• Android charging cable for smart phones.

  • -27%
    Out Of Stock

    ANENG ST212 Digital DC/AC Clamp Meter Current 400A Amp Multimeter Large Color Screen

    (3)
    Original price was: ₨11,000.00.Current price is: ₨7,999.00. Quick View
    1. AC Current Range: 60A/400A
    2. DC Current Range: 60A/400A
    3. DC Voltage Range: 600V/600mV
    4. AC Voltage Range: 600V/600mV
    5. Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
    6. Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/60mF
    7. Temperature: -40~1000℃, -40~1832℉
    8. Frequency: 60Hz/1000Hz
    9. Colour: Red
    10. Material: ABS
    11. Display: LCD
    12. Max. Display Value: 6000 digit
    13. Sampling Time: About 3 times/second, bargraph 10 times/second
    14. Auto-off: 15 minutes
    15. Operating Temperature: 18~28℃
    16. Storage Temperature: -10~50℃
    17. Operating Height: Max. 2000m
    18. Power Supply: 2 * 1.5V AAA battery (NOT included)
    19. Item Size: 182 * 62.1 * 33.4mm / 7.17 * 2.44 * 1.31in
    20. Item Weight: 150g / 5.29oz
    21. Package Weight: 272g / 9.59oz
    22. Package Size: 21.7 * 8.5 * 4.5cm / 8.54 * 3.35 * 1.77in
  • -25%

    APDS9960 proximity and light intensity sensor I2C 3.3V

    (0)
    Original price was: ₨799.00.Current price is: ₨599.00. Quick View
    • Gesture recognition using reflected IR
    • Digital proximity sensing using reflected IR
    • Separate Red/Green/Blue light intensity sensors
    • Ambient (clear) light intensity sensor
    • IR light-blocking filter
    • Interrupt output available
    • I2C interface with good library support
    • 3.3V operation
  • -15%
    Out Of Stock

    APM Power Module

    (0)
    Original price was: ₨1,500.00.Current price is: ₨1,269.00. Quick View

    The power module has the ability to provide APM lossless power from a LiPo battery as well as current consumption and voltage measurements through 6-pos cable. The on board regulator switch has the ability of giving outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.

  • Out Of Stock

    The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

     

    This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.

  • -21%
    Out Of Stock

    APM2.8 ArduPilot Mega 2.8 Flight Control Board

    (0)
    Original price was: ₨19,000.00.Current price is: ₨15,000.00. Quick View

    This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers.

    It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.

  • -35%

    Arduino 28BYJ48 Stepper Motor with driver

    (0)
    Original price was: ₨850.00.Current price is: ₨549.00. Quick View

    Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:

  • -7%
    Out Of Stock

    Arduino Cable Black 1.5m

    (0)
    Original price was: ₨70.00.Current price is: ₨65.00. Quick View
  • Out Of Stock
    • It is well designed to be durable during handling and repeated connections.
    • Cable transfer speed is up to 480Mbps.
    • USB Type: 2.0
    • Data transfer rate: up to 480Mbps
    • Connectors: USB type A tata-USB type B tata
    • Length: 1.3 m
    • Color: BLUE
  • -20%

    ARDUINO CNC SHIELD V3

    (0)
    Original price was: ₨500.00.Current price is: ₨399.00. Quick View
    1. Latest Arduino CNC Shield Version 3.10
    2. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
    3. PWM Spindle and direction pins
    4. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
    5. 2 x End stops for each axis (6 in total)
  • -28%
    Arduino Due AT91SAM3X8E ARM Cortex-M3 Board

    Arduino Due AT91SAM3X8E ARM Cortex-M3 Board

    (0)
    Original price was: ₨6,240.00.Current price is: ₨4,500.00. Quick View
    • MicrocontrollerAT91SAM3X8E
    • Operating Voltage3.3V
    • Input Voltage (recommended)7-12V
    • Input Voltage (limits)6-16V
    • Digital I/O Pins54 (of which 12 provide PWM output)
    • Analog Input Pins12
    • Analog Output Pins2 (DAC)
    • Total DC Output Current on all I/O lines130 mA
    • DC Current for 3.3V Pin800 mA
    • DC Current for 5V Pin800 mA
    • Flash Memory512 KB is all available for the user applications
    • SRAM96 KB (two banks: 64KB and 32KB)Clock Speed84 MHz
    • Length101.52 mm
    • Width53.3 mm
    • Weight36 g
  • Arduino jumper wire, Female to Female connector.

  • -42%

    Arduino Jumper Wire F/F 40Pcs

    (1)
    Original price was: ₨300.00.Current price is: ₨175.00. Quick View
    • 40 pieces of the 10cm female to female color Dupont jumper wires cables in one set will be sold together.
    • Color: as shown in the pictures.
    • Material: durable hard plastic and copper wire.
    • Each cable length: about 10cm /3.94 .
    • Connectors: 1pin-1pin female to female header.
    • 100% brand new and high quality 2.54mm Female to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
    • Compatible with 2.54mm spacing pin headers.
    • A popular choice for the construction or repair.
    • Can be used for electronic project and Genuine Arduino products.
    • Easy to install and use, durable and reusable to use.
  • Arduino jumper wire, male to male connector.

  • -40%

    Arduino Jumper Wire M/F 40Pcs

    (1)
    Original price was: ₨300.00.Current price is: ₨179.00. Quick View
    • Color: Multicolor.
    • Material: durable hard plastic andcopper wire.
    • Each cable length: about 10cm /3.94/.
    • Connectors: 1pin-1pin male to female header.
    • 100% brand new and high quality 2.54mm Male to Female Color Dupont Jumper Wires Cables for Arduino Breadboard.
    • Compatible with 2.54mm spacing pin headers.
    • A popular choice for the construction or repair.
    • Can be used for electronic project and Genuine Arduino products.
    • Easy to install and use, durable and reusable to use.
  • Arduino jumper wire, male to male connector.

  • -38%

    Arduino Jumper Wire M/M 40Pcs

    (1)
    Original price was: ₨300.00.Current price is: ₨185.00. Quick View
    • Compatible with 2.54 mm spacing pin headers.
    • 120 pcs chromatic color jump wire.
    • High quality and in good working condition.
    • Durable and reusable.
    • Easy to install and use.
    • A popular choice for construction or repair.
    • Be used for the electronic project and Genuine Arduino product.
    • Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
  • -9%

    Arduino Leonardo R3

    (1)
    Original price was: ₨1,750.00.Current price is: ₨1,599.00. Quick View

    he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

  • -24%

    Arduino MEGA 2560 PRO Mini

    (1)
    Original price was: ₨4,500.00.Current price is: ₨3,399.00. Quick View
    • Microcontroller ATmega2560
    • USB-TTL converter: CH340
    • Power Out:5V-800mA
    • Power IN.: 5V
    • Power IN. VIN/DC Jack:5V
    • Power Consumption: 5V 220mA
    • Logic Level: 5V
    • USB: Micro USB
    • Clock Frequency: 16MHz
    • Operating Supply Voltage: 5V
    • Digital I/O: 54
    • Analog I/O: 16
    • Memory Size: 256kb
    • Data RAM Type/Size: 8Kb
    • Data ROM Type/Size: 4Kb
    • Interface Type : ISP
    • Operating temperature 40C/+85C
    • Length x Width:38mmx54mm
  • -8%

    Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board

    (2)
    Original price was: ₨4,000.00.Current price is: ₨3,699.00. Quick View
    • Arduino Mega 2560 rev3 ATmega2560 microcontroller
    • Input voltage – 7-12V
    • 54 Digital I/O Pins (14 PWM outputs)
    • 16 Analog Inputs
    • 256k Flash Memory
    • 16Mhz Clock Speed
  • -42%
    Arduino Mega 2560 R3 with ATmega16U2 microcontroller

    Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board With Logo

    (5)
    Original price was: ₨6,000.00.Current price is: ₨3,499.00. Quick View
    • Arduino Mega 2560 rev3 ATmega2560 microcontroller
    • Input voltage – 7-12V
    • 54 Digital I/O Pins (14 PWM outputs)
    • 16 Analog Inputs
    • 256k Flash Memory
    • 16Mhz Clock Speed
  • -31%

    Arduino Nano USB Programming Cable

    (0)
    Original price was: ₨289.00.Current price is: ₨199.00. Quick View

    The Arduino Nano USB Cable connects your compatible Arduino Nano board to a computer for sketch uploading, programming, and serial data communication. Featuring a USB Type-A to Mini-B connection, it is a practical accessory for microcontroller development, robotics experiments, sensor testing, and DIY electronics projects. Its compact design helps keep your workbench and project setup organized.

  • -55%
    Arduino Nano V3 board ATmega328P in Pakistan – Electronation

    Arduino Nano V3

    (6)
    Original price was: ₨1,650.00.Current price is: ₨749.00. Quick View
    • Microcontroller: Atmel ATmega168 or ATmega328.
    • Operating Voltage (logic level): 5 V.
    • Input Voltage (recommended): 7-12 V.
    • Input Voltage (limits): 6-20 V.
    • Digital I/O Pins: 14 (of which 6 provide PWM output).
    • Analog Input Pins: 8.
    • DC Current per I/O Pin: 40 mA.
    • Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB is used by the boot loader.
    • SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
    • EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
    • Clock Speed: 16 MHz.
    • Dimensions : 0.73 x 1.70
    • Length: 45 mm.
  • -15%

    Arduino Porto PCB

    (0)
    Original price was: ₨350.00.Current price is: ₨299.00. Quick View

    The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.

  • -30%
    Out Of Stock

    Arduino Pro Micro 5v 16m Atmega32u

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,399.00. Quick View
    • ATMEGA32U4 chip
    • Supply Voltage: 5VDC
    • Frequency: 16Mhz
    • Four 10 bit ADC pins
    • 12 pins Digital I/O
    • Dimension: 33mm x 18mm
  • -21%

    Arduino Pro Mini 5V 16Mhz ATMEGA328

    (0)
    Original price was: ₨1,399.00.Current price is: ₨1,099.00. Quick View
    1. 131 Powerful Instructions – Most Single Clock Cycle Execution
    2. Up to 20 MIPS Throughput at 20 MHz
    3. Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
    4. One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
    5. Real Time Counter with Separate Oscillator
    6. Six PWM Channels
    7. 8-channel 10-bit ADC in TQFP and QFN/MLF package
    8. Programmable Watchdog Timer with Separate On-chip Oscillator
    9. On-chip Analog Comparator
    10. 23 Programmable I/O Lines
  • -49%

    Arduino Proto Breadboard

    (0)
    Original price was: ₨679.00.Current price is: ₨349.00. Quick View
    • It has a nice standard 0.1×0.1 prototyping grid with big pads
    • Comes with Stacking headers and plain header, choose whichever you want when soldering together
    • A IC pattern for adding DIP ICs up to 20 pins
    • Power rails down the middle and sides
    • A reset button and an extra general use button
    • 2 3mm general use LEDs, red and green, as well as 2 matching resistors
    • A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
    • A surface-mount chip area for up to 14 SOIC size parts
    • Compatible with tiny breadboards
    • Every pin is brought out!
    • Gold plated pads
    • 2 x 0.1uF capacitors on either side for extra power stability
    • It has a nice standard 0.1×0.1 prototyping grid with big pads
  • -10%

    Arduino SD Card Reader Module

    (1)
    Original price was: ₨220.00.Current price is: ₨199.00. Quick View
    • Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
    • The level conversion circuit board that can interface level is 5V or 3.3V\
    • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
    • Communication interface is a standard SPI interface
    • 4 M2 screw positioning holes for easy installation
    • Size: 4.1 x 2.4cm
  • -15%

    Arduino Sensor Shield

    (0)
    Original price was: ₨350.00.Current price is: ₨299.00. Quick View
    • It has a Pin 13 LED pilot.
    • It has D0-D13 IO ports.
    • A0-A5 analog IO ports.
    • It contains a reset button.
    • It also contains a Power LED.
    • It has an SD card interface.
    • It contains an Ultrasonic interface.
    • This expansion board has an RS232 interface.
    • It has a Bluetooth interface.
    • It has an APC220 interface.
    • IIC interface.
    • 12864 LCD Parallel interfaces.
    • It contains 12864 LCD Serial Interface
  • -18%

    Arduino Starter Kit RFID Based

    (1)
    Original price was: ₨8,500.00.Current price is: ₨6,999.00. Quick View

    Arduino Starter Kit RFID Based walks you through the basics of using the Arduino & RFID in a hands-on way. You’ll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting from the basics of electronics to more complex projects, the kit will help you control the physical world with sensors and actuators.

    This kit aims to bring Arduino together with RFID technology, which will support individual production. With this kit, you will be able to use RFID with the code you wrote in Arduino. You will be able to come up with a practical technology such as Arduino, a technology that many people like RFID are trying to get into and stay away from using. All of the components and components required for RFID technology are combined in this kit.

    Radio Frequency Identification (RFID) is the given name to the technology used to identify objects using radio waves. An RFID microchip embedded in a tag, keychain or card communicates with the reader/writer module to transfer data.

  • -60%
    Arduino UNO R3 Dip

    Arduino UNO R3 Dip

    (4)
    Original price was: ₨3,500.00.Current price is: ₨1,399.00. Quick View
    • ATmega328 microcontroller
    • Input voltage – 7-12V
    • 14 Digital I/O Pins (6 PWM outputs)
    • 6 Analog Inputs
    • 32k Flash Memory
    • 16Mhz Clock Speed
    • ATmega328
    • Operating Voltage 5V
    • Input Voltage (recommended) 7-12V
    • Input Voltage (limits) 6-20V
    • Digital I/O Pins 14 (of which 6 provide PWM output)
    • Analog Input Pins 6
    • DC Current per I/O Pin 40 mA
    • DC Current for 3.3V Pin 150 mA
    • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
    • 2 KB (ATmega328) EEPROM
    • 1 KB (ATmega328)
    • Clock Speed 16 MHz
  • -47%

    Arduino UNO R3 Dip WITH CABLE

    (2)
    Original price was: ₨3,000.00.Current price is: ₨1,579.00. Quick View
    • ATmega328 microcontroller
    • Input voltage – 7-12V
    • 14 Digital I/O Pins (6 PWM outputs)
    • 6 Analog Inputs
    • 32k Flash Memory
    • 16Mhz Clock Speed
    • ATmega328
    • Operating Voltage 5V
    • Input Voltage (recommended) 7-12V
    • Input Voltage (limits) 6-20V
    • Digital I/O Pins 14 (of which 6 provide PWM output)
    • Analog Input Pins 6
    • DC Current per I/O Pin 40 mA
    • DC Current for 3.3V Pin 150 mA
    • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
    • 2 KB (ATmega328) EEPROM
    • 1 KB (ATmega328)
    • Clock Speed 16 MHz