-
INTRODUCTION
This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.
Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.
-
20A PWM DC Motor Speed Controller Regulator
Original price was: ₨1,650.00.₨849.00Current price is: ₨849.00. Quick View- Working Voltage: DC 10V – 60V
- Control Power: 0.01-1200W
- Static Current: 0.010A (Standby)
- Rated Current: 15A
- Max.Current: 20A
- PWM Duty Cycle: 0% -100%
- PWM Frequency: 25 kHz
- Control Voltage: 0-5V
- Potentiometer kind: Single turn
- Resistance: 10k
- Power: 125mW
- Mounting: On cable
- Characteristics: Linear
- Body material: Metal
- Mechanical rotation angle: 300
- Max. operating voltage: 200V
- Material: Plastic, metal
- Module Size: 77x45x29mm
-
Arduino UNO R3 SMD – Economic
Original price was: ₨1,500.00.₨839.00Current price is: ₨839.00. Quick View- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
-
- Supply Voltage : 12 V
- Fused at 5A for additional safety and component protection
- Heated bed control with additional 11A fuse
- Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
- I2C and SPI pins left available for future expansion.
- 2 stepper motor for Z axis in parallel.
-
PR12 4DP Proximity sensor Autonics
Original price was: ₨999.00.₨799.00Current price is: ₨799.00. Quick ViewSensing distance
1.5mmInstallation
Shield(flush)Standard sensing target
8×8×1mm(iron)Response frequency
1.5kHzCurrent specification
Current consumption: Max. 10mAControl output
PNP Normally OpenMaterial
Brass(nickel plated)Cable Standard/material
Standard cableBody length
Standard typeWeight
Approx. 64g (approx. 52g) -
5V 1604 LCD 16×4 Character LCD Screen
Original price was: ₨1,000.00.₨799.00Current price is: ₨799.00. Quick View16X4 CHARACTER LCD 1604 Blue LCD DISPLAY is a dot-matrix liquid crystal display module specially used for displaying letters, numbers, symbols, etc. 16?4 LCD Display can display 4 lines with 16 characters in each line. Divided into 4-bit and 8-bit data transmission methods. 1604 Blue Character LCD provides rich command settings: clear display; cursor return to origin; display on/o; cursor on/o; display character ashes; cursor shift; display shift, etc.
-
1.3 inch OLED Display 128X64 SSD1306 I2C SH1106
Original price was: ₨1,100.00.₨799.00Current price is: ₨799.00. Quick View- Resolution: 128 X 64 pixels
- Display color: Blue text on black background
- Interface: I2C
- Operating voltage: 3.3V – 5V
- Power consumption: 10-30mA
- Dimensions: 27mm x 27mm x 4.1mm
-
5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
Original price was: ₨900.00.₨799.00Current price is: ₨799.00. Quick View- Imported high-quality double-sided compact PCB.
- Opto-isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
-
Horizontal Float Switch (White)
Original price was: ₨990.00.₨792.00Current price is: ₨792.00. Quick View- Switch Closed in Horizontal Position and Open When Vertical
- Corrosion Resistant Polypropylene Construction
- M12 Thread Size for Screw Fixing Internally
- Contact Rating: 220VAC @ 1A
- DC Contact Rating: 24Vdc @ 0.25A
- Temperature Rating: -30C to 100C
- Suitable for Water Tanks and Water Treatment Systems
-
PR12 4DN Autonics Proximity Sensor
Original price was: ₨999.00.₨769.00Current price is: ₨769.00. Quick ViewPR12 4DN Autonics PR12-4DN Inductive Proximity Sensor – 4mm is the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness, and type of metal being detected and will in general be between 70 to 80% of the standard distance.
-
PR08-2DP Inductive Proximity Sensor
Original price was: ₨999.00.₨769.00Current price is: ₨769.00. Quick View- Wire type and power
- DC 3-wire type 12-24VDC Sensing side diameter
- M08Sensing distance 2mm
- Installation Non-shield(non-flush)
- Standard sensing target8x8x1mm(iron)
- Response frequency1kHzCurrent specification
- Current consumption: Max. 10mA
- Control output PNP Normally Open Material Brass(nickel plated)
- Cable Standard/material Standard cable
- Protection structureIP67
- Approval Body length Standard type
- Environment Ambient temperature-25 to 70C, storage: -30 to 80C
- Environment Ambient humidity35 to 95% RH, storage: 35 to 95% RH
- Hysteresis(distance)Max. 10% of sensing distance
- Residual voltage Max. 2V
- Weight Approx. 64g(approx. 52g)
-
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
-
HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
Original price was: ₨1,350.00.₨749.00Current price is: ₨749.00. Quick View- Working frequency: 433.4MHz to 473.0MHz
- Supply voltage: 3.2V to 5.5VDC
- Communication distance: 1,000m in the open space
- Serial baud rate: 1.2Kbps to 115.2Kbps(default 9.6Kbps)
- Receiving sensitivity: -117dBm to -100dBm
- Transmit power: -1dBm to 20dBm
- Interface protocol: UART/TTL
- Operating temperature: -40℃ to +85℃
- Dimensions: 27.8mm x 14.4mm x 4mm
-
ADS1115 Analog-to-Digital Converter
Original price was: ₨1,100.00.₨749.00Current price is: ₨749.00. Quick View- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
-
Solar water pump or air cooler pump DC 12V 8watt, Shafi
Original price was: ₨1,500.00.₨749.00Current price is: ₨749.00. Quick ViewThis awesome water pump comes with an adjustable flow and is easy to clean. Strainer protects impeller from damage. Shell is made of high-quality ABS plastic. This pump is a totally submersible flow-adjustable water pump. The motor will automatically cut off the power if it is overheating. The flow can be up to 212GPH. It has good waterproof, has high dielectric strength, and is safe and reliable. Suitable for acid, alkali, and salt environments.
-
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
- Microcontroller: Atmel ATmega168 or ATmega328.
- Operating Voltage (logic level): l5 V.
- Input Voltage (recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB is used by the boot loader.
- SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
- EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
- Clock Speed: 16 MHz.
- Dimensions : 0.73 x 1.70
- Length: 45 mm.
-
FSR402 Force Sensitive Resistor FSR
Original price was: ₨1,500.00.₨729.00Current price is: ₨729.00. Quick ViewThe FSR is made of 2 layers separated by a spacer. The more one presses, the more of those Active Element dots touch the semiconductor and that makes the resistance go down. FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it is pressed. These sensors are fairly low cost, and easy to use but they’re rarely accurate. They also vary some from the sensor to sensor perhaps 10%. So basically when you use FSRs you should only expect to get ranges of response. While FSRs can detect weight, they’re a bad choice for detecting exactly how many pounds of weight are on them. However, for most touch-sensitive applications like “has this been squeezed or pushed and about how much” they’re a good deal for the money!
-
MAX6675 Module + K Type Thermocouple
Original price was: ₨1,500.00.₨719.00Current price is: ₨719.00. Quick View- Thermocouple temperature range: 0 to 450 °C
- Module sensor temperature range (°C): 0 to 1024
- Temperature resolution (°C): 0.25
- Module supply voltage: 3 to 5.5 V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible
- Termocouple accuracy (0-700°C): 8 LSBs
- Termocouple disconnect detection
-
Piezoelectric Shock Tap Sensor Vibration Switch Module
Original price was: ₨899.00.₨715.00Current price is: ₨715.00. Quick View- Item Name: Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Type: Vibration Switch Sensor Module
- Working Voltage: 5.0V (DC)
- Interface Type: AD/DO
- AO: Analog Signal Output
- DO: TTL Level Output
- Working Temperature: -10 C ~ +70 C
- Size: Approx. 20 x 20mm / 0.8 x 0.8in
- Weight: 4.5 g / 0.2 oz(approx.)
- Test Method and Wiring:
- G (GND):: Power ground
- V (VCC): Operating voltage 5V (DC)
- ADO: Analog signal output
- According to the vibration intension, the higher the output voltage, the higher the vibration amplitude sensitivity can be adjusted by the potentiometer (the left turn sensitivity is low, the right turn sensitivity is high). The high sensitivity output can be adjusted to respond with a mouth blow or a tap with a hand.
- DO: TTL level output. Output signal LED indication. TTL output valid signal is high level, output control power
-
The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.
-
- 3.3-5.5V Input
- 1-1.5mA measuring current
- 40-50 uA standby current
- Humidity from 0-100% RH
- -40-80C Temperature Range
- +-2% RH accuracy
- +-0.5 degrees C
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
-
- Operating frequency: 125 kHz
- Baud rate: 9600
- Interface: TTL level RS232 format
- Working voltage: DC 5V
- Working current: <50mA
- Receive distance: 20~50mm
- Dimension (mm): 38.5 x 20
- Weight: 7g
-
USB Security Tester LCD Display
Original price was: ₨1,000.00.₨699.00Current price is: ₨699.00. Quick ViewUSB tester is a unique product which can be used to test the voltage and current levels of a system or a USB based circuit.
-
Biomedical Sensor Pad (10 pack)
Original price was: ₨1,300.00.₨699.00Current price is: ₨699.00. Quick ViewThis is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
-
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
Original price was: ₨1,099.00.₨669.00Current price is: ₨669.00. Quick View- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
-
Humidity and Temperature Sensor DHT22
Original price was: ₨899.00.₨659.00Current price is: ₨659.00. Quick View- Calibrated and doesn’t require extra components
- Input: 3.3-6V
- Measuring current: 1-1.5mA
- Standby current: 40-50uA
- Humidity: 0-100% RH
- Temperature: -40º to 80ºC (+-0.5ºC)
- RH accuracy: +-2%
-
PWM controller DC Motor speed controller 12V-40V 10A
Original price was: ₨999.00.₨639.00Current price is: ₨639.00. Quick View- Input Voltage: DC 12V-40V
- Control Power: 0.01-400W
- Rated Current: 8A
- Maximum Current: 10A
- Static Current: 0.02A(standby status)
- Frequency: 13kHz
- Speed Adjustment Range: 10%-100%
- Hole Diameter: 3.2mm
- Operating Temperature: -20C~125C
- Dimensions: 75*60*28mm / 2.95*2.36*1.10in
- Package Weight: Approx. 73g/2.6oz
-
AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3
Original price was: ₨950.00.₨599.00Current price is: ₨599.00. Quick View- Ultra Low Standby Power 90uA ~ 400uA
- Communication Distance Range : 100 ft / 60mtr
- Super Fast Reaction Speed : 0.4 Sec.
- Built-in PCB antena
- Power Input : 3.6V To 6V DC (Cannot higher than 6V)
- Size : 43 X 15 mm
- Color : Blue
- Net weight : 4g
-
APDS9960 proximity and light intensity sensor I2C 3.3V
Original price was: ₨799.00.₨599.00Current price is: ₨599.00. Quick View- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
-
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
-
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
Original price was: ₨800.00.₨599.00Current price is: ₨599.00. Quick ViewD1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.
-
GY-273 HMC5883L Triple-axis Magnetometer Compass Module
Original price was: ₨750.00.₨599.00Current price is: ₨599.00. Quick View- Type: GY-271
- Operating Voltage : 3 -5 V DC.
- Chipset: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
- Dimensions : 14.8 x 13.5 x 3.5 mm.
- Weight: 2 gm.
- 3-axis magnetic electronic compass.
- Precise heading information.
- Fits into small projects easily.
- I2C communication.
-
- Supply Voltage VCC: 3.3 to 6 V
- Heading Accuracy: 1 to 2
- Magnetic Field Range: -8 to +8 Gauss
- I2C Address: 0x1E (7-bit address)
- Max Data Rate: 160 Hz
- Digital Voltage Level: 3.3V
- Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
- Weight: 0.95g (0.034oz)
-
ESP8266 ESP12E -NODEMCU – CH340
Original price was: ₨799.00.₨559.00Current price is: ₨559.00. Quick View- Input Voltage: 2.5 ~ 3.6V
- Operating Voltage: 3.3V
- CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
- 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
- 512 KB of EEPROM (512x Arduino UNO!)
- External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
- IEEE 802.11 b/g/n Wi-Fi
- Integrated TR switch, balun, LNA, power amplifier and matching network
- WEP or WPA/WPA2 authentication, or open networks
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 Mhz
- 80 Mhz clock (5x arduino UNO or mega!)
-
Esp Adaptor with Temp Sensor
Original price was: ₨640.00.₨550.00Current price is: ₨550.00. Quick ViewESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
-
HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
Original price was: ₨1,200.00.₨549.00Current price is: ₨549.00. Quick View- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Emission mode current(peak): 115mA.
- Receive Mode Current(peak): 45mA.
- Power-down mode current: 4.2uA.
- Sensitivity 2Mbps mode in received: -92dBm.
- Sensitivity 1Mbps mode in received: -95dBm.
- PA gain: 20DbLNA gain: 10Db.
- Sensitivity 250kbps mode in received: -104dBm.
- Operating Range: 1 km
- LNA Noise figure: 2.6 Db.
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Interface: SPI.
-
Clock Thermometer Ks-782a-5 1 Display Orange, Auto Cigarette Lighter
Original price was: ₨800.00.₨549.00Current price is: ₨549.00. Quick View- Large and easy-to-read display for both the clock and thermometer readings.
- Accurate temperature sensing to provide real-time temperature measurements.
- 24-hour clock format, displaying hours, minutes, and potentially seconds.
- Switchable between Celsius and Fahrenheit temperature units.
- Backlight or illumination for enhanced visibility at night or in dark conditions.
- Some models might have additional features like alarms or other convenience functions
-
HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.
-
OLED Display Module 12864 0.96 Inch 4Pin
Original price was: ₨600.00.₨549.00Current price is: ₨549.00. Quick View- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
-
- Model: YS-S401
- Working Voltage: DC 5V~24V
- Maximum Working Current: 15mA @ 5V DC
- Flow Rate Range: 0.3~6L/min
- Connection: 6mm (external diameter)
- Inlet Water Pipe Diameter: 2.5-4mm
- Load Capacity: 10mA (DC 5V)
- Operating Temperature: 80
- Liquid Temperature: 120
- Operating Humidity: 35%-90%RH
- Water Pressure: 2.0MPa
- Storage Temperature: -25 to + 80
- Storage Humidity: 25%-95%RH
-
The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption
-
MX-350 MAX Solar DC Water Pump
Original price was: ₨780.00.₨499.00Current price is: ₨499.00. Quick View- Completely Submersible Motor.
- Extremely Quite Operations.
- Suction Cups To Fit Any Water Tank.
- Long Lasting Water Proof Ceramic Shaft.
- Suitable For Fresh And Sea Water Appliances.
-
SPO2 MAX30102 Blood Oxygen Concentration Sensor
Original price was: ₨1,200.00.₨499.00Current price is: ₨499.00. Quick View- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Free Algorithm
- Highly integrated, small-size sensor
- Non-chest based heart-rate/SpO2 detection
- Ultra-low power consumption
-
Telko S063 Portable Door Wedge Guard
Original price was: ₨788.00.₨499.00Current price is: ₨499.00. Quick View- High output: 120DB alarm siren
- Standard 9 volt battery operation
- Required no special installation
- Rugged high impact ABS construction
- Provide alarm siren operation from contact with door or from movement vibration.
-
- Output controllable: Digital
- Compatible: With any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage: 250VAC/30VDC
- Max. switching current: 10A
- Size: 76mm x 56mm x 17mm
-
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer Module
Original price was: ₨520.00.₨480.00Current price is: ₨480.00. Quick View- Wide analog input voltage range from -5 V to +5 V
- Complies with JEDEC standard no. 7A
- Low ON resistance:
- 80 ohm(typical) at VCC -VEE = 4.5 V
- 70 ohm(typical) at VCC -VEE = 6.0 V
- 60 ohm(typical) at VCC -VEE = 9.0 V
- Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
- Typical break before make built-in
- ESD protection:
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101E exceeds 1000 V
- Multiple package options
- Specified from -40 to +85 and -40 to +125