-
Horizontal Float Switch Black
Original price was: ₨470.00.₨349.00Current price is: ₨349.00. Quick View- Material: plastic
- Color: black
- Switch power(Max): 10W
- Switching voltage(Max):AC 100V
- Switching current(Max):AC 0.5A
- Electric strength: AC1500V/Imin
- Contract resistance: 200 milli-ohm
- Temperature rating:-20 ~ +80
- Cable length: About 400 mm / 15.76″
- Float length: 85 mm / 3.35″
-
This kit contains a bulb, bulb holder, DC motor, wires with crocodile clips, cell holder and a switch.
-
5V 2A Power Supply AC/DC Adapter
Original price was: ₨490.00.₨349.00Current price is: ₨349.00. Quick View- Simple to use, just plug in, charge up and play.
- Short circuit, over-voltage and over-current protection.
- Incredibly low fault rates this power supply is a regulated center positive power supply.
- High-quality graded AC to DC power adapter.
- Light in weight and with heavy-duty cable-wire.
- Compatible with Dth, STB, CCTV, toys, broadband, laptop, DVD, tablet, TV tuner card, cordless phones, LCD monitor, scanners, cell phones, printers
-
-
Super Heavy Duty 6F22 9V Camelion
Original price was: ₨500.00.₨349.00Current price is: ₨349.00. Quick View- Frame size: 9V
- Dimensions (L x B x H mm): 26,2 x 17,2 x 48,3
- Weight (g): 36,4
- Electrochemical System: Zinc manganese dioxide/
- Zinc/ammonium chloride
- Nominal Capacity: 450mAh to 4,8V (20C-2 C rated capacity at 25mA continuous drain)
- Nominal Voltage: 9V
- Jacket: Metall
-
DS3231 REAL TIME CLOCK MODULE – RTC
Original price was: ₨1,099.00.₨349.00Current price is: ₨349.00. Quick View- Size: 38mm (length) * 22mm (W) * 14mm (height)
- Operating voltage: 3.3 – 5 .5 V
- DS3231M at the core
- Clock Accuracy: 5ppm 0-40 C
- Two programmable alarms
- Programmable square-wave output
- DS3231M Datasheet
- LIR2032 / CR2032 backup battery holder for uninterrupted time management (battery not included)
- Wiring instructions (with Arduino Uno R3 for example):
- SCL A5
- SDA A4
- VCC 5V
- GND GND
-
50g/100g Solder Wire Dia 0.8 Flux 2% Vectra Green High Tin 70/30 Soldering Wire Roll
Price range: ₨349.00 through ₨729.00 Quick View✅ High Tin 70/30 Composition for Superior Strength
✅ Diameter: 0.8mm – Ideal for Precision Soldering
✅ 2% Flux Core for Smooth and Clean Soldering
✅ Available in 50g & 100g Rolls
✅ Fast Melting with Minimal Residue
✅ High Electrical Conductivity for Reliable Joints
✅ Anti-Corrosion Properties for Long-Lasting Performance
-
The AT89C52 is a lowe power, high performance CMOS 8-bit microcontroller with 8K bytes of Flash programmable and reaseable read only memory (PEROM). The on-chip flash allows the program memory to be reprogrammed in-syetem.
-
- Power: 18W
- Input / Operating Voltage: 12V DC
- Color Rendering Index: >80
- Life: 30000 Hrs.
- Brightness: 1800 Lumens
- Long Life
- High Quality
- Energy Efficient
- Perfectly works on Solar & Battery
-
ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
-
- Input voltage range: 4.5V to 40V
- Output voltage range: 1.25V to 37V
- Output current: up to 3A
- Switching frequency: 150 kHz
- Quiescent current: typically 80 µA
- Thermal shutdown and current limiting
- Digital display: 1602A LCD display
- Display accuracy: 0.1 V
- Dimensions: 62 x 26 x 14mm
-
5A XL4015 Module Adjustable Step Down Buck Converter
Original price was: ₨700.00.₨359.00Current price is: ₨359.00. Quick View- Module nature: non-isolated step-down module
- Rectification: Non-synchronous rectification
- Input voltage: 5V-32V
- Output voltage: 0.8V-30V
- Output current: adjustable Z large 5A
- Conversion efficiency: 95% (Z high)
- Switching frequency: 300KHz
- Output ripple: 50mV (Z large) 20M bandwidth
- Load regulation: 0.5% Voltage regulation: 2.5%
- Operating temperature: -40 C to + 85 C
-
Soldering Iron Vhan 60W Solder
Original price was: ₨450.00.₨359.00Current price is: ₨359.00. Quick View -
MAX30100 Pulse Oximeter Heart Rate Sensor
Original price was: ₨550.00.₨359.00Current price is: ₨359.00. Quick View- 1.8V – 5.5V is its operating voltage.
- I2C is Its interface type.
- 18.8 x 14.4 3 mm is the dimensions of the Heart sensor module.
- Heart Sensor weight is 1.2g.
- The heart sensor module brand is MAX30100.
- The Digital is its Output type.
- The working principle of this sensor is the Biosensor.
- This is a pressure-sensitive and force-sensitive sensor.
- The polymer is its material texture.
-
Activity High Quality 50g or 100g Soldering Wire for Soldering Works
Price range: ₨359.00 through ₨729.00 Quick View- Diameter: 0.031″ (0.8mm)
- Weight: 0.11lbs (50g) or (100g)
- Composition: 70% Tin, 30% Lead
- Rosin Flux Content: 2%
-
5V USB Fast Charging Module
Original price was: ₨600.00.₨359.00Current price is: ₨359.00. Quick View- Operating Voltage: 12 ~ 24VDC
- Supported Fast Charging Protocol: Huawei fast charge protocol FCP with SCP, Samsung fast charge protocol AFC, Spreadtrum Quick Charge Agreement SFCP
- Output Power: 36 Watt
- Output voltage wired compensation
- Conversion efficiency: 90%~97%
- Supports multiple fast-charging protocols
- Input overvoltage, overcurrent, Undervoltage protection
- Output overcurrent, short circuit protection
- Module over-temperature protection
-
BMS 3S 60A 12.6V Cell 18650 Li-ion Lithium Battery Charging BMS Board Balanced Charging Module
Original price was: ₨560.00.₨359.00Current price is: ₨359.00. Quick View- Charging voltage: 12.6 V-13 V
- Overvoltage range: 4.25-4.35 V ± 0.05 V
- Overvoltage range: 2.3-3.0 V ± 0.05 V
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 30A
- Current: less than 30uA
- Internal resistance: less than 45 MΩ
- Service life: more than 50000 hours
- Operating temperature: -40 to + 50 degrees
- Storage conditions: -40 to + 80 degrees
- Size: 41 * 55 * 3.4mm
- Protection against short circuits: protection, self-healing delay
-
Raspberry Pi 3 Official case
Original price was: ₨450.00.₨360.00Current price is: ₨360.00. Quick ViewThis is the official case for the Raspberry Pi 3 Microprocessor provided by the manufacturers of the Raspberry Pi.
-
A distribution board is an electricity supply system which is used to divide electrical power feed into subsidiary circuit while providing complete protection to circuits with fuses and circuit breakers.
-
A3967 Stepper Motor Driver Module
Original price was: ₨400.00.₨360.00Current price is: ₨360.00. Quick ViewThis EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.
-
ESP8266 NodeMCU V1.0 ESP-12E WiFI Module
Original price was: ₨400.00.₨369.00Current price is: ₨369.00. Quick View- Microcontroller: ESP-8266 32-bit
- Clock Speed: 80 MHz
- USB Converter: CP2102
- USB Connector: Micro USB
- Operating Voltage: 3.3V
- Flash Memory: 4 MB
- Digital I/O: 11
- Analog Inputs: 1
- Communications: Serial, SPI. I2C and 1-Wire via software libraries
- WiFi: Built-in 802.11 b/g/n
-
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
-
Buy best quality Universal GPS stand.
-
500mAh rating high discharge LiPo battery.
-
TowerPro Servo Motor SG90 MINI SERVO
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick View- Operating Voltage is +5V typically
- Torque: 2.5kg/cm
- The operating speed is 0.1s/60
- Gear Type: Plastic
- Rotation: 0-180
- Weight of motor: 9gm
- The package includes gear horns and screws
-
A soldering iron is a hand tool used in soldering. The power rating of this soldering iron is 30W.
Features:
- Soldering iron with 30W power and replaceable tip
- Simple soldering of printed circuit boards/components, using the de-soldering suction pump
Convenient storage when not in use - Power supply: 220 to 240V (don’t support 110V)
- RoHS and CE Approved
-
Center Tapped Transformer 220V/15V-0-15V 600MA
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 600MA current. Generally known as a Center tapped transformer.
-
G2R1 is a power relay with a coil rated voltage of 12V. The relay have 5 pins, with good quality and long operational life.
-
Multi-Voltage Adapter 1.5-12 V (0.5A)
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick ViewUniversal AC DC Adapter – AC Input:100-240V 0.25A 50/60Hz, DC Output: 1.5V to 12V and 0.5A. Advanced secure technique, with full PROTECTION of over Voltages/ over Current/ short Circuits/ over Temperature.
-
Soldering Iron Vhan 30W Solder
Original price was: ₨500.00.₨379.00Current price is: ₨379.00. Quick View -
- Product model: 385 DC miniature diaphragm pump
- Normal working time: 2-3 years
- Maximum suction: 2 meters
- Motor length: 32MM
- Motor diameter: 28MM
- Pump length: 36MM
- Total length: 69MM
- Pump diameter: 40MM*35MM
-
Multi-Voltage Adapter 1.5-12 V (0.5A)
Original price was: ₨400.00.₨380.00Current price is: ₨380.00. Quick ViewUniversal AC DC Adapter – AC Input:100-240V 0.25A 50/60Hz, DC Output: 1.5V to 12V and 0.5A. Advanced secure technique, with full PROTECTION of over Voltages/ over Current/ short Circuits/ over Temperature.
-
MQ135 Air Quality Detector Sensor Module
Original price was: ₨540.00.₨389.00Current price is: ₨389.00. Quick View- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
-
Multiturn Variable Potentiometer 5K
Original price was: ₨495.00.₨396.00Current price is: ₨396.00. Quick ViewA potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
-
- Chip: MPU-6050
- Power supply: 3v-5V
- Gyroscope range: + 250 500 1000 2000/ s
- Acceleration range: 2 4 8 16 g
- Communication: Standard IIC communication agreement
- Chip built-in 16 bit AD converter, 16 bits of data output
- Pin Pitch 2.54 mm
- SIZE: 20.3mm x 15.6mm
-
MQ7 MQ-7 Gas Sensor Detection Module
Original price was: ₨450.00.₨399.00Current price is: ₨399.00. Quick View- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
-
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
-
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.
-
GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module
Original price was: ₨490.00.₨399.00Current price is: ₨399.00. Quick ViewA 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.
-
- Rated Load: 10Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
- Output Impedance: 1000±10% Ω
- Maximum working voltage: 15V DC
- Operating temperature range: -20~60°C
- Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L X W X H)
-
5v 2A Adapter Power Adapter 5V 2000mA
Original price was: ₨600.00.₨399.00Current price is: ₨399.00. Quick ViewPower adapter output rating is 5 volts and 2000 mili amperes.
Input
100-240V AC 50/60HzOutput
DC 5V 2A(max)Power
10WattCable Cord Length
6.5Ft (2m)Color
Black -
3.7V 500mAH Lithium Polymer Battery
Original price was: ₨499.00.₨399.00Current price is: ₨399.00. Quick View3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo or Lipoly batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in GPS, DVD, ipod, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
-
Stepper Motor NEMA 17 Refurbish
Original price was: ₨500.00.₨399.00Current price is: ₨399.00. Quick View- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
-
8051 Atmel AT89C51 Microcontroller 8-bit
Original price was: ₨500.00.₨399.00Current price is: ₨399.00. Quick View- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
8×8 Dot Matrix MAX7219 MCU Control Display Generic Module
Original price was: ₨550.00.₨399.00Current price is: ₨399.00. Quick View- Operating Voltage: 4.7V 5.3V
- Operating Current: 320mA
- Max Operating Current: 2A
- Display type: LED
- Mounting: THT
- Display type: Matrix
- Display resolution: 8×8
- Color: Red
- Common electrode: Cathode
-
12 Volts Double Pole Double Throw relay. It is often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage.
-
G2R1 is a power relay with a coil rated voltage of 24V. The relay have 5 pins, with good quality and long operational life.
-
Solid state relays have no moveable contacts. The primary advantage over a mechanical relay is that there are no switching contacts to physically wear out. PCB mount Solid State Relays are an excellent choice for high frequency switching applications in Factory Automation, I/O Modules or for control inputs from a position controller.










































































