Shop

Default sorting
Show
48
  • -11%
    Quick View

    MQ7 MQ-7 Gas Sensor Detection Module

    (0)
    Original price was: ₨450.00.Current price is: ₨399.00.
    • Product Name: Gas Sensor Module;
    • Model: MQ-7;
    • Type: Analog
    • Detecting Type : Carbonic Oxide(Co);
    • Rated Voltage: DC 5V;
    • Rated Current: 180mA
    • Detecting Range: 100-1000ppm;
    • Pin Quantity: 4;
    • Pin Spacing: 1.8mm/ 0.07″
    • Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
    • Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
  • -10%
    Quick View

    ACS712 Current Sensor 30A

    (0)
    Original price was: ₨400.00.Current price is: ₨359.00.

    ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.

  • -31%
    Quick View

    Dual-axis XY Joystick Module for Arduino

    (0)
    Original price was: ₨230.00.Current price is: ₨159.00.
    • Dimensions: 40 x 27 x 15 (LxWxH) mm
    • Weight: 10gm (without Hat).
    • 2.54mm pin interface leads
    • Operating Voltage: 5V.
    • Long service life and stable performance
    • Standard interface and electronic building blocks
    • Widely use in Arduino DIY projects
    • Cross rocker as a two-way 10K resistor, with the rocker in a different direction
  • Quick View

    10 DOF IMU Sensor

    (0)
    ₨1,850.00

    3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.

    ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.

  • -13%
    Quick View

    Flex Sensor 4.5″

    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00.
    • Thickness: 0.4mm
    • Trigger Force: 20g, triggered (default resistance<200kΩ)
    • Pressure Measuring Range: 20g~6kg
    • Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
    • Initial Resistance: >10MΩ
    • Activation Time: <0.01S
    • Operating Temperature: -40℃~+85℃
    • Lifespan: >1million times
    • Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
    • Response Time: <10ms
    • Drift: <5%, 2.5Kg Force, Static load 24H
  • -25%
    Quick View

    Load Sensor – 50kg

    (0)
    Original price was: ₨600.00.Current price is: ₨449.00.
    • Capacity: 40-50kg
    • Comprehensive Error: 0.05mv/v
    • Output Sensitivity: 1.0 0.1mv/v
    • Nonlinearity: 0.03%FS
    • Repeatability: 0.03%FS
    • Hysteresis: 0.03%FS
    • Creep: 0.03 (3min)%FS
    • Zero Drift: 0.03(1min)%FS
    • Temp. Effect on Zero: 10 1Zero %FS/
    • Temp. Effect on Output: 0.05%FS/10
    • Zero Output: 0.1mV/V
    • Input Resistance: 1000 20
    • Output Resistance: 1000 20
    • Insulation Resistance: 5000M
    • Excitation Voltage: 10V
    • Operation Temp. Range: 0+50
    • Overload Capacity: 150%FS
  • -20%
    Quick View

    DHT11 Humidity & Temperature Sensor

    (0)
    Original price was: ₨350.00.Current price is: ₨280.00.
    • Dimension 28mm*12mm*10mm
    • Main chip DHT11 huminity sensor
    • Voltage: DC 5V
    • Digital output
    • Humidity Range: 2090%RH
    • Humidity accuracy:5%RH
    • Temperature range:0-60
    • Temperature accuracy: 2
  • -46%
    Quick View

    IR Obstacle Avoidance Sensor

    (0)
    Original price was: ₨250.00.Current price is: ₨135.00.
    • There is an obstacle, the green indicator light on the circuit board
    • Detection distance: 2 ~ 30cm
    • Detection angle: 35
    • Comparator chip: LM393
    • 3mm screw holes for easy mounting
  • -17%
    Quick View

    Flex Sensor 2.2 Inch

    (0)
    Original price was: ₨3,600.00.Current price is: ₨2,999.00.
    • Angle Displacement Measurement
    • Bends and Flexes physically with motion device
    • Possible Uses
    • Simple Construction
    • Low Profile
    • Physical Therapy
    • Musical Instruments
    • Computer Peripherals
    • Medical Devices
    • Gaming (Virtual Motion)
    • Robotics
  • -15%
    Quick View

    Force Sensitive Resistor 0.5 INCH FSR

    (0)
    Original price was: ₨1,350.00.Current price is: ₨1,150.00.
    • Detection area (detection range): 14.5 mm circle
    • Physical Diameter: 18.3mm circle
    • The output signal (output signal): Passive variable to hold
    • The Force-sensitive range (range), pressure test: 100g to 10 kg
    • Lifespan (life):> 10 m letter actuation

    Dimensions:

    • Total length: 56mm
    • Overall width: 18.3mm
    • Diameter detection: 14.5mm
    • Thickness: 0.4mm
  • -28%
    Quick View

    MQ135 Air Quality Detector Sensor Module

    (0)
    Original price was: ₨540.00.Current price is: ₨389.00.
    1. Air Quality Sensor Module
    2. Condition: New
    3. Size: 32mm X22mm X27mm
    4. Main chip: MQ-135
    5. Operating Voltage: 5V DC
    6. Type: Analog & Digital
    7. Sensitivity to Ammonia, Sulphide and Benzene steam
    8. Detecting Range: 100-1000ppm
    9. With signal output instructions
    10. TTL output signal is low level
    11. Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
    12. Color is showing pictures.
    13. Sensitive for benzene, alcohol, smoke
    14. Fast response and recovery
    15. Adjustable sensitivity
    16. Signal output indicator
    17. Output voltage boosts along with the concentration of the measured gases increases
  • -41%
    Quick View

    GY-291 ADXL345 3-Axis Accelerometer Module

    (0)
    Original price was: ₨590.00.Current price is: ₨349.00.
    • Main Chip: ADXL345
    • Model: GY-291
    • Power Supply: 3-5V
    • Means of Communication: IIC / SPI Communication Protocol
    • Measuring Range: ±2g /±16g
    • Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
    • Accelerometer Normal Operating Current: 450µA
    • Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
    • Sleep Mode Current: 8µA
    • Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
    • User-Programmable Interrupts
    • Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
  • -20%
    Quick View

    GY-273 Magneto HMC5883L

    (0)
    Original price was: ₨750.00.Current price is: ₨599.00.
    1. Supply Voltage VCC: 3.3 to 6 V
    2. Heading Accuracy: 1 to 2
    3. Magnetic Field Range: -8 to +8 Gauss
    4. I2C Address: 0x1E (7-bit address)
    5. Max Data Rate: 160 Hz
    6. Digital Voltage Level: 3.3V
    7. Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
    8. Weight: 0.95g (0.034oz)
  • -10%
    Quick View

    GPS Arduino Shield

    (0)
    Original price was: ₨5,350.00.Current price is: ₨4,799.00.

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -14%
    Quick View

    W5100 Ethernet Shield

    (0)
    Original price was: ₨3,500.00.Current price is: ₨2,999.00.
    • Operating voltage 5V (supplied from the Arduino Board)
    • Ethernet Controller: W5100 with internal 16K buffer
    • Connection speed: 10/100Mb
    • Connection with Arduino on SPI port
    • The Shield contains a number of informational LEDs
    • PWR: indicates that the board and shield are powered
    • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
    • FULLD: indicates that the network connection is full duplex
    • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
    • RX: flashes when the shield receives data
    • TX: flashes when the shield sends data
    • TX: flashes when the shield sends data
    • COLL: flashes when network collisions are detected
  • Quick View

    Arduino WiFi Shield CC3000

    (0)
    ₨2,800.00
    1. Based on TI CC3000 WIFI module.
    2. Use SPI communication .
    3. Integrated 3.3V regulator .
    4. Level shifter integrated .
    5. Integrated ceramic antenna .
    6. It has a connector for external antenna WIFI
    7. Compatible with Arduino UNO, Mega, Leondardo & Micro
    8. Antenna: Onboard Ceramic
    9. MicroSD card slot onboard
    10. Reset button
    11. Communication Protocol: SPI
    12. Connects via IEEE 802.11 b/g networks
    13. Tx Bandwidth: 11Mbps
    14. Tx Sensitivity: +/-18dBm
    15. Rx sensitivity: -86dBm
    16. IRQ pin for interrupts (useful for asynchronous connections)
    17. Supports WEP, WPA, WPA2, TKIP and AES
    18. TCP and UDP Client & Server Modes available
    19. Max Concurrent TCP/UDP Sockets: 4
    20. TCP/IP stack is built in.