Shop

Default sorting
Show
32
  • -21%
    Encoder Coupling Flexible 4x4 ShaftQuick View

    Encoder Coupling Aluminum Flexible 3mmx8mm Shaft

    (0)
    Original price was: ₨1,100.00.Current price is: ₨870.00.
    • Material: Aluminum Alloy
    • Total Length: 25mm
    • Outer Diameter: 19mm
    • Shaft: 3×8
    • Easy to install, buffer, damping, convenient to disconnect.
    • Color: Silver
  • -21%
    Encoder Coupling Flexible 4x4 ShaftQuick View

    Encoder Coupling Aluminum Flexible 4mmx4mm Shaft

    (0)
    Original price was: ₨1,100.00.Current price is: ₨870.00.
    • Material: Aluminum Alloy
    • Total Length: 25mm
    • Outer Diameter: 19mm
    • Shaft: 4mmx4mm
    • Easy to install, buffer, damping, convenient to disconnect.
    • Color: Silver
  • -21%
    Encoder Coupling Flexible 4x8 ShaftQuick View

    Encoder Coupling Aluminum Flexible 4mmx8mm Shaft

    (0)
    Original price was: ₨1,100.00.Current price is: ₨870.00.
    • Material: Aluminum Alloy
    • Total Length: 25mm
    • Outer Diameter: 19mm
    • Shaft: 4mmx8mm
    • Easy to install, buffer, damping, convenient to disconnect.
    • Color: Silver
  • -21%
    Encoder Coupling Flexible 4x8 ShaftQuick View

    Encoder Coupling Aluminum Flexible, 5mmx8mm Shaft

    (0)
    Original price was: ₨1,100.00.Current price is: ₨870.00.
    • Material: Aluminum Alloy
    • Total Length: 25mm
    • Outer Diameter: 19mm
    • Shaft: 3×8
    • Easy to install, buffer, damping, convenient to disconnect.
    • Color: Silver
  • -25%
    Quick View

    Encoder Coupling Aluminum Metal flexiable 6mmx6mm

    (0)
    Original price was: ₨1,200.00.Current price is: ₨899.00.
    • Easy to install, buffer, damping, convenient to disconnect.
    • A shaft coupler is Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
    • The size refers to the hole, for example, 4mm x 5mm means the hole diameter of one side is 4mm and the other side is 5mm.
  • -36%
    Quick View

    Encoder Coupling Aluminum MetalFlexiable 6mmx8mm

    (0)
    Original price was: ₨1,400.00.Current price is: ₨899.00.
    • Material: Aluminum Alloy
    • Total Length: 25mm
    • Outer Diameter: 19mm
    • Shaft: 6mm x 8mm
  • -17%
    Quick View

    EPROM 27C16

    (0)
    Original price was: ₨300.00.Current price is: ₨249.00.

    EPROM 27C16 is a high speed 16K UV erasable and electrically reprogrammable CMOS EPROM ideally suited for applications where fast turnaround pattern experimentation and low power consumption are important requirements The 27C16 is packaged a 24-pin dual-in-line package.Access time down 450 ns Low CMOS power consumption Active Power 25 mW max Standby Power 53 mW max (98% savings) Performance compatible to NSC800TM CMOS microprocessor Single 5V power supply Pin compatible to MM2716 and higher density EPROMs Static no clocks required TTL compatible inputs outputs TRI-STATE output Windowed DIP Package Specifications guaranteed over full military temperature range 125 C).

  • -47%
    Quick View

    EPS8266 12F WiFi Board

    (0)
    Original price was: ₨750.00.Current price is: ₨399.00.
    • Its model is ESP-12F.
    • Its package is SMD22.
    • Its size is 24 x 16 x 3 (+- 0.2)mm.
    • Its certification is from FCC, CE,C,REACH,RoHS.
    • It has default 32Mb SPI flash.
    • It has a UART/ADC/GPIO/PWM interface.
    • It has 9 input-output ports.
    • It supports 300-4608000 bps and default 115200 bps UART baud rate.
    • Its frequency range is 2412- 2484 MHz.
    • It has a PCB antenna.
    • Its power value is 500mA.
    • Its modem sleep value is -20mA.
    • Its light sleep value is -2mA.
    • Its deep sleep value is -0.02mA.
    • Its security is WEP/WPA-PSK/WPA2-PSK
    • Its power supply voltages are 3 to 3.6V.
    • Its current value is >500mA.
    • Its operating temperature is -20 to 85-degree centigrade.
    • Its storage environment is -40 to 85-degree centigrade.
    • Its default baud rate is 115200.
    • It has a TTL serial port level.
  • -19%
    Quick View

    ESC 30A Standard 30A BLDC ESC Electronic Speed Controller

    (2)
    Original price was: ₨2,099.00.Current price is: ₨1,699.00.

    Standard 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs.

  • -14%
    Quick View

    Esp Adaptor with Temp Sensor

    (0)
    Original price was: ₨640.00.Current price is: ₨550.00.

    ESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.

  • -8%
    Quick View

    ESP-01 Adapter Module 3.3-5V

    (0)
    Original price was: ₨270.00.Current price is: ₨249.00.
    • For Arduino series motherboards or compatible motherboards can be used directly.
    • Power supply voltage: 5V
    • Module operating current: 240mA (max.)
    • Baud rate: Default 115200, can be modified by command
    • Wireless network mode: station / softAP / SoftAP + station
    • Wireless standard: 802.11 b / g / n
    • WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
    • With a command set, and simple development, start quickly
    • Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
  • -40%
    Quick View

    ESP-12E WiFi Module

    (0)
    Original price was: ₨500.00.Current price is: ₨299.00.
    • Added six I/O serial and six SPI serial
    • Support wireless 802.11 b/g/n standard
    • Support the STA/AP/STA AP three work modes
    • Built-in TCP/IP protocol stack, and support multiple TCP Client connection
    • Support rich Socket the AT command
    • Support UART/GPIO data communication interface
    • Support Smart Link intelligent networking
    • Support remote firmware update (OTA)
  • -31%
    Quick View

    ESP32 CAM MB USB Programmer Board CH340G USB To Serial Port

    (0)
    Original price was: ₨650.00.Current price is: ₨449.00.

    • Driver Compatibility: Requires CH340G driver installation for proper operation.

    • Supported Devices: Compatible with all ESP32-CAM boards.

    • Button Types: Includes Reset and Boot buttons.

    • LED Indicators: Power status indication.

  • -38%
    Quick View

    ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3

    (3)
    Original price was: ₨2,400.00.Current price is: ₨1,499.00.
    • 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
    • Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
    • Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
    • Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
    • Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
    • Bluetooth 5 (LE)
    • 45 programmable GPIOs
    • No integrated ethernet MAC
    • 2 × 12-bit SAR ADCs, up to 20 channels
    • USB OTG
  • -43%
    Quick View

    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module

    (4)
    Original price was: ₨2,000.00.Current price is: ₨1,139.00.
    • CPU Tensilica Dual-Core 32-bit 240 MHz LX6 processors, integrated 520 Kb SRAM
    • Wifi 802.11 b/g/n/e/i
    • Bluetooth v4.2 BR/EDR and BLE
    • Memory 4 MByte Flash
    • Temperature Range -40 to 125 Deg C.
  • -27%
    Quick View

    ESP32 WROOM-32 Wifi+Bluetooth MCU Module 30 Pin

    (3)
    Original price was: ₨1,500.00.Current price is: ₨1,099.00.
    1. Single or Dual-Core 32-bit LX6 Microprocessor with clock frequency up to 240 MHz.
    2. 520 KB of SRAM, 448 KB of ROM and 16 KB of RTC SRAM.
    3. Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
    4. Support for both Classic Bluetooth v4.2 and BLE specifications.
    5. 34 Programmable GPIOs.
    6. Up to 18 channels of 12-bit SAR ADC and 2 channels of 8-bit DAC
    7. Serial Connectivity includes 4 x SPI, 2 x I2C, 2 x I2S, 3 x UART.
    8. Ethernet MAC for physical LAN Communication (requires external PHY).
    9. 1 Host controller for SD/SDIO/MMC and 1 Slave controller for SDIO/SPI.
    10. Motor PWM and up to 16 channels of LED PWM.
    11. Secure Boot and Flash Encryption.
    12. Cryptographic Hardware Acceleration for AES, Hash (SHA-2), RSA, ECC and RNG.
  • -21%
    Quick View

    ESP32-C3 Super Mini WiFi & BLE Development Board

    (0)
    Original price was: ₨800.00.Current price is: ₨629.00.

    The ESP32-C3 Super Mini WiFi & BLE Development Board is a compact, powerful microcontroller featuring a 32-bit RISC-V processor, built-in 2.4GHz WiFi, Bluetooth 5.0 Low Energy (BLE), and USB Type-C connectivity. Ideal for IoT projects, smart home automation, wireless sensors, and embedded electronics.

    Key Features:

    • Processor: 32-bit RISC-V single-core, up to 160MHz
    • WiFi: Built-in 2.4GHz (802.11 b/g/n)
    • Bluetooth: Bluetooth 5.0 Low Energy (BLE)
    • USB Interface: Type-C for programming and power
    • GPIO Logic: 3.3V
    • Interfaces: I2C, SPI, UART, PWM and ADC
    • Programming: Arduino IDE and ESP-IDF
    • Design: Ultra-compact, lightweight and breadboard-friendly
    • Applications: IoT, robotics, smart switches, home automation and wireless monitoring

    Buy ESP32-C3 Super Mini in Pakistan from Electronation Pakistan for your next electronics or IoT project.

  • -16%
    Quick View

    ESP32-CAM WiFi + Bluetooth Camera Module

    (4)
    Original price was: ₨1,900.00.Current price is: ₨1,599.00.
    • Module Model: ESP32-CAM
    • Package: DIP-16
    • Size: 2740.54.5(?0.2)mm
    • SPI Flash: Default 32Mbit
    • RAM: Internal 520KB + External 4M PSRAM
    • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
    • Wi-Fi: 802.11 b/g/n/e/i
    • Support Interfaces: UART, SPI, I2C, PWM
    • TF Card Support: Maximum 4G
    • IO Port: 9
    • Serial Port Rate: Default 115200 bps
    • Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
    • Antenna: Onboard PCB antenna with a gain of 2dBi
    • Power Supply Range: 5V
    • Operating Temperature: -20°C to 85°C
  • -47%
    Quick View

    ESP8266 ESP-01 WiFi Module

    (1)
    Original price was: ₨600.00.Current price is: ₨319.00.
    • 802.11 b/g/n
    • Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP Protocol Stack
    • Integrated TR switch, balun, LNA, power amplifier, and matching network
    • Integrated PLLs, regulators, DCXO, and power management units
    • +19.5dBm output power in 802.11b mode
    • Power down leakage current of <10uA
    • 1 Mb flash memory
    • Integrated low-power 32 bit CPU could be used as an application processor
    • SDIO 1.1/ 2.0, SPI, UART
    • STBC, 1×1 MIMO, 2×1 MIMO
    • A-MPDU and A-MSDU aggregation and 0.4ms guard interval
    • Wake up and transmit packets in <2ms
    • Standby power consumption of <1.0mW(DTIM3)
  • -30%
    Quick View

    ESP8266 ESP12E -NODEMCU – CH340

    (3)
    Original price was: ₨999.00.Current price is: ₨699.00.
    • Input Voltage: 2.5 ~ 3.6V
    • Operating Voltage: 3.3V
    • CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
    • 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
    • 512 KB of EEPROM (512x Arduino UNO!)
    • External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
    • IEEE 802.11 b/g/n Wi-Fi
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • WEP or WPA/WPA2 authentication, or open networks
    • Digital I/O Pins (DIO): 16
    • Analog Input Pins (ADC): 1
    • UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
    • SPIs: 1
    • I2Cs: 1
    • Flash Memory: 4 MB
    • SRAM: 64 KB
    • Clock Speed: 80 Mhz
    • 80 Mhz clock (5x arduino UNO or mega!)
  • -29%
    Quick View

    ESP8266 NodeMCU V1.0 ESP-12E WiFI Module

    (0)
    Original price was: ₨1,099.00.Current price is: ₨779.00.
    • Microcontroller:      ESP-8266 32-bit
    • Clock Speed:             80 MHz
    • USB Converter:        CP2102
    • USB Connector:       Micro USB
    • Operating Voltage:  3.3V
    • Flash Memory:         4 MB
    • Digital I/O:                11
    • Analog Inputs:          1
    • Communications:     Serial, SPI.  I2C and 1-Wire via software libraries
    • WiFi:                           Built-in 802.11 b/g/n
  • -18%
    Quick View

    ESP8266 Witty Cloud ESP-12F WiFi Module

    (0)
    Original price was: ₨1,099.00.Current price is: ₨899.00.
    1. LDR Light Sensor on board.
    2. WS2812 Led on board.
    3. Includes CH340G USB-to-UART programmer.
    4. Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
    5. Supports 3 modes: AP, STA, AP+STA.
    6. Dimensions: 24mm x 16mm.
    7. Micro USB connection for power and/or programming
  • Quick View

    EVK407I, STM32F4 Development Board

    (0)
    ₨7,250.00

    STM32 development board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART

  • -23%
    Quick View

    Extruder Kit With NEMA 17 Stepper Motor

    (0)
    Original price was: ₨6,500.00.Current price is: ₨4,999.00.

    Buy Nema 17 with MK8 Aluminum Extruder Kit At electronation in best price

  • -23%
    Quick View

    Ferric Chloride for PCB Etching

    (0)
    Original price was: ₨260.00.Current price is: ₨199.00.

    1. Suggested only if you know how to etch PCBs with FeCl3.

    2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.

    3. Mix etchant in water, do not drop water over the etchant.

    4. Do an etching procedure in open space so any chemical gas produced during the process can dissipate in the air easily.

    5. Put etchant+water solution in the plastic box only.

    Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.

    Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measures are in place like hand gloves, glasses, etc.

  • -31%
    Quick View

    Flame Sensor Module

    (0)
    Original price was: ₨200.00.Current price is: ₨139.00.
    • Photosensitivity is high
    • Response time is fast
    • Simple to use
    • Sensitivity is adjustable
    • Detection angle is 600,
    • It is responsive to the flame range.
    • Accuracy can be adjustable
    • Operating voltage of this sensor is 3.3V to 5V
    • Analog voltage o/ps and digital switch o/ps
    • The PCB size is 3cm X 1.6cm
    • Power indicator & digital switch o/p indicator
    • If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
  • -31%
    Quick View

    Flex Sensor 2.2 Inch

    (0)
    Original price was: ₨3,600.00.Current price is: ₨2,499.00.
    • Angle Displacement Measurement
    • Bends and Flexes physically with motion device
    • Possible Uses
    • Simple Construction
    • Low Profile
    • Physical Therapy
    • Musical Instruments
    • Computer Peripherals
    • Medical Devices
    • Gaming (Virtual Motion)
    • Robotics
  • -13%
    Quick View

    Flex Sensor 4.5″

    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00.
    • Thickness: 0.4mm
    • Trigger Force: 20g, triggered (default resistance<200kΩ)
    • Pressure Measuring Range: 20g~6kg
    • Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
    • Initial Resistance: >10MΩ
    • Activation Time: <0.01S
    • Operating Temperature: -40℃~+85℃
    • Lifespan: >1million times
    • Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
    • Response Time: <10ms
    • Drift: <5%, 2.5Kg Force, Static load 24H
  • -19%
    Quick View

    FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver

    (0)
    Original price was: ₨21,500.00.Current price is: ₨17,500.00.

    The FS-CT6B is a professional and practical 2.4GHz 6-Channel digital LCD transmitter, which is equipped with a FS-R6B receiver to make a digital proportional radio control system, and suitable for RC airplane, glider and helicopter. The transmitter adopts easy-to-read LCD screen to show the working status.

  • -32%
    Quick View

    Force Sensitive Resistor – Small

    (0)
    Original price was: ₨1,899.00.Current price is: ₨1,299.00.

    This is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

    Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.

    These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

  • -15%
    Quick View

    Force Sensitive Resistor 0.5 INCH FSR

    (0)
    Original price was: ₨1,350.00.Current price is: ₨1,150.00.
    • Detection area (detection range): 14.5 mm circle
    • Physical Diameter: 18.3mm circle
    • The output signal (output signal): Passive variable to hold
    • The Force-sensitive range (range), pressure test: 100g to 10 kg
    • Lifespan (life):> 10 m letter actuation

    Dimensions:

    • Total length: 56mm
    • Overall width: 18.3mm
    • Diameter detection: 14.5mm
    • Thickness: 0.4mm
  • Quick View

    FS-T6 FlySky 6-Channel Quadcopter Transmitter

    (0)
    ₨10,499.00

    FlySky Introduces its newest 6 channel 2.4GHz system, The FS-T6. After years of success with the CT6B, FlySky presents the new FS-T6 with loads of cool and convenient features making the operation of this transmitter simple and instinctive.

    The 6-channel FlySky FS-T6 is the perfect transmitter for sport modelers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and airplanes. It even has the ability to store 20 models allowing the user to save a whole fleet of aircrafts.

    Programming the FS-T6 is very easy and intuitive. It is implemented with a simple click and scroll dial allowing quick and easy menu navigation and manipulation. The large backlite LCD screen with large fonts is easy to read and the simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you’re making.

    FlySky AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz system offers a lot of advantages. It is equipped with a super active and passive anti-jamming capability and has very low power consumption with high receiver sensitivity. The 2.4GHz system puts the radio out of the frequency range by any generated by other electronic components in your model such as the brushless motor, speed controller, servos, or other metal to metal noise. This eliminates interference and glitching that can plague a traditional radio system. Extreme rigorous testing by FlySky engineers makes this AFHDS system solid and worthy.