Shop

  • You've just added this product to the cart:

    Wifi Night Vision IP Camera (ICAM-608)

    Wifi Night Vision IP Camera (ICAM-608)
    0 out of 5

    Wifi Night Vision IP Camera (ICAM-608)

    Features:

     

    1. 12pcs LED, IR distance 10M. Lens 3.6 mm wireless security camera with memory card
    2. Support ONVIF 2.0, RTSP protocol
    3.  WPS one key setup WiFi, acoustic wave wifi setting
    4. 720P,VGA,QVGA triple stream(NOTE:it just support 640*480 in firefox,goole chorome.It will be 1280*720P in IE BROWSER.)
    5. Two-way audio(Note:Audio is not good), Remote Pan/Tilt rotate
    6. Wi-Fi/802.11/b/g/n,support dynamic IP
    7. Motion detection, email alert, FTP upload
    8. Iphone, 3G phone, IOS and android Smartphone supported(don’t support windows APP)
    9. Multi-language, Firefox, Safari, Google browser
    10. Pan:270 degree, Tilt: 80degree, auto cruise
    11. Support 64GB TF Card
    6,000.00
  • You've just added this product to the cart:

    WIFI-LPB100-B Eval Kit

    WIFI-LPB100-B Eval Kit
    0 out of 5

    WIFI-LPB100-B Eval Kit

    WIFI-LPB100-B Eval Kit is a WiFi module evaluation kit designed for the WiFi module WIFI-LPB100-B.

    2,000.00
  • You've just added this product to the cart:

    WIFI-LPT100 Eval Kit

    WIFI-LPT100 Eval Kit
    0 out of 5

    WIFI-LPT100 Eval Kit

    WIFI-LPT100 Eval Kit is a WiFi module evaluation kit consists of the WiFi module WIFI-LPT100, and the mother board WIFI400.

    2,050.00
  • You've just added this product to the cart:

    WIFI232 Eval Kit

    WIFI232 Eval Kit
    0 out of 5

    WIFI232 Eval Kit

    WIFI232 Eval Kit is a WiFi to UART Evaluation Kit, including a convertor module WIFI232-B, and a mother board WIFI501 for testing/evaluating.

    3,000.00
  • You've just added this product to the cart:

    XBee 1mW Wire Antenna

    XBee 1mW Wire Antenna
    0 out of 5

    XBee 1mW Wire Antenna

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!

    2,900.00
  • You've just added this product to the cart:

    XBee 1mW Wire Antenna

    XBee 1mW Wire Antenna
    0 out of 5

    XBee 1mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
    3,000.00
  • 0 out of 5

    XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)

    This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
    This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.

    3,400.00
  • You've just added this product to the cart:

    XBee 2mW Wire Antenna - Series 2 (ZB)

    XBee 2mW Wire Antenna - Series 2 (ZB)
    0 out of 5

    XBee 2mW Wire Antenna – Series 2 (ZB)

    INTRODUCTION

    This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

    3,800.00
  • 0 out of 5

    XBee Pro 60mW PCB Antenna – Series 1

    This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

    5,300.00
  • You've just added this product to the cart:

    XBee Pro 60mW Wire Antenna

    XBee Pro 60mW Wire Antenna
    0 out of 5

    XBee Pro 60mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    5,500.00
  • You've just added this product to the cart:

    Xbee Shield

    -36%
    0 out of 5

    Xbee Shield

    It is an Arduino shield which allows aduino to communicate wirelessly with the devices.

    860.00 550.00
  • You've just added this product to the cart:

    Xbee shield V03

    Xbee shield V03
    0 out of 5

    Xbee shield V03

    This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.
    It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
    850.00