-
-20%
MY2 is a power relay with a coil rated voltage of 220V. The relay have 8 pins, with good quality and long operational life.
-
-26%
This is an electric switch which is operated by means of a projecting lever that is moved up and down. This is a two position toggle switch i.e. On and Off.
-
This is a rectangular shape fuse holder.
-
-34%
TSOP 1738 Sensor IR Receiver Plastic (SM0038)
Original price was: ₨90.00.₨59.00Current price is: ₨59.00. Quick View- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length 10 cycles/burst
-
Color:
BlackAcceptable Fuse Size:
6x30mmPermissible Temp. With / Without load:
-20°Cto +85°CH. V. Break Down for 1 minute:
2 KVACInsulation Resistance at 500VDC:
1000 MohmFuse Holder Size (Dia. x Length):
17 x 48mm -
-20%
Out Of Stock8 inch 7 segment display 8 inch seven segment led display
Original price was: ₨81.00.₨65.00Current price is: ₨65.00. Quick View- 8 inch 7 segment Display side pin
- Common anode 7 segment display
- Common cathode 7 segment display
- I.C. compatible
- Low Power Consumption
- High Brightness
- RoHS compliant
- Excellent Color and product Uniformity
- Excellent aesthetic look and Character Appearance
- Easy Mounting on PCB or Sockets
- Low Current Operation
- Excellent digit appearance
- Wide viewing angle
-
Out Of StockThis tiny speaker is the perfect addition to any small audio project where you need an8impedance.
-
Arduino jumper wire, male to male connector.
-
Arduino jumper wire, male to male connector.
-
- Adopt 0.36 inch 2-digit common anode Nixie tube
- Adopt low-level signal control for Nixie tube segment / bit-choice
- Connect VCC to the power supply, GND to ground, segment terminal a, b, c, d, e, f, d, up to single-chip I/O port.
- Notice: Forbid connect segment terminal to ground, otherwise, the Nixie tube segment terminal will be destroyed;
- Connect a bit-choice terminal to C1 and connect C2 to a single-chip I/O port
- With LED indicator, it will be turned on when powered on
-
This NPN Bipolar Darlington Transistor is designed for use in switching applications, such as print hammer, relay, solenoid and lamp drivers.
-
-8%
ESP-01 Adapter Module 3.3-5V
Original price was: ₨270.00.₨249.00Current price is: ₨249.00. Quick View- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
-
-20%
Out Of StockHigh sensitivity suitable for illumination applications, embedded applications. This module comes with standard SCCB interface compatible with I2C interface.
-
-29%
Propellers 8045(8X4.5) ABS Props have high quality propellers especially designed for multi copters. Black Propellers 8045(8X4.5) ABS Props has 15 degree angle design in the end of the propeller to avoid whirlpool multi copter flying. The Propellers 8045(8X4.5) ABS Props are light in weight and have high strength propellers. These are used in the drones as well as multi copters . The props have light weight, to help improve the air-powered efficiency and aero foil stability.
-
-11%
Out Of StockMini Metal Gear Motor (6V 60RPM)
Original price was: ₨840.00.₨750.00Current price is: ₨750.00. Quick View6V 60Rpm Geared DC Motor is a mini geared motor with high torque capability despite its small size and because of that it is very suitable for small sized projects that require high torque such as sumo robots. The motor runs at 60rpm at 6V. It is suggested not to run the motor at voltages higher than 6V.
-
The limit switch gives an ON/OFF output that corresponds to a valve position. Limit switches are used to provide full open or full shut indications, which gives a typical linear limit switch operation.
-
-6%
Out Of Stock12V Solenoid lock has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet, safe or door.
-
This IC is a 16-Bit SPI I/O Expander with Serial Interface. This IC has 25mA sink/source capability per I/O.
-
-47%
Raspberry Pi TFT 3.5″
Original price was: ₨6,800.00.₨3,599.00Current price is: ₨3,599.00. Quick ViewThis is a portable 3.5″ resistance touchscreen designed for Raspberry Pi b+, Raspberry Pi 2 and Raspberry Pi 3. All the Raspberry Pi GPIO are accessible through pin headers at the side of the screen.
-
-16%
Center Tapped Transformer 220V/15V-0-15V 600MA
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 600MA current. Generally known as a Center tapped transformer.
-
-15%
Center Tapped Transformer 220V/15V-0-15V 400MA
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 400MA current. Generally known as a Center tapped transformer.
-
A type of fastener, for holding items together, primarily electrical cables or wires. This is 12″ long in length.
-
Soldering wire is used for creating a robust connection between two wires or to join electronic components of all kinds to a printed circuit board.
-
-24%
5V 6A 6000mAh Adapter With Power Cord
Original price was: ₨1,250.00.₨949.00Current price is: ₨949.00. Quick View- Input: 100 – 240V AC 50/60Hz
- Output: DC 5V 6A
- Max Wattage: 30W
- DC Jack Converter: 5.5 x 2.5mm (Compatible with 5.5×2.1mm DC Port)
- DC Cable Length: about 110cm
- AC Power Cord: about 110cm with US Plug
- Pole of DC Plug: Center Positive(+), Outside Negative (-)
- Condition: Brand New 100%
-
These awesome little 5 amp units are perfect to use in conjunction with Actobotics components.
-
This thyristor is intented for use in applications requiring good bidirectional blocking voltage capability, high surge current capability and high thermal cycling performance.
-
These Zero Insertion Force (ZIF) sockets clamp onto a chip, making a good electrical connection, when you push the lever down. When you release the lever, it releases the chip. This allows you to repeatedly insert or remove a chip from the socket without damage to either. These are great for two situations: When you want to replace the chip that goes in a given place frequently, or when you want to program one chip after another in the same fixture.
-
BC327 is a PNP bipolar junction transistor which is mainly designed for general purpose, small signal and switching applications.
-
This Power MOSFET provides the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
N-Channel Power MOSFET provide the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
-45%
The?BTA41 is a 3-pin Standard Insulated?TRIAC?for general purpose AC switching and can be used as ON/OFF function.
-
8051 is an 8-bit family of microcontrollers developed by Intel. This microcontroller was also referred as a system on a chip because it has 128 bytes of RAM, 4K bytes of ROM, 2 Timers, 1 Serial port, and four ports on a single chip. The CPU can work for only 8 bits of data at a time because 8051 is an 8-bit processor. In case the data is larger than 8 bits then it has to be broken into parts so that the CPU can process conveniently.
-
-13%
The AT89C52 is a lowe power, high performance CMOS 8-bit microcontroller with 8K bytes of Flash programmable and reaseable read only memory (PEROM). The on-chip flash allows the program memory to be reprogrammed in-syetem.
-
The 4N25 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a photo-transistor.
-
-12%
TB6560 Stepper Motor Driver IC
Original price was: ₨1,050.00.₨929.00Current price is: ₨929.00. Quick ViewThe latest 3rd generation TB6565 Stepper Driver has been upgraded to the intelligent, professional and industrial-level drive, embedding intelligent memory chip and upgrading the external manual control tools.
-
-34%
IR2110 Mosfet & IGBT Gate Driver IC
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewThe IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
-
TC 4427 is a dual high speed power mosfet driver. ThIS device IS highly latch-up resistant under any conditions within their power and voltage ratings. All terminals are fully protected against Electrostatic Discharge (ESD).
-
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
-
These Zero Insertion Force (ZIF) sockets clamp onto a chip, making a good electrical connection, when you push the lever down. When you release the lever, it releases the chip. This allows you to repeatedly insert or remove a chip from the socket without damage to either. These are great for two situations: When you want to replace the chip that goes in a given place frequently, or when you want to program one chip after another in the same fixture.
-
-11%
CD4033 is a simple decoder IC that is commonly used to drive Seven segment displays.
-
-18%
9N90 is a N-Channel enhancement mode power mosfet.
-
It is an integrated circuit that converts the signals from the RS232 serial port to the proper signal which is used in the TTL compatible digital logic circuits. The MAX232 can convert the signals like RX, TX, CTS, and RTS and it is a dual driver/receiver.
-
The Exclusive OR gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N-Channel and P-Channel enhancement mode transistors. All inputs are protected against static discharge with diodes to VDD and VSS.
-
The TL431 is three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5 V) and 36 V, with two external resistors. These devices have a typical output impedance of 0.2 .
-
-38%
MOSFET (metal-oxide-semiconductor field-effect transistor, pronounced MAWS-feet) is a special type of field-effect transistor (FET) that works by electronically varying the width of a channel along which charge carriers (electrons or holes) flow. The wider the channel, the better the device conducts. The charge carriers enter the channel at the source and exit via the drain. The width of the channel is controlled by the voltage on an electrode called the gate, which is located physically between the source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.
-
2N4401 is an NPN bipolar junction transistor that is mainly designed for general purpose, small signal, and switching applications.
-
2N5551 is an NPN amplifier Transistor with an amplification factor (hfe) of 80 when the collector current is 10mA. The transistor is commonly used for amplification of audio or other low power signals.
-
- Guaranteed zero reading for 0 V input on all scales
- True polarity at zero for precise null detection
- 1pA typical input current
- True differential input and reference, direct display drive – LED lCL7107
- Low noise – less than 15 VP-P
- On-chip clock and reference
- Low power dissipation – typically less than 10mW
- No additional active circuits required
- Enhanced display stability
- Pb-free (RoHS compliant)