 36mm
- Standard accessoriest: Batteries, test leads, Thermocouple
- Standard individual packing : Gift box, Carrying bag, English manual
-
Stereo Digital Audio Amplifier Module 2X30W – TPA3110 With Heatsink
Original price was: ₨790.00.₨479.00Current price is: ₨479.00. Quick View- Supply voltage: DC8V-26V
- Dissipation Power: 30W + 30W
- Size: 53 * 45 * 14mm
- Channels: 2 (2.0)
- Output impedance: 4-8ohm
- Current: more than 3A
- Signal-to-noise ratio: 100dB
- Weight: 21g
-
XH-A233 DC 12V-24V Wireless Bluetooth Receiver
Original price was: ₨1,200.00.₨949.00Current price is: ₨949.00. Quick View- Product model: XH-A233
- Audio input: TF card / Bluetooth
- Audio output: 2-channel 2*15W
- Input voltage: DC12-24V
- Bluetooth signal distance: 0-15m
- Operating Temperature:-20~85
- Operating Humidity:5%~95%RH
- Module Size:35*35*7.2mm
-
- Drive Type: Piezo Discs
- Resonant frequency(kHz): 3.0~5.0+/- 0.5 KHz
- Resonant impedance (ohms): 300 max
- Diameter: 10mm/ 0.39 inches
- Thickness: 0.3mm/ 0.01 inches
- Wire Length: 40mm/ 1.57 Inches
- Material: Brass
- Color: As shown
-
Camelion D type Heavy Duty 1.5V D size Battery – 2 Pack
Original price was: ₨900.00.₨599.00Current price is: ₨599.00. Quick View- Voltage: 1.5V
- Chemistry: Zinc-Chloride
- Height: 2.42in (61.5mm)
- Diameter: 1.03in (34.2mm)
- Weight: 0.21lbs
- Type: D
-
Thermal grease (also called CPU grease, heat paste, heat sink compound, heat sink paste, thermal compound, thermal gel, thermal interface material, or thermal paste) is a thermally conductive (but usually electrically insulating) compound, which is commonly used as an interface between heat sinks and heat sources such as high-power semiconductor devices. The main role of thermal grease is to eliminate air gaps or spaces (which act as thermal insulation) from the interface area in order to maximize heat transfer and dissipation.
-
- Product Name: Color Ring Inductor
- Power: 1/4W
- Inductance: 150uH
- Inductance Tolerance: ±10%
- Material: Epoxy Resin, Metal, Inductor
- Mounting Type: Through Hole
- Package / Case: Axial Leaded
- Body Size: 2.5x7mm
- Lead Diameter: 0.5mm
- Total Length: 6cm
-
Buy low price, high quality drill chuck.
-
- Motor construction: 10- Flat coreless vibration motor
- Coil construction: Flat coreless core
- Rectifying method: Precious brush and commutator
- Rated Load: Vibration weight
- Rotation direction: CCW or CW
- Motor position: Any position available
- Voltage range for use: DC 2.5V – 3.5V
- Allowable temperature range: -20C to 70C
- Storage environment: -30C- 80C
-
ESP-01 Adapter Module 3.3-5V
Original price was: ₨270.00.₨249.00Current price is: ₨249.00. Quick View- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
-
N-Channel Power MOSFET provide the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
Single row male pin header for PCBs and veroboard.
-
ULN2004 Features
- Output current (single output): 500mA (MAX.)
- High sustaining voltage output: 50V (MIN.)
- Output clamp diodes
- Inputs compatible with various types of logic







































































