-
-23%
A2212 1000KV Brushless DC Motor
Original price was: ₨1,500.00.₨1,150.00Current price is: ₨1,150.00. Quick View- Model: A2212 10T
- Motor KV (RPM/V): 1400
- Maximum Efficiency: 80%
- Current Capacity: 16A Per 60S
- No-Load Current(A): 0.7A @10V
- Max. Efficiency Current: 6-12A
- Maximum Watts(W): 180
- Internal Resistance(mΩ): 65
- Poles: 14
- Shaft Diameter (mm): 3.17
- LiPO Batteries: 2S-3S
- Length (mm): 27.5
- Width (mm): 26.5
- Weight (gm): 62
-
-20%
A2212 2200KV Brushless DC Motor BLDC
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick View- Recommended Voltage: 2-12VDC
- Internal Resistance: 90mΩ
- Shaft Size: 3.17mm (1.8″)
- Shaft Length: 11mm
- Motor Diameter: 27.5mm
- Motor Length (Overall): 40mm
- Current Capacity: 12A/60s
- Max Efficiency: 80%
- Max Power: 239W
- Recommended ESC: Minimum Of 18A
- Recommended Model Weight: 300-1000g
- Mounting Holes: M3
- Wire Length: ~70mm
-
-10%
A3967 Stepper Motor Driver Module
Original price was: ₨400.00.₨360.00Current price is: ₨360.00. Quick ViewThis EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.
-
-23%
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
-
AA 2Cell holder especially design for student science project kit and many more application in 3 volt supply.
-
AA 4 Cell Battery Holder Need 6V 1.5V cell or 4.8V with 1.2V cell to run a project on AA batteries This is a simple battery holder that we use in some of our kits. What we like about these are the leads that come pre-attached, ready to be soldered to a PCB, or attached with your choice of connector.
- Two mounting holes to accept flush head screws.
- You can also use high adhesive double-sided tape, or a glue gun to attach to your project or prototype.
- This battery holder has two wires 6 inches of 24-gauge leads that have 5 mm of insulation stripped off of the ends.
-
-45%
ABS Enclosure Black Case for Raspberry Pi with Heat Sink And 5v Fan
Original price was: ₨2,000.00.₨1,099.00Current price is: ₨1,099.00. Quick ViewThis Raspberry case is made of ABS material. It can be perfectly compatible with Raspberry Pi 4B. Considering the high power consumption cost of Raspberry Pi 4B, the Raspberry case has room to add a fan (35x35x10mm) and general copper/aluminum heatsink (up to 6mm) for heat dissipation. What’s more The case supports the GPIO PINs of the Raspberry Pi 4B and connects external devices like Raspberry Pi Hat outside the case by cables. Also, the ventilation openings are designed on the top and bottom of the case to keep cooling.
-
-12%
AC 220V 100W Aluminum PTC Heater Thermostat Plate
Original price was: ₨1,700.00.₨1,499.00Current price is: ₨1,499.00. Quick ViewItems details AC 220V 100W Aluminum PTC Heater Thermostat Heating Plate constant temperature basic parameter: PTC heater size: 67*70*6mm AC 220 volts 100 watts,250-260 degree Celsius automatic constant temperature.
-
-29%
AC 220V Temperature Controller RKC REX-C700
Original price was: ₨3,500.00.₨2,499.00Current price is: ₨2,499.00. Quick View- Type: Digital
- Theory: Temperature Controller
- Usage: Industrial
- Model Number: REX-C700 Power
- Type: Charger Display
- Size:1.9 Inches & Under Max
- Measuring Temperature:120°C & Above
- Style: Standing Station
- Size:72*72mm
- Input: Universal Control
- output: Relay Alarm
- Display: Celsius °C Unit
- Type: piece
- Package Weight: 0.4kg (0.88lb.)
-
-40%
AC/DC 60W Ceiling Fan Circuit Kit | Solar & BLDC Fan Controller
Original price was: ₨2,500.00.₨1,499.00Current price is: ₨1,499.00. Quick View -
-32%
Acrylic Rectangle 0.56 Inch 3 Digit 7 Segment Display
Original price was: ₨130.00.₨89.00Current price is: ₨89.00. Quick View- Operating current: 10mA
- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Low Current Consumption
- High Brightness
- Blackface and RED LED segments
-
-6%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -20A~ 20A
- Sensitivity: 100mV/A
- The current sensor chips: ACS712_ELC-20A.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
- The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
-
-10%
Out Of StockACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
-
-7%
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
-
-36%
Activity High Quality 50g or 100g Soldering Wire for Soldering Works
Price range: ₨359.00 through ₨729.00 Quick View- Diameter: 0.031″ (0.8mm)
- Weight: 0.11lbs (50g) or (100g)
- Composition: 70% Tin, 30% Lead
- Rosin Flux Content: 2%
-
-40%
Out Of StockAD112-50FM Digital Multifunction Power Meter – LCD Display | AC Voltage, Current, Power, Frequency & Energy Monitor
Original price was: ₨4,992.00.₨2,999.00Current price is: ₨2,999.00. Quick View- Voltage Range: AC 80.0-300.0V
- Current Range: AC 0-99.99A (0.01A resolution)
- Power Factor: 0.00-1.00PF
- Active Power Range: 0-45,000W
- Energy Measurement: 0-99,999kWh
- Operating Temperature: -25°C to 85°C
- Dimensions: 79 x 43 x 48mm
-
-19%
Out Of StockThe AD7528 is a monolithic dual 8-bit digital/analog converter featuring excellent DAC-to-DAC matching. It is available in skinny 0.3″ wide 20-lead DIPs and in 20-lead surface mount packages. Separate on-chip latches are provided for each DAC to allow easy microprocessor interface.
-
-10%
Out Of StockAdjustable Soldering Iron 80W 220V/110V LCD Digital Display
Original price was: ₨2,000.00.₨1,799.00Current price is: ₨1,799.00. Quick View -
-32%
ADS1115 Analog-to-Digital Converter
Original price was: ₨1,100.00.₨749.00Current price is: ₨749.00. Quick View- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
-
-20%
Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.
-
-33%
AMTECH RMA223 RMA-223 RMA559 Solder Paste Flux 10CC
Original price was: ₨299.00.₨199.00Current price is: ₨199.00. Quick View- Flux Type: Original AMTECH RMA-223 UV (Made in USA)
- Volume: 10ml/10cc
- Dimension: 93 x 33 x 23mm
- Material: the mixture of high-quality alloyed powder and resinic pasty flux, it can avoid the pale yellow residue.
- Color: Colorless/Transparent
- Insulated: Yes
- With Needle Tip: Yes
- Made in: USA
- Application: for soldering and reballing of computer and phone chips.
- Advantage: Good immersion and high-intensity joint.
- Function: for PCB, BGA, and PGA reworking.
- 100%: New Type, high quality.
-
-20%
Out Of StockThis analog multimeter has a capability of measuring DC voltages having four range setting, DC current having three range setting, AC voltages having four range setting and resistance having three range setting.
-
-14%
Out Of StockAnalog Servo HD 1501mg
Original price was: ₨5,800.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewIt is a metal geared analog servo which can deliver extra high torque as compared many high power servo motors
-
-26%
Out Of StockAnalog Timer H3BA-8 24VDC Timer Relay
Original price was: ₨2,550.00.₨1,899.00Current price is: ₨1,899.00. Quick View -
-23%
Analog Timer Relay H3BA-8 12V
Original price was: ₨1,550.00.₨1,199.00Current price is: ₨1,199.00. Quick View- Model: H3BA-8
- Brand: Omron
- Output: DPDT
- Usage/Application: INDUSTRIAL
- Rated Current: 5A 12VAC
- Mounting Type: Panel Mounting Timer
- Display Type: Analog
- Automation Grade: Semi-Automatic
-
-23%
Analog Timer Relay H3BA-8 220V
Original price was: ₨1,500.00.₨1,149.00Current price is: ₨1,149.00. Quick View- Model: H3BA-8
- Brand: Omron
- Output: DPDT
- Usage/Application: INDUSTRIAL
- Rated Current: 5A 220VAC
- Mounting Type: Panel Mounting Timer
- Display Type: Analog
- Automation Grade: Semi-Automatic
-
-40%
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
-11%
- Charge your smartphone with this Micro USB cable
- Enjoy smooth data transfers to/from computer, laptops
- 1.5 Meter length cable
- Lasts upto 10X longer than conventional cable.
- Safe & Smart
- Durable Product
-
Android charging cable for smart phones.
-
-27%
ANENG ST212 Digital DC/AC Clamp Meter Current 400A Amp Multimeter Large Color Screen
Original price was: ₨11,000.00.₨7,999.00Current price is: ₨7,999.00. Quick View- AC Current Range: 60A/400A
- DC Current Range: 60A/400A
- DC Voltage Range: 600V/600mV
- AC Voltage Range: 600V/600mV
- Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/60mF
- Temperature: -40~1000℃, -40~1832℉
- Frequency: 60Hz/1000Hz
- Colour: Red
- Material: ABS
- Display: LCD
- Max. Display Value: 6000 digit
- Sampling Time: About 3 times/second, bargraph 10 times/second
- Auto-off: 15 minutes
- Operating Temperature: 18~28℃
- Storage Temperature: -10~50℃
- Operating Height: Max. 2000m
- Power Supply: 2 * 1.5V AAA battery (NOT included)
- Item Size: 182 * 62.1 * 33.4mm / 7.17 * 2.44 * 1.31in
- Item Weight: 150g / 5.29oz
- Package Weight: 272g / 9.59oz
- Package Size: 21.7 * 8.5 * 4.5cm / 8.54 * 3.35 * 1.77in
-
-25%
APDS9960 proximity and light intensity sensor I2C 3.3V
Original price was: ₨799.00.₨599.00Current price is: ₨599.00. Quick View- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
-
-15%
Out Of StockThe power module has the ability to provide APM lossless power from a LiPo battery as well as current consumption and voltage measurements through 6-pos cable. The on board regulator switch has the ability of giving outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.
-
Out Of StockThe ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.
This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
-
-21%
Out Of StockAPM2.8 ArduPilot Mega 2.8 Flight Control Board
Original price was: ₨19,000.00.₨15,000.00Current price is: ₨15,000.00. Quick ViewThis is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.
-
-24%
Arduino 28BYJ48 Stepper Motor
Original price was: ₨458.00.₨349.00Current price is: ₨349.00. Quick ViewArduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:
-
-7%
Out Of Stock -
Out Of Stock- It is well designed to be durable during handling and repeated connections.
- Cable transfer speed is up to 480Mbps.
- USB Type: 2.0
- Data transfer rate: up to 480Mbps
- Connectors: USB type A tata-USB type B tata
- Length: 1.3 m
- Color: BLUE
-
-20%
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
-
-28%
Arduino Due AT91SAM3X8E ARM Cortex-M3 Board
Original price was: ₨6,240.00.₨4,500.00Current price is: ₨4,500.00. Quick View- MicrocontrollerAT91SAM3X8E
- Operating Voltage3.3V
- Input Voltage (recommended)7-12V
- Input Voltage (limits)6-16V
- Digital I/O Pins54 (of which 12 provide PWM output)
- Analog Input Pins12
- Analog Output Pins2 (DAC)
- Total DC Output Current on all I/O lines130 mA
- DC Current for 3.3V Pin800 mA
- DC Current for 5V Pin800 mA
- Flash Memory512 KB is all available for the user applications
- SRAM96 KB (two banks: 64KB and 32KB)Clock Speed84 MHz
- Length101.52 mm
- Width53.3 mm
- Weight36 g
-
-42%
Arduino Jumper Wire F/F 40Pcs
Original price was: ₨300.00.₨175.00Current price is: ₨175.00. Quick View- 40 pieces of the 10cm female to female color Dupont jumper wires cables in one set will be sold together.
- Color: as shown in the pictures.
- Material: durable hard plastic and copper wire.
- Each cable length: about 10cm /3.94 .
- Connectors: 1pin-1pin female to female header.
- 100% brand new and high quality 2.54mm Female to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
- Compatible with 2.54mm spacing pin headers.
- A popular choice for the construction or repair.
- Can be used for electronic project and Genuine Arduino products.
- Easy to install and use, durable and reusable to use.
-
Arduino jumper wire, male to male connector.
-
-40%
Arduino Jumper Wire M/F 40Pcs
Original price was: ₨300.00.₨179.00Current price is: ₨179.00. Quick View- Color: Multicolor.
- Material: durable hard plastic andcopper wire.
- Each cable length: about 10cm /3.94/.
- Connectors: 1pin-1pin male to female header.
- 100% brand new and high quality 2.54mm Male to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
- Compatible with 2.54mm spacing pin headers.
- A popular choice for the construction or repair.
- Can be used for electronic project and Genuine Arduino products.
- Easy to install and use, durable and reusable to use.
-
Arduino jumper wire, male to male connector.
-
-38%
Arduino Jumper Wire M/M 40Pcs
Original price was: ₨300.00.₨185.00Current price is: ₨185.00. Quick View- Compatible with 2.54 mm spacing pin headers.
- 120 pcs chromatic color jump wire.
- High quality and in good working condition.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Be used for the electronic project and Genuine Arduino product.
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
-
-9%
he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
-
Hot-33%
Arduino MEGA 2560 PRO Mini
Original price was: ₨4,500.00.₨2,999.00Current price is: ₨2,999.00. Quick View- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature 40C/+85C
- Length x Width:38mmx54mm
-
Hot-8%
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board
Original price was: ₨4,000.00.₨3,699.00Current price is: ₨3,699.00. Quick View- Arduino Mega 2560 rev3 ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
-
Hot-42%
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board With Logo
Original price was: ₨6,000.00.₨3,499.00Current price is: ₨3,499.00. Quick View- Arduino Mega 2560 rev3 ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed