-
-33%
74HC595 74HC595D Shift Register
Original price was: ₨60.00.₨40.00Current price is: ₨40.00. Quick View74HC595 8-BIT SERIAL-IN SERIAL OR PARALLEL-OUT SHIFT REGISTER contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.
-
This is a monostable multivibrator or pulse generator.
-
-44%
74LS158 is a high speed Quad 2-input Multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs.
-
- Dual Input IC with 4 OR Gates with an operating voltage range from 3V to 18V
- Fully Static and Medium Speed Operation: with tPHL, tPLH = 60ns (typ) at 10V
- DC input current: 10mA
- High-Voltage Type (20V Rating)
- Power Dissipation: 500mW
- Maximum propagation delay is 250ns.
- Standard symmetric output
- Minimum logic Low and High voltage @+5V is1.5V and 3.5V
- Maximum Transition Time is 200ns
-
-28%
74LS47 IC – Common Anode LED Driver
Original price was: ₨90.00.₨65.00Current price is: ₨65.00. Quick View74LS47 is a BCD to 7-segment decoder/driver IC. It accepts a binary coded decimal as input and converts it into a pattern to drive a seven-segment for displaying digits 0 to 9.
-
The voltage regulator IC maintains the output voltage at a constant value. 7805 provides +5V regulated power supply. Input voltage range 7V- 35V Current rating Ic = 1A Output voltage range VMax=5.2V ,VMin=4.8V.
-
-13%
- Input Voltage range: 8V to 25V
- Output Voltage: 5.75V(min) – 6.25V(max)
- Output Current: 1A
- Peak current: 2.2A
- Operating Temperature : 0 to +125 C
- Polarity: Positive
-
-13%
- 9V Positive Voltage Regulator
- Minimum Input Voltage is 11V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- PSRR / Ripple Rejection: 55 dB
- Output Type: Fixed
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-13%
7812 is a 12V Voltage Regulator that restricts the voltage output to 12V and draws 12V regulated power supply. The 7812 is the most common, as its regulated 12-volt supply provides a convenient power source for most TTL components. Output Voltage:12V. Output Current:1A. Input Voltage: 14.6 – 35VDC.
-
- 15V Positive Voltage Regulator
- Minimum Input Voltage is 17V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-13%
- Output voltage tolerances of ±2% at Tj = 25˚C and ±4% over the temperature range (LM340A)
- Line regulation of 0.01% of VOUT/V of ∆VIN at 1A load (LM340A)
- Load regulation of 0.3% of VOUT/A (LM340A)
- Internal thermal overload protection
- Internal short-circuit current limit
- Output transistor safe area protection
- P+ Product Enhancement tested
-
-13%
- 24V Positive Voltage Regulator
- Minimum Input Voltage is 33V
- Maximum Input Voltage is 40V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protections are available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
-
-13%
- 5V Negative Voltage Regulator
- Output Voltage: -5V
- Output Current: 1.5A
- Minimum Input Voltage is 7V
- Maximum Input Voltage is 25V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 and KTE package
-
-13%
- 12V Negative Voltage Regulator
- Minimum Input Voltage is -14.5V
- Maximum Input Voltage is -27V
- Peak Output Current is 2.2A
- Average Output Current is upto 1A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Available in TO-220 package only.
-
-36%
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
-
-26%
SIP Resistor Arrays (Single Inline Package) is an efficient way to pack several of the same value resistors into a convenient 0.1 spaced package. Available in different resistance values and number of pins. Pin 1 is identified with a dot above the pin also known as Resistor Networks.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
-20%
8051 Atmel AT89C51 Microcontroller 8-bit
Original price was: ₨500.00.₨399.00Current price is: ₨399.00. Quick View- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
8051 is an 8-bit family of microcontrollers developed by Intel. This microcontroller was also referred as a system on a chip because it has 128 bytes of RAM, 4K bytes of ROM, 2 Timers, 1 Serial port, and four ports on a single chip. The CPU can work for only 8 bits of data at a time because 8051 is an 8-bit processor. In case the data is larger than 8 bits then it has to be broken into parts so that the CPU can process conveniently.
-
-25%
The 8085 is an 8-bit general purpose microprocessor that can address 64K Byte of memory. It has 40 pins and uses +5V for power. It can run at a maximum frequency of 3 MHz.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
-
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
-
This tiny speaker is the perfect addition to any small audio project where you need an8impedance.
-
-18%
9N90 is a N-Channel enhancement mode power mosfet.
-
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
-
-19%
Out Of StockThe AD7528 is a monolithic dual 8-bit digital/analog converter featuring excellent DAC-to-DAC matching. It is available in skinny 0.3″ wide 20-lead DIPs and in 20-lead surface mount packages. Separate on-chip latches are provided for each DAC to allow easy microprocessor interface.
-
-13%
The AT89C52 is a lowe power, high performance CMOS 8-bit microcontroller with 8K bytes of Flash programmable and reaseable read only memory (PEROM). The on-chip flash allows the program memory to be reprogrammed in-syetem.
-
-20%
ATMEGA 328P ATMEGA328P-PU MICROCONTROLLER
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThe ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU),allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328P-PU AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.
-
-27%
Atmega8 Microcontrollers IC 8Kbytes
Original price was: ₨899.00.₨659.00Current price is: ₨659.00. Quick ViewThe Atmel AVR ATmega8 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8 achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.
-
-8%
Atmel Attiny85 Attiny-85 ATtiny85-20PU
Original price was: ₨1,200.00.₨1,099.00Current price is: ₨1,099.00. Quick ViewFeatures of ATtiny85 Microcontroller:-
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
- Package – SMD
-
- Small Signal NPN Transistor
- Current Gain (hFE): 450 (maximum)
- Continuous Collector current (IC) is 100mA
- Collector-Emitter voltage (VCEO) is 45V
- Collector-Base voltage (VCB0) is 50V
- Emitter Base Voltage (VBE0) is 6V
- Available in To-18 Metal can Package
-
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 900 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 10mA maximum
- Available in TO-18 Metal Can Package
- Maximum Collector-Base Voltage |Vcb|: 30 V’
- Collector Dissipation: 0.3 W
- Transition Frequency:150 MHz
- Operating Junction Temperature Max (Tj): 175 °C
- Noise Figure – 2 dB
- Operating and Storage Junction Temperature Range -65 to +175 °C
- Collector Capacitance 5pF
-
BC109 is a bipolar NPN type transistor. It has Collector-Emitter Volt (Vceo): 20V & Collector Current (Ic): 0.2A.
-
BC134 is a NPN type transistor. Its Maximum Collector-Base Voltage |Vcb|: 45 V & Maximum Collector Current |Ic max|: 0.2 A.
-
BC327 is a PNP bipolar junction transistor which is mainly designed for general purpose, small signal and switching applications.
-
This is the BC337, an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max.
-
-40%
BC547-B166 NPN Transistor 50V/ 0.3A
Original price was: ₨15.00.₨9.00Current price is: ₨9.00. Quick ViewOverall, the BC547 NPN transistor is a versatile and reliable transistor that is suitable for a wide range of applications. NPN Transistor BC547 is a popular choice for electronic hobbyists and engineers because it is inexpensive and easy to use. here are the specifications of the BC547-B166 NPN transistor:
- Collector current (maximum): 300mA
- Collector-emitter voltage (maximum): 65V
- Base current (maximum): 5mA
- Current gain (hFE): 110 to 800
- Package: TO-92
-
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 800 maximum
- Continuous Collector current (IC) is 500mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Available in To-92 Package
-
- Package Type: TO-92
- Transistor Type: PNP
- Max Collector Current(IC): -100mA
- Max Collector-Emitter Voltage (VCE): -45V
- Max Collector-Base Voltage (VCB): -50V
- Max Emitter-Base Voltage (VBE): -5V
- Max Collector Dissipation (Pc): 500 Milliwatt
- Max Transition Frequency (fT): 100 MHz
- Minimum & Maximum DC Current Gain (hFE): 125 to 800
- Max Storage & Operating temperature Should be: -65 to +150Centigrade
-
- Plastic casing NPN Transistor
- Continuous Collector current (IC) is 1.5A
- Collector-Emitter voltage (VCE) is 80 V
- Collector-Base voltage (VCB) is 80V
- Base Current (Ib) is 0.5A
- Emitter Base Breakdown Voltage (VBE) is 5V
- DC current gain (hfe) is 40 to 160
- Available in To-225 package
-
- Bi-Polar PNP Transistor
- Continuous Collector current (IC) is -1.5A
- Collector-Emitter voltage (VCE) is- 80 V
- Collector-Base voltage (VCB) is- 80V
- Base Current (Ib) is -0.5A
- Emitter Base Breakdown Voltage (VBE) is -5V
- DC current gain (hfe) is 40 to 160
- Available in To-225 and SOT-32 Package
- Collector Dissipation: 12.5 W
- Operating Junction Temperature Max (Tj): 150°C
-
- HF applications in radio and television receivers
- FM tuners
- Low noise AM mixer-oscillators
- IF amplifiers in AM/FM receivers
-
- Package Type: TO-92
- Transistor Type: NPN
- Max Collector Current(IC): 30mA
- Max Collector-Emitter Voltage (VCE): 20V
- Max Collector-Base Voltage (VCB): 30V
- Max Emitter-Base Voltage (VBE): 5V
- Max Collector Dissipation (Pc): 300 Milliwatt
- Max Transition Frequency (fT): 120 MHz
- Minimum & Maximum DC Current Gain (hFE): 35 to 125
- Max Storage, Operating & Junction temperature range: -65 to +150 Centigrade
-
-28%
- High forward surge current capability
- Ideal for printed circuit board
- High-temperature soldering guaranteed:
- 260°C/10 seconds, 0.375″ (9.5mm) lead length,
- 5 lbs (2.3kg) tension
- This series is UL recognized under component index, File number E194718
- RoHS Compliant
-
BT134 Triac – 600V – 4A (BT134-600E) Triac they are used in AC switching and control applications with current ratings from under 1A to 40A rms. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. It has Maximum Terminal current: 4A, Max Terminal Voltage is 600 V, Gate trigger current: 25mA & On-state Gate voltage: 1.7V.
-
- Maximum Terminal current: 4A
- On-state Gate voltage: 1.4V
- Gate trigger current: 10mA
- Max Terminal Voltage is 600 V
- Holding current: 2.2mA
- Latching current: 4mA
- Available in To-220 Package
-
The BT139 is a TRIAC thyristor, which is a type of semiconductor device that can use to control alternating current (AC) power. TRIAC thyristor BT139 is a four-quadrant device, meaning that it can conduct current in either direction. The BT139 has a peak inverse voltage (PIV) of 800 volts and a current rating of 16 amperes. It is a sensitive gate triac, meaning that it can be triggered with a low gate current. The on-state voltage drop of the BT139 is 1.2 volts. Here are some of the key features of the BT139-800E 4 Quadrant TRIAC:
- Peak inverse voltage (PIV): 800 V
- RMS current: 16 A
- Gate trigger current: 2.5 mA
- Gate trigger voltage: 1.4 V
- On-state voltage drop: 1.2 V
- Thermal resistance: 1.2 K/W (junction to mounting base)
- Operating temperature range: -40 to 125 °C
-
This thyristor is intented for use in applications requiring good bidirectional blocking voltage capability, high surge current capability and high thermal cycling performance.
-
-45%
The?BTA41 is a 3-pin Standard Insulated?TRIAC?for general purpose AC switching and can be used as ON/OFF function.
-
- 2sc925 well known as C945 NPN transistor.
- Max Voltage Collector Emmiter=50 V.
- Max Collector current=150 mA.
- Collector power dissipation: 400 mW.
- Japanese High-frequency amplifier NPN Transistor.
- Current Gain (hFE) is 70 to 700 (high linearity).
- Continuous Collector current (IC) is 150mA.
- Collector-Emitter voltage (VCEO) is 50 V.
- Collector-Base voltage (VCB0) is 60V.
- Emitter Base Voltage (VBE0) is 5V.
- Transition Frequency is 150MHz.
-
- Op-amp coupled with MOSFET at output
- Wide power supply Range
- Singe supply – 5V to 16V
- Dual supply – ±2.5V to ±8V
- Input Terminal current: 1mA
- Maximum Output Voltage: 13.3V
- Maximum source current: 22mA
- Maximum sink current: 20mA
- Supply current: 10mA
- Common Mode Rejection Ration (CMRR): 80dB
-
-33%
- Technology Family: CD4000
- VCC (Min) (V): 3
- VCC (Max) (V): 18
- Channels (#): 4
- Inputs per channel: 2
- IOL (Max) (mA): 6.8
- IOH (Max) (mA): -6.8
- Input type Standard: CMOS
- Output type: Push-Pull
- 5V–10V–15V parametric ratings
- Symmetrical output characteristics
- Speed: (tpd > 50ns)
- Data rate (Max) (Mbps): 8
- Rating: Catalog
- Operating temperature range (C): -55 to 125
-
- Wide supply voltage range 3.0V to 15V
- Low power 10 nW (typ.)
- High noise immunity 0.45 VDD (typ.)
- Buffered Inputs and Outputs
- Standard Symmetrical Output Characteristics
- 100% Tested for Maximum Quiescent Current at 20V
- 5V, 10V and 15V Parametric Ratings
- Maximum Input Current of 1A at 18V Over Full Package-Temperature Range; 100nA at 18V and +25oC
-
- Dual inputQuad NAND gate operation.
- Input voltage range: -0.5 to VDD +5V
- Power dissipation of 100mW per logic change.
- It is available in different outline packages
- The propagation delay time is 60ns
- All input and output pins are buffered for high throughput
- The output characteristics are standardized symmetric
- CD4011 draws a maximum input current of 1 Ampere at 18 volts
- Offers different noise margin level according to the input voltage level
- Temperature operating range is -55C to +125C
-
- Asynchronous Set-Reset Capability
- Static Flip-Flop Operation
- Medium-Speed Operation: 16 MHz (Typical) Clock Toggle Rate at 10-V Supply
- Standardized Symmetrical Output Characteristics
- Maximum Input Current Of 1- A at 18 V Over Full Package Temperature Range:
- 100 nA at 18 V and 25C
- Noise Margin (Over Full Package Temperature Range):
- 1 V at VDD = 5 V
- 2 V at VDD = 10 V
- 2.5 V at VDD = 15 V
-
- The supply voltage of IC 4017 ranges from 3V to 15V, usually +5V
- This IC is well-matched with Transistor-Transistor Logic or TTL.
- The operational speed/CLK speed of this IC is 5 MHz.
- It provides support to10 outputs that are decoded.
- It is available in different packages like 16-pin GDIP, PDIP & PDSO
- Input high time 30 ns
- Output current is 10 mA
- Noise immunity is high typically 0.45 VDD
- Operation is completely static
- Low power like 10 W
- Speed operation is medium like 5.0 MHz with 10V VDD
- Input Voltage or Vin ranges from 0.5 VDC to VDD +0.5 VDC
- TS or Storage Temperature ranges from 65C to +150C
- VDD or DC Supply Voltage ranges from 0.5 VDC to +18 VDC
- PD or Power Dissipation is Dual-In-Line is 700 mW
- TL or Lead Temperature is 260C
-
The CD4024 is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is reset to its logical 0 stage by a logical 1 on the reset input. The counter is advanced one count on the negative transition of each clock pulse.
-
-47%
The IC CD4026 is an IC which can perform the function of both a counter as well a 7-segment Driver. One single IC can be used to count form zero (0) to nine (9) directly on a Common Cathode type 7-segment display. The count can be increased by simply giving a high clock pulse; also more than one digit (0-9) can be created by cascading more than one CD4026 IC. So if you have a 7-segment (CC) display on which you have to display numbers that are being counted based on some condition then this IC will be a perfect choice.
-
- CD4027 Dual JK Flip Flop Package IC which operates at medium speed of 16 MHz typically with 10V supply
- Voltage range of 3.0V to 15V
- Static Flip-Flop Operation
- High noise immunity of 0.45 VDD(typ.)
- Set and Reset capability
- TTL compatible
- Low power of 50 nW (typ.)
- Input Rise/Fall time at 5V: 45us
- Maximum and minimum Input Voltage is 2 V and 0.8 V
-
The Exclusive OR gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N-Channel and P-Channel enhancement mode transistors. All inputs are protected against static discharge with diodes to VDD and VSS.
-
-11%
CD4033 is a simple decoder IC that is commonly used to drive Seven segment displays.
-
The CD4040 is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical 1 at the reset input independent of the clock.
-
- Wide supply voltage range: 3V to 15V
- Low power: 100 nW (typ.)
- High noise immunity: 0.45 VDD (typ.)
- Separate SET and RESET inputs for each latch
- NOR and NAND configuration
- 3-STATE output with common output enable
-
- Inverting IC that can convert High logic level to Low level
- High source and Sink Current as it has the capability of driving 2 TTL Loads at 5V over full temperature range.
- 100% Tested for Quiescent Current at 20 V
- Maximum Input Current of 1A at 18 V Over Full Package Temperature Range; 100 nA at 18 V and 25C
- 5-V, 10-V, and 15-V Parametric Ratings
- It is available in 16 pin packages of PDIP, SOIC, TSSOP, SO.
- Special input protection to protect inputs against static discharges.
-
The CD4050 hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage (VDD). The input signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers, and at VDD = 5.0V, they can drive directly two DTL/TTL loads over the full operating temperature range.
-
-30%
CD4051 Single 8-channel Multiplexer Demultiplexer
Original price was: ₨70.00.₨49.00Current price is: ₨49.00. Quick View- Analog and Digital Multiplexing and Demultiplexing
- A/D and D/A Conversion
- Signal Gating
- Factory Automation
- Televisions
- Appliances
- Consumer Audio
- Programmable Logic Circuits
- Sensors
-
- Wide range of digital and analog signal levels: digital 3 – 15V, analog to 15Vp-p
- Low “ON” resistance: 80Ω (typ.) over entire 15Vp-p
- signal-input range for VDD − VEE = 15V
- High “OFF” resistance:
- channel leakage of ±10 pA (typ.) at VDD − VEE = 10V
- Logic level conversion for digital addressing signals of
- 3 – 15V (VDD − VSS = 3 – 15V) to switch analog signals
- to 15 Vp-p (VDD − VEE = 15V)
- Binary address decoding on chip
-
-16%
- Logic Type: INVERTER / NOR / NAND
- Output Current: 6.8mA
- Supply voltage range: 3V to 18V
- Package Type: DIP
- Pin number: 14
- Operating temperature range: -55 ° C to +125 ° C
- Surface Mount Devices: through-hole mounting
-
- High-Voltage Types (20V Rating)
- CD4073BMS Triple 3-Input AND Gate
- CD4081BMS Quad 2-Input AND Gate
- CD4082BMS Dual 4-Input AND Gate
- Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
-
- High-Voltage Types (20V Rating)
- CD4071BMS Quad 2-Input OR Gate
- CD4072BMS Dual 4-Input OR Gate
- CD4075BMS Triple 3-Input OR Gate
- Medium Speed Operation: tPHL, tPLH = 60ns (typ) at 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
- Standardized Symmetrical Output Characteristics
-
The 4077 is a quad 2-input EXCLUSIVE-NOR gate. The outputs are fully buffered for the highest noise immunity and pattern insensitivity to output impedance. The 4077 operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input.
-
The CD4081 quad gate is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors. They have equal source and sink current capabilities and conform to standard B series output drive. The devices also have buffered outputs which improve transfer characteristics by providing very high gain. All inputs protected against static discharge with diodes to VDD and VSS.
-
- Operating Voltage: 5V, 10V, 15V DC
- Maximum Input Current: 1uA
- Hysteresis Voltage Typically 0.9 V at VDD: 5 V and 2.3 V at VDD: 10 V
- Noise Immunity Greater Than 50%
- Unlimited input rise and fall times
-
- High Voltage Type (20V Rating)
- 3-State Parallel Outputs for Connection to Common Bus
- Separate Serial Outputs Synchronous to Both Positive and Negative Clock Edges for Cascading
- Medium Speed Operation – 5MHz at 10V (typ)
- Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
- Noise Margin (Over Full Package/Temperature Range) – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V
- 5V, 10V and 15V Parametric Ratings
-
- Supply voltage ranges from 3v to 18v
- Set-up-time is 150, 70, and 40ns at 5v, 10v, and 15v respectively
- Strobe pulse width is 400, 160, and 100ns at 5v, 10v, and 15v respectively
- Hold time is zero
- 100% tested for quiescent current at 20v
- Having high input current of 1uA (max.) at 18v
- Maximum output current sourcing of 25mA
- Operating temperature ranges from -40 C to 85 C
- Storage temperature ranges from -65 C to 150 C
-
-34%
CD4538 – Dual Monostable Multivibrator
Original price was: ₨150.00.₨99.00Current price is: ₨99.00. Quick View- Wide supply voltage range 3.0V to 15V
- High noise immunity 0.45 VCC (typ.)
- Low power Fan out of 2 driving 74L TTL compatibility or 1 driving 74LS
- New formula: PWOUT e RC (PW in seconds, R in Ohms, C in Farads)
- g1.0% pulse-width variation from part to part (typ.) Wide pulse-width range 1 ms to %
- Separate latched reset inputs
- Symmetrical output sink and source capability
- Low standby current 5 nA (typ.) @ 5 VDC Y Pin compatible to CD4528
-
-33%
CD74HC21E 74HC21 Dual 4-Input Positive-AND Gates IC
Original price was: ₨60.00.₨40.00Current price is: ₨40.00. Quick View- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up To 10 LSTTL Loads
- Low Power Consumption, 20-?A Max ICC
- Typical tpd= 11 ns
- ?4-mA Output Drive at 5 V
- Low Input Current of 1 ?A Max
-
-15%
Center Tapped Transformer 12V 1.5Amp
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Input Voltage: 220V/AC
- Output Voltage: 12V/AC
- Output current: 1.5 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-14%
Center Tapped Transformer 12V 2.5AMP
Original price was: ₨520.00.₨449.00Current price is: ₨449.00. Quick View- Step-down Centre tapped Transformer
- Input Voltage: 220V AC at 50Hz
- Output Voltage: 12V, 12V or 0V
- Output Current: 2.5A
- Vertical mount type
- Low cost and small package
-
-15%
Center Tapped Transformer 220V/15V-0-15V 400MA
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 400MA current. Generally known as a Center tapped transformer.
-
-16%
Center Tapped Transformer 220V/15V-0-15V 600MA
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 600MA current. Generally known as a Center tapped transformer.
-
-15%
Center Tapped Transformer 9V 0.4Amp
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Input Voltage: 220V/AC
- Output Voltage: 9V/AC
- Output current: 0.4 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-29%
Center Tapped Transformer 9V 1.5AMP
Original price was: ₨450.00.₨319.00Current price is: ₨319.00. Quick ViewSpecifications:
- Input Voltage: 220V/AC
- Output Voltage: 9V/AC
- Output current: 1.5 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-33%
D-Type Flip-Flop 74HC175 DIP16 – SN74HC175N
Original price was: ₨60.00.₨40.00Current price is: ₨40.00. Quick View- Outputs can drive up to 10 LSTTL loads
- Contain four flip-flops with double-rail outputs
- 80A Maximum low power consumption
- 13ns Typical tpd
- 4mA Output drive at 5V
- 1A Maximum low input current
-
-28%
Specification
- Origin: China
- Type: DIAC
Package Type: Through Hole - Package: DO-35
- Breakover Voltage: 28v to 36v
- Typical Breakover voltage: 32v
- Output voltage: 5v
- Breakover current: 50µA
- Leakage current: 10µA
- Peak current: 0.30A
- Rise time: 2µs
- Operating junction temperature: -40℃ to +125℃
- Storage temperature range: -40°c – +125°c
-
-19%
Out Of StockDF005S Diode Bridge Rectifier 1.5A SOP-4 SMD
Original price was: ₨27.00.₨22.00Current price is: ₨22.00. Quick ViewBridge Rectifiers for PCB Surface Mount.
-
-51%
DS1302 is a tickle-charge timekeeping chip which contains a real-time clock/calendar and 31 bytes of static RAM. DS1302 uses serial communication to interact with microcontrollers. Also, it automatically adjust the date for the month with fewer days. Clock operates in 24hr or 12hr format with an AM/PM indicator. DS1302 chip is also commonly used as DS1302 RTC module which comes with a 32 kHz crystal and on-board battery backup all in a small SIP module that is compatible with a breadboard. DS1302 module are used by makers with Arduino, Raspberry Pi and other Micro-controllers.
-
The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
-
-26%
512 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground
. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
. Built-in multidrop controller ensures compatibility with other MicroLAN products
. EPROM partitioned into two 256-bit pages for randomly accessing packetized data
. Each memory page can be permanently write-protected to prevent tampering
. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data
. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page
. Reduces control, address, data, power, and programming signals to a single data pin
. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps
. 8-bit family code specifies DS2501 communications requirements to reader
-
-27%
4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF . 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF . 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor.Isolation test voltage 5000 VRMS. Input-output coupling capacitance < 0.5 pF .
-
-17%
EPROM 27C16 is a high speed 16K UV erasable and electrically reprogrammable CMOS EPROM ideally suited for applications where fast turnaround pattern experimentation and low power consumption are important requirements The 27C16 is packaged a 24-pin dual-in-line package.Access time down 450 ns Low CMOS power consumption Active Power 25 mW max Standby Power 53 mW max (98% savings) Performance compatible to NSC800TM CMOS microprocessor Single 5V power supply Pin compatible to MM2716 and higher density EPROMs Static no clocks required TTL compatible inputs outputs TRI-STATE output Windowed DIP Package Specifications guaranteed over full military temperature range 125 C).
-
-22%
Out Of StockThe HEF4104B is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high voltage circuits. For example low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high voltage LOCMOS. It has four data inputs (A0 to A3), an active HIGH output enable input (OE), four data outputs (B0 to B3) and their complements (B0 to B3).
-
-33%
HER107 HER-107 high efficiency rectifier diode
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick ViewFEATURES
Low forward voltage drop
High current capability High reliability
High surge current capability
High speed switching -
-50%
HI-LINK 120VAC-220VAC 5VDC 3W Power Supply
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick View- Input voltage:90-240 VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Low power consumption, environmental protection, no-load loss <0.1W
- 100% load aging and testing
- Operation Temperature: -20 — +60
- Store Temperature: -40 — +80
- Relative humidity: 5 — 95 %
- Cooling way by radiation
- Atmospheric pressure: 80—106 Kpa
- Sea level elevation: 2000 m
- Rated input voltage: 100-240 VAC
- Input voltage range: 90-264 VAC
- Meets UL and CE requirements
- Ultra-thin and ultra-small
-
-21%
Out Of Stock- HP2730 Opto Coupler IC
- Number of Channels: 2
- Voltage – Isolation: 2500 Vrms
- Current Transfer Ratio (Min): 300% @ 1.6 mA
- Turn On / Turn Off Time (Typ): 300 ns, 5 s
- Input Type: DC
- Output Type: Darlington
- Voltage – Output (Max): 7 V
- Current – Output / Channel: 60 mA
- Voltage – Forward (Vf) (Typ): 1.3 V
- Current – DC Forward (If) (Max): 20 mA
- Operating Temperature: -40C to 85C
- Mounting Type: Through Hole
- Package: 8-DIP (0.300″, 7.62mm)
-
-36%
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of 8 address bits and 4 data bits. Each address and data input is externally programmable or fed in using switches. The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. These ICs are paired with each other. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address and data, transmitted by a carrier using an RF transmission medium and gives output to the output pins after processing the data. These Ics have operating Voltage : 2.4V ~ 12V. They have Low Power and High Noise Immunity.
-
-18%
This is a IC Socket/Base for 28 pin SMD PLCC IC. This is a SMT base and is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC’s.
-
-20%
Out Of Stock -
- Guaranteed zero reading for 0 V input on all scales
- True polarity at zero for precise null detection
- 1pA typical input current
- True differential input and reference, direct display drive – LED lCL7107
- Low noise – less than 15 VP-P
- On-chip clock and reference
- Low power dissipation – typically less than 10mW
- No additional active circuits required
- Enhanced display stability
- Pb-free (RoHS compliant)
-
-38%
IN4001 Diode 4001 Rectifier Diode
Original price was: ₨8.00.₨5.00Current price is: ₨5.00. Quick View- Package Type: Available in DO-41 & SMD Packages
- Diode Type: Silicon Rectifier General Usage Diode
- Max Repetitive Reverse Voltage is: 50 Volts
- Average Fwd Current: 1000mA
- Non-repetitive Max Fwd Current: 30A
- Max Power Dissipation is: 3W
- Max Storage & Operating temperature Should Be: -55 to +175 Centigrade
-
-38%
- Average forward current is 1A
- Non-repetitive Peak current is 30A
- Reverse current is 5uA.
- RMS reverse voltage is 70V
- Peak repetitive Reverse voltage is 100V
- Available in DO-41 Package
-
-33%
IN4148 Diode 1N4148 / 1N914 Signal Diode
Original price was: ₨15.00.₨10.00Current price is: ₨10.00. Quick ViewVoltage – DC Reverse (Vr) (Max): 75VCurrent – Average Rectified (Io): 150mAVoltage – Forward (Vf) (Max) @ If: 1V @ 10mASpeed: Small Signal =< 200mA (Io), Any SpeedReverse Recovery Time (trr): 4nsCurrent – Reverse Leakage @ Vr: 5A @ 75VCapacitance @ Vr, F: 4pF @ 0V, 1MHzThermal Resistance: 300C/W JaMounting Type: Through HolePackage / Case: DO-204AH, DO-35, AxialSupplier Device Package: DO-35Operating Temperature – Junction: -65C ~ 175COther Names: 1N4148CT,1N4148CT-ND, 1N4148DICT, 1N914 -
-40%
IN5819 Diode SCHOTTKY DIODE 1N5819
Original price was: ₨15.00.₨9.00Current price is: ₨9.00. Quick View- Schottky Rectifier Diode
- Average forward current is 1A
- Forward Surge Current is 25A
- Forward Voltage Drop 600mV at 1A
- Peak reverse voltage is 40V
- RMS Reverse Voltage is 28V
- Available in DO-41 Package
-
-34%
IR2110 Mosfet & IGBT Gate Driver IC
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewThe IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
-
- Package Type: TO-220
- Transistor Type: N Channel
- Max Voltage Applied From Drain to Source: 55V
- Max Gate to Source Voltage Should Be: 20V
- Max Continues Drain Current is : 49A
- Max Pulsed Drain Current is: 160A
- Max Power Dissipation is: 94W
- Minimum Voltage Required to Conduct: 2V to 4V
- Max Storage & Operating temperature Should Be: -55 to +170 Centigrade
-
-14%
- N-Channel Power MOSFET
- Continuous Drain Current (ID) is 110A when VGS is 10V
- Minimum Gate threshold voltage 2V
- Drain to Source Breakdown Voltage: 55V
- Low On-Resistance of 8.0m
- Gate-Source Voltage is (VGS) is 20V
- Rise time is 101ns
- It is commonly used with Power Switching circuits
- Available in To-220 package
-
IRF4905 MOSFET is a P-Channel HEXFET Power MOSFET available in a TO-220AB package and is based on Advanced Process Technology. It is mainly used for fast switching purpose, capable of providing ultra-low on-resistance. This tiny device comes with three terminals called gate, drain and source where the gate terminal is used to control the current on remaining two terminals. The area between source and drain is known as a channel that is widely dependent on the voltage applied to the gate terminal.
-
- Fast Switching Applications
- Uninterruptible Power Supplies
- Battery Chargers
- Battery Management Systems
- Solar Battery Chargers
- Solar Uninterruptible Power Supplies
- Motor Driver Applications
- Telecommunication Applications
- Computer Related Applications
-
N-Channel Power MOSFET provide the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
- Dynamic dV/dt rating
- Repetitive avalanche rated
- Fast switching
- Ease of paralleling
- Simple drive requirements
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 10A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 400V
- Drain Source Resistance (RDS) is 0.55 Ohms
- Rise time and fall time is 27nS and 24nS
- Available in To-220 package
-
This Power MOSFET provides the circuit designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 8A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 500V
- Drain Source Resistance (RDS) is 0.85 Ohms
- Rise time and fall time is 23nS and 20nS
- Available in To-220 package
-
-15%
IRFP250 N-channel Power MOSFET
Original price was: ₨280.00.₨239.00Current price is: ₨239.00. Quick View- Repetitive Avalanche Ratings
- Dynamic dv/dt Rating
- Hermetically Sealed
- Simple Drive Requirements
- Ease of Paralleling
- Type Designator: IRF250
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
-
-38%
MOSFET (metal-oxide-semiconductor field-effect transistor, pronounced MAWS-feet) is a special type of field-effect transistor (FET) that works by electronically varying the width of a channel along which charge carriers (electrons or holes) flow. The wider the channel, the better the device conducts. The charge carriers enter the channel at the source and exit via the drain. The width of the channel is controlled by the voltage on an electrode called the gate, which is located physically between the source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.
-
-20%
Out Of StockK2045 Mosfet 2SK2045 TO-220F FET K2045 NPN
Original price was: ₨50.00.₨40.00Current price is: ₨40.00. Quick ViewLow ON resistance. Ultrahigh-speed switching. High-speed diode built in.
-
-13%
KBL406 5-600V 4A Bridge Rectifier
Original price was: ₨45.00.₨39.00Current price is: ₨39.00. Quick ViewBridge rectifier diode with a 4A current rating.
-
Bridge rectifier diode with a 6A current rating.
-
-11%
KBPC3502 Bridge Rectifier Diode 35A 200V
Original price was: ₨200.00.₨179.00Current price is: ₨179.00. Quick ViewBridge rectifier diode with a 35A current rating.
-
-14%
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
-20%
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression
-
-8%
L293E Push-Pull Four Channel Drivers
Original price was: ₨240.00.₨220.00Current price is: ₨220.00. Quick View- OVERTEMPERATURE PROTECTION
- OUTPUT CURRENT 1A PER CHANNEL
- INHIBIT FACILITY
- PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive)
- SEPARATE LOGIC SUPPLY
- HIGH NOISE IMMUNITY
-
-18%
The LF33CV is a very low drop voltage regulator. It has an output voltage of 3.3 V and a output current of 500 mA. Input voltage range 2.5V to 16V. It is suitable for low noise, low power applications and specially in battery powered systems.
-
-40%
LM-337 LM337 Variable Negative -VE Voltage Regulator IC
Original price was: ₨65.00.₨39.00Current price is: ₨39.00. Quick View- Used for Positive voltage regulations
- Variable power supply
- Current limiting circuits
- Reverse polarity circuits
- Commonly used in Desktop PC, DVD and other consumer products
- Used in motor control circuits
-
-9%
- Internally frequency compensated for unity gain
- Large DC voltage gain 100 dB
- Wide bandwidth (unity gain) 1 MHz (temperature compensated)
- Very low supply current drain (700 A) essentially independent of supply voltage
- Low input biasing current 45 nA (temperature compensated)
- Low input offset voltage 2 mV and offset current: 5 nA
- Input common-mode voltage range includes ground
-
- 3.3V, 5V, 12V, and adjustable output versions
- Adjustable version output voltage range, 1.2V to 37V ±4% max over line and load conditions
- Available in TO-220 and TO-263 packages
- Guaranteed 3A output load current
- Input voltage range up to 40V
- Requires only 4 external components
- Excellent line and load regulation specifications
- 150 kHz fixed frequency internal oscillator
- TTL shutdown capability
- Low power standby mode, IQ typically 80 µA
- High efficiency
- Uses readily available standard inductors
- Thermal shutdown and current limit protection
-
- Operates from single 5V supply
- Input current: 150 nA max. over temperature
- Offset current: 20 nA max. over temperature
- Differential input voltage range: 30V
- Power consumption: 135 mW at 15V
- Available in Q-Temp Automotive
- High-Reliability Automotive Applications
- Configuration Control and Print Support
- Qualification to Automotive Standards
-
The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% and typical load regulation of 0.1%. It includes current limiting, thermal overload protection, and safe operating area protection. Overload protection remains functional even if the ADJUST terminal is disconnected.
-
LM324 Operational Amplifier IC LM-324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages. Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902) Dual Supplies: 1.5 V to 16 V (13 V for LM2902) Low Supply-Current Drain.
-
-36%
LM338T 5A Adjustable Voltage Regulator LM-338T
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick ViewLM338T 5A Adjustable Voltage Regulator LM-338T is adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5 A over a 1.2-V to 32-V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage.
-
-20%
- Four individually operated voltage comparators
- Low noise interference among comparators
- Single Supply Operation: +3.0 V to +36 V
- Dual Supply Operation: +18V and -18V
- Low Input Bias Current: 25 nA
- Low Input Offset Current: 5.0 nA
- Low Input Offset Voltage
- Input Common Mode Voltage Range to GND
- Low Output Saturation Voltage: 130 mV @ 4.0 mA
- TTL and CMOS compatible
- ESD Clamps on the inputs increase reliability without affecting device operation
- Pb Free, Halogen Free/BFR Free and RoHS compliant
-
-11%
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output
-
-36%
LM358 LM358P DIP8 LM 358 LM358N DIP-8 IC
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick View- Very low supply current drain (500 A) essentially independent of supply voltage
- Low input offset voltage: 2 mV
- Input common-mode voltage range includes ground
- Differential input voltage range equal to the power supply voltage
- Large output voltage swing: 0V to V+ 1.5V
- Internally frequency compensated for unity gain
- Large dc voltage gain: 100 dB
- Wide bandwidth (unity gain): 1 MHz (temperature compensated)
-
-17%
LM386 LM-386 Audio Amplifier Chip
Original price was: ₨35.00.₨29.00Current price is: ₨29.00. Quick ViewLM386 is a widely used audio amplifier IC manufactured in 8 pin dip, VSSOP, SOIC and other packages. The IC is basically designed for low voltage commercial applications, apart from commercial applications it is also a famous IC among electronic hobbyists and experimenters. The internal gain of the IC is set to 20 but it can be adjusted by connecting a resistor and a capacitor in series between the pin number 1 and 8, by this procedure the user can adjust the gain between 20 to 200. Due to the small size, low quiescent current and low voltage requirements this IC is ideal to use in wide variety of portable battery operated applications and devices.
-
-20%
- Analog Controlled LED Driver IC
- Number of controllable LEDs: 10
- Operating Voltage: 3V to 18V
- Input Analog voltage range: 1.2V to 12V
- LED sink current: 2mA to 30mA (programmable)
- Both Dot/Bar mode available
- Can be cascaded to control upto 100 LEDs
- Available in 18-pin DIP package
-
-26%
- Analog Controlled LED Driver IC with Logarithmic output
- LED incremented by one step for every 3dB
- Monitor upto 30dB using 10 LEDs
- Number of controllable LEDs: 10
- Operating Voltage: 3V to 25V
- Reference Voltage: 1.2V to 12V
- LED sink current: 1mA to 30mA (programmable)
- Both Dot/Bar mode available
- Available in 18-pin DIP, PLCC package
-
-36%
LM393 Dual COMPARATOR Low Offset Voltage IC
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick View- Voltage Comparator circuits
- Can drive Relay, Lamp, Motor Etc
- Zero Crossing detector
- Peak voltage Detector
- High Voltage protection/Warning
- Oscillator circuits
-
-13%
- Ultra Low Power Consumption 0.7 μA
- Wide Range of Supply Voltages 2V to 8V
- Input Common-Mode Range Beyond V+ and V−
- Open Collector and Push-Pull Output
- High Output Current Drive: (@ VS = 5V) 45 mA
- Propagation Delay (@ VS = 5V, 10 mV Overdrive) 25 μs
- Tiny 5-Pin SOT-23 Package
- Latch-up Resistance >300 mA
- LMC7215-Q1 is an Automotive Grade Product that is AEC-Q100 Grade 3 Qualified.
-
The LM741 series are general-purpose operational amplifiers which feature improved performance over industry.The amplifiers offer many features : overload protection on the input and output, no latch-up when the common-mode range is exceeded, as well as freedom from oscillations. The LM741C is identical to the LM741 and LM741A except that the LM741C has their performance ensured over a 0C to +70C temperature range, instead of 55C to +125C.