Arduino & IOT Boards

Default sorting
Show
48
  • -43%

    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module

    IOT Boards
    (3)
    Original price was: ₨2,000.00.Current price is: ₨1,139.00. Quick View
    • CPU Tensilica Dual-Core 32-bit 240 MHz LX6 processors, integrated 520 Kb SRAM
    • Wifi 802.11 b/g/n/e/i
    • Bluetooth v4.2 BR/EDR and BLE
    • Memory 4 MByte Flash
    • Temperature Range -40 to 125 Deg C.
  • -33%

    ESP32 WROOM-32 Wifi+Bluetooth MCU Module 30 Pin

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,500.00.Current price is: ₨999.00. Quick View
    1. Single or Dual-Core 32-bit LX6 Microprocessor with clock frequency up to 240 MHz.
    2. 520 KB of SRAM, 448 KB of ROM and 16 KB of RTC SRAM.
    3. Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
    4. Support for both Classic Bluetooth v4.2 and BLE specifications.
    5. 34 Programmable GPIOs.
    6. Up to 18 channels of 12-bit SAR ADC and 2 channels of 8-bit DAC
    7. Serial Connectivity includes 4 x SPI, 2 x I2C, 2 x I2S, 3 x UART.
    8. Ethernet MAC for physical LAN Communication (requires external PHY).
    9. 1 Host controller for SD/SDIO/MMC and 1 Slave controller for SDIO/SPI.
    10. Motor PWM and up to 16 channels of LED PWM.
    11. Secure Boot and Flash Encryption.
    12. Cryptographic Hardware Acceleration for AES, Hash (SHA-2), RSA, ECC and RNG.
  • -28%

    ESP32-CAM WiFi + Bluetooth Camera Module

    Arduino & IOT Boards
    (4)
    Original price was: ₨1,900.00.Current price is: ₨1,375.00. Quick View
    • Module Model: ESP32-CAM
    • Package: DIP-16
    • Size: 2740.54.5(?0.2)mm
    • SPI Flash: Default 32Mbit
    • RAM: Internal 520KB + External 4M PSRAM
    • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
    • Wi-Fi: 802.11 b/g/n/e/i
    • Support Interfaces: UART, SPI, I2C, PWM
    • TF Card Support: Maximum 4G
    • IO Port: 9
    • Serial Port Rate: Default 115200 bps
    • Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
    • Antenna: Onboard PCB antenna with a gain of 2dBi
    • Power Supply Range: 5V
    • Operating Temperature: -20°C to 85°C
  • -47%

    ESP8266 ESP-01 WiFi Module

    IOT Boards
    (1)
    Original price was: ₨600.00.Current price is: ₨319.00. Quick View
    • 802.11 b/g/n
    • Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP Protocol Stack
    • Integrated TR switch, balun, LNA, power amplifier, and matching network
    • Integrated PLLs, regulators, DCXO, and power management units
    • +19.5dBm output power in 802.11b mode
    • Power down leakage current of <10uA
    • 1 Mb flash memory
    • Integrated low-power 32 bit CPU could be used as an application processor
    • SDIO 1.1/ 2.0, SPI, UART
    • STBC, 1×1 MIMO, 2×1 MIMO
    • A-MPDU and A-MSDU aggregation and 0.4ms guard interval
    • Wake up and transmit packets in <2ms
    • Standby power consumption of <1.0mW(DTIM3)
  • -30%

    ESP8266 ESP12E -NODEMCU – CH340

    IOT Boards
    (3)
    Original price was: ₨799.00.Current price is: ₨559.00. Quick View
    • Input Voltage: 2.5 ~ 3.6V
    • Operating Voltage: 3.3V
    • CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
    • 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
    • 512 KB of EEPROM (512x Arduino UNO!)
    • External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
    • IEEE 802.11 b/g/n Wi-Fi
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • WEP or WPA/WPA2 authentication, or open networks
    • Digital I/O Pins (DIO): 16
    • Analog Input Pins (ADC): 1
    • UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
    • SPIs: 1
    • I2Cs: 1
    • Flash Memory: 4 MB
    • SRAM: 64 KB
    • Clock Speed: 80 Mhz
    • 80 Mhz clock (5x arduino UNO or mega!)
  • -8%
    Out Of Stock

    ESP8266 NodeMCU V1.0 ESP-12E WiFI Module

    IOT Boards
    (0)
    Original price was: ₨400.00.Current price is: ₨369.00. Quick View
    • Microcontroller:      ESP-8266 32-bit
    • Clock Speed:             80 MHz
    • USB Converter:        CP2102
    • USB Connector:       Micro USB
    • Operating Voltage:  3.3V
    • Flash Memory:         4 MB
    • Digital I/O:                11
    • Analog Inputs:          1
    • Communications:     Serial, SPI.  I2C and 1-Wire via software libraries
    • WiFi:                           Built-in 802.11 b/g/n
  • -18%
    Out Of Stock

    ESP8266 Witty Cloud ESP-12F WiFi Module

    IOT Boards
    (0)
    Original price was: ₨1,099.00.Current price is: ₨899.00. Quick View
    1. LDR Light Sensor on board.
    2. WS2812 Led on board.
    3. Includes CH340G USB-to-UART programmer.
    4. Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
    5. Supports 3 modes: AP, STA, AP+STA.
    6. Dimensions: 24mm x 16mm.
    7. Micro USB connection for power and/or programming
  • -31%

    Flame Sensor Module

    Color
    (0)
    Original price was: ₨200.00.Current price is: ₨139.00. Quick View
    • Photosensitivity is high
    • Response time is fast
    • Simple to use
    • Sensitivity is adjustable
    • Detection angle is 600,
    • It is responsive to the flame range.
    • Accuracy can be adjustable
    • Operating voltage of this sensor is 3.3V to 5V
    • Analog voltage o/ps and digital switch o/ps
    • The PCB size is 3cm X 1.6cm
    • Power indicator & digital switch o/p indicator
    • If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
  • -17%

    Flex Sensor 2.2 Inch

    Flex & Force
    (0)
    Original price was: ₨3,600.00.Current price is: ₨2,999.00. Quick View
    • Angle Displacement Measurement
    • Bends and Flexes physically with motion device
    • Possible Uses
    • Simple Construction
    • Low Profile
    • Physical Therapy
    • Musical Instruments
    • Computer Peripherals
    • Medical Devices
    • Gaming (Virtual Motion)
    • Robotics
  • -13%
    Out Of Stock

    Flex Sensor 4.5″

    Flex & Force
    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00. Quick View
    • Thickness: 0.4mm
    • Trigger Force: 20g, triggered (default resistance<200kΩ)
    • Pressure Measuring Range: 20g~6kg
    • Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
    • Initial Resistance: >10MΩ
    • Activation Time: <0.01S
    • Operating Temperature: -40℃~+85℃
    • Lifespan: >1million times
    • Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
    • Response Time: <10ms
    • Drift: <5%, 2.5Kg Force, Static load 24H
  • -32%

    Force Sensitive Resistor – Small

    Flex & Force
    (0)
    Original price was: ₨1,899.00.Current price is: ₨1,299.00. Quick View

    This is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

    Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.

    These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

  • -15%

    Force Sensitive Resistor 0.5 INCH FSR

    Flex & Force
    (0)
    Original price was: ₨1,350.00.Current price is: ₨1,150.00. Quick View
    • Detection area (detection range): 14.5 mm circle
    • Physical Diameter: 18.3mm circle
    • The output signal (output signal): Passive variable to hold
    • The Force-sensitive range (range), pressure test: 100g to 10 kg
    • Lifespan (life):> 10 m letter actuation

    Dimensions:

    • Total length: 56mm
    • Overall width: 18.3mm
    • Diameter detection: 14.5mm
    • Thickness: 0.4mm
  • -51%

    FSR402 Force Sensitive Resistor FSR

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨729.00. Quick View

    The FSR is made of 2 layers separated by a spacer. The more one presses, the more of those Active Element dots touch the semiconductor and that makes the resistance go down. FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it is pressed. These sensors are fairly low cost, and easy to use but they’re rarely accurate. They also vary some from the sensor to sensor perhaps 10%. So basically when you use FSRs you should only expect to get ranges of response. While FSRs can detect weight, they’re a bad choice for detecting exactly how many pounds of weight are on them. However, for most touch-sensitive applications like “has this been squeezed or pushed and about how much” they’re a good deal for the money!

  • -18%

    Glass Electric Mercury Tilt Switch

    Others
    (0)
    Original price was: ₨60.00.Current price is: ₨49.00. Quick View
    • Voltage: 20 V
    • Current: 300 mA
    • Operating Angle: 5o to 10o
    • Size: 5 mm
    • Length: 13 x 1 mm
    • Diameter: 4 mm to 5 mm
  • -10%
    Out Of Stock

    GPS Arduino Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨5,350.00.Current price is: ₨4,799.00. Quick View

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -55%

    GPS Neo 6m U-Blox NEO-6M GPS Module

    Communication Modules
    (0)
    Original price was: ₨1,999.00.Current price is: ₨899.00. Quick View
    • 5Hz position update rate
    • Operating temperature range: -40 TO 85C UART TTL socket
    • EEPROM to save configuration settings
    • Rechargeable battery for Backup
    • The cold start time of 38 s and Hot start time of 1 s
    • Supply voltage: 3.3 V
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
    • Separate GPS antenna

  • Graphical LCD 128×64

    Alphanumeric Displays
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,999.00. Quick View
    • Operating Voltage is 5V
    • it is with Chinese font
    • it has a blue backlight
    • Controller used in it ST7920
    • its Size is 93x70mm
    • It displays 20 characters in 4 lines.
    • Its input voltage range is 4.5V to 5.5V.
    • The operating voltage for LCD is 5V Direct Current (DC).
    • Its interface consists of 6800 8 bit parallel.
    • Positive transflective is its display type.
    • Its backlight consists of blue and green.
  • Out Of Stock

    Gravity: 80cm Arduino Infrared Proximity Sensor

    Accelero, Gyro. IMU, Magneto
    (0)
    ₨890.00 Quick View

    INTRODUCTION

    This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.

    Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.

  • -20%

    GY-273 HMC5883L Triple-axis Magnetometer Compass Module

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨750.00.Current price is: ₨599.00. Quick View
    1. Type: GY-271
    2. Operating Voltage : 3 -5 V DC.
    3. Chipset: HMC5883L.
    4. Communication: I2C protocol.
    5. Measuring range: ± 1.3-8 Gauss.
    6. Dimensions : 14.8 x 13.5 x 3.5 mm.
    7. Weight: 2 gm.
    8. 3-axis magnetic electronic compass.
    9. Precise heading information.
    10. Fits into small projects easily.
    11. I2C communication.
  • -20%

    GY-273 Magneto HMC5883L

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨750.00.Current price is: ₨599.00. Quick View
    1. Supply Voltage VCC: 3.3 to 6 V
    2. Heading Accuracy: 1 to 2
    3. Magnetic Field Range: -8 to +8 Gauss
    4. I2C Address: 0x1E (7-bit address)
    5. Max Data Rate: 160 Hz
    6. Digital Voltage Level: 3.3V
    7. Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
    8. Weight: 0.95g (0.034oz)
  • -41%

    GY-291 ADXL345 3-Axis Accelerometer Module

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨590.00.Current price is: ₨349.00. Quick View
    • Main Chip: ADXL345
    • Model: GY-291
    • Power Supply: 3-5V
    • Means of Communication: IIC / SPI Communication Protocol
    • Measuring Range: ±2g /±16g
    • Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
    • Accelerometer Normal Operating Current: 450µA
    • Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
    • Sleep Mode Current: 8µA
    • Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
    • User-Programmable Interrupts
    • Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
  • -33%
    Out Of Stock

    GY-31 TCS230 TCS3200 Color Sensor

    Color
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,350.00. Quick View
    1. High-resolution conversion of light intensity to frequency.
    2. Chip pins all has drawn for standard 100.
    3. Put the needle (2.54 mm).
    4. Mil-convenient for bitmap board.
    5. Programmable color and full-scale output frequency.
    6. Communicate directly with a microcontroller.
    7. Low-profile surface mount package.
  • -12%

    Gy-61 Triple Axis Accelerometer Adxl335

    Accelero, Gyro. IMU, Magneto
    (1)
    Original price was: ₨1,990.00.Current price is: ₨1,749.00. Quick View
    1. 3V-6V DC Supply Voltage
    2. Onboard LDO Voltage regulator
    3. Can be interfaced with a 3V3 or 5V Microcontroller.
    4. All necessary components are populated.
    5. Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
    6. Tap/Double Tap Detection
    7. Free-Fall Detection
    8. Analog output
    9. Build in ultra-low noise linear LDO voltage regulator
    10. Built-in onboard filters, which reduce noise from the motor and other high-current electronics
    11. All sensors connected to the I2C bus
    12. You can easily select two I2C addresses for MPU6050 by soldered jumper
    13. Power LED
    14. Build in Logic level converter for I2C
    15. Dimensions 20x16mm
    16. Designed for 5V logic level
  • -19%

    GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨490.00.Current price is: ₨399.00. Quick View

    A 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.

  • -27%

    GY521 MPU6050 Module 6DOF

    Accelero, Gyro. IMU, Magneto
    (1)
    Original price was: ₨550.00.Current price is: ₨399.00. Quick View
    • Chip: MPU-6050
    • Power supply: 3v-5V
    • Gyroscope range: + 250 500 1000 2000/ s
    • Acceleration range:  2  4  8  16 g
    • Communication: Standard IIC communication agreement
    • Chip built-in 16 bit AD converter, 16 bits of data output
    • Pin Pitch 2.54 mm
    • SIZE: 20.3mm x 15.6mm
  • -25%

    Hall Effect Sensor Module

    Sensors
    (0)
    Original price was: ₨185.00.Current price is: ₨139.00. Quick View
    1. Digital Output Hall-effect sensor.
    2. Operating voltage: typically 5V.
    3. Output Current: 25mA.
    4. It can be used to detect both the poles of a magnet.
    5. The output voltage is equal to the operating voltage.
    6. Operating temperature: -40C to 85C.
    7. Turn on and Turn off time is 2 sec each.
    8. Inbuilt reverse polarity protection.
    9. Suitable for Automotive and Industrial Applications.
  • -12%

    Hall Sensor 44E

    Accelero, Gyro. IMU, Magneto
    (0)
    Original price was: ₨180.00.Current price is: ₨159.00. Quick View
    1. 3.5V to 24V DC operation voltage
    2. Low current consumption
    3. Temperature compensation
    4. Wide operating voltage range
    5. Open-Collector pre-driver
    6. 50mA maximum sinking output current
    7. Reverse polarity protection
  • -26%

    HC-05 Bluetooth Module

    Bluetooth
    (1)
    Original price was: ₨950.00.Current price is: ₨699.00. Quick View

    The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.

  • -35%

    HC-06 Bluetooth Module

    Bluetooth
    (0)
    Original price was: ₨850.00.Current price is: ₨549.00. Quick View

    HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.

  • -45%

    HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,350.00.Current price is: ₨749.00. Quick View
    • Working frequency: 433.4MHz to 473.0MHz
    • Supply voltage: 3.2V to 5.5VDC
    • Communication distance: 1,000m in the open space
    • Serial baud rate: 1.2Kbps to 115.2Kbps（default 9.6Kbps）
    • Receiving sensitivity: -117dBm to -100dBm
    • Transmit power: -1dBm to 20dBm
    • Interface protocol: UART/TTL
    • Operating temperature: -40℃ to +85℃
    • Dimensions: 27.8mm x 14.4mm x 4mm
  • -12%

    HC-SR501 PIR Human Motion Sensor

    Distance & Proximity
    (0)
    Original price was: ₨260.00.Current price is: ₨229.00. Quick View
    • Wide range on input voltage varying from 4.V to 12V (+5V recommended)
    • Output voltage is High/Low (3.3V TTL)
    • Can distinguish between object movement and human movement
    • Has to operating modes – Repeatable(H) and Non- Repeatable(H)
    • Cover distance of about 120° and 7 meters
    • Low power consumption of 65mA
    • Operating temperature from -20° to +80° Celsius
  • -62%

    HCSR04 ultrasonic sensor Bracket

    Distance & Proximity
    (0)
    Original price was: ₨180.00.Current price is: ₨69.00. Quick View
    • Thickness: 2.8 – 3.1 mm
    • Inner diameter: 16 mm
    • Fixing Hole Diameter: 3.8 mm
    • Material: High Quality Imported Acrylic
    • Colour: Blue
    • Application: Stationary ultrasonic sensor modules and other products
  • -35%

    HCSR501 HC-SR501 PIR Sensor

    Distance & Proximity
    (1)
    Original price was: ₨350.00.Current price is: ₨229.00. Quick View
    • Use BISS0001 signal processing IC, sanyo genius regulator
    • Voltage: 5V  20V
    • Power Consumption: 65mA
    • TTL output: 3.3V, 0V
    • Delay time: adjustable (0.3 sec 10 minutes)
    • Lock time: 0.2 sec
    • Trigger methods: L  disable repeat trigger, H enable repeat trigger
    • Sensing range: less than 120 degree, within 7 meters
    • Temperature:  15 ~ +70
    • Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
  • -41%

    Heart Rate Monitor ECG AD8232 Module + Leads

    Heart Rate And Muscle Sensors
    (0)
    Original price was: ₨2,500.00.Current price is: ₨1,479.00. Quick View
    • Supply voltage: DC 3.3V
    • Output: Analog output
    • Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
    • Size 36mm * 31mm * 18mm
    • Operating temperature: -40C  +85 C
  • Hot
    -42%

    High Quality 37 in 1 Sensor Module Board Set Kit For Arduino

    Arduino & IOT Boards
    (0)
    Original price was: ₨4,500.00.Current price is: ₨2,599.00. Quick View

    This 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • -20%
    Out Of Stock

    Horizontal Float Switch (White)

    Pumps
    (0)
    Original price was: ₨990.00.Current price is: ₨792.00. Quick View
    • Switch Closed in Horizontal Position and Open When Vertical
    • Corrosion Resistant Polypropylene Construction
    • M12 Thread Size for Screw Fixing Internally
    • Contact Rating: 220VAC @ 1A
    • DC Contact Rating: 24Vdc @ 0.25A
    • Temperature Rating: -30C to 100C
    • Suitable for Water Tanks and Water Treatment Systems
  • -26%

    Horizontal Float Switch Black

    Pumps
    (0)
    Original price was: ₨470.00.Current price is: ₨349.00. Quick View
    1. Material: plastic
    2. Color: black
    3. Switch power(Max): 10W
    4. Switching voltage(Max):AC 100V
    5. Switching current(Max):AC 0.5A
    6. Electric strength: AC1500V/Imin
    7. Contract resistance: 200 milli-ohm
    8. Temperature rating:-20 ~ +80
    9. Cable length: About 400 mm / 15.76″
    10. Float length: 85 mm / 3.35″
  • -43%

    Hot End For 3D Printer

    Others
    (0)
    Original price was: ₨3,000.00.Current price is: ₨1,699.00. Quick View
    • Model: J-Head Hot End V6
    • Design: Long-Distance
    • Improved processing of flexible filament
    • More compact design
    • Easier maintenance
    • Reduced heating
    • Improved temperature control and cooling
    • Material: aluminum
    • Nozzle: 0.4 mm
    • Filament: 1.75 mm
    • 12V 40W heating cartridge
    • NTC thermistor 100k
    • Cable length: approx. 90 cm
  • -27%

    Humidity and Temperature Sensor DHT22

    Sensors
    (0)
    Original price was: ₨899.00.Current price is: ₨659.00. Quick View
    • Calibrated and doesn’t require extra components
    • Input: 3.3-6V
    • Measuring current: 1-1.5mA
    • Standby current: 40-50uA
    • Humidity: 0-100% RH
    • Temperature: -40º to 80ºC (+-0.5ºC)
    • RH accuracy: +-2%
  • -54%
    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,200.00.Current price is: ₨549.00. Quick View
    1. Voltage: 3-3.6V (recommended 3.3V) V.
    2. Maximum output power: +20dBm.
    3. Emission mode current(peak): 115mA.
    4. Receive Mode Current(peak): 45mA.
    5. Power-down mode current: 4.2uA.
    6. Sensitivity 2Mbps mode in received: -92dBm.
    7. Sensitivity 1Mbps mode in received: -95dBm.
    8. PA gain: 20DbLNA gain: 10Db.
    9. Sensitivity 250kbps mode in received: -104dBm.
    10. Operating Range: 1 km
    11. LNA Noise figure: 2.6 Db.
    12. Antenna Gain (peak): 2Dbi.
    13. 2MB rate (Open area): 520m.
    14. 1MB rate (Open area): 750m.
    15. 250Kb rate (Open area): 1100m.
    16. Interface: SPI.
  • -7%

    HX711 Module Load Cell Voltage Amplifier

    Sensors
    (0)
    Original price was: ₨160.00.Current price is: ₨149.00. Quick View

    The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor Load Cell Amplifier and ADC Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell with some calibration. You?ll be able to get very accurate weight measurements.

  • Out Of Stock

    Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range

    Distance & Proximity
    (0)
    ₨2,200.00 Quick View

    Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5  to 12  (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.

  • Out Of Stock

    Infrared Proximity Sensor – GP2Y0A02YK0F Sharp Long Range

    Distance & Proximity
    (0)
    ₨1,250.00 Quick View

    Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.

    This sensor is great for sensing objects up to 5 feet away!

  • Out Of Stock

    Infrared Proximity Sensor – GP2Y0A21Y Sharp Mid Range

    Distance & Proximity
    (0)
    ₨2,450.00 Quick View

    Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.

  • -16%

    Infrared receiver KY-022

    IR & Vision
    (0)
    Original price was: ₨200.00.Current price is: ₨169.00. Quick View
    • Voltage: 3.3V to 5V
    • Characteristics: 700nm x 1mm
    • Chipset: TSOP1838 37.9kHz
    • Daylight Rejection: up to 500LUX
    • Receiving Distance: up to 18 m
    • Size: 19mm x 15mm x 14mm
  • -60%

    INFRARED TEMPERATURE SENSOR GY-906 MLX90614

    Sensors
    (0)
    Original price was: ₨3,950.00.Current price is: ₨1,599.00. Quick View
    • Easy to integrate
    • Mounted on a breakout board with two types of pins
    • 10k Pull up resistors for the I2C interface with optional solder jumpers
    • Factory calibrated in temperature range:
      • -40+125C for sensor temperature
      • -70+380C for object temperature
    • High accuracy of 0.5C over a wide temperature range (+50C for both) High (medical) accuracy calibration
    • The measurement resolution of 0.02C
    • Single and dual-zone versions
    • SMB is compatible digital interface
    • Customizable PWM output for continuous reading
    • Different package options for applications and measurements versatility
  • -25%

    Interfacing EMG Muscular Signal Sensor

    Heart Rate And Muscle Sensors
    (0)
    Original price was: ₨6,000.00.Current price is: ₨4,499.00. Quick View

    Features:

    • Small Form Factor
    • Specially Designed for Microcontrollers
    • Adjustable Gain using onboard potentiometer
    • 5mm Connector

    Applications:

    • Video games
    • Robotics
    • Medical equipment

  • IR Infrared LED Transmitter And Receiver Pair

    IR & Vision
    (0)
    ₨49.00 Quick View

    Transmitter (Tx):

    • Power: 0.1W.
    • Absolute Maximum Forward Current: 50mA.
    • Launch Angle (Approx): 45 Deg.
    • Wavelength: 940nm.
    • Typical forward voltage drop: 1.1V.
    • Diameter: 5mm.

    Receiver (Rx):

      • Power: 0.15W.
      • Maximum Current: 30mA.
      • Receiving Angle (Approx): 45 Deg.
      • Wavelength: 940nm.
      • Typical forward voltage drop: 1.2V.
      • Diameter: 5mm.