-
Bridge rectifier diode with a 6A current rating.
-
KBPC3502 Bridge Rectifier Diode 35A 200V
Original price was: ₨200.00.₨179.00Current price is: ₨179.00. Quick ViewBridge rectifier diode with a 35A current rating.
-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×3 type 12 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipment’s, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed.
-
An 8GB small card hard drive.
-
- Capacities1: 32GB
- Speed 3:
- 32-128GB – 10MB/s – 20MB/sread
- Dimensions: 44.9mm x 20mm x 9.2mm
- Operating Temperature: 0C to 60C
- Storage Temperature: -20C to 85C
- Compatible with: Windows10, Windows 8.1, Windows 8, Windows 7.1 (SP1), Mac OS v. 10.9.x+, Linux v. 2.6.x+, Chrome OS
-
- Using 5050 full-color LED.
- RGB tricolour current一limiting resistance to prevent burnout.
- Through the PWM adjusting three primary colors can be mixed to obtain different colors.
- With a variety of single一chip interfaces.
- Working Voltage: 5V.
- LED Drive Mode: Common cathode driver.
-
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression
-
L293E Push-Pull Four Channel Drivers
Original price was: ₨240.00.₨220.00Current price is: ₨220.00. Quick View- OVERTEMPERATURE PROTECTION
- OUTPUT CURRENT 1A PER CHANNEL
- INHIBIT FACILITY
- PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive)
- SEPARATE LOGIC SUPPLY
- HIGH NOISE IMMUNITY
-
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm -
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
-
Large 20mm LDR Photoresistor Sensor Photo Sensor
Original price was: ₨300.00.₨149.00Current price is: ₨149.00. Quick View- Diameter: 20mm
- Max Voltage: 500V
- Max power consumption: 500mW
- Operating Temperature: 30+70C
- Light Resistance: 5-100K ohm
- Dark Resistance: 1-8M ohm
-
Laser Diode Module 650nm 5v Laser Light Module Ky008
Original price was: ₨180.00.₨99.00Current price is: ₨99.00. Quick View- Voltage: 3.0 V – 5 V.
- Output: red laser straightly(650nm).
- Driver: APC circuit.
- Size: Φ 12.0 x35mm.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating temperature: -36 ~ 65◦C.
- Pot size: 15 meters spot for φ10 mm ~ φ15.
- Outer diameter: 6 mm.
-
LCD Green 20×2 display module (JHD202C)
Original price was: ₨315.00.₨252.00Current price is: ₨252.00. Quick View- Color of display: Green
- Color of character: Yellow
- Size : 20 x 2 (20 character x 2 rows)
- Input voltage: +5V
- Supply current: 1.5mA
- Board dimensions : 116mm x 38mm (LxB)
- Display dimensions : 83mm x 19mm (LxB)
-
LCD I2C Module IIC/I2C Serial Interface Adapter
Original price was: ₨300.00.₨219.00Current price is: ₨219.00. Quick View- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
-
LCR T4 Transistor Tester ESR Meter
Original price was: ₨3,600.00.₨1,999.00Current price is: ₨1,999.00. Quick ViewSpecifications:
Material: Printed circuit board
Power Mode: 6F22
Display: 128 * 64 LCD backlight
Testing Speed: 2 seconds (1 minute is normal for large capacitor)
Shutdown Current: 20nA
Displayed Value: 25pf-100mF (resolution 1pF)
Inductance: 0.01mH-20H
Resistance: 2100
Power Volatge: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack
Resolution of Resistance Measurement: 0.1 ohms
The Highest Measured Value: 50M ohms
Provided Testing Current: Approx. 6mA
-
- Camera Exposure control
- Auto slide focus dual cell
- Photocopy machines density of toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales dual cell
- Automatic gain control modulated light source
- Automated Rear View Mirror
-
-
Led High Light Led Bar Light 4V 18 Led Smd Led Strip Light
Original price was: ₨70.00.₨59.00Current price is: ₨59.00. Quick View- voltage: DC 4V
- Stand material: High quality aluminum
- chip : 5730 6led
- color: white
- size:4cmx1.5cm
- life:>50000hours
-
LED Industrial Signal Tower Light 3 Colors Flash LED Light Warning Lamp for CNC Machines
Original price was: ₨5,400.00.₨2,799.00Current price is: ₨2,799.00. Quick View- Made of high-quality material and an LED bulbs, this warning light is durable.
- High brightness LED light sources can attract more attention.
- Low power consumption, low heat, long lifespan.
- Normally-on type lighting in red, orange, and green color.
- Suitable for workshop, construction site, factory, sentry box, etc.
-
High quality casing in minimal cost.
-
Features:
- Super bright light source: Our 5 inch LED light bar contains 24pcs * 3W LEDs and emits 6000K brilliant white light.
- Excellent performance: It is made of aluminum diecasting housing and unbreakable PC lens. Waterproof, dustproof and rustproof ensure that these lights are very durable to use.
- High efficient cooling: The design system of multilayer heat sink solves the problem of heat after longtime working. Effectively extend the Bar’s life-span to over 50,000 hours.
- Wide applications: 10-48V wide range voltage can apply to different types of vehicles and devices such as Heavy Duty, SUV, ATV, UTV, Truck, Car, Boat, Marine etc.
- Easy installation: It is easy to install with the mounting brackets included in our item.
-
LED SMD 5m Strips Blue color:
*Easy to Use:
Self-glue back with tape for protected and simple application.
* Cuttable and attachable:
Each 3 LEDs along the cut imprints and, without harming the rest strips.
* Flexible:
Slight and, conservative and adaptable PCB strip.
* Eco-friendly:
Low power utilization and, very brilliant however having in low temperature.
-
LED SMD Strip 5m Size In Green Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View- Weather-resistant IP65 Adhesive back 3M Brand
- Clear silicone strip 10×2.8mm Total Length 5 Metres
- Can be cut into 50mm lengths with 3 LEDs each.
- 450 Lumens/M, 500mA/M, 60 LEDs/M (per metre)
- LED 5050×300 total. CE, ROHS, and UL certified
- Terminates to two wires. 12Vdc @ 3A Total 5M
- 450 lumens per meter
- 10mm wide x 2.8mm high
-
LED SMD Strip 5m Size In Red Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View- Working Voltage: DC12V
- LED Type: SMD5050/SMD2835
- LED Quantity: 60leds/m, 120leds/m, 5 meters/rollWidth : 8mm (SMD2835) /10mm (SMD5050)
- Protection Rate : Waterproof IP65 /Non waterproof IP20
- Color: Red
- Is Dimmable: Yes (dimmer switch required, but not included)
- Is Trimmable: Yes (cuttable every three LEDs)
- View angle: 120~140
- Working Temperature: -20C to 50 C
-
LED SMD Strip 5m Size In White Color
Original price was: ₨899.00.₨799.00Current price is: ₨799.00. Quick View -
LED Tester Pen Light Screwdriver Multifunction Dual LED AC-DC High-Brightness
Original price was: ₨1,150.00.₨789.00Current price is: ₨789.00. Quick View- Measuring range: 70-250V
- Nib material: 45 steel
- Shell material: ABS
-
The LF33CV is a very low drop voltage regulator. It has an output voltage of 3.3 V and a output current of 500 mA. Input voltage range 2.5V to 16V. It is suitable for low noise, low power applications and specially in battery powered systems.
-
Light Sensitive LDR Relay Module 12V
Original price was: ₨600.00.₨469.00Current price is: ₨469.00. Quick View- Automatically controls the relay based on light intensity
- Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
- Adjustable light level set-point
- Controls loads of 115/230VAC @ 10A
- Controls loads of 0 15VDC @ 10A
- Both NO (Normally Open) and NC (Normally Closed) contacts
- LED indicator when the relay is energized
- 12V power operation
-
LiitoKala Lii-500 18650 Smart Battery Charger LCD Display
Original price was: ₨8,000.00.₨5,799.00Current price is: ₨5,799.00. Quick View– 4 independent charging channels with built-in micro-computer management system to ensure the high efficiency
– USB output function: Built with 5V / 1000mAh output
– 300mA / 500mA / 700mA / 1000mA charging current for selection
– CC / CV charge mode to maintain a constant current flow and protect battery and users’ safety
– full Fledged LCD display with a variety of info
– Refresh function for 0V battery
– Quick test mode – 4 channels detect the battery capacity quicker than the Nor mode
– Identifies broken batteries, 0V rechargeable battery activation, can’t charge 1.65 – 1.85V batteries
– Protections: over-charge, over-discharge, reverse polarity, short circuit protections, temperature control
– Charging between 1.65 – 2.2V / bad battery recognition and activation
-
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
-
Specification:
- Minimum Capacity: 1000mAh
- Battery Voltage: 11.1V / 3Cell
- Constant Discharge: 25C (25Amps)
- Peak Discharge (10sec): 35C (66Amps)
- Pack Weight: 141g
- Pack Size: 78 X 33 X 19mm
- Charge Plug: JST-XH
Weight
:
<b>141 GRM
-
Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high temperature condition.
- Don’t throw it into fire.
- Don’t throw it into water.
-
TCB 2200mAh 11.1V 25C 3S Lipo Battery XT60 Plug For RC Models
-
Oriainal Lion Power Lipo Battery 11.1V 2200Mah 25C MAX 40C T Plug for RC Car Airplane Align Trex 450 Helicopter Part
-
Features:
The Turnigy 2650mAh Transmitter pack fits snuggly into any Futaba or Jr radio which uses a 4×4 AA cell battery configuration
-
Features:
Black Magic 2700mAh 11.1V 25C LiPo Battery for DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time, enjoy more flight fun!
-
Features:
For DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time
Suitable for CX-20, Quanum Nova Quadcopter
Special for DJI PHANTOM 1 and FC40 Quadcopter,improve about 30% flight time than original battery
Well-designed,have a special handle for take out the battery easily -
3S 11.1V 3300mah 35C?Lipo Battery with hardcase?For 1/10th RC Car Boat ?.
-
Capable of maximum continuous discharge rates up to 25C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance.
-
LiPo 11.1V 3S 2200mAH
Original price was: ₨6,000.00.₨5,499.00Current price is: ₨5,499.00. Quick View- Name: LiPo Battery
- Quantity: 1 Piece
- Capacity: 2200mAh
- Type: Lithium Polymer
- Voltage: 11.1V/3S
- Burst Rate : 25C
- Continuous discharge rate: 25C
- Cells : 3
- Size : 85 x 40 x 27 mm
- Weight: 180g
- Max Burst Discharge: 60C
- Charge Voltage: 12.6V
- Discharge Plug: T Plug, Balance charger plug
-
Features:
Capable of maximum continuous discharge rates up to 50C,burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there?s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
-
Battery item: LION Power 7.4V 90M 25C
Capacity:900mAh
Continuous discharge rate:25C
Size: Length 57mm x Width 30mm x Height 14mm
Plug style: Blance charger,T Plug
Colors: Standard Colors -
-
Capable of maximum continuous discharge rates up to 30C, burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there’s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models
-
-
This is the lowest cost of Lithium Polymer (LiPo) rechargeable battery that we have ever carried, so that it is affordable for students to use in their projects instead of using the disposable 9V battery that cannot be recharged. It is suitable for low power consumption usage such as circuit board, sensors and micro size DC motors.
-
Lithium Battery 12V 2.2 Amp 2200mah With BMS
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick View- A 12V and 2.2A rating battery with a Battery Management system to have balanced charging and discharging through every cell of the battery.
- It’s a universal/multipurpose battery also used as WIFI routers, Power Bank, ETC.
- You can also customize lithium batteries as per your requirements.
-
Lithium Battery 3S 12V 10A Charge Protection Board BMS
Original price was: ₨350.00.₨209.00Current price is: ₨209.00. Quick View- Model: 3S 10A BMS
- Size: 50 * 16 * 1.0mm
- Short circuit protection: protection, self-recovery delay.
- Input voltage: 12.6V
- Over-charge voltage range: 4.25-4.35v 0.05v
- Over-discharge voltage range: 2.3-3.0v 0.05v
- Maximum operating current: 5-8A
- Overload voltage range: 4.25-4.35 v 0.05 v
- Overpressure voltage range: 2.3-3.0 v 0.05 v
- Maximum instantaneous current: 9-10A
- Operating temperature: -40 — +50
- Storage conditions: -40 — +80
- Quiescent current: less than 6uA
- Internal resistance: less than 60m
-
- Battery Type: Coin Battery
- Model: CR1616
- Battery Model: Lithium 3V Coin Battery
- Country of Origin: China
- Package Type: On a Card
- Battery Reference :CR1616, DL1616, DL1616BPK
-
LM-337 LM337 Variable Negative -VE Voltage Regulator IC
Original price was: ₨65.00.₨39.00Current price is: ₨39.00. Quick View- Used for Positive voltage regulations
- Variable power supply
- Current limiting circuits
- Reverse polarity circuits
- Commonly used in Desktop PC, DVD and other consumer products
- Used in motor control circuits
-
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00. Quick ViewProximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
-
- Internally frequency compensated for unity gain
- Large DC voltage gain 100 dB
- Wide bandwidth (unity gain) 1 MHz (temperature compensated)
- Very low supply current drain (700 A) essentially independent of supply voltage
- Low input biasing current 45 nA (temperature compensated)
- Low input offset voltage 2 mV and offset current: 5 nA
- Input common-mode voltage range includes ground
-
LM2596 Dual USB Module DC 6V 40V To 5V 3A
Original price was: ₨799.00.₨399.00Current price is: ₨399.00. Quick ViewLM2596 Dual USB Module Specifications:
- Input: 6V-40V
- Output: 5V / 3A (MAX)
- Efficiency: 92% (MAX)
- Switching frequency: 150KHZ
- Working temperature: -40 + 85
- Baby Size: L: 59mm x W: 21mm x H: 17mm
- Load capacity: Maximum output 3A
- Applications: mobile power, mobile phones, USB-powered devices.
- Output Port: Double USB
-
lm2596 Module DC/DC Step-Down
Original price was: ₨300.00.₨149.00Current price is: ₨149.00. Quick View- Input voltage: 4-35V
- Output Voltage: 1.5-35V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 to +85) (output power 10W or less)
- Full load temperature rise: 40
- Load regulation: 0.5%
- Voltage regulation: 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
-
- Input voltage range: 4.5V to 40V
- Output voltage range: 1.25V to 37V
- Output current: up to 3A
- Switching frequency: 150 kHz
- Quiescent current: typically 80 µA
- Thermal shutdown and current limiting
- Digital display: 1602A LCD display
- Display accuracy: 0.1 V
- Dimensions: 62 x 26 x 14mm
-
- 3.3V, 5V, 12V, and adjustable output versions
- Adjustable version output voltage range, 1.2V to 37V ±4% max over line and load conditions
- Available in TO-220 and TO-263 packages
- Guaranteed 3A output load current
- Input voltage range up to 40V
- Requires only 4 external components
- Excellent line and load regulation specifications
- 150 kHz fixed frequency internal oscillator
- TTL shutdown capability
- Low power standby mode, IQ typically 80 µA
- High efficiency
- Uses readily available standard inductors
- Thermal shutdown and current limit protection
-
- Operates from single 5V supply
- Input current: 150 nA max. over temperature
- Offset current: 20 nA max. over temperature
- Differential input voltage range: 30V
- Power consumption: 135 mW at 15V
- Available in Q-Temp Automotive
- High-Reliability Automotive Applications
- Configuration Control and Print Support
- Qualification to Automotive Standards
-
The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.
-
LM324 Operational Amplifier IC LM-324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages. Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902) Dual Supplies: 1.5 V to 16 V (13 V for LM2902) Low Supply-Current Drain.
-
LM338T 5A Adjustable Voltage Regulator LM-338T
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick ViewLM338T 5A Adjustable Voltage Regulator LM-338T is adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5 A over a 1.2-V to 32-V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage.
-
- Four individually operated voltage comparators
- Low noise interference among comparators
- Single Supply Operation: +3.0 V to +36 V
- Dual Supply Operation: +18V and -18V
- Low Input Bias Current: 25 nA
- Low Input Offset Current: 5.0 nA
- Low Input Offset Voltage
- Input Common Mode Voltage Range to GND
- Low Output Saturation Voltage: 130 mV @ 4.0 mA
- TTL and CMOS compatible
- ESD Clamps on the inputs increase reliability without affecting device operation
- Pb Free, Halogen Free/BFR Free and RoHS compliant
-
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output































































































