Shop

Default sorting
Show
48
  • Out Of Stock

    AVR C51 Development Board

    AVR/Atmel
    (0)
    ₨950.00 Quick View

    Support for 51 series microcontroller STC89C52, STC12C5A60S2, AT89C51, AT89C52, AT89S51, AT89S52 most commonly used. In addition, to support the other 40 feet of the 51 series microcontroller and the ATmega16! STC89C52, STC12C5A60S2 can serial direct download program for, AT89S series microcontroller needs need specialized programming download program with USBISP a download manager program, AT89C series microcontroller. The ATmega16 use need to use an adapter plate, the download program needs USBISP Downloader!

  • Out Of Stock

    Teensy 3.1

    Development Boards
    (0)
    ₨3,600.00 Quick View

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.

    The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

  • -10%

    STM Discovery Kit STM32F3 STM32F303VC

    Development Boards
    (0)
    Original price was: ₨10,000.00.Current price is: ₨8,999.00. Quick View
    • STM32F303VCT6 microcontroller featuring 256 KB Flash, and 48 KB RAM in an LQFP100 package
    • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
    • Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
    • External application power supply: 3 V and 5 V
    • L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
    • LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
    • Ten LEDs:
      • LD1 (red) for 3.3 V power on
      • LD2 (red/green) for USB communication
      • Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
    • Two pushbuttons (user and reset)
    • USB USER with Mini-B connector
    • Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
  • Out Of Stock

    STM32L152C-DISCO, STM32L Discovery Kit

    Development Boards
    (0)
    ₨2,800.00 Quick View

    32L152CDISCOVERY, Discovery kit for STM32L151/152 line – with STM32L152RC MCU

  • Out Of Stock

    EVK407I, STM32F4 Development Board

    Development Boards
    (0)
    ₨7,250.00 Quick View

    STM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART

  • -11%
    Out Of Stock

    Core429I, STM32F4 Core Board

    Development Boards
    (0)
    Original price was: ₨18,000.00.Current price is: ₨15,999.00. Quick View

    STM32 STM32F429IGT6 MCU core board, full IO expander, JTAG/SWD debug interface

  • -18%
    Out Of Stock

    STM32F746G-DISCO

    Development Boards
    (0)
    Original price was: ₨20,000.00.Current price is: ₨16,500.00. Quick View

    32F746GDISCOVERY, Discovery kit with STM32F746NG MCU

  • Out Of Stock

    Wifi Night Vision IP Camera (ICAM-608)

    Camera/Vision
    (0)
    ₨6,000.00 Quick View

    Features:

    1. 12pcs LED, IR distance 10M. Lens 3.6 mm wireless security camera with memory card
    2. Support ONVIF 2.0, RTSP protocol
    3. WPS one key setup WiFi, acoustic wave wifi setting
    4. 720P,VGA,QVGA triple stream(NOTE:it just support 640*480 in firefox,goole chorome.It will be 1280*720P in IE BROWSER.)
    5. Two-way audio(Note:Audio is not good), Remote Pan/Tilt rotate
    6. Wi-Fi/802.11/b/g/n,support dynamic IP
    7. Motion detection, email alert, FTP upload
    8. Iphone, 3G phone, IOS and android Smartphone supported(don’t support windows APP)
    9. Multi-language, Firefox, Safari, Google browser
    10. Pan:270 degree, Tilt: 80degree, auto cruise
    11. Support 64GB TF Card
  • Out Of Stock

    Sensor Cable – Electrode Pads

    Heart Rate And Muscle Sensors
    (0)
    ₨1,300.00 Quick View

    This is simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24″ Long.

  • -38%

    Single Lead Heart Rate Monitor ECG – AD8232

    Heart Rate And Muscle Sensors
    (0)
    Original price was: ₨2,750.00.Current price is: ₨1,699.00. Quick View
    1. Operating Voltage – 3.3V
    2. Analog Output
    3. Leads-Off Detection
    4. Shutdown Pin
    5. LED Indicator
    6. 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
  • -46%

    Biomedical Sensor Pad (10 pack)

    Heart Rate And Muscle Sensors
    (0)
    Original price was: ₨1,300.00.Current price is: ₨699.00. Quick View

    This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.

  • -10%
    Out Of Stock

    ACS712 Current Sensor 30A

    Current & Voltage
    (0)
    Original price was: ₨400.00.Current price is: ₨359.00. Quick View

    ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.

  • Out Of Stock

    10 DOF IMU Sensor

    Accelero, Gyro. IMU, Magneto
    (0)
    ₨1,850.00 Quick View

    3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.

    ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.

  • -13%
    Out Of Stock

    Flex Sensor 4.5″

    Flex & Force
    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00. Quick View
    • Thickness: 0.4mm
    • Trigger Force: 20g, triggered (default resistance<200kΩ)
    • Pressure Measuring Range: 20g~6kg
    • Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
    • Initial Resistance: >10MΩ
    • Activation Time: <0.01S
    • Operating Temperature: -40℃~+85℃
    • Lifespan: >1million times
    • Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
    • Response Time: <10ms
    • Drift: <5%, 2.5Kg Force, Static load 24H
  • -31%

    Flex Sensor 2.2 Inch

    Flex & Force
    (0)
    Original price was: ₨3,600.00.Current price is: ₨2,499.00. Quick View
    • Angle Displacement Measurement
    • Bends and Flexes physically with motion device
    • Possible Uses
    • Simple Construction
    • Low Profile
    • Physical Therapy
    • Musical Instruments
    • Computer Peripherals
    • Medical Devices
    • Gaming (Virtual Motion)
    • Robotics
  • -41%

    GY-291 ADXL345 3-Axis Accelerometer Module

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨590.00.Current price is: ₨349.00. Quick View
    • Main Chip: ADXL345
    • Model: GY-291
    • Power Supply: 3-5V
    • Means of Communication: IIC / SPI Communication Protocol
    • Measuring Range: ±2g /±16g
    • Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
    • Accelerometer Normal Operating Current: 450µA
    • Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
    • Sleep Mode Current: 8µA
    • Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
    • User-Programmable Interrupts
    • Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
  • -12%

    Gy-61 Triple Axis Accelerometer Adxl335

    Accelero, Gyro. IMU, Magneto
    (1)
    Original price was: ₨1,990.00.Current price is: ₨1,749.00. Quick View
    1. 3V-6V DC Supply Voltage
    2. Onboard LDO Voltage regulator
    3. Can be interfaced with a 3V3 or 5V Microcontroller.
    4. All necessary components are populated.
    5. Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
    6. Tap/Double Tap Detection
    7. Free-Fall Detection
    8. Analog output
    9. Build in ultra-low noise linear LDO voltage regulator
    10. Built-in onboard filters, which reduce noise from the motor and other high-current electronics
    11. All sensors connected to the I2C bus
    12. You can easily select two I2C addresses for MPU6050 by soldered jumper
    13. Power LED
    14. Build in Logic level converter for I2C
    15. Dimensions 20x16mm
    16. Designed for 5V logic level
  • -10%
    Out Of Stock

    GPS Arduino Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨5,350.00.Current price is: ₨4,799.00. Quick View

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -14%

    W5100 Ethernet Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨3,500.00.Current price is: ₨2,999.00. Quick View
    • Operating voltage 5V (supplied from the Arduino Board)
    • Ethernet Controller: W5100 with internal 16K buffer
    • Connection speed: 10/100Mb
    • Connection with Arduino on SPI port
    • The Shield contains a number of informational LEDs
    • PWR: indicates that the board and shield are powered
    • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
    • FULLD: indicates that the network connection is full duplex
    • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
    • RX: flashes when the shield receives data
    • TX: flashes when the shield sends data
    • TX: flashes when the shield sends data
    • COLL: flashes when network collisions are detected
  • Out Of Stock

    Arduino WiFi Shield CC3000

    Arduino & IOT Boards
    (0)
    ₨2,800.00 Quick View
    1. Based on TI CC3000 WIFI module.
    2. Use SPI communication .
    3. Integrated 3.3V regulator .
    4. Level shifter integrated .
    5. Integrated ceramic antenna .
    6. It has a connector for external antenna WIFI
    7. Compatible with Arduino UNO, Mega, Leondardo & Micro
    8. Antenna: Onboard Ceramic
    9. MicroSD card slot onboard
    10. Reset button
    11. Communication Protocol: SPI
    12. Connects via IEEE 802.11 b/g networks
    13. Tx Bandwidth: 11Mbps
    14. Tx Sensitivity: +/-18dBm
    15. Rx sensitivity: -86dBm
    16. IRQ pin for interrupts (useful for asynchronous connections)
    17. Supports WEP, WPA, WPA2, TKIP and AES
    18. TCP and UDP Client & Server Modes available
    19. Max Concurrent TCP/UDP Sockets: 4
    20. TCP/IP stack is built in.