-
Interfacing EMG Muscular Signal Sensor
Original price was: ₨6,000.00.₨4,499.00Current price is: ₨4,499.00. Quick ViewFeatures:
- Small Form Factor
- Specially Designed for Microcontrollers
- Adjustable Gain using onboard potentiometer
- 5mm Connector
Applications:
- Video games
- Robotics
- Medical equipment
-
Transmitter (Tx):
- Power: 0.1W.
- Absolute Maximum Forward Current: 50mA.
- Launch Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.1V.
- Diameter: 5mm.
Receiver (Rx):
-
- Power: 0.15W.
- Maximum Current: 30mA.
- Receiving Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.2V.
- Diameter: 5mm.
-
IR Infrared sensor Two way Obstacle Sensor
Original price was: ₨200.00.₨109.00Current price is: ₨109.00. Quick View- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
-
IR Obstacle Avoidance Sensor
Original price was: ₨250.00.₨135.00Current price is: ₨135.00. Quick View- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35
- Comparator chip: LM393
- 3mm screw holes for easy mounting
-
IR Proximity Sensor 0A4-1SK
Original price was: ₨950.00.₨900.00Current price is: ₨900.00. Quick View- Type of sensor: photoelectric
- Range : 40~300mm(1.5 to 12)
- Output configuration: Analogue voltage
- Operation mode: Diffuse-reflective
- Supply voltage: -0.3~7V DC
- Connection: S3B-PH
- Max operating current: 22mA
- Average current consumption: 12 mA
- Output voltage differential over distance range: 2.3 V (typical)
- Update period: 16.5 4 ms
- Size: 44.5 mm x 18.9 mm x 13.5 mm (1.75 x 0.75 x 0.53)
- Operating temperature: -10~60C
- Body material: Plastic
-
IR receiver VS1838B TL1838 – 38KHz
Original price was: ₨90.00.₨70.00Current price is: ₨70.00. Quick View- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz Diode
- Voltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz DiodeVoltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
-
- Operating Voltage: 3.3-5V
- Fixing Screw Hole: M3
- Distance setting from 1mm to 10cm
- Control Card Dimensions: 42x38x12mm
- Sensor Dimensions: 25x12x12mm
- Card Output: Digital
-
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is 20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Rise time and fall time is about 60ns and 45ns respectively.
- It is commonly used with Arduino, due to its low threshold current.
-
Isd1820 Recording And Playback Module With On Board Mic And Loud Speaker
Original price was: ₨680.00.₨439.00Current price is: ₨439.00. Quick View- The main chip: is ISD1820.
- Dimensions: 43 x 34 x 11 (LxWxH) mm.
- The working voltage: is DC 3V-5V.
- Loudspeaker: 8 Ohm, 0.5W.
- An easy-to-use 10-second voice recording.
- High-quality, natural voice restored.
- It can be used as a propaganda module.
- With looping, jog playback, and single-pass play function.
- Available single-chip control.
- This module can directly drive a small speaker 8 ohm 0.5W.
- Power supply: 3-5V, which can be accessed by pin power.
- Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
-
JSN-SR04T Waterproof Ultrasonic Sensor Module
Original price was: ₨1,400.00.₨1,299.00Current price is: ₨1,299.00. Quick View- Operating Voltage: 5V DC
- Static Operating Current: 5mA
- Operating Current: 30mA
- Acoustic Emission Frequency: 40kHz
- Maximum range: 4.5m
- Minimum range: 25cm
- Connection pins: +5V, Trig, Echo, GND
- Module Dimensions: 41mm * 28.5mm
- Sensitivity: ~0.5cm
- Sight Angle: <50
- Operating Temperature: -10 ~ 70 C
- Storage Temperature: -20 ~ 80 C
-
K Type Waterproof Thermocouple
Original price was: ₨599.00.₨459.00Current price is: ₨459.00. Quick View- Premium quality: Waterproof insulation lead, rustproof with stainless steel material and fiberglass.
- Good performance: Wire can withstand 400℃ high temperature.
- Application: It consists of two different conductors that produce a voltage proportional to a temperature difference between either end of the pair of conductors.
- 2 terminals: K-type thermocouple with flexible spring, 2 terminals for easy connection.
- Multi-purpose: Widely used for industrial or laboratory testing equipment temperature.
- Use: Fits all temperature controllers.
-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×3 type 12 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipment’s, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed.
-
- Using 5050 full-color LED.
- RGB tricolour current一limiting resistance to prevent burnout.
- Through the PWM adjusting three primary colors can be mixed to obtain different colors.
- With a variety of single一chip interfaces.
- Working Voltage: 5V.
- LED Drive Mode: Common cathode driver.
-
KY-021 Mini Magnetic Reed Module for Arduino
Original price was: ₨270.00.₨149.00Current price is: ₨149.00. Quick View- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
-
- Driver Model: L298N 2A
- Driver Chip: Double H Bridge L298N
- Motor Supply Voltage (Maximum): 46V
- Motor Supply Current (Maximum): 2A
- Logic Voltage: 5V
- Driver Voltage: 5-35V
- Driver Current:2A
- Logical Current:0-36mA
- Maximum Power (W): 25W
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
-
Large 20mm LDR Photoresistor Sensor Photo Sensor
Original price was: ₨300.00.₨149.00Current price is: ₨149.00. Quick View- Diameter: 20mm
- Max Voltage: 500V
- Max power consumption: 500mW
- Operating Temperature: 30+70C
- Light Resistance: 5-100K ohm
- Dark Resistance: 1-8M ohm
-
Laser Diode Module 650nm 5v Laser Light Module Ky008
Original price was: ₨180.00.₨99.00Current price is: ₨99.00. Quick View- Voltage: 3.0 V – 5 V.
- Output: red laser straightly(650nm).
- Driver: APC circuit.
- Size: Φ 12.0 x35mm.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating temperature: -36 ~ 65◦C.
- Pot size: 15 meters spot for φ10 mm ~ φ15.
- Outer diameter: 6 mm.
-
LCD Green 20×2 display module (JHD202C)
Original price was: ₨315.00.₨252.00Current price is: ₨252.00. Quick View- Color of display: Green
- Color of character: Yellow
- Size : 20 x 2 (20 character x 2 rows)
- Input voltage: +5V
- Supply current: 1.5mA
- Board dimensions : 116mm x 38mm (LxB)
- Display dimensions : 83mm x 19mm (LxB)
-
LCD I2C Module IIC/I2C Serial Interface Adapter
Original price was: ₨300.00.₨219.00Current price is: ₨219.00. Quick View- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
-
- Camera Exposure control
- Auto slide focus dual cell
- Photocopy machines density of toner
- Colorimetric Test Equipment
- Densitometer
- Electronics scales dual cell
- Automatic gain control modulated light source
- Automated Rear View Mirror
-
-
Light Sensitive LDR Relay Module 12V
Original price was: ₨600.00.₨469.00Current price is: ₨469.00. Quick View- Automatically controls the relay based on light intensity
- Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
- Adjustable light level set-point
- Controls loads of 115/230VAC @ 10A
- Controls loads of 0 15VDC @ 10A
- Both NO (Normally Open) and NC (Normally Closed) contacts
- LED indicator when the relay is energized
- 12V power operation
-
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
-
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Original price was: ₨1,500.00.₨999.00Current price is: ₨999.00. Quick ViewProximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
-
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output
-
LM35 Temperature Sensor Module
Original price was: ₨300.00.₨275.00Current price is: ₨275.00. Quick View- Calibrated directly in Degree Celsius
- Linear + 10.0 mV/C scale factor
- 0.5C accuracy guarantee-able (at +25C)
- Rated for full 55 to +150C range
- Operates from 4 to 30 volts
- Less than 60mA current drain
- Low self-heating, 0.08C in still air
-
LM393 LDR OPTICAL SENSITIVE RESISTANCE MODULE LIGHT
Original price was: ₨250.00.₨129.00Current price is: ₨129.00. Quick View- For Light intensity detected,light brightness sensors,Smart car module
- Using the sensitive type photosensitive resistance sensor
- Waveform of the comparator output signal is good,strong driving ability
- With adjustable potentiometer can adjust and detect the brightness of the light
- Come with bolt holes for easy installation
-
- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
-
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
- Output Impedance: 1000±10% Ω
- Maximum working voltage: 15V DC
- Operating temperature range: -20~60°C
- Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L x W x H)
-
- Capacity: 40-50kg
- Comprehensive Error: 0.05mv/v
- Output Sensitivity: 1.0 0.1mv/v
- Nonlinearity: 0.03%FS
- Repeatability: 0.03%FS
- Hysteresis: 0.03%FS
- Creep: 0.03 (3min)%FS
- Zero Drift: 0.03(1min)%FS
- Temp. Effect on Zero: 10 1Zero %FS/
- Temp. Effect on Output: 0.05%FS/10
- Zero Output: 0.1mV/V
- Input Resistance: 1000 20
- Output Resistance: 1000 20
- Insulation Resistance: 5000M
- Excitation Voltage: 10V
- Operation Temp. Range: 0+50
- Overload Capacity: 150%FS
-
- Rated Load: 10Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
- Output Impedance: 1000±10% Ω
- Maximum working voltage: 15V DC
- Operating temperature range: -20~60°C
- Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L X W X H)
-
The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. A Logic Level Converter is very easy to connect and use since it doesn’t need any programming, all you have to do is connect the 5V wire on one side and the 3.3V on the other.
-
MAX30100 Pulse Oximeter Heart Rate Sensor
Original price was: ₨550.00.₨359.00Current price is: ₨359.00. Quick View- 1.8V – 5.5V is its operating voltage.
- I2C is Its interface type.
- 18.8 x 14.4 3 mm is the dimensions of the Heart sensor module.
- Heart Sensor weight is 1.2g.
- The heart sensor module brand is MAX30100.
- The Digital is its Output type.
- The working principle of this sensor is the Biosensor.
- This is a pressure-sensitive and force-sensitive sensor.
- The polymer is its material texture.
-
MAX31865 RTD PT100 Amplifier
Original price was: ₨2,700.00.₨1,599.00Current price is: ₨1,599.00. Quick View- Advantage: Handling all of your RTD needs.
- Strong point: Compensating 3 or 4-wire RTDs for better accuracy.
- Characteristic: Could be used with any Arduino or microcontroller.
- Feature: 3.3V regulator and level shifting.
- Feature: Could be used with any 2, 3, or 4-wire PT100 RTD.
-
MAX6675 Module + K Type Thermocouple
Original price was: ₨1,500.00.₨719.00Current price is: ₨719.00. Quick View- Thermocouple temperature range: 0 to 450 °C
- Module sensor temperature range (°C): 0 to 1024
- Temperature resolution (°C): 0.25
- Module supply voltage: 3 to 5.5 V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible
- Termocouple accuracy (0-700°C): 8 LSBs
- Termocouple disconnect detection
-
MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit
Original price was: ₨2,000.00.₨1,299.00Current price is: ₨1,299.00. Quick View- MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
- A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
- The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
- It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
-
Microphone Amplifier – MAX9814 w/ Auto Gain Control
Original price was: ₨800.00.₨449.00Current price is: ₨449.00. Quick View- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
-
Microphone Sound Sensor Module
Original price was: ₨199.00.₨149.00Current price is: ₨149.00. Quick ViewThis module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent low. It has working voltage of 3.3-5V.
-
Mini Piezo Buzzer Mini PCB Mount
Original price was: ₨50.00.₨39.00Current price is: ₨39.00. Quick View- Operation Voltage: 3-5V DC
- Current: <25mA
- SPL: 85dBA/10cm
- Frequency: 2,300Hz
- Color: Black
- Operating Temperature: – 20C to +65C
- Weight: 2.4 gram
- Size: 1.2cm diameter x 1cm tall (0.47″ x 0.39″)
- Pin Spacing: 7.6mm
-
This motor driver expansion board is based on the L293D chip which is designed to drive up to 4 bidirectional DC motors with individual 8-bit speed selection. It can also drive 2 stepper motors (unipolar or bipolar), single coil or double coil, interleaved or micro-stepping. It contains 4 H-bridges which provide up to 0.6 A per bridge (1.2A peak) at voltages from 4.5 V to 36 V. This shield has pull down resistors to keep the motors disabled during power up. It also features a 2-pin terminal block to ensure separate logic and motor external power supplies. This expansion board is compatible with Arduinos Mega, Diecimila, and Duemilanove. This motor driver shield is capable of driving:Four DC motors and two servos, Two DC motors, stepper motor, and two-way servo, Two stepper motors and servos.
-
MPU9250 IMU 9DOF MPU-9250
Original price was: ₨2,000.00.₨1,650.00Current price is: ₨1,650.00. Quick View- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
- Accelerometer full-scale range of 2g, 4g, 8g, and 16g
- Magnetometer full-scale range of 4800T
- I2C and SPI serial interfaces
- Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
- Power supply: 3-5v
-
MQ-4 Methane/ Natural Gas Sensor Module for Arduino
Original price was: ₨549.00.₨329.00Current price is: ₨329.00. Quick View- Model : MQ4 Gas Sensor Module
- IC Chip: LM393
- Operating Voltage: 3 ~ 5V (DC)
- Detecting Range: 300ppm to 10000ppm
- Dimensions: 3.1 x 1.9 x 2.1 cms
- Weight: 5 grams
-
MQ-5 METHANE GAS SENSOR MODULE
Original price was: ₨450.00.₨319.00Current price is: ₨319.00. Quick View- Indication of the signal output.
- Dual signal output (analog output, and TTL level output)
- TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage.
- Liquefied petroleum gas, natural gas, city gas, better sensitivity.
- Has a long life and reliable stability
- Fast response and recovery characteristics
- Operating voltage: DC 5 V
-
MQ135 Air Quality Detector Sensor Module
Original price was: ₨540.00.₨389.00Current price is: ₨389.00. Quick View- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
-
MQ2 Gas Sensor Detector Module
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Its dimensions are 36 x 20 x 21 (LxWxH)
- Its weight is 8gm.
- Its operating voltages are plus 5V.
- It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.
- Its analog output voltages are 0V to 5V.
- Its digital output voltages are 0 to 5V.
- Its preheat duration is 20 seconds.
- This sensor can be used as a digital or analog sensor.
- Its sensitivity can be varied by the potentiometer.
-
MQ2 MQ-2 SMOKE SENSOR MODULE
Original price was: ₨350.00.₨289.00Current price is: ₨289.00. Quick View- Operating voltage: 5V
- Analog output voltage: 0V to 5V
- Digital output voltage: 0V or 5V (TTL Logic)
- Preheat duration: 20 seconds
- Sensitivity range: 200 to 10,000 ppm
- Gases detected: LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide
- Dimensions: 3.6 x 2 x 1 cms
- Weight: 5 grams
-
- Model No.: MQ-3
- Dimensions: 36 x 20 x 21 mm (LxWxH)
- Weight: 6gm
- Heater voltage: 50.2V (AC DC)
- Loop voltage: 24V (DC)
- Load resistance: adjustable
- Heating Resistance: 31 3 (Room temperature)
- Heating Power: 900mW
- Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)
- Sensitivity: Rs (in air)/Rs (0.4mg/L alcohol) 5
- Working temperature: 20 degrees 2 degree
- Humidity: 65% 5%RH
- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
- Has a long service life and reliable stability.
- Rapid response recovery features.
-
MQ7 MQ-7 Gas Sensor Detection Module
Original price was: ₨450.00.₨399.00Current price is: ₨399.00. Quick View- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
-
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter
Original price was: ₨160.00.₨109.00Current price is: ₨109.00. Quick View- Input Voltage: 2-24V DC
- Output Voltage: 5-28V DC
- Maximum Output Current: 2A
- Switching Frequency: 1.2Mhz
- Output Ripple: <100mV
- Module Size: 37.2mm x 17.2mm x 14.0mm
- About 93% Efficiency
- Features like an under-voltage lockout, thermal overload protection
-
MX-350 MAX Solar DC Water Pump
Original price was: ₨780.00.₨499.00Current price is: ₨499.00. Quick View- Completely Submersible Motor.
- Extremely Quite Operations.
- Suction Cups To Fit Any Water Tank.
- Long Lasting Water Proof Ceramic Shaft.
- Suitable For Fresh And Sea Water Appliances.
-
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
Original price was: ₨1,099.00.₨669.00Current price is: ₨669.00. Quick View- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
-
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board
Original price was: ₨1,500.00.₨1,049.00Current price is: ₨1,049.00. Quick View- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
-
NRF24L01 2.4GHz Wireless Transceiver Module
Original price was: ₨650.00.₨249.00Current price is: ₨249.00. Quick View- Worldwide 2.4GHz ISM band operation Free license to use.
- 126 RF channels.
- High air data rate: 250kbps, 1 and 2Mbps.
- Transmitter: 11.3mA at 0dBm output power.
- Receiver: Fast AGC for improved dynamic range.
- Receiver: Integrated channel filters.
- Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
- Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
- Low Power Management:1.9 to 3.6V supply range.
- GFSK modulation.
- Auto packet transaction handling.
- Easy to design.
- Small size:15mm*29mm.
-
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
-
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
Original price was: ₨350.00.₨139.00Current price is: ₨139.00. Quick View- Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
-
NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR
Original price was: ₨45.00.₨29.00Current price is: ₨29.00. Quick View- Standard Type
- Linear Response Curve
- Temperature Range: -55C to +125C
- Rated Power: 0.5W
- RoHS Compliant
- Resistance: 10K ohm
- Resistance Tolerance: +/- 5 %
- B Constant: 3435K
- B Constant Tolerance: +/- 1 %
- B Constant Class: B25/50
- Temperature Range: -30 to +125 degree C
- Thermistor Type: NTC Thermistor
-
OLED Display Module 12864 0.96 Inch 4Pin
Original price was: ₨600.00.₨549.00Current price is: ₨549.00. Quick View- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
-
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
Original price was: ₨6,580.00.₨3,400.00Current price is: ₨3,400.00. Quick View- IP67 rated PBT housing with methacrylate lens
- PNP and NPN output configurations
- Light ON/dark ON selectable
- Small dead-band for sensing close targets
- Retro-reflective versions have a polarised light source for shiny object detection
- Short circuit and reverse polarity protection
- Mutual interference protection (retro and diffuse versions only)
- Operating temperature range -25 °C → +55°C
-
- L14G3
- PHOTO TRANSISTOR
- PACKAGE/CASE:3-TO-18
- LEADED PROCESS COMPATIBLE: NO
- PEAK REFLOW COMPATIBLE (260 C): NO
- CURRENT RATING:2MA
- MOUNTING TYPE: THROUGH HOL
-
Outdoor 12V Infrared PIR Motion Sensor Switch
Original price was: ₨1,800.00.₨899.00Current price is: ₨899.00. Quick View-
Detection range : 180
-
Operating voltage : 12V
-
Detection distance : 15m (24) (adjustable)
-
Delay Time : 15 seconds to 7 minutes (adjustable)
-
Installation height :1.8m 2.5m
-
Material : ABS
-
Dimensions : 60 x 47 x 156mm
-
Installation : open type, (hole 16mm) installation, adjusting for the next button
-
-
Pack of 5 27mm Piezo Electric Plate
Original price was: ₨400.00.₨330.00Current price is: ₨330.00. Quick View- Product type: Piezoelectric Transducer Piezo Sensor
- Colour: copper and silver
- Dimension: 27 mm
- Weight: 2 g
- Sheet material: bronze
- Package contains: 1 x piezoelectric sensor
-
Ph Sensor Gravity Sensor Module
Original price was: ₨7,800.00.₨5,999.00Current price is: ₨5,999.00. Quick View- Module Power: 5.00V
- Module Size : 43 x 32mm(1.69×1.26″)
- Measuring Range :0 – 14PH
- Measuring Temperature: 0 – 60 ℃
- Accuracy : ± 0.1pH (25 ℃)
- Response Time: ≤ 1min
- pH Sensor with BNC Connector
- pH2.0 Interface ( 3 foot patch )
- Gain Adjustment Potentiometer
- Power Indicator LED
-
Photoelectric Sensor G183A10 NA
Original price was: ₨1,800.00.₨1,440.00Current price is: ₨1,440.00. Quick ViewPhotoelectric sensors are electronic devices capable of detecting the approximation, passage and presence of metallic materials or not, through emission and reception of infrared light provided they are located within the distance of actuation of the sensor. The detection of the photoelectric sensor occurs without physical contact between the sensor and the trigger because it has no moving parts subject to mechanical wear and thus increase the life of the equipment. The Photoelectric Sensor price base on the three operating principles Diffuse, Retroreflective, Barrier. Photoelectric sensor price model G18 with plastic housing has tubular shape with 18mm diameter (M18) with cable type or connector depending on type (diffuse, reflective or barrier) has sensing distances of 10, 30 cm, 2 and 5 m. Photoelectric sensor price has electrical configuration type NPN or PNP contacts normally open (NA), normally closed (NF) or (NA + NF) and connection with 2 or 4 pins.
-
Piezo Pack of 5 Large Pickups 45mm
Original price was: ₨500.00.₨430.00Current price is: ₨430.00. Quick ViewPiezo Pack of 5 Large Pickups 45mm Attach the round disc to the object that will be knocked on such as a door and measure the voltage across the two wires. Piezo elements can also produce sound when a voltage is applied across them. They convert between electricity and vibration in both ways; Vibration applied at the round end can be detected as a voltage across the wire leads and inversely, the voltage applied across the wire leads causes the round end to vibrate.
-
Piezoelectric Shock Tap Sensor Vibration Switch Module
Original price was: ₨899.00.₨715.00Current price is: ₨715.00. Quick View- Item Name: Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Type: Vibration Switch Sensor Module
- Working Voltage: 5.0V (DC)
- Interface Type: AD/DO
- AO: Analog Signal Output
- DO: TTL Level Output
- Working Temperature: -10 C ~ +70 C
- Size: Approx. 20 x 20mm / 0.8 x 0.8in
- Weight: 4.5 g / 0.2 oz(approx.)
- Test Method and Wiring:
- G (GND):: Power ground
- V (VCC): Operating voltage 5V (DC)
- ADO: Analog signal output
- According to the vibration intension, the higher the output voltage, the higher the vibration amplitude sensitivity can be adjusted by the potentiometer (the left turn sensitivity is low, the right turn sensitivity is high). The high sensitivity output can be adjusted to respond with a mouth blow or a tap with a hand.
- DO: TTL level output. Output signal LED indication. TTL output valid signal is high level, output control power
-
PIR Sensor Detector Smart Switch 220V
Original price was: ₨1,200.00.₨989.00Current price is: ₨989.00. Quick View- Working Voltage: AC 85-265V
- Sensing angle: 180 degree
- Sensing distance: Max 12m (25℃) (Adjustable)
- Sensor delay: 5s – 6min (Adjustable)
- LUX Setting: 2 – 2000LUX (Adjustable)
- Material: ABS
- IP rating: IP65
- Installation Height: 1.8m – 2.5m
- Lifespan: 50,000 hours
- Working temperature: –10℃ ~ +40℃
- Working humidity: less than 93% RH
- Item size: 15.6 * 6.0 * 4.7cm / 6.1 * 2.4 * 1.9in (L * W * H)
- Item weight: 118g / 4.2oz
- Package size: 20 * 14 * 4.7cm / 7.9 * 5.5 * 1.9in (L * W * H)
- Package weight: 128g / 4.5oz
-
PPM encoder is the role of the receiver output of multiple channel PWM signal encoded into PPM composite signal output, single-wire connection to support the flight control.
-
PR08-2DP Inductive Proximity Sensor
Original price was: ₨999.00.₨769.00Current price is: ₨769.00. Quick View- Wire type and power
- DC 3-wire type 12-24VDC Sensing side diameter
- M08Sensing distance 2mm
- Installation Non-shield(non-flush)
- Standard sensing target8x8x1mm(iron)
- Response frequency1kHzCurrent specification
- Current consumption: Max. 10mA
- Control output PNP Normally Open Material Brass(nickel plated)
- Cable Standard/material Standard cable
- Protection structureIP67
- Approval Body length Standard type
- Environment Ambient temperature-25 to 70C, storage: -30 to 80C
- Environment Ambient humidity35 to 95% RH, storage: 35 to 95% RH
- Hysteresis(distance)Max. 10% of sensing distance
- Residual voltage Max. 2V
- Weight Approx. 64g(approx. 52g)
-
PR12 2DN Autonics Proximity Sensor
Original price was: ₨1,566.00.₨999.00Current price is: ₨999.00. Quick View- Improved the noise resistance with a dedicated IC.
- Built-in reverse polarity protection circuit (DC 3-wire type).
- The built-in surge protection circuit.
- Built-in overcurrent protection circuit (DC type).
- Long life cycle and high reliability, and simple operation.
- IP67 protection structure (IEC standard).
- Replaceable for micro switches and limit switches.
-
PR12 4DN Autonics Proximity Sensor
Original price was: ₨999.00.₨769.00Current price is: ₨769.00. Quick ViewPR12 4DN Autonics PR12-4DN Inductive Proximity Sensor – 4mm is the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness, and type of metal being detected and will in general be between 70 to 80% of the standard distance.
-
PR12 4DP Proximity sensor Autonics
Original price was: ₨999.00.₨799.00Current price is: ₨799.00. Quick ViewSensing distance
1.5mmInstallation
Shield(flush)Standard sensing target
8×8×1mm(iron)Response frequency
1.5kHzCurrent specification
Current consumption: Max. 10mAControl output
PNP Normally OpenMaterial
Brass(nickel plated)Cable Standard/material
Standard cableBody length
Standard typeWeight
Approx. 64g (approx. 52g) -
Pressure Sensor MPX5700AP
Original price was: ₨9,000.00.₨5,499.00Current price is: ₨5,499.00. Quick View- On-chip signal conditioned, temperature compensated and calibrated
- 2.5% maximum error over 0°C to 85°C
- Ideally suited for microprocessor or microcontroller-based systems
- Patented silicon shear stress-strain gauge
- Pressure ranges from 15KPa to 700KPa
- Supply voltage ranges from 4.75VDC to 5.25VDC
- Sensitivity of 6.4mV/KPa
- Response time of 1ms
- Durable epoxy unibody element
- Operating temperature ranges from -40°C to 125°C
-
Proximity Sensor LM12 3002 NA
Original price was: ₨1,250.00.₨999.00Current price is: ₨999.00. Quick ViewProximity Sensor LM12 3002 NA switch is composed of three parts: oscillator, switch circuit and magnified output circuit. The oscillator will generate an alternating electric field. When hemetal object approaches this electric field and reaches the induction distance, whirlpool will generate in metal object, resulting in attenuation of vibration and then stop. The change of vibration and stop of oscillator is treated by begird stage magnified circuit and converted to switching sign, triggering driving con-contact detection.
-
Proximity Sensor LM12-3004-PA PNP
Original price was: ₨1,140.00.₨899.00Current price is: ₨899.00. Quick View- Insulating resistance: ≥ 50 M Ω
- Gearing distance: from 2 mm to 7 mm
- Precision of repetition: 0.01
- Ambient temperature: -25˚С to +65˚С
- Gearing speed: 5mm/s
- Rated voltage: 6~36VDC; 90~230VAC
- IP code: IP 67
-
Proximity Sensor LM8 1.5 DN
Original price was: ₨1,099.00.₨999.00Current price is: ₨999.00. Quick View- Improve the noise resistance by adopting a dedicated
- The built-in protection circuit of reverse power polarity (DC 3-wire type)
- Built-in surge protection circuit
- Built-in over current protection circuit (DC type)
- Custom Applications Available Please Call For Applications.
-
Pulse Sensor Heart Rate Sensor
Original price was: ₨450.00.₨429.00Current price is: ₨429.00. Quick View- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
- Inbuilt Amplification and Noise cancellation circuit.
- Diameter: 0.625
- Thickness: 0.125 Thick
-
PWM 40A DC Motor Speed Controller Module
Original price was: ₨3,200.00.₨1,499.00Current price is: ₨1,499.00. Quick ViewThis 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET connected to the individual heatsinks.Features: DC Motor Speed Controller Module with PWM 40 A
- Industrial Quality Board.
- Maximum Output Current of 40A.
- Maximum Output Power of 2000W
- Working Voltage From 9V to 50V.
-
PWM controller DC Motor speed controller 12V-40V 10A
Original price was: ₨1,039.00.₨639.00Current price is: ₨639.00. Quick View- Input Voltage: DC 12V-40V
- Control Power: 0.01-400W
- Rated Current: 8A
- Maximum Current: 10A
- Static Current: 0.02A(standby status)
- Frequency: 13kHz
- Speed Adjustment Range: 10%-100%
- Hole Diameter: 3.2mm
- Operating Temperature: -20C~125C
- Dimensions: 75*60*28mm / 2.95*2.36*1.10in
- Package Weight: Approx. 73g/2.6oz
-
PWM DC Motor Speed Controller 8A With Display
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. Quick View- Suitable for motors with voltage: 12 and 24V
- The total range of permissible tension: 6V to 30V DC
- Output current: Rated current 5A (8A max short term)
- PWM frequency: 16 kHz
- Adjustable PWM duty cycle : 0% -100%
- LED Digital display showing the duty cycle
- The dimensions of the regulator are 7.8 x 4.2 x 2.5 cm
-
PZEM-004T AC Voltage-Current Sensor with Open and Close Type Current Transformer
Original price was: ₨4,046.00.₨2,899.00Current price is: ₨2,899.00. Quick View- Working Voltage: 80~260VAC
- Test Voltage: 80~260VAC
- Rated power: 100A / 22000W
- Working Frequency: 45-65Hz
- Measurement accuracy: ±1.0%
- Board size: 18.5 × 3 × 2.2 cm / 2.87 × 1.18 × 0.9″
-
PZEM-004T Current Voltage Multimeter Module AC 80-260V 100A with Current Transformer
Original price was: ₨4,046.00.₨2,200.00Current price is: ₨2,200.00. Quick View- Working Voltage: 80~260VAC
- Test Voltage: 80~260VAC
- Rated power: 100A / 22000W
- Working Frequency: 45-65Hz
- Measurement accuracy: ±1.0%
- Board size: 18.5 × 3 × 2.2 cm / 2.87 × 1.18 × 0.9″
-
PZEM-022 CT 100A AC Digital Display Power Monitor Meter
Original price was: ₨4,500.00.₨2,999.00Current price is: ₨2,999.00. Quick View-
Operating Voltage: 80–260V AC
-
Measurement Current Range: 0.02–100A
-
Power Range: 0.5W–22,000W
-
Energy Range: 0–999kWh
-
Frequency Range: 45–65Hz
-
Power Factor Range: 0.00–1.00
-
Measurement Accuracy: Class 1.0
-
Nominal Power: 100A / 22000W
-
-
PZEM-022 Open and Close CT 100A AC Digital Display Power Monitor Meter
Original price was: ₨5,000.00.₨3,999.00Current price is: ₨3,999.00. Quick View-
Operating Voltage: 80–260V AC
-
Measurement Current Range: 0.02–100A
-
Power Range: 0.5W–22,000W
-
Energy Range: 0–999kWh
-
Frequency Range: 45–65Hz
-
Power Factor Range: 0.00–1.00
-
Measurement Accuracy: Class 1.0
-
Nominal Power: 100A / 22000W
-
-
PZEM-051 DC Digital Multi-Function Meter
Original price was: ₨6,000.00.₨4,499.00Current price is: ₨4,499.00. Quick View- Brand: PEACE FAIR
- Model: PZEM-051
- Optional Pattern: 50A Current Shunt, 100A Current Shunt
- Working voltage: 6.5-100V DC
- Voltage test range: 6.5-100V DC
- Rated power: 100A / 10000W
- Measurement Accuracy: 1.0
- Weight: Approx. 137g
-
QTR-8A Reflectance Sensor Array
Original price was: ₨1,039.00.₨549.00Current price is: ₨549.00. Quick ViewThis sensor module has 8 IR LED/phototransistor pairs mounted, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.
-
R305 fingerprint sensor
Original price was: ₨2,930.00.₨2,399.00Current price is: ₨2,399.00. Quick View- Peak Current: 150mA
- Matching Mode: 1:1 and 1:N
- Baud rate (9600*N)bps, N=1-12 (default N=6 57600bps)
- Character file size: 256 bytes
- Image acquiring time: <0.5s
- Template size: 512 bytes
- Storage capacity: 120
- Security level: 5 (1, 2, 3, 4, 5(highest))
- FAR: <0.001%
- FRR: <0.1%
- Average searching time: < 0.8s (1:880)
- Storage environment Temp: -40℃- +85℃
- RH: 40%-85% RH: <85%
-
R307 Finger Print Sensor (R-307)
Original price was: ₨4,000.00.₨3,499.00Current price is: ₨3,499.00. Quick View- Supply voltage: DC 4.2 ~ 6.0V
- Working current: 50mA (typical)
- Peak current: 80mA
- Fingerprint image input time: <0.3 seconds
- Window area: 14×18 mm
- Comparison method: (1: 1)
- Search method: (1: N)
- Characteristic file: 256 bytes
- Template file: 512 bytes
- Storage capacity: 1000 pieces
- Security Level: Five (from low to high: 1,2,3,4,5)
- Fake rate (FAR): <0.001%
- Refusal rate (FRR): <1.0%
- Search time: <1.0 seconds (1: 1000 hours, mean value)
- Host interface: UART, USB1.1
- Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
- Working environment: Temperature: -20 ℃ – +40 ℃
- Relative humidity: 40% RH-85% RH (no condensation)
- Overall Size: 4.5×2.4x2cm
-
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
- 3.2 cm x 1.4 cm x 1.0 cm
-
- Supply Voltage : 12 V
- Fused at 5A for additional safety and component protection
- Heated bed control with additional 11A fuse
- Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
- I2C and SPI pins left available for future expansion.
- 2 stepper motor for Z axis in parallel.
-
RC522 RFID Reader Module 13.56MHz
Original price was: ₨590.00.₨249.00Current price is: ₨249.00. Quick View- Module Name: MF522-ED
- Working current 13 26mA/ DC 3.3V
- Standby current 10-13mA/DC 3.3V
- sleeping current <80uA
- peak current <30mA
- Working frequency 13.56MHz
- Card reading distance 0 60mm mifare1 card
- Protocol SPI
- data communication speed Maximum 10Mbit/s
- Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
- Dimension 40mm 60mm
- Environment
- Working temperature -20 80 degree
- Storage temperature -40 85 degree
- Humidity relevant humidity 5% 95%
- Max SPI speed: 10Mbit/s
-
- Output controllable: Digital
- Compatible: With any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage: 250VAC/30VDC
- Max. switching current: 10A
- Size: 76mm x 56mm x 17mm
-
RF 315/433 Transmitter/Receiver Module
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick ViewTransmitter :
- Working voltage: 3V – 12V for max. power use 12V
- Working current: max Less than 40mA max, and min 9mA
- Resonance mode: (SAW)
- Modulation mode: ASK
- Working frequency: Eve 315MHz Or 433MHz
- Transmission power: 25mW (315MHz at 12V)
- Frequency error: +150kHz (max)
- Velocity: less than 10Kbps
So this module will transmit up to 90m in open area.
Receiver :
- Working voltage: 5.0VDC +0.5V
- Working current: 5.5mA max
- Working method: OOK/ASK
- Working frequency: 315MHz-433.92MHz
- Bandwidth: 2MHz
- Sensitivity: excel 100dBm (50)
- Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)
-
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC,parity,bit coding bit counting
- Anticollision
- Typical tickting transaction: <100 ms ( including backup management)
-
- Operating frequency: 125 kHz
- Baud rate: 9600
- Interface: TTL level RS232 format
- Working voltage: DC 5V
- Working current: <50mA
- Receive distance: 20~50mm
- Dimension (mm): 38.5 x 20
- Weight: 7g
-
- Material: FR4
- Length: 25mm
- Width: 11mm
- Height: 16mm
- Weight: 1.59g
- Operating Voltage: 5v DC
-
This is the SMD RGB LED Common Cathode Module, These module has 3 separate LEDs the Red, Green and Blue which can be individually driven by applying a voltage to the appropriate module pin this example code is uses the Arduino analogWrite(PWM) function to cycle through the full possible output colors this smd led module is capable of producing a rainbow color scheme.
-
- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
-
RPM Measurement Sensor Rotational Speed Measuring Module
Original price was: ₨160.00.₨119.00Current price is: ₨119.00. Quick View- Input voltage: 3.3V to 5V
- Output signal: TTL signal, active low
- Pulse frequency range: 0 to 100Hz
- RPM range: 0 to 6000RPM
- Dimensions: 32 x 14 x 7mm
- Weight: 5g
-
- Core Material: Ferrite
- External Material : ABS
- Input Current : 30A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
-
SCT-013-000 Non-invasive AC Current Clamp Sensor 20A
Original price was: ₨1,500.00.₨1,250.00Current price is: ₨1,250.00. Quick ViewAC Current Signal Conversion Module
- Input Voltage (VCC): 3.3V-5.5V
- Interface: Gravity Analog (PH2.0-3P,analog voltage output 0.2-2.8V DC)
- AC Voltage Input Range: 0-1V (AC RMS)
- Relative Error: +/- 4%
- Dimension: 32×27 mm
- Weight: 5g
Open Type AC Transformer Probe
- AC Current Range: 0-20A
- Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
- Accuracy: ±1%
- Non-linearity: ≤±0.2%
- Frequency Range: 50Hz~1kHz
- Cable Length: 1m
- Working Temperature: -25 ℃~+70 ℃
- Opening Size: 13×13 mm / 0.51×0.51 in
- Weight: 50g
-
SCT013-000 CT 100A Non-invasive AC Current Sensor
Original price was: ₨1,800.00.₨1,249.00Current price is: ₨1,249.00. Quick View- Core Material: Ferrite
- External Material : ABS
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
-
This is simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24″ Long.
-
The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption
-
SIM800L GSM Module Micro Sim Card Board
Original price was: ₨1,799.00.₨1,049.00Current price is: ₨1,049.00. Quick View- Module models: SIM800L (latest module, performance than SIM900)
- Operating voltage: 3.7 to 4.2 V (peak current is 2A)
- Support network: China mobile, China Unicom
- Module size: 2.2 x 1.8cm
- TTL serial port can directly link to MCU. Don’t need a MAX232
- Power on automatic startup, automatic search network
- Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
-
Single Lead Heart Rate Monitor ECG – AD8232
Original price was: ₨2,750.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Operating Voltage – 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
- LED Indicator
- 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
-
- Very low supply current
- Photodetector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against EMI
- Supply voltage: 2.5 V to 5.5 V
- Improved immunity against ambient light
- Insensitive to supply voltage ripple and noise
-
Soil Moisture Sensor For Arduino
Original price was: ₨350.00.₨179.00Current price is: ₨179.00. Quick View- Easy-to-use
- 3-pin screw pin terminal is pre-soldered to the board
- PCB coated in gold finishing
- 3.3V to 5V operating supply voltage range
-
Solar water pump or air cooler pump DC 12V 8watt, Shafi
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick ViewThis awesome water pump comes with an adjustable flow and is easy to clean. Strainer protects impeller from damage. Shell is made of high-quality ABS plastic. This pump is a totally submersible flow-adjustable water pump. The motor will automatically cut off the power if it is overheating. The flow can be up to 212GPH. It has good waterproof, has high dielectric strength, and is safe and reliable. Suitable for acid, alkali, and salt environments.
-
SPO2 MAX30102 Blood Oxygen Concentration Sensor
Original price was: ₨1,200.00.₨499.00Current price is: ₨499.00. Quick View- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Free Algorithm
- Highly integrated, small-size sensor
- Non-chest based heart-rate/SpO2 detection
- Ultra-low power consumption
-
SW-520D – Tilt Sensor Module
Original price was: ₨220.00.₨149.00Current price is: ₨149.00. Quick View- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator, clean signal, good waveform, strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
-
- Working voltage: DC 3.3V-5V
- Working current: 20mA
- Operating temperature: -10~+50
- detection distance :2-40cm
- IO Interface: 4-wire interfaces (-/+/S/EN)
- Output signal: TTL level (low level there is an obstacle, no obstacle high)
- Adjustment: adjust multi-turn resistance 8. Effective angle: 35.7.
- Size: 28mmx23mm
-
- Imported chips TCS3200 PCB board with gold plating.
- TCS3200 is TCS230 upgrade version, the better.
- Power supply: 3-5v
- Anti-light interference.
- White LED, can control the on and off.
- Can detect non-luminous object color.
- PCB dimensions: (L) 33mm * (W) 25mm
-
The Radio telemetry system base on 3DR Radio system and 100% compatible.
It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. Its available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).
The system provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.
Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.
-
Telko S063 Portable Door Wedge Guard
Original price was: ₨788.00.₨499.00Current price is: ₨499.00. Quick View- High output: 120DB alarm siren
- Standard 9 volt battery operation
- Required no special installation
- Rugged high impact ABS construction
- Provide alarm siren operation from contact with door or from movement vibration.
-
Temperature Sensor Module DS18B20
Original price was: ₨290.00.₨279.00Current price is: ₨279.00. Quick View- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55C to +125C, be accurate to 0.5C.
-
An NTC is commonly used as a temperature sensor, or in parallel with a circuit as an inrush current limiter.
-
TSOP 1738 Sensor IR Receiver Plastic (SM0038)
Original price was: ₨90.00.₨59.00Current price is: ₨59.00. Quick View- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length 10 cycles/burst
-
TTP223B Blue Touch Sensor 1-Ch-Capacitive Touch Sensor
Original price was: ₨250.00.₨95.00Current price is: ₨95.00. Quick View- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
- Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
- Response time (low power mode) : 220 mS
- Size : 24 x 24 x 7.2 mm
-
- Operating voltage: 2.0V to 5.5V
- Operating current: 1.5uA to 3.0uA
- Response time: 100ms to 220ms
- Sensitivity adjustment range: 0pF to 50pF
- Dimensions: 5mm x 5mm x 1.5mm
-
TTP224 4 Way Capacitive Touch Switch
Original price was: ₨599.00.₨199.00Current price is: ₨199.00. Quick View- Onboard TTP224 capacitive touch sensor IC 4 keys.
- 4 board-level status indicators.
- Input Operating voltage: DC 2.0V – 5.5V
- The module can set the output mode, the key output mode, the maximum output time, and fast/low power selection.
- Input with reverse polarity protection.
- LED Color: connected to Output pin
- Idle current: <10uA
-
UGN3503 AH3503 Hall Effect Sensor
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick View- Extremely Sensitive
- Flat Response to 23 kHz
- Low-Noise Output
- 4.5 V to 6 V Operation
-
- Power Supply : 5V DC
- Quiescent Current : <2mA
- Working Currnt: 15mA
- Effectual Angle: <15
- Ranging Distance : 2cm 400 cm/1x13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
-
- Seamless Integration with other components
- Made of superior grade material for long life
- Designed to contribute in the overall performance of the equipment
- Lightweight and durable, easy to match the ultrasonic sensor
-
UNO R3 WiFI Development Board ATmega328P
Original price was: ₨2,100.00.₨1,699.00Current price is: ₨1,699.00. Quick View- Arduino UNO R3 board integrated with esp8266 module
- Program both UNO and esp8266 separately using dip switch
- UNO and esp8266 can communicate each other via serial by adjusting dip switch
- Supply Voltage: 6~9V recommend
- USB-converter: CH340G. Need to install driver software to program
- PinOut UNO: UNO R3
- Digital I/O Pins: 14
- Analog I/O Pins: 6
- Logic Level: 5V
- Operating temperature: −40С°/+125С°
- MCU: ATmega328
- WiFi MCU: ESP8266
- UNO+WiFi R3 ATmega328P+ESP8266 (4Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266
-
USB Security Tester LCD Display
Original price was: ₨1,000.00.₨699.00Current price is: ₨699.00. Quick ViewUSB tester is a unique product which can be used to test the voltage and current levels of a system or a USB based circuit.
-
USB Type-B Connector Breakout Board
Original price was: ₨130.00.₨99.00Current price is: ₨99.00. Quick View- Effective this breakout board has a USB Type B female connector, with all 4 pins broken out to a DIP 2.54mm header.
- Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
- USB 2.0 Type B Female
- 2.54mm Pitch
- DIP4
- color: green
- Material: plastic
- size:20*20*1mm
- Package Contents:
- 2 * USB to DIP adapter board
- Only the above package content, other products are not included.
-
- Form A Switch,1 Watt max.
- 24v DC switching voltage max.
- 0.1A switching current max.
- 150v DC breakdown voltage min.
- 7/0.2mm PVC insulated cable
- 7/0.2mm PTFE insulated cable on Acetal switch
-
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
-
Voice Recognition Module
Original price was: ₨5,600.00.₨4,799.00Current price is: ₨4,799.00. Quick View- Voltage: 4.5-5.5V
- Current: <40mA
- Digital Interface: 5V TTL level for UART interface and GPIO
- Analog Interface: 3.5mm mono-channel microphone connector
and microphone pin interface - Size: 31mm x 50mm
- Recognition accuracy: 99% (under ideal environment)
-
W5100 Ethernet Shield
Original price was: ₨3,500.00.₨2,999.00Current price is: ₨2,999.00. Quick View- Operating voltage 5V (supplied from the Arduino Board)
- Ethernet Controller: W5100 with internal 16K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
- The Shield contains a number of informational LEDs
- PWR: indicates that the board and shield are powered
- LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
- FULLD: indicates that the network connection is full duplex
- 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
- RX: flashes when the shield receives data
- TX: flashes when the shield sends data
- TX: flashes when the shield sends data
- COLL: flashes when network collisions are detected
-
W5500 Ethernet Network Module / Shield
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. Quick View- Operating voltage: 2.97-3.63V
- Current draw: Typical: 128mA, Max: 200mA
- SPI clock frequency: Max: 80MHz
- Ethernet MAC: 10/100BASE-T
- PHY: 10BASE-T and 100BASE-T
- TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
- Hardware sockets: 8
- Internal buffer: 32KB
- Supports: SPI, WOL, and power down mode
-
Water Level Sensor in Pakistan
Original price was: ₨250.00.₨109.00Current price is: ₨109.00. Quick View-
Operating voltage: DC3-5V
-
Operating current: less than 20mA
-
Sensor Type: Analog
-
Detection Area: 40mmx16mm
-
Production process: FR4 double-sided HASL
-
Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
-
Dimensions: 60mmx20mm
-
-
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
-
- Its color is White.
- Alarms diameter is 29mm / 1.14”
- Electronic buzzer height is 15mm / 0.59”
- It has 2 mounting holes. And the distance of the holes is 40mm / 1.57”
- Its rated voltages are 12Volts.
- Its operating voltages are 3 to 24 voltages.
- Its rated current is 20mA.
- Its min sound output at 10cm is 95 Db.
- Its resonant frequency is 3100 to +- 500.
- Its operating temperature is -20 to -80 degrees centigrade.
- It has intermittent sound and mounting holes.
- It has good storage and it allows you to use it for a long time.
-
XBee 1mW Wire Antenna
Original price was: ₨6,500.00.₨4,549.00Current price is: ₨4,549.00. Quick ViewINTRODUCTION
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek! -
XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
Original price was: ₨6,000.00.₨4,999.00Current price is: ₨4,999.00. Quick ViewThis is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way. -
XBee 2mW Wire Antenna – Series 2 (ZB)
Original price was: ₨15,000.00.₨8,799.00Current price is: ₨8,799.00. Quick ViewThis is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
-
XBee Pro 60mW PCB Antenna – Series 1
Original price was: ₨7,500.00.₨5,999.00Current price is: ₨5,999.00. Quick ViewThis is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
-
INTRODUCTION
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. -
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
-
This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
-
XH-M452 Digital Temperature Humidity Controller DC 12v
Original price was: ₨3,500.00.₨1,149.00Current price is: ₨1,149.00. Quick View- Supports heating mode and cooling mode.
- High precision 0.1 Celsius and 0.1% RH.
- Real-time display of temperature and humidity.
- Custom load, arbitrarily selected.
- Simple setting.
- Easy installation.
- Power-down memory function.
- Model: XH-M452
- Input voltage: DC 12V
- Temperature range: -20~60 Celsius
- Humidity range: 00%-100% RH
- Detection accuracy: 0.1 Celsius 0.1% RH
- Detection accuracy: 0.1 Celsius
- Sensor: 1 Meter Temperature and humidity sensor
- Output Type: Relay Output (Switch Output)
- Size: 65x55x28mm
-
- Model: YS-S401
- Working Voltage: DC 5V~24V
- Maximum Working Current: 15mA @ 5V DC
- Flow Rate Range: 0.3~6L/min
- Connection: 6mm (external diameter)
- Inlet Water Pipe Diameter: 2.5-4mm
- Load Capacity: 10mA (DC 5V)
- Operating Temperature: 80
- Liquid Temperature: 120
- Operating Humidity: 35%-90%RH
- Water Pressure: 2.0MPa
- Storage Temperature: -25 to + 80
- Storage Humidity: 25%-95%RH