-
- N-Channel Power MOSFET
- Continuous Drain Current (ID) is 110A when VGS is 10V
- Minimum Gate threshold voltage 2V
- Drain to Source Breakdown Voltage: 55V
- Low On-Resistance of 8.0m
- Gate-Source Voltage is (VGS) is 20V
- Rise time is 101ns
- It is commonly used with Power Switching circuits
- Available in To-220 package
-
This is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.
-
Microphone Sound Sensor Module
Original price was: ₨199.00.₨149.00Current price is: ₨149.00. Quick ViewThis module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent low. It has working voltage of 3.3-5V.
-
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)
- On-board Volume Control with Built-in Power Switch
- Good sound quality
- Can use computer USB for power supply directly. Double panel wiring solves crosstalk
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4 Load and 5V Power Supply
- Filterless, Low Quiescent Current and Low EMI
- Low THD+N
- Superior Low Noise
- Efficiency up to 90%
- Short Circuit Protection
- Thermal Shutdown
-
Dotted 100mm X 220mm Stripboard Veroboard Prototyping Board
Original price was: ₨170.00.₨149.00Current price is: ₨149.00. Quick View- Material: Fibreglass FR4
- Surface: Copper PCB
- Hole Diameter: 1.0mm
- Hole Pitch: 2.54mm
- Board Size: 100x220mm
- Copper Thickness: 25 micron
- Sided: Single-Sided
-
- It is well designed to be durable during handling and repeated connections.
- Cable transfer speed is up to 480Mbps.
- USB Type: 2.0
- Data transfer rate: up to 480Mbps
- Connectors: USB type A tata-USB type B tata
- Length: 1.3 m
- Color: BLUE
-
- Material: FR4
- Length: 25mm
- Width: 11mm
- Height: 16mm
- Weight: 1.59g
- Operating Voltage: 5v DC
-
- Its color is White.
- Alarms diameter is 29mm / 1.14”
- Electronic buzzer height is 15mm / 0.59”
- It has 2 mounting holes. And the distance of the holes is 40mm / 1.57”
- Its rated voltages are 12Volts.
- Its operating voltages are 3 to 24 voltages.
- Its rated current is 20mA.
- Its min sound output at 10cm is 95 Db.
- Its resonant frequency is 3100 to +- 500.
- Its operating temperature is -20 to -80 degrees centigrade.
- It has intermittent sound and mounting holes.
- It has good storage and it allows you to use it for a long time.
-
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
lm2596 Module DC/DC Step-Down
Original price was: ₨300.00.₨149.00Current price is: ₨149.00. Quick View- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 to +85) (output power 10W or less)
- Full load temperature rise: 40
- Load regulation: 0.5%
- Voltage regulation: 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
-
- Analog Controlled LED Driver IC with Logarithmic output
- LED incremented by one step for every 3dB
- Monitor upto 30dB using 10 LEDs
- Number of controllable LEDs: 10
- Operating Voltage: 3V to 25V
- Reference Voltage: 1.2V to 12V
- LED sink current: 1mA to 30mA (programmable)
- Both Dot/Bar mode available
- Available in 18-pin DIP, PLCC package
-
- Keypad Layout: 4×4 matrix layout, consisting of 16 keys arranged in four rows and four columns.
- Size: Typically measures 76mm x 69mm (Length x Width).
- Number of Keys: 16 programmable keys, each with a unique position in the matrix.
- Input Method: When a key is pressed, it generates a unique combination of row and column signals, which can be decoded to identify the pressed key.
- Interface: Typically interfaces with microcontrollers or embedded systems using digital I/O pins.
- Material: Made of durable and lightweight materials suitable for various environments.
- Compatibility: Compatible with a wide range of microcontrollers and development boards.
- Application: Commonly used in projects requiring user input, password entry, or menu navigation.
-
TC 4427 is a dual high speed power mosfet driver. ThIS device IS highly latch-up resistant under any conditions within their power and voltage ratings. All terminals are fully protected against Electrostatic Discharge (ESD).
-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×3 type 12 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipment’s, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed.
-
512 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground
. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
. Built-in multidrop controller ensures compatibility with other MicroLAN products
. EPROM partitioned into two 256-bit pages for randomly accessing packetized data
. Each memory page can be permanently write-protected to prevent tampering
. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data
. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page
. Reduces control, address, data, power, and programming signals to a single data pin
. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps
. 8-bit family code specifies DS2501 communications requirements to reader
-
- The high current transfer ratio of 50%
- High isolation voltage of 7.5K
- High BVCEO of 55V(min)
- UL E91231 recognized
- Custom electrical selections are available
- A forward current of 50mA
- Quad-channel
-
Specifications:
- Material: Glass Epoxy (Single Side)
- Size: 8 Inches X 8 Inches
- Approx Thickness – 1.5 mm
-
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
Original price was: ₨350.00.₨139.00Current price is: ₨139.00. Quick View- Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
-
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
-
- Drain Current ID= 9.2A@ TC=25
- Drain Source Voltage : VDSS= 650V(Min)
- Static Drain-Source On-Resistance: RDS(on) = 0.83(Max)
- Avalanche Energy Specified
- Fast Switching
- Simple Drive Requirements
-
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40C to 85C.
- Turn on and Turn off time is 2 sec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.
-
- Photosensitivity is high
- Response time is fast
- Simple to use
- Sensitivity is adjustable
- Detection angle is 600,
- It is responsive to the flame range.
- Accuracy can be adjustable
- Operating voltage of this sensor is 3.3V to 5V
- Analog voltage o/ps and digital switch o/ps
- The PCB size is 3cm X 1.6cm
- Power indicator & digital switch o/p indicator
- If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
-
- VCC: Power interface,5V
- GND: Ground
- IN: Control interface.
- Drive Current: At least 4mA
- COM: Control circuit ground, connect to GND
- Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
- Weight: Approx. 12g
-
IR Obstacle Avoidance Sensor
Original price was: ₨250.00.₨135.00Current price is: ₨135.00. Quick View- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35
- Comparator chip: LM393
- 3mm screw holes for easy mounting
-
This tiny speaker is the perfect addition to any small audio project where you need an8impedance.
-
MAX485 RS485 TTL to RS-485 Converter Module In Pakistan
Original price was: ₨250.00.₨129.00Current price is: ₨129.00. Quick View- Operating voltage: 5V
- Distances: up to 1200 meters
- Speeds: up to 2.5Mbit/Sec
- Multi-drop supports: up to 32 devices on the same bus
- Power LED: Red
- Board size: 44 (mm) x14 (mm).
-
LM393 LDR OPTICAL SENSITIVE RESISTANCE MODULE LIGHT
Original price was: ₨250.00.₨129.00Current price is: ₨129.00. Quick View- For Light intensity detected,light brightness sensors,Smart car module
- Using the sensitive type photosensitive resistance sensor
- Waveform of the comparator output signal is good,strong driving ability
- With adjustable potentiometer can adjust and detect the brightness of the light
- Come with bolt holes for easy installation
-
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
6 MHz Crystal Oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
- Capacity (Ah): 2Ah – 3Ah ( 2000mAh – 3000mah)
- Charging Voltage (V): 4.2 V
- Energy (Wh): 12.2 Wh
- Energy Density (Wh/L): 730 Wh/L
- Nominal Voltage (V): 3.6V-3.7V
- Weight (g): 46 g
- Diameter (mm): 18.06 mm (+/- 0.03 mm)
- Height (mm): 65 mm (+/- 0.03 mm)
- Max. Discharge rate: C Rating 2C (Maximum recommended current 6.8A)
- Top (positive side): Flat top
- Model: NCR18650B
- Made in Japan
-
- 1m
- Male to Male.
- Stereo Audio Aux Extension Cable .
-
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression
-
Mp2307 Mini 360 Dc To Dc Step Down Buck Converter Module
Original price was: ₨360.00.₨119.00Current price is: ₨119.00. Quick View- MPS MP2307DN buck regulator IC
- 4.75 – 23VDC input voltage
- 1.0 – 17VDC selectable output voltage
- 3A surge current, 1.8A continuous rated current
- Maximum conversion efficiency of 95% (5Vin, 3.3Vout ~200mA output)
- 340kHz switching frequency
- 30mV no-load output ripple
- 0.5% load regulation
- 2.5% voltage regulation
- -40 to +85°C operational temperature range
- Built-in 160°C thermal shutdown
- Dimensions 17x11x3.8mm (0.67×0.43×0.15″)
-
RPM Measurement Sensor Rotational Speed Measuring Module
Original price was: ₨160.00.₨119.00Current price is: ₨119.00. Quick View- Input voltage: 3.3V to 5V
- Output signal: TTL signal, active low
- Pulse frequency range: 0 to 100Hz
- RPM range: 0 to 6000RPM
- Dimensions: 32 x 14 x 7mm
- Weight: 5g
-
High quality heating element for your soldering iron.
-
Goot 30W Soldering Iron Tip Solder Iron Bit R-48B
Original price was: ₨160.00.₨119.00Current price is: ₨119.00. Quick ViewThis is a soldering iron bit for 30W.
-
- Size = 86*40*6.0 mm
- Button = PET
- Max keys = 21 keys
- Power = DC 3.0V
- Battery = 1 X CR2025/160mAH
- Remote Distance 8M
- Voltage = 2.2-3.4V
- Wattage = 30MA TYP
- Transmitted Power = 70MW/SR TYP
- Working Temperature = -10C- +50C
- Tube infrared wavelengths = 940Nm
- Infrared carrier frequency = 38KHz
- Material = 0.125mmPET
- Effective Angle = 60 Degree
- Usage = Audio/Video Players/Car audio/ MP3 /DVD music player
-
- Working voltage: DC 3.3V-5V
- Working current: 20mA
- Operating temperature: -10~+50
- detection distance :2-40cm
- IO Interface: 4-wire interfaces (-/+/S/EN)
- Output signal: TTL level (low level there is an obstacle, no obstacle high)
- Adjustment: adjust multi-turn resistance 8. Effective angle: 35.7.
- Size: 28mmx23mm
-
This clear double-side tape is a double-coated film, consisting of an acrylic adheisve with extremely high adhesion power and high instant tack. Light and moisture resistant. Permanently bonds plastics and metals. Replaces epoxies and other adhesives.?Clean, dry surface is required for maximum bond strength.
-
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
-
Water Level Sensor in Pakistan
Original price was: ₨250.00.₨109.00Current price is: ₨109.00. Quick View-
Operating voltage: DC3-5V
-
Operating current: less than 20mA
-
Sensor Type: Analog
-
Detection Area: 40mmx16mm
-
Production process: FR4 double-sided HASL
-
Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
-
Dimensions: 60mmx20mm
-
-
4 cell 18650 Battery Holder Case
Original price was: ₨220.00.₨109.00Current price is: ₨109.00. Quick View- Battery Type: 18650 Lithium-Ion
- Capacity: 4 Cells (15V output)
- Dimensions: 7.6cm x 8cm x 1.9cm
- Mounting Holes: 2x screw holes
- Weight: 26g
-
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter
Original price was: ₨160.00.₨109.00Current price is: ₨109.00. Quick View- Input Voltage: 2-24V DC
- Output Voltage: 5-28V DC
- Maximum Output Current: 2A
- Switching Frequency: 1.2Mhz
- Output Ripple: <100mV
- Module Size: 37.2mm x 17.2mm x 14.0mm
- About 93% Efficiency
- Features like an under-voltage lockout, thermal overload protection
-
IR Infrared sensor Two way Obstacle Sensor
Original price was: ₨200.00.₨109.00Current price is: ₨109.00. Quick View- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
-
TL084 circuits JFET Input Op-amp
Original price was: ₨200.00.₨109.00Current price is: ₨109.00. Quick View- Input Offset Voltage Options of 6.0 mV and 15 mV Max
- Low Input Bias Current: 30 pA
- Low Input Offset Current: 5.0 pA
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13 V/s
- Low Supply Current: 1.4 mA per Amplifier
- High Input Impedance: 1012
-
Thermal Grease (Standard Pack)
Original price was: ₨134.00.₨107.00Current price is: ₨107.00. Quick ViewThermal grease (also called CPU grease, heat paste, heat sink compound, heat sink paste, thermal compound, thermal gel, thermal interface material, or thermal paste) is a thermally conductive (but usually electrically insulating) compound, which is commonly used as an interface between heat sinks and heat sources such as high-power semiconductor devices. The main role of thermal grease is to eliminate air gaps or spaces (which act as thermal insulation) from the interface area in order to maximize heat transfer and dissipation.












































































