-
-47%
12 Volts Double Pole Double Throw relay. It is often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage.
-
-24%
Out Of Stock- Dimensions: 40 x 40 x 20mm
- Noise: 18DB
- Voltage: 12V
- Speed: ~4000RPM
- Airflow: ~20CFM
- Current: 0.10A
-
-34%
Can connect to DC 12V directly,convenient to useSuper high brightness, and very energy savingSuitabe For: LED bulb, candle lamp, down lamp, ceiling lamp, etc.1 -
-20%
Introducing the 12V LED Round Strip with an 18W aluminum board, this versatile lighting solution is perfect for ceiling lights, downlights, spotlights, and more. With its high-power LED design, it delivers bright illumination while consuming minimal power. The LED’s low heat generation ensures safe and efficient operation, making it suitable for prolonged use.
Featuring a low power consumption and high brightness, this LED strip is an energy-efficient choice for indoor lighting applications. Whether you need to illuminate a room, highlight specific areas, or create a cozy ambiance, this LED strip provides reliable and vibrant lighting.
Please note that during operation, it is important to have a cooling module in place to dissipate any heat generated by the LED strip. This ensures optimal performance and extends the lifespan of the LEDs.
Upgrade your lighting setup with the 12V LED Round Strip and enjoy efficient, long-lasting illumination for your ceiling lights, downlights, spotlights, and more. Perfect for both residential and commercial environments, this LED strip is an excellent choice for indoor lighting needs.
-
-23%
12V Panel Light 16mm LED indicators using multi-chip technology provides you with bright and even colour at lower power consumption. Even better is the quick and easy installation with a back of panel lock nut and captive screw terminals. You are offered a voltage range of 12V to 230V and a choice of colours, red, green, yellow, blue and white. This range of LED indicators is rated IP40 and have an operational life of 30,000 hours.
-
-6%
Out Of Stock12V Solenoid lock has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet, safe or door.
-
-22%
- 12V SPDT Relay 5Pin
- UL&TUV certificated
- Rohs and Reach Compliance
- High switching capability:12A
- Plastic Sealed Type Available
-
-29%
Out Of Stock12V Spot Welder Set Portable Battery Spot Welding Storage Machine
Original price was: ₨4,500.00.₨3,199.00Current price is: ₨3,199.00. Quick View- Material: PCB
- Suitable for: 18650/26650/32650 lipo battery
- System voltage: 12-V-14.6V
- Working current: 90-150A
- Suggested battery: (not included)
- 20-45ah Lead-acid battery with fine performance and small internal resistance
- 3.5-5.5ah 45C 3S aeromodel lithium battery pack
- 30-35ah capacity 18650 battery pack
- Package size: 190 * 110 * 30mm / 7.5 * 4.3 * 1.2in
- Package weight: 110g / 3.9ounce
-
-42%
- Product model: 385 DC miniature diaphragm pump
- Normal working time: 2-3 years
- Maximum suction: 2 meters
- Motor length: 32MM
- Motor diameter: 28MM
- Pump length: 36MM
- Total length: 69MM
- Pump diameter: 40MM*35MM
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-55%
Out Of Stock13S 30A 48V Li-ion Battery Protection Board BMS
Original price was: ₨7,850.00.₨3,499.00Current price is: ₨3,499.00. Quick View-
Battery Type: Lithium-ion (3.7V cells)
-
Battery Configuration: 13S (13 cells in series)
-
Nominal Voltage: 48V
-
Max Input Charging Voltage: 54.6V
-
Input Charging Current: 30A
-
Output Discharging Current: 30A
-
Cell Type: 18650 or similar Li-ion cells
-
Operating Temperature: -40°C to +125°C
-
Board Type: Charging and Protection PCB with Balance
-
-
-55%
Out Of Stock13S 48V 60A Li‑Ion Battery Protection & Equalizer BMS – High‑Power 60 A Board
Original price was: ₨8,500.00.₨3,799.00Current price is: ₨3,799.00. Quick View-
Cell Configuration: 13S (13 cells in series)
-
Nominal Voltage: 48 V
-
Continuous Discharge: 60 A
-
Protection Types: Overcharge, Over-discharge, Overcurrent, Short circuit
-
Balance Feature: Equalizer board keeps cells in sync
-
Waterproof & Durable: Dust/shock resistant
-
Size & Weight: ~70 × 56 × 9 mm, ~60 g
-
-
14 Pin – DIP IC Socket/Base IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
-
Overall height above PCB: 4.8mm
-
PCB hole required: 0.6mm
-
Pitch Width: 7.62mm (0.3in)
- Pin Pitch: 2.54mm (0.1in)
- Pins: 14 pins
-
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- Product Name: Color Ring Inductor
- Power: 1/4W
- Inductance: 150uH
- Inductance Tolerance: ±10%
- Material: Epoxy Resin, Metal, Inductor
- Mounting Type: Through Hole
- Package / Case: Axial Leaded
- Body Size: 2.5x7mm
- Lead Diameter: 0.5mm
- Total Length: 6cm
-
-14%
Out Of Stock1500W 30A CONVERTER STEP UP POWER SUPPLY MODULE
Original price was: ₨4,999.00.₨4,299.00Current price is: ₨4,299.00. Quick ViewWhen using the boost power supply should pay attention to the following points:
1. the output polarity cannot be reversed or short circuit.
2. when using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply
3. Input power supply voltage must be above 10V.
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded. Then pick up the load. (must ensure that the switching power supply has been working).
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current,the circuit structure of the boost module can not be adjusted in short circuit way.
6. If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant, it is to ensure that input is lower than the output voltage.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-31%
150W Ceramic Heater Heat Emitter Lamp Incubator
Original price was: ₨799.00.₨549.00Current price is: ₨549.00. Quick ViewThis 150w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
-
-33%
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
Original price was: ₨850.00.₨569.00Current price is: ₨569.00. Quick View- Input Voltage: 10v – 32v DC
- Output Voltage: 12v – 35v DC
- Output Current: 6A MAX
- Input Current: 10A (MAX)
- Output Ripple: 2% MAX
- Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
- Full-Load temperature: 45 degrees.
- No-load current: 25mA typical.
- Voltage regulation: ± 0.5%.
- Load regulation: ± 0.5%.
- Dynamic response speed: 200uS 5%.
- Short circuit protection: None (Please Install fuses and protection circuits at the Input port.)
- Input Reverse Polarity Protection: None (Please Series diode at the input port.)
- Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
- Weight: 2.30 oz (66 g)
-
-30%
15G Solid Rosin Welding Soldering Flux Paste
Original price was: ₨40.00.₨28.00Current price is: ₨28.00. Quick View- Melting point: 125 C
- Neutral PH 7>0.3
- Features:
- .High Quality
- .Fluxing excellent results, joint high intensity
- .Good insulation
- .No corrosion,IC and for no corrosive
- .Smooth welding surface
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-25%
Out Of Stock16 Channel Relay Module
Original price was: ₨2,800.00.₨2,099.00Current price is: ₨2,099.00. Quick View- Product Name: 16-Channel Relay Module
- Number of Channels: 16
- Control Signal voltage: 5V, active low
- Load Voltage: AC 250V/10A, AC 125V/15A
- DC 30V 10A
- Input power: 12V
- Each board needs 15-20mA Driver Current
- I / O port driver is active in low level.
- 1-16 channel optionally fully open/closed,
- or any channel.
- Standard interface that can be controlled directly by microcontroller
- Indication LEDs for Relay output status.
- Independent common end COM makes the relay convenient for users to access different signals.
- Use optocoupler protection with high safety performance
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Size: 8 x 5.7 x 1.2 inches
- Weight: 8.8 ounces
-
-17%
- Overall height above PCB: 4.8mm
- PCB hole required: 0.6mm
- Pitch Width: 7.62mm (0.3in)
- Pin Pitch: 2.54mm (0.1in)
- Pins: 16 pins
-
-19%
Out Of Stock1620 Lithium Button Coin Cell Battery 3V CR1620
Original price was: ₨36.00.₨29.00Current price is: ₨29.00. Quick ViewMaxell 1620 Lithium 3V Button Coin Cell Battery. This batteries are used in multiple devices like Watches, Car Remotes, Measuring Instruments, Weighing scales, Glucose meters, Remotes, Industrial Instruments etc.
-
Hot-20%
1660 Point Bread Board
Original price was: ₨2,499.00.₨1,999.00Current price is: ₨1,999.00. Quick ViewA breadboard is referred to a solder-less breadboard. These are great units for making temporary circuits and prototyping, and they require absolutely no soldering. You just need to place the component on the breadboard equipped with a power source.
-
-29%
Specifications:
- Max Dimensions: 18.06mm / 0.7″ x 18mm / 0.7″ x 29.4mm / 1.15″
- Shaft Dimensions: 14.89mm / 0.58″ x 15.56mm / 0.6″ x 18.7mm / 0.73″
- Button Height: 5mm / 0.2″
- Button Height Depressed: 3.5mm / 0.15″
- Weight: 4.6g
-
Out Of Stock1. multi-function servo bracket x 16
2. long U-shaped bracket x4
3. short U-shaped bracket x 7
4. oblique U bracket x 4
5. L bracket x 4
6. big feet x 2
7. U-beam x 1
8. cup bearings x 14
9. a word board x 4
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-44%
18650 Battery NCR 1 Cell Holder
Original price was: ₨70.00.₨39.00Current price is: ₨39.00. Quick View- Material: Plastic and metal.
- Output Voltage: 3.7v
- Colour: Black.
- Weight: 10g.
- Wire Lenght: 6″
- Dimension (Appro.): 76x20x20xmm
- Takes 1 standard size 18650 batteries side by side to form a compact battery of 3.7V using alkaline batteries.
-
-27%
18650 Universal 1 slot Battery USB Charger adapter
Original price was: ₨300.00.₨220.00Current price is: ₨220.00. Quick View- Product name: 18650 charger-single slot independent charging
- Product model: BH-042100-02U with wire
- Functional characteristics: single-slot independent charging
- Power supply mode: conventional USB power supply
- Input mode: DC 5V 1A-2A
- Output mode: DC 4.2V 1000mA
- Product size: 10*22*27mm
- Product certification: EU CE/EMC certification, US FCC certification