-
-20%
Out Of StockPIC 16F877 Microcontroller
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThis robust (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s robust PIC® architecture into a 40- or 44-pin package. It is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self-programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). These features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.
-
-20%
ATMEGA 328P ATMEGA328P-PU MICROCONTROLLER
Original price was: ₨1,500.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewThe ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU),allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328P-PU AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.
-
-8%
Atmel Attiny85 Attiny-85 ATtiny85-20PU
Original price was: ₨1,200.00.₨1,099.00Current price is: ₨1,099.00. Quick ViewFeatures of ATtiny85 Microcontroller:-
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
- Package – SMD
-
-12%
TB6560 Stepper Motor Driver IC
Original price was: ₨1,050.00.₨929.00Current price is: ₨929.00. Quick ViewThe latest 3rd generation TB6565 Stepper Driver has been upgraded to the intelligent, professional and industrial-level drive, embedding intelligent memory chip and upgrading the external manual control tools.
-
This IC is a 16-Bit SPI I/O Expander with Serial Interface. This IC has 25mA sink/source capability per I/O.
-
-50%
HI-LINK 120VAC-220VAC 5VDC 3W Power Supply
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick View- Input voltage:90-240 VAC
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Low power consumption, environmental protection, no-load loss <0.1W
- 100% load aging and testing
- Operation Temperature: -20 — +60
- Store Temperature: -40 — +80
- Relative humidity: 5 — 95 %
- Cooling way by radiation
- Atmospheric pressure: 80—106 Kpa
- Sea level elevation: 2000 m
- Rated input voltage: 100-240 VAC
- Input voltage range: 90-264 VAC
- Meets UL and CE requirements
- Ultra-thin and ultra-small
-
-27%
Atmega8 Microcontrollers IC 8Kbytes
Original price was: ₨899.00.₨659.00Current price is: ₨659.00. Quick ViewThe Atmel AVR ATmega8 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8 achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.
-
-25%
The 8085 is an 8-bit general purpose microprocessor that can address 64K Byte of memory. It has 40 pins and uses +5V for power. It can run at a maximum frequency of 3 MHz.
-
-8%
Multiturn Variable Potentiometer 1K
Original price was: ₨600.00.₨550.00Current price is: ₨550.00. Quick ViewA potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
-
Multiturn Variable Potentiometer 10K / Variable Resistor. There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at ELECTRONATION, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
-
-11%
Transformer 12V Center Tapped 3AMP
Original price was: ₨620.00.₨549.00Current price is: ₨549.00. Quick View- Output current: 3A
- Supply voltage: 220-230VAC
- Output voltage: 12-0-12VAC
- Soft Iron Core
- 1A Current Drain
-
-14%
Center Tapped Transformer 12V 2.5AMP
Original price was: ₨520.00.₨449.00Current price is: ₨449.00. Quick View- Step-down Centre tapped Transformer
- Input Voltage: 220V AC at 50Hz
- Output Voltage: 12V, 12V or 0V
- Output Current: 2.5A
- Vertical mount type
- Low cost and small package
-
-36%
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information which consists of 8 address bits and 4 data bits. Each address and data input is externally programmable or fed in using switches. The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. These ICs are paired with each other. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address and data, transmitted by a carrier using an RF transmission medium and gives output to the output pins after processing the data. These Ics have operating Voltage : 2.4V ~ 12V. They have Low Power and High Noise Immunity.
-
-20%
8051 Atmel AT89C51 Microcontroller 8-bit
Original price was: ₨500.00.₨399.00Current price is: ₨399.00. Quick View- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
-
-20%
Out Of StockMultiturn Variable Potentiometer 5K
Original price was: ₨495.00.₨396.00Current price is: ₨396.00. Quick ViewA potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
-
-16%
Center Tapped Transformer 220V/15V-0-15V 600MA
Original price was: ₨450.00.₨379.00Current price is: ₨379.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 600MA current. Generally known as a Center tapped transformer.
-
-13%
The AT89C52 is a lowe power, high performance CMOS 8-bit microcontroller with 8K bytes of Flash programmable and reaseable read only memory (PEROM). The on-chip flash allows the program memory to be reprogrammed in-syetem.
-
-15%
Good Quality Transformer, power supplies for all kinds of project and circuit boards available at electronation.pk in best price
-
-29%
Center Tapped Transformer 9V 1.5AMP
Original price was: ₨450.00.₨319.00Current price is: ₨319.00. Quick ViewSpecifications:
- Input Voltage: 220V/AC
- Output Voltage: 9V/AC
- Output current: 1.5 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-23%
Good Quality Transformer, power supplies for all kinds of project and circuit boards.
-
-15%
Center Tapped Transformer 220V/15V-0-15V 400MA
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick ViewGood Quality Transformer, power supplies for all kinds of project and circuit boards. Step down 220V AC to 15V with a maximum 400MA current. Generally known as a Center tapped transformer.
-
-34%
IR2110 Mosfet & IGBT Gate Driver IC
Original price was: ₨450.00.₨299.00Current price is: ₨299.00. Quick ViewThe IR2110 is high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels.
-
This device is designed for use where the output voltage is a product of an input voltage (signal) and a switching function (carrier). Typical applications include suppressed carrier and amplitude modulation, synchronous detection, FM detection, phase detection, and chopper applications.
-
-15%
Center Tapped Transformer 9V 0.4Amp
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Input Voltage: 220V/AC
- Output Voltage: 9V/AC
- Output current: 0.4 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
-15%
Center Tapped Transformer 12V 1.5Amp
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Input Voltage: 220V/AC
- Output Voltage: 12V/AC
- Output current: 1.5 A
- Power : 24 Watts
- Phase: Single Phase
- Frequency:50Hz
- Cooling Type: Dry Type/Air Cooled
- Material: CRGO core and Super enameled copper wire
- Dimensions:85×42.6x50mm
-
8051 is an 8-bit family of microcontrollers developed by Intel. This microcontroller was also referred as a system on a chip because it has 128 bytes of RAM, 4K bytes of ROM, 2 Timers, 1 Serial port, and four ports on a single chip. The CPU can work for only 8 bits of data at a time because 8051 is an 8-bit processor. In case the data is larger than 8 bits then it has to be broken into parts so that the CPU can process conveniently.
-
-45%
The?BTA41 is a 3-pin Standard Insulated?TRIAC?for general purpose AC switching and can be used as ON/OFF function.
-
-38%
MOSFET (metal-oxide-semiconductor field-effect transistor, pronounced MAWS-feet) is a special type of field-effect transistor (FET) that works by electronically varying the width of a channel along which charge carriers (electrons or holes) flow. The wider the channel, the better the device conducts. The charge carriers enter the channel at the source and exit via the drain. The width of the channel is controlled by the voltage on an electrode called the gate, which is located physically between the source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.
-
-17%
EPROM 27C16 is a high speed 16K UV erasable and electrically reprogrammable CMOS EPROM ideally suited for applications where fast turnaround pattern experimentation and low power consumption are important requirements The 27C16 is packaged a 24-pin dual-in-line package.Access time down 450 ns Low CMOS power consumption Active Power 25 mW max Standby Power 53 mW max (98% savings) Performance compatible to NSC800TM CMOS microprocessor Single 5V power supply Pin compatible to MM2716 and higher density EPROMs Static no clocks required TTL compatible inputs outputs TRI-STATE output Windowed DIP Package Specifications guaranteed over full military temperature range 125 C).
-
-31%
TLP250 MOSFET IGBT DRIVER TLP-250
Original price was: ₨360.00.₨249.00Current price is: ₨249.00. Quick View- Input threshold current: IF=5mA(max.)
- Supply current (ICC): 11mA(max.)
- Supply voltage (VCC): 1035V
- Output current (IO): 1.5A (max.)
- Switching time (tpLH/tpHL): 1.5s(max.)
- Isolation voltage: 2500Vrms(min.)
- UL recognized: UL1577, file No.E67349
- Option (D4) type
- VDE approved: DIN VDE0884/06.92,certificate No.76823
- Maximum operating insulation voltage: 630VPK
- Highest permissible over voltage: 4000VPK
- Creepage distance: 6.4mm(min.)
- Clearance: 6.4mm(min.)
-
- Input levels: CMOS level
- 16-line demultiplexing capability
- Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs
- Complies with JEDEC standard no. 7 A
- ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200V
- Multiple package options
- Specified from -40C to +85C and -40C to +125C
-
-15%
IRFP250 N-channel Power MOSFET
Original price was: ₨280.00.₨239.00Current price is: ₨239.00. Quick View- Repetitive Avalanche Ratings
- Dynamic dv/dt Rating
- Hermetically Sealed
- Simple Drive Requirements
- Ease of Paralleling
- Type Designator: IRF250
- Type of Transistor: MOSFET
- Type of Control Channel: N -Channel
-
-8%
L293E Push-Pull Four Channel Drivers
Original price was: ₨240.00.₨220.00Current price is: ₨220.00. Quick View- OVERTEMPERATURE PROTECTION
- OUTPUT CURRENT 1A PER CHANNEL
- INHIBIT FACILITY
- PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive)
- SEPARATE LOGIC SUPPLY
- HIGH NOISE IMMUNITY
-
-37%
- Small Signal NPN Transistor
- Current Gain (hFE), typically 50 for small signal
- Continuous Collector current (IC) is 800mA
- Collector-Emitter voltage (VCEO) is 50 V
- Collector-Base voltage (VCB0) is 75V
- Emitter Base Voltage (VBE0) is 6V
- Turn on time is 40ns
- Turn off time is 250ns
- Available in To-92 Package
-
-40%
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output
-
-20%
Out Of Stock -
-9%
- Internally frequency compensated for unity gain
- Large DC voltage gain 100 dB
- Wide bandwidth (unity gain) 1 MHz (temperature compensated)
- Very low supply current drain (700 A) essentially independent of supply voltage
- Low input biasing current 45 nA (temperature compensated)
- Low input offset voltage 2 mV and offset current: 5 nA
- Input common-mode voltage range includes ground
-
-33%
- Output current (single output): 500 mA (max)
- High sustaining voltage output: 50 V (min)
- Output clamp diodes
- Inputs compatible with various types of logic.
- Package type-AFG: SOP-18 pin
-
20N60 belongs to the family of N-channel MOSFET. Its basically a power MOSFET that means it can handle certain levels of power. Its working principle is based on UTC technology. It provides the fast switching application and the minimum on state resistance as well. handling of high current, high speed of switching and low on sate resistance are its major features. Its real life applications include servo motor drivers, UPS, speed control of AC motor and many more.
-
- Guaranteed zero reading for 0 V input on all scales
- True polarity at zero for precise null detection
- 1pA typical input current
- True differential input and reference, direct display drive – LED lCL7107
- Low noise – less than 15 VP-P
- On-chip clock and reference
- Low power dissipation – typically less than 10mW
- No additional active circuits required
- Enhanced display stability
- Pb-free (RoHS compliant)
-
-28%
SN74HC241 Buffer & Line Driver IC
Original price was: ₨250.00.₨180.00Current price is: ₨180.00. Quick ViewThese octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The HC241 devices are organized as two 4-bit buffers/drivers with separate output-enable (1OE and 2OE) inputs. When 1OE is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs for the respective buffers/drivers are in the high-impedance state.
-
-11%
KBPC3502 Bridge Rectifier Diode 35A 200V
Original price was: ₨200.00.₨179.00Current price is: ₨179.00. Quick ViewBridge rectifier diode with a 35A current rating.
-
-28%
- Small Signal NPN Transistor
- Current Gain (hFE): 450 (maximum)
- Continuous Collector current (IC) is 100mA
- Collector-Emitter voltage (VCEO) is 45V
- Collector-Base voltage (VCB0) is 50V
- Emitter Base Voltage (VBE0) is 6V
- Available in To-18 Metal can Package
-
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 900 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 10mA maximum
- Available in TO-18 Metal Can Package
- Maximum Collector-Base Voltage |Vcb|: 30 V’
- Collector Dissipation: 0.3 W
- Transition Frequency:150 MHz
- Operating Junction Temperature Max (Tj): 175 °C
- Noise Figure – 2 dB
- Operating and Storage Junction Temperature Range -65 to +175 °C
- Collector Capacitance 5pF
-
10K ohm Trimmer Trim Pot Variable Resistor 3296W 3296 Variable Resistor is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer. The potentiometer essentially functions as a variable voltage divider. The resistive element can be seen as two resistors in series(potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. A potentiometer is also commonly known as a potentiometer or pot. The most common form of potmeter is the single turn rotary potmeter. This type of pot is often used in audio volume control (logarithmic taper) as well as many other applications. Different materials are used to construct potentiometers, including carbon composition, cermet, wirewound, conductive plastic or metal film.
-
- Multi-turn / Cermet / Industrial / Sealed
- 5 terminal styles
- Tape and reel packaging available
- Chevron seal design
- Mounting hardware available (H-117P)
- RoHS compliant
-
- Multi-turn / Cermet / Industrial / Sealed
- 5 terminal styles
- Tape and reel packaging available
- Chevron seal design
- Mounting hardware available (H-117P)
- RoHS compliant
-
-21%
Regulator, Step-Down Switching, Adjustable Output Voltage, 1.0 A LM2575, NCV2575
Original price was: ₨190.00.₨150.00Current price is: ₨150.00. Quick View- 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
- Adjustable Version Output Voltage Range of 1.23 V to 37 V 4% Maximum Over Line and Load Conditions
- Guaranteed 1.0 A Output Current
- Wide Input Voltage Range: 4.75 V to 40 V
- Requires Only 4 External Components
- 52 kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability, Low Power Standby Mode
- High Efficiency
- Uses Readily Available Standard Inductors
- Thermal Shutdown and Current Limit Protection
- Moisture Sensitivity Level (MSL) Equals 1
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
- These are Pb−Free Devices
-
-26%
SIP Resistor Arrays (Single Inline Package) is an efficient way to pack several of the same value resistors into a convenient 0.1 spaced package. Available in different resistance values and number of pins. Pin 1 is identified with a dot above the pin also known as Resistor Networks.
-
-26%
- Analog Controlled LED Driver IC with Logarithmic output
- LED incremented by one step for every 3dB
- Monitor upto 30dB using 10 LEDs
- Number of controllable LEDs: 10
- Operating Voltage: 3V to 25V
- Reference Voltage: 1.2V to 12V
- LED sink current: 1mA to 30mA (programmable)
- Both Dot/Bar mode available
- Available in 18-pin DIP, PLCC package
-
TC 4427 is a dual high speed power mosfet driver. ThIS device IS highly latch-up resistant under any conditions within their power and voltage ratings. All terminals are fully protected against Electrostatic Discharge (ESD).
-
-26%
512 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground
. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
. Built-in multidrop controller ensures compatibility with other MicroLAN products
. EPROM partitioned into two 256-bit pages for randomly accessing packetized data
. Each memory page can be permanently write-protected to prevent tampering
. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data
. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page
. Reduces control, address, data, power, and programming signals to a single data pin
. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps
. 8-bit family code specifies DS2501 communications requirements to reader
-
-18%
- The high current transfer ratio of 50%
- High isolation voltage of 7.5K
- High BVCEO of 55V(min)
- UL E91231 recognized
- Custom electrical selections are available
- A forward current of 50mA
- Quad-channel
-
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
-
- Drain Current ID= 9.2A@ TC=25
- Drain Source Voltage : VDSS= 650V(Min)
- Static Drain-Source On-Resistance: RDS(on) = 0.83(Max)
- Avalanche Energy Specified
- Fast Switching
- Simple Drive Requirements
-
This tiny speaker is the perfect addition to any small audio project where you need an8impedance.
-
-14%
L293D IC Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨129.00Current price is: ₨129.00. Quick View- It can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor driver voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
-
6 MHz Crystal Oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
-
-20%
L293D L293-D Dual H-Bridge Motor Driver
Original price was: ₨150.00.₨120.00Current price is: ₨120.00. Quick View- Can drive 2 DC motors simultaneously in either direction
- Wide voltage supply range: 4.5V to 36V
- Separate input-logic supply
- Internal ESD protection
- High-noise-immunity inputs
- Thermal shutdown
- Output clamp diodes for inductive transient suppression
-
The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
-
-46%
TL084 circuits JFET Input Op-amp
Original price was: ₨200.00.₨109.00Current price is: ₨109.00. Quick View- Input Offset Voltage Options of 6.0 mV and 15 mV Max
- Low Input Bias Current: 30 pA
- Low Input Offset Current: 5.0 pA
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13 V/s
- Low Supply Current: 1.4 mA per Amplifier
- High Input Impedance: 1012
-
The 2N2905 from Multicomp Pro is a through-hole, silicon planar PNP low power bipolar transistors in a TO-39 metal can package. These are general-purpose transistors suitable for switching applications.
-
-18%
9N90 is a N-Channel enhancement mode power mosfet.
-
-34%
CD4538 – Dual Monostable Multivibrator
Original price was: ₨150.00.₨99.00Current price is: ₨99.00. Quick View- Wide supply voltage range 3.0V to 15V
- High noise immunity 0.45 VCC (typ.)
- Low power Fan out of 2 driving 74L TTL compatibility or 1 driving 74LS
- New formula: PWOUT e RC (PW in seconds, R in Ohms, C in Farads)
- g1.0% pulse-width variation from part to part (typ.) Wide pulse-width range 1 ms to %
- Separate latched reset inputs
- Symmetrical output sink and source capability
- Low standby current 5 nA (typ.) @ 5 VDC Y Pin compatible to CD4528
-
IRF4905 MOSFET is a P-Channel HEXFET Power MOSFET available in a TO-220AB package and is based on Advanced Process Technology. It is mainly used for fast switching purpose, capable of providing ultra-low on-resistance. This tiny device comes with three terminals called gate, drain and source where the gate terminal is used to control the current on remaining two terminals. The area between source and drain is known as a channel that is widely dependent on the voltage applied to the gate terminal.
-
- Darlington medium-power NPN Transistor
- High DC Current Gain (hFE), typically 1000
- Continuous Collector current (IC) is 5A
- Collector-Emitter voltage (VCE) is 100 V
- Collector-Base voltage (VCB) is 100V
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 120mA
- Type NPN
- Collector-Emitter Voltage: 100V
- Collector-Base Voltage: 100V
- Emitter-Base Voltage: 5V
- Collector Current: 5A
- Collector Dissipation: 65W
- DC Current Gain (hfe): 1000
- Operating and Storage Junction Temperature Range: -65 to +150C
- Package: TO-220
-
-18%
The LF33CV is a very low drop voltage regulator. It has an output voltage of 3.3 V and a output current of 500 mA. Input voltage range 2.5V to 16V. It is suitable for low noise, low power applications and specially in battery powered systems.
-
-53%
SG3525 / KA3525 PWM Controller IC in Pakistan
Original price was: ₨190.00.₨89.00Current price is: ₨89.00. Quick View- DUAL SOURCE/SINK OUTPUT DRIVERS
- LATCHING PWM TO PREVENT MULTIPLE PULSES
- PULSE-BY-PULSE SHUTDOWN
- INTERNAL SOFT-START
- 8 TO 35 V OPERATION
- 100 Hz TO 500 KHz OSCILLATOR RANGE
- 5.1 V REFERENCE TRIMMED TO 1 %
- ADJUSTABLE DEADTIME CONTROL
- INPUT UNDERVOLTAGE LOCKOUT WITH HYSTERESIS
- SEPARATE OSCILLATOR SYNC TERMINAL
-
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 8A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 500V
- Drain Source Resistance (RDS) is 0.85 Ohms
- Rise time and fall time is 23nS and 20nS
- Available in To-220 package
-
-41%
- Technology Family: LS
- Rating: Catalog
- Supply voltage: 1.0V to 5.5V
- Frequency at nominal voltage: 35 MHz
- Typical propagation delay: 21nS
- Low power consumption: 32mW
- Operating temperature: -40ºC to +125ºC
- ESD protection
- Balanced propagation delays
- Designed specifically for high speed
- Channels (#): 1
- Configuration: 3:8
- Product type: Standard
-
-51%
DS1302 is a tickle-charge timekeeping chip which contains a real-time clock/calendar and 31 bytes of static RAM. DS1302 uses serial communication to interact with microcontrollers. Also, it automatically adjust the date for the month with fewer days. Clock operates in 24hr or 12hr format with an AM/PM indicator. DS1302 chip is also commonly used as DS1302 RTC module which comes with a 32 kHz crystal and on-board battery backup all in a small SIP module that is compatible with a breadboard. DS1302 module are used by makers with Arduino, Raspberry Pi and other Micro-controllers.
-
-20%
2SA1941 bipolar transistor p-n-p type transistor. Collector-Emitter Voltage: -140 V Collector-Base Voltage: -140 V Emitter-Base Voltage: -5 V Collector Current: -10 A Collector Dissipation – 100 W DC Current Gain (hfe) – 55 to 160 Transition Frequency – 30 MHz Operating and Storage Junction Temperature Range -55 to +150 ?C
-
-20%
- Analog Controlled LED Driver IC
- Number of controllable LEDs: 10
- Operating Voltage: 3V to 18V
- Input Analog voltage range: 1.2V to 12V
- LED sink current: 2mA to 30mA (programmable)
- Both Dot/Bar mode available
- Can be cascaded to control upto 100 LEDs
- Available in 18-pin DIP package
-
-11%
CD4033 is a simple decoder IC that is commonly used to drive Seven segment displays.
-
-44%
74LS158 is a high speed Quad 2-input Multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs.
-
Features
- High Speed Operation: tpd (CLK to Y) = 20 ns typ (CL = 50 pF)
- High Output Current: Fanout of 10 LSTTL Loads
- Wide Operating Voltage: VCC = 2 V to 6 V
- Low Input Current: 1 µA max
- Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
-
-47%
The IC CD4026 is an IC which can perform the function of both a counter as well a 7-segment Driver. One single IC can be used to count form zero (0) to nine (9) directly on a Common Cathode type 7-segment display. The count can be increased by simply giving a high clock pulse; also more than one digit (0-9) can be created by cascading more than one CD4026 IC. So if you have a 7-segment (CC) display on which you have to display numbers that are being counted based on some condition then this IC will be a perfect choice.
-
- Wide range of digital and analog signal levels: digital 3 – 15V, analog to 15Vp-p
- Low “ON” resistance: 80Ω (typ.) over entire 15Vp-p
- signal-input range for VDD − VEE = 15V
- High “OFF” resistance:
- channel leakage of ±10 pA (typ.) at VDD − VEE = 10V
- Logic level conversion for digital addressing signals of
- 3 – 15V (VDD − VSS = 3 – 15V) to switch analog signals
- to 15 Vp-p (VDD − VEE = 15V)
- Binary address decoding on chip
-
- High-Voltage Types (20V Rating)
- CD4073BMS Triple 3-Input AND Gate
- CD4081BMS Quad 2-Input AND Gate
- CD4082BMS Dual 4-Input AND Gate
- Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
-
- Dynamic dV/dt rating
- Repetitive avalanche rated
- Fast switching
- Ease of paralleling
- Simple drive requirements
-
- Type –NPN
- Collector-Emitter Voltage: 60V
- Collector-Base Voltage: 60V
- Emitter-Base Voltage: 5V
- Collector Current: 3A
- Collector Dissipation – 30W
- DC Current Gain (hfe) –40 to 320
- Transition Frequency – 5 MHz
- Operating and Storage Junction Temperature Range -55 to +150C
-
-20%
- Resistance: 8 ohm
- Wattage: 2W
- Shape: Round
- Size: 2.5″ (inch) / approx. 65mm
- Magnet: Open Type
-
- Maximum Terminal current: 4A
- On-state Gate voltage: 1.4V
- Gate trigger current: 10mA
- Max Terminal Voltage is 600 V
- Holding current: 2.2mA
- Latching current: 4mA
- Available in To-220 Package
-
- 3.3V, 5V, 12V, and adjustable output versions
- Adjustable version output voltage range, 1.2V to 37V ±4% max over line and load conditions
- Available in TO-220 and TO-263 packages
- Guaranteed 3A output load current
- Input voltage range up to 40V
- Requires only 4 external components
- Excellent line and load regulation specifications
- 150 kHz fixed frequency internal oscillator
- TTL shutdown capability
- Low power standby mode, IQ typically 80 µA
- High efficiency
- Uses readily available standard inductors
- Thermal shutdown and current limit protection
-
-20%
The uA723 is a precision integrated-circuit voltage regulator, featuring high ripple rejection, excellent input and load regulation, excellent temperature stability, and low standby current. The circuit consists of a temperature-compensated reference-voltage amplifier, an error amplifier, a 150-mA output transistor, and an adjustable-output current limiter.The uA723 is characterized for operation from 0C to 70C.
-
It is an integrated circuit that converts the signals from the RS232 serial port to the proper signal which is used in the TTL compatible digital logic circuits. The MAX232 can convert the signals like RX, TX, CTS, and RTS and it is a dual driver/receiver.
-
- Op-amp coupled with MOSFET at output
- Wide power supply Range
- Singe supply – 5V to 16V
- Dual supply – ±2.5V to ±8V
- Input Terminal current: 1mA
- Maximum Output Voltage: 13.3V
- Maximum source current: 22mA
- Maximum sink current: 20mA
- Supply current: 10mA
- Common Mode Rejection Ration (CMRR): 80dB
-
-30%
74HC164 8-Bit Parallel-Out Shift Register
Original price was: ₨100.00.₨70.00Current price is: ₨70.00. Quick ViewFeatures/Specs:
Wide Supply Voltage Range from 2.0V to 6.0V
Sinks or Sources 4mA at VCC = 4.5V
CMOS Low Power Consumption
Schmitt Trigger Action at all Inputs
ESD Protection Exceeds JESD 22v 200-V Machine Model (A115)
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Range of Package Options SO-14 and TSSOP-14
Totally Lead-Free & Fully RoHS Compliant
Halogen and Antimony Free. Green Device
-
-22%
Out Of StockThe HEF4104B is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high voltage circuits. For example low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high voltage LOCMOS. It has four data inputs (A0 to A3), an active HIGH output enable input (OE), four data outputs (B0 to B3) and their complements (B0 to B3).
-
Optocoupler 817 QUAD contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA.
-
- High-Voltage Types (20V Rating)
- CD4071BMS Quad 2-Input OR Gate
- CD4072BMS Dual 4-Input OR Gate
- CD4075BMS Triple 3-Input OR Gate
- Medium Speed Operation: tPHL, tPLH = 60ns (typ) at 10V
- 100% Tested for Quiescent Current at 20V
- Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
- Standardized Symmetrical Output Characteristics
-
-14%
- N-Channel Power MOSFET
- Continuous Drain Current (ID) is 110A when VGS is 10V
- Minimum Gate threshold voltage 2V
- Drain to Source Breakdown Voltage: 55V
- Low On-Resistance of 8.0m
- Gate-Source Voltage is (VGS) is 20V
- Rise time is 101ns
- It is commonly used with Power Switching circuits
- Available in To-220 package
-
-14%
- Type –NPN
- Collector-Emitter Voltage: 400V
- Collector-Base Voltage: 450V
- Emitter-Base Voltage: 7V
- Collector Current: 10A
- Collector Dissipation – 80W
- DC Current Gain (hfe) – 10
- Operating and Storage Junction Temperature Range -55 to +150C
-
-14%
- Type: NPN
- Collector-Emitter Voltage, max: 140 V
- Collector-Base Voltage, max: 140 V
- Emitter-Base Voltage, max: 5 V
- Collector Current − Continuous, max: 10 A
- Collector Dissipation: 100 W
- DC Current Gain (hfe): 55 to 160
- Transition Frequency, min: 30 MHz
- Operating and Storage Junction Temperature Range: -55 to +150 °C
- Package: TO-3P
-
C1383 is a Bipolar NPN type transistor which is used for low-frequency power amplification and driver amplification.
-
-19%
This laser pointer or laser pen is a small handheld device with a laser diode emitting a very narrow coherent low-powered laser beam of visible light, it is frequently used in lecture halls and demonstrations to point at topics of interest on a presentation board. In a school setting, they have become ubiquitous, and they are very useful teaching aids.