-
SCR C106 C106 Series – SCR TO-255AA 4A
Original price was: ₨75.00.₨59.00Current price is: ₨59.00.- Glassivated Surface for Reliability and Uniformity
- Power Rated at Economical Prices
- Practical Level Triggering and Holding Characteristics
- Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability
- Sensitive Gate Triggering
- Device Marking: Device Type, e.g., C106B, Date Cod
-
IN5819 Diode SCHOTTKY DIODE 1N5819
Original price was: ₨15.00.₨9.00Current price is: ₨9.00.- Schottky Rectifier Diode
- Average forward current is 1A
- Forward Surge Current is 25A
- Forward Voltage Drop 600mV at 1A
- Peak reverse voltage is 40V
- RMS Reverse Voltage is 28V
- Available in DO-41 Package
-
Relay 24V 5 pin
Original price was: ₨85.00.₨69.00Current price is: ₨69.00.- Voltage: 24V
- Amperage: 30/40
- Pack Quantity: 1
- Style: 5-Pin
- Type: S.P.D.T.
-
Relay 6V 5 pin
Original price was: ₨85.00.₨69.00Current price is: ₨69.00.- Model Number: SRD-06VDC-SL-C
- Coil Power : 6V DC
- Pin Out: 5 Pin – Coil – COM – NC – NO
- Nominal Coil Power: 0.36w, 0.45W
- Contact Capacity: 10A 250VAC/10A 125VAC 10A 30VDC/10A 28VDC
- Insulation Resistance: 100M.500VDC
- Operate Time: 15ms/10ms
- Terminal Type: PCB
- Contact Load: High Power
- Product name:: 6V DC Electrical Relay SRD-05VDC-SL-C
- Contact Ratings: 1A,1C
- Contact Resistance: 100m (at 10A 5VDC)
- Contact Material: Silver Alloy
- Size: Miniature
- Protect Feature: Sealed
-
Relay 12V 5Pin
Original price was: ₨85.00.₨69.00Current price is: ₨69.00.- Model Number: SRD-12VDC-SL-C
- Coil Power : 12V DC
- Pin Out: 5 Pin – Coil – COM – NC – NO
- Nominal Coil Power: 0.36w, 0.45W
- Contact Capacity: 10A 250VAC/10A 125VAC 10A 30VDC/10A 28VDC
- Insulation Resistance: 100M.500VDC
- Operate Time: 15ms/10ms
- Terminal Type: PCB
- Contact Load: High Power
- Product name:: 12V DC Electrical Relay SRD-05VDC-SL-C
- Contact Ratings: 1A,1C
- Contact Resistance: 100m (at 10A 5VDC)
- Contact Material: Silver Alloy
- Size: Miniature
- Protect Feature: Sealed
-
UNI-T Multimeter Probes
Original price was: ₨300.00.₨289.00Current price is: ₨289.00.- Universal multimeter accessory test lead kit
- Multimeter test lead kits include 2 module test probes, 2 group long insulated test cable, excellent anti-interference function
- Test lead kit adopted with standard diameter plug, suitable for universal measurement
- Color: Red with Black as shown in the picture
-
15G Solid Rosin Welding Soldering Flux Paste
Original price was: ₨40.00.₨28.00Current price is: ₨28.00.- Melting point: 125 C
- Neutral PH 7>0.3
- Features:
- .High Quality
- .Fluxing excellent results, joint high intensity
- .Good insulation
- .No corrosion,IC and for no corrosive
- .Smooth welding surface
-
Battery Meter Checker Tester -7 Cell Capacity
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00.Digital Battery Capacity Checker Cellmeter 7
Compatible device: NiCd, NiMH, LiPo, LiFe, Li-ion
Use for LiPo LiFe Li-ion NiMH Nicd battery
Applies to check the batteries
2.1″ screen display
Battery Type: NiCd /NIMH, Li-Po, LiFe, Li-Ion
Cell number: NiCd/NIMH(4-7 Cells),Lithium type(2-7 Cells)
Display Mode: Battery cell voltages, total voltages, lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%) -
Digital Thermometer with Probe
Original price was: ₨250.00.₨220.00Current price is: ₨220.00.- Range: -40°C to 200°C
- Measurements taken every 1 second
- Protective case with fastening clip
- Accuracy: +/-0.8°C at 0 to 100°C
- Accuracy: +/-1.0°C at -20 to 0°C
- Accuracy: +/-1.5°C at -40 to -20°C or 100 to 200°C
- Resolution: 0.1°C
- Measure Units: °C or °F
- Probe length: 125mm
- Stainless steel penetration probe.
- HACCP Compliant
- EN 13485 Compliant
- Auto switching-off after 5 minutes
- Dimensions: 150 × 20 × 16mm
-
Motor + Wheel DC Geared 5V
Original price was: ₨400.00.₨299.00Current price is: ₨299.00.- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
-
3.5 inch TFT Touch Screen for Arduino Mega
Original price was: ₨1,500.00.₨1,450.00Current price is: ₨1,450.00.Features:
Name
Parameter
Display Color
RGB 65K color
Screen Size
3.5(inch)
Type
TFT
Driver IC
ILI9488
Resolution
480*320 (Pixel)
Module Interface
4 Wire SPI Interface
Active Area (AA area)
48.96×73.44(mm)
Module PCB Size
56.34×98(mm)
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
VCC power voltage
3.3V~5V
Logic IO port voltage
3.3V(TTL)
Rough Weight(Package containing)
With touch: 57 (g)
-
LiPo 11.1v 3000mAH 25C – BlackMagic
₨3,500.00Features:
For DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time
Suitable for CX-20, Quanum Nova Quadcopter
Special for DJI PHANTOM 1 and FC40 Quadcopter,improve about 30% flight time than original battery
Well-designed,have a special handle for take out the battery easily -
LiPo 11.1v 2700mAH 25C – BlackMagic
₨3,300.00Features:
Black Magic 2700mAh 11.1V 25C LiPo Battery for DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time, enjoy more flight fun!
-
LiPo 11.1v 2650mAH 1C – Turnigy
₨1,500.00Features:
The Turnigy 2650mAh Transmitter pack fits snuggly into any Futaba or Jr radio which uses a 4×4 AA cell battery configuration
-
LiPo 11.1v 1500mAH 35C – ZOP Power
₨1,850.00Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high temperature condition.
- Don’t throw it into fire.
- Don’t throw it into water.
-
LiPo 14.8v 4S 5200mAH 30 LionPower
₨6,000.00-
Capable of maximum continuous discharge rates up to 30C, burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there’s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models
-
-
LiPo 11.1v 2200mAH 25C – TCB
₨2,300.00TCB 2200mAh 11.1V 25C 3S Lipo Battery XT60 Plug For RC Models
-
LiPo 11.1v 6000mAH 50 – HRB
₨6,500.00Features:
Capable of maximum continuous discharge rates up to 50C,burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there?s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
-
LiPo 11.1v 3300mAH 35C – HRB
₨3,700.003S 11.1V 3300mah 35C?Lipo Battery with hardcase?For 1/10th RC Car Boat ?.
-
LiPo 11.1v 3500mAH 25C TCB
₨3,500.00Capable of maximum continuous discharge rates up to 25C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance.
-
LiPo 11.1V 2200mAH 25C LionPower
₨2,000.00Oriainal Lion Power Lipo Battery 11.1V 2200Mah 25C MAX 40C T Plug for RC Car Airplane Align Trex 450 Helicopter Part
-
T-Plug T Connector Male/Female pair 50A
Original price was: ₨120.00.₨99.00Current price is: ₨99.00.dean connector for quadcopter, tamiya connector, battery connector, deans connectors bulk, soldering deans, soldering rc battery connectors, how to change connectors on lipo battery,deans plugs rc, how to solder deans connectors to a lipo battery.
T connectors sold as matching male-female pairs and have a current rating of 50 A.
They are the smallest high-current connectors we know of, and they are great for projects that involve bigger motors and controllers. Often used to connect batteries in radio control models.
-
CONNECTOR 4MM
Original price was: ₨95.00.₨89.00Current price is: ₨89.00.- High quality 4mm Gold Bullet Connectors
- 1 Pair (1 – Female & 1 – Male)
- Great for motor and esc controller connections
- Must solder
-
Bullet Connector For ESC Motor Male Female
Original price was: ₨70.00.₨59.00Current price is: ₨59.00.Bullet Connector for ESC is a pack of 1 Male and 1 Female 3.5mm bullet connectors. The connectors are high temperature, voltage and current rating and useful for connecting ESCs to Brushless motor or batteries. You may need to solder wires to attach them securely and add a heat shrink over it for short circuit protection as these connectors do not have any sleeves over them.
-
3.5″ IPS TFT LCD for Arduino MEGA2560
Original price was: ₨5,000.00.₨3,899.00Current price is: ₨3,899.00.- Screen size 3.5″ – 480 X 320 Pixels
- Support Arduino Mega2560 directly
- Control IC: ILI9846
- Compatible with 3.3/5V operation voltage level
- Full-angle IPS TFT panel
- With SD card Socket
- Interface: 16 Bit parallel interface
-
TowerPro MG995 Plastic Gear Servo Motor
Original price was: ₨950.00.₨899.00Current price is: ₨899.00.MG995 MG-995 Metal Gear Servo Motor Tower Pro-360 Degree comes complete with 30cm wire and 3 pins S type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. This high-speed standard servo can rotate approximately 360 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so its great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.
-
Force Sensitive Resistor – Small
Original price was: ₨1,899.00.₨1,299.00Current price is: ₨1,299.00.This is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.
Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.
These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.
-
JST 3 Holes Female Connector
Original price was: ₨25.00.₨19.00Current price is: ₨19.00.INTRODUCTION
This product includes 3-pin 2.0mm(0.08″) mating connector housing(10 units) and crimp pins (30 units).They work with wires ranging from 28 to 26 AWG. -
XBee Pro 60mW Wire Antenna
₨6,799.00INTRODUCTION
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. -
XBee 2mW Wire Antenna – Series 2 (ZB)
Original price was: ₨15,000.00.₨8,799.00Current price is: ₨8,799.00.This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
-
SCT-013-000 Non-invasive AC Current Clamp Sensor 20A
Original price was: ₨1,500.00.₨1,250.00Current price is: ₨1,250.00.AC Current Signal Conversion Module
- Input Voltage (VCC): 3.3V-5.5V
- Interface: Gravity Analog (PH2.0-3P,analog voltage output 0.2-2.8V DC)
- AC Voltage Input Range: 0-1V (AC RMS)
- Relative Error: +/- 4%
- Dimension: 32×27 mm
- Weight: 5g
Open Type AC Transformer Probe
- AC Current Range: 0-20A
- Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
- Accuracy: ±1%
- Non-linearity: ≤±0.2%
- Frequency Range: 50Hz~1kHz
- Cable Length: 1m
- Working Temperature: -25 ℃~+70 ℃
- Opening Size: 13×13 mm / 0.51×0.51 in
- Weight: 50g
-
Gravity: 80cm Arduino Infrared Proximity Sensor
₨890.00INTRODUCTION
This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.
Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.
-
XBee 1mW Wire Antenna
Original price was: ₨6,500.00.₨4,549.00Current price is: ₨4,549.00.INTRODUCTION
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek! -
Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm
₨3,000.00This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearboxs output shaft.These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.This motor is an ideal option for your mobile robot project.Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole. -
12V DC Motor 350RPM w/Encoder (12kg*cm)
₨3,000.00This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
-
Digispark – The tiny, Arduino usb dev board
Original price was: ₨620.00.₨449.00Current price is: ₨449.00.The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
-
Telemetry 3DR TTL
₨3,800.00The Radio telemetry system base on 3DR Radio system and 100% compatible.
It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. Its available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).
The system provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.
Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.
-
Xbee shield V03
Original price was: ₨5,000.00.₨3,999.00Current price is: ₨3,999.00.This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. -
ZigBee XCore2530 1500M
₨1,950.00ZigBee module, features the CC2530F256 onboard, farther communication distance with PA
Overview
XCore2530 is a ZigBee module based on CC2530F256.
Basically this module can be used in two aspects :
- Develop application with the provided firmware
Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification - Develop your own firmware
In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
- Develop application with the provided firmware
-
EasyVR Shield 3.0 – Voice Recognition Shield
Original price was: ₨10,000.00.₨9,799.00Current price is: ₨9,799.00.Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.
EasyVR 2.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost-effective speech and voice recognition capabilities to virtually any application. EasyVR is the third-generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 2.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.
-
RF 315/433 Transmitter/Receiver Module
Original price was: ₨350.00.₨299.00Current price is: ₨299.00.Transmitter :
- Working voltage: 3V – 12V for max. power use 12V
- Working current: max Less than 40mA max, and min 9mA
- Resonance mode: (SAW)
- Modulation mode: ASK
- Working frequency: Eve 315MHz Or 433MHz
- Transmission power: 25mW (315MHz at 12V)
- Frequency error: +150kHz (max)
- Velocity: less than 10Kbps
So this module will transmit up to 90m in open area.
Receiver :
- Working voltage: 5.0VDC +0.5V
- Working current: 5.5mA max
- Working method: OOK/ASK
- Working frequency: 315MHz-433.92MHz
- Bandwidth: 2MHz
- Sensitivity: excel 100dBm (50)
- Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)
-
NRF24L01 2.4GHz Wireless Transceiver Module
Original price was: ₨650.00.₨249.00Current price is: ₨249.00.- Worldwide 2.4GHz ISM band operation Free license to use.
- 126 RF channels.
- High air data rate: 250kbps, 1 and 2Mbps.
- Transmitter: 11.3mA at 0dBm output power.
- Receiver: Fast AGC for improved dynamic range.
- Receiver: Integrated channel filters.
- Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
- Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
- Low Power Management:1.9 to 3.6V supply range.
- GFSK modulation.
- Auto packet transaction handling.
- Easy to design.
- Small size:15mm*29mm.
-
5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
Original price was: ₨900.00.₨799.00Current price is: ₨799.00.- Imported high-quality double-sided compact PCB.
- Opto-isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
-
Infrared Proximity Sensor – GP2Y0A02YK0F Sharp Long Range
₨1,250.00Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!
-
Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range
₨2,200.00Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5 to 12 (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.
-
Infrared Proximity Sensor – GP2Y0A21Y Sharp Mid Range
₨2,450.00Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
-
6Legs Robotic Kit
₨4,500.00This Robot is made of 18 SG90 Servo Motors
To make this robot move, we just need the control software and the following components:
1.6 Legs 18 DOF Robot Black Spider Robot 18pcs SG90 Servo Motor
2.32 Channels Servo Motor Controller Robot Contorller Servo Driver
3.7.4V power supply -
XBee Pro 60mW PCB Antenna – Series 1
Original price was: ₨7,500.00.₨5,999.00Current price is: ₨5,999.00.This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.











































































