-
-24%
Out Of Stock- Dimensions: 40 x 40 x 20mm
- Noise: 18DB
- Voltage: 12V
- Speed: ~4000RPM
- Airflow: ~20CFM
- Current: 0.10A
-
-29%
Out Of StockEdison EdMat Activity Mat
Original price was: ₨3,500.00.₨2,499.00Current price is: ₨2,499.00. Quick ViewThe barcodes included on the map are:
- Sumo wrestle
- Bounce in borders
- Clap controlled driving
- Line tracking
- Avoid obstacles
- Follow torch
-
-8%
This Tri-state bi-directional transceiver utilize advanced silicon-gate CMOS technology and is intended for two-way asynchronous communication between data buses. They have high drive current outputs which enable high speed operation even when driving large bus capacitances. The circuit possess the low power consumption of CMOS circuitry, yet have speeds comparable to low power Schottky TTL circuits.
-
-19%
Out Of StockThe AD7528 is a monolithic dual 8-bit digital/analog converter featuring excellent DAC-to-DAC matching. It is available in skinny 0.3″ wide 20-lead DIPs and in 20-lead surface mount packages. Separate on-chip latches are provided for each DAC to allow easy microprocessor interface.
-
-24%
- Name: Wire Strippers
- Weight:145g
- Color: As Picture Shown
- Package Content: 1* Wire Stipples
- Mode Number: YTH-1042
- 26,24,20,18,16AWG settings
- 0.2,0.35,0.5,0.9,1.25 MM settings
-
-21%
Out Of Stock- HP2730 Opto Coupler IC
- Number of Channels: 2
- Voltage – Isolation: 2500 Vrms
- Current Transfer Ratio (Min): 300% @ 1.6 mA
- Turn On / Turn Off Time (Typ): 300 ns, 5 s
- Input Type: DC
- Output Type: Darlington
- Voltage – Output (Max): 7 V
- Current – Output / Channel: 60 mA
- Voltage – Forward (Vf) (Typ): 1.3 V
- Current – DC Forward (If) (Max): 20 mA
- Operating Temperature: -40C to 85C
- Mounting Type: Through Hole
- Package: 8-DIP (0.300″, 7.62mm)
-
-33%
Out Of Stock9V 0.5A Adapter Power Adapter 9V 500mA
Original price was: ₨370.00.₨249.00Current price is: ₨249.00. Quick View- Input: AC100 – 240 V 50 / 60Hz
- Output: DC9 V, 500 mA
- DC: 24 AWG, copper, cable length: 1 , 2 m
- DC Jack: 5.5 x 2.1 x 10 mm
-
-19%
Out Of StockThis 1.5V, LR-1130 Alkaline battery is a small button cell which commonly found in small electronic devices like calculators, watches, scales and small low drain electronic toys. These button cells have a good shelf life and when used in low drain electronic will not need to be replaced at regular intervals. They are also designed to go sustained periods of disuse without losing power.
-
-20%
Out Of StockCR1220 3V LITHIUM COIN CELL BATTERY
Original price was: ₨41.00.₨33.00Current price is: ₨33.00. Quick View- Durable
- High Quality
- Long Battery Performance
- Model CR1220
- Lithium Battery
- Common for Watch, Calculator Camera. Toy and other
- Packing May Changed
- Button Cell
-
- 100% brand new !
- Provide excellent continuous power.
- Can be used with toys, calculators, laser pointers, calculators, cameras, clocks, watches, computers, games, digital cameras, camcorders, PDAs, remote controls, electronic instruments, MP3 players, digital voice recorders, blood glucose meters, cholesterol testing meters, LED lights and other electronic appliances.
- High energy density, long life expectancy.
- Also known as: 1216, DL1216, BR1216, ECR1216, 5034LC, LM1216
-
-19%
Out Of Stock1620 Lithium Button Coin Cell Battery 3V CR1620
Original price was: ₨36.00.₨29.00Current price is: ₨29.00. Quick ViewMaxell 1620 Lithium 3V Button Coin Cell Battery. This batteries are used in multiple devices like Watches, Car Remotes, Measuring Instruments, Weighing scales, Glucose meters, Remotes, Industrial Instruments etc.
-
- Battery Type: Coin Battery
- Model: CR1616
- Battery Model: Lithium 3V Coin Battery
- Country of Origin: China
- Package Type: On a Card
- Battery Reference :CR1616, DL1616, DL1616BPK
-
- High Voltage Type (20V Rating)
- 3-State Parallel Outputs for Connection to Common Bus
- Separate Serial Outputs Synchronous to Both Positive and Negative Clock Edges for Cascading
- Medium Speed Operation – 5MHz at 10V (typ)
- Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
- Noise Margin (Over Full Package/Temperature Range) – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V
- 5V, 10V and 15V Parametric Ratings
-
- High Speed Binary Ripple Carry Counter
- Separate Reset Input Pin
- Wide Operating Voltage Range: 2.0 to 6.0 V
- Output Drive up to 10 LS-TTL Loads
- Equivalent to CD4060
-
-29%
Out Of Stock- Rated power 10mW at 25°C
- R (Ω) at 25°C: 100.0K ± 1%
- B-value 25°-85°C: 4665K ± 1%
- Dissipation Factor: 2
- Thermal Time Constant: 15
- Operating Temperature Range °C: –50°C to +110°C
-
- High-Voltage Types (20V Rating)
- CD4071BMS Quad 2-Input OR Gate
- CD4072BMS Dual 4-Input OR Gate
- CD4075BMS Triple 3-Input OR Gate
- Medium Speed Operation: tPHL, tPLH = 60ns (typ) at 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
- Standardized Symmetrical Output Characteristics
-
-25%
Out Of Stock3.7V 250mAh Li Polymer Battery 502030
Original price was: ₨400.00.₨299.00Current price is: ₨299.00. Quick View1> 100% brand new2> High quality and high capacity!3>Built-in protection circuit PCM to prevent overcharging or over-discharging4> Size: 5mm(H)*20mm(W)*30mm(L)5> Rating: DC3.7V 250mAh -
- Supply voltage ranges from 3v to 18v
- Set-up-time is 150, 70, and 40ns at 5v, 10v, and 15v respectively
- Strobe pulse width is 400, 160, and 100ns at 5v, 10v, and 15v respectively
- Hold time is zero
- 100% tested for quiescent current at 20v
- Having high input current of 1uA (max.) at 18v
- Maximum output current sourcing of 25mA
- Operating temperature ranges from -40 C to 85 C
- Storage temperature ranges from -65 C to 150 C
-
-18%
This is a IC Socket/Base for 28 pin SMD PLCC IC. This is a SMT base and is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC’s.
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
-20%
3.7V 500mAH Lithium Polymer Battery
Original price was: ₨499.00.₨399.00Current price is: ₨399.00. Quick View3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo or Lipoly batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in GPS, DVD, ipod, Tablet PC, MP4 Player, Power Bank, Mobile Backup Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
-
-37%
- Small Signal NPN Transistor
- Current Gain (hFE), typically 50 for small signal
- Continuous Collector current (IC) is 800mA
- Collector-Emitter voltage (VCEO) is 50 V
- Collector-Base voltage (VCB0) is 75V
- Emitter Base Voltage (VBE0) is 6V
- Turn on time is 40ns
- Turn off time is 250ns
- Available in To-92 Package
-
-15%
IRFP250 N-channel Power MOSFET
Original price was: ₨280.00.₨239.00Current price is: ₨239.00. Quick View- Repetitive Avalanche Ratings
- Dynamic dv/dt Rating
- Hermetically Sealed
- Simple Drive Requirements
- Ease of Paralleling
- Type Designator: IRF250
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
-
- Low saturation voltage
- Simple drive requirements
- High safe operating area
- For low distortion complementary designs
- Easy to carry and handle
-
The Bipolar Power Transistor is designed for use in general purpose amplifier and switching applications.
-
TIP122 transistor designed for general purpose amplifier and low speed switching applications.
-
- Type –NPN
- Collector-Emitter Voltage: 60V
- Collector-Base Voltage: 60V
- Emitter-Base Voltage: 5V
- Collector Current: 3A
- Collector Dissipation – 30W
- DC Current Gain (hfe) –40 to 320
- Transition Frequency – 5 MHz
- Operating and Storage Junction Temperature Range -55 to +150C
-
-46%
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
-
C1383 is a Bipolar NPN type transistor which is used for low-frequency power amplification and driver amplification.
-
-30%
Out Of StockArduino Pro Micro 5v 16m Atmega32u
Original price was: ₨2,000.00.₨1,399.00Current price is: ₨1,399.00. Quick View- ATMEGA32U4 chip
- Supply Voltage: 5VDC
- Frequency: 16Mhz
- Four 10 bit ADC pins
- 12 pins Digital I/O
- Dimension: 33mm x 18mm
-
- 2sc925 well known as C945 NPN transistor.
- Max Voltage Collector Emmiter=50 V.
- Max Collector current=150 mA.
- Collector power dissipation: 400 mW.
- Japanese High-frequency amplifier NPN Transistor.
- Current Gain (hFE) is 70 to 700 (high linearity).
- Continuous Collector current (IC) is 150mA.
- Collector-Emitter voltage (VCEO) is 50 V.
- Collector-Base voltage (VCB0) is 60V.
- Emitter Base Voltage (VBE0) is 5V.
- Transition Frequency is 150MHz.
-
- Type – NPN
- Collector-Emitter Voltage: 25 V
- Collector-Base Voltage: 30 V
- Emitter-Base Voltage: 7 V
- Collector Current: 0.05 A
- Collector Dissipation – 0.4 W
- DC Current Gain (hfe) – 130 to 520
- Transition Frequency – 220 MHz
- Noise Figure – 6 dB
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
-
- Multi-turn / Cermet / Industrial / Sealed
- 5 terminal styles
- Tape and reel packaging available
- Chevron seal design
- Mounting hardware available (H-117P)
- RoHS compliant
-
-36%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-36%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
6 MHz Crystal Oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-29%
- USB connectors are made with silver flashed brass contacts.
- Ideal for making your own USB cables.
- Fit for electronics power port repair or DIY projects power supply port.
- Soldering is required.
-
-34%
- L14G3
- PHOTO TRANSISTOR
- PACKAGE/CASE:3-TO-18
- LEADED PROCESS COMPATIBLE: NO
- PEAK REFLOW COMPATIBLE (260 C): NO
- CURRENT RATING:2MA
- MOUNTING TYPE: THROUGH HOL
-
-28%
- High forward surge current capability
- Ideal for printed circuit board
- High-temperature soldering guaranteed:
- 260°C/10 seconds, 0.375″ (9.5mm) lead length,
- 5 lbs (2.3kg) tension
- This series is UL recognized under component index, File number E194718
- RoHS Compliant
-
-18%
Out Of StockR305 fingerprint sensor
Original price was: ₨2,930.00.₨2,399.00Current price is: ₨2,399.00. Quick View- Peak Current: 150mA
- Matching Mode: 1:1 and 1:N
- Baud rate (9600*N)bps, N=1-12 (default N=6 57600bps)
- Character file size: 256 bytes
- Image acquiring time: <0.5s
- Template size: 512 bytes
- Storage capacity: 120
- Security level: 5 (1, 2, 3, 4, 5(highest))
- FAR: <0.001%
- FRR: <0.1%
- Average searching time: < 0.8s (1:880)
- Storage environment Temp: -40℃- +85℃
- RH: 40%-85% RH: <85%
-
-19%
Out Of Stock7.4V 800mAh Li-Ion Battery
Original price was: ₨3,200.00.₨2,599.00Current price is: ₨2,599.00. Quick ViewThis is the lowest cost of Lithium Polymer (LiPo) rechargeable battery that we have ever carried, so that it is affordable for students to use in their projects instead of using the disposable 9V battery that cannot be recharged. It is suitable for low power consumption usage such as circuit board, sensors and micro size DC motors.
-
-4%
Out Of StockThis is the lowest cost of Lithium Polymer (LiPo) rechargeable battery that we have ever carried, so that it is affordable for students to use in their projects instead of using the disposable 9V battery that cannot be recharged. It is suitable for low power consumption usage such as circuit board, sensors and micro size DC motors.
-
Out Of Stock12v charging aluminium framed monocrystalline waterproof solar panel with an output of 8 Watts, ideal for use with caravans, boats, cars etc, supplied diode protected with approx 5 metres of barely ended cabling, these weigh approx 1.1kg and their dimensions are 300mm x 300mm x18mm, suitable for all 12v charging requirements.
-
-52%
Out Of Stock2.4 TFT LCD Shield For Arduino UNO R3 (ILI9340)
Original price was: ₨2,500.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThe 2.4 inch TFT touch Screen LCD Module For Arduino is a beautiful large touchscreen display shield with built in microSD card connection. The LCD has excellent vivid color contrast. This TFT display is big (2.4 diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades). 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. This display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
-
Out Of StockThis is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.
-
-39%
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
Original price was: ₨1,099.00.₨669.00Current price is: ₨669.00. Quick View- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
-
-4%
Out Of Stock- Model: YS-S401
- Working Voltage: DC 5V~24V
- Maximum Working Current: 15mA @ 5V DC
- Flow Rate Range: 0.3~6L/min
- Connection: 6mm (external diameter)
- Inlet Water Pipe Diameter: 2.5-4mm
- Load Capacity: 10mA (DC 5V)
- Operating Temperature: 80
- Liquid Temperature: 120
- Operating Humidity: 35%-90%RH
- Water Pressure: 2.0MPa
- Storage Temperature: -25 to + 80
- Storage Humidity: 25%-95%RH
-
-25%
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40C to 85C.
- Turn on and Turn off time is 2 sec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.