-
-40%
GPS Neo 6m U-Blox NEO-6M GPS Module
Original price was: ₨1,999.00.₨1,199.00Current price is: ₨1,199.00. Quick View- 5Hz position update rate
- Operating temperature range: -40 TO 85C UART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separate GPS antenna
-
-31%
Dual-axis XY Joystick Module for Arduino
Original price was: ₨230.00.₨159.00Current price is: ₨159.00. Quick View- Dimensions: 40 x 27 x 15 (LxWxH) mm
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction
-
Hot-22%
Beginner Arduino Uno Starter Kit
Original price was: ₨8,999.00.₨6,999.00Current price is: ₨6,999.00. Quick ViewIn Pakistan, the Arduino Starter Kit Arduino Basic Kit Arduino Beginner Kit is the finest educational option for learning how to utilize the Arduino platform. It includes an Arduino Uno SMD board, an enhanced version of the R3, a variety of sensors and, Motor, led’s Dot-matrix, Lcd, and many other components required for the very first steps with electronics into the realm of interactive and sensing objects. The Arduino Starter Kit is an excellent present for children aged 9 to 99. The Arduino starter kit is an open-source electronics prototyping platform built on adaptable, user-friendly hardware and software. It includes all of the necessary components to begin programming with the Arduino Uno board.
-
-35%
HCSR501 HC-SR501 PIR Sensor
Original price was: ₨350.00.₨229.00Current price is: ₨229.00. Quick View- Use BISS0001 signal processing IC, sanyo genius regulator
- Voltage: 5V 20V
- Power Consumption: 65mA
- TTL output: 3.3V, 0V
- Delay time: adjustable (0.3 sec 10 minutes)
- Lock time: 0.2 sec
- Trigger methods: L disable repeat trigger, H enable repeat trigger
- Sensing range: less than 120 degree, within 7 meters
- Temperature: 15 ~ +70
- Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
-
Hot-42%
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board With Logo
Original price was: ₨6,000.00.₨3,499.00Current price is: ₨3,499.00. Quick View- Arduino Mega 2560 rev3 ATmega2560 microcontroller
- Input voltage – 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
-
-49%
Out Of Stock20A PWM DC Motor Speed Controller Regulator
Original price was: ₨1,650.00.₨849.00Current price is: ₨849.00. Quick View- Working Voltage: DC 10V – 60V
- Control Power: 0.01-1200W
- Static Current: 0.010A (Standby)
- Rated Current: 15A
- Max.Current: 20A
- PWM Duty Cycle: 0% -100%
- PWM Frequency: 25 kHz
- Control Voltage: 0-5V
- Potentiometer kind: Single turn
- Resistance: 10k
- Power: 125mW
- Mounting: On cable
- Characteristics: Linear
- Body material: Metal
- Mechanical rotation angle: 300
- Max. operating voltage: 200V
- Material: Plastic, metal
- Module Size: 77x45x29mm
-
-60%
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
Original price was: ₨350.00.₨139.00Current price is: ₨139.00. Quick View- Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
-
-49%
RC522 RFID Reader Module 13.56MHz
Original price was: ₨590.00.₨299.00Current price is: ₨299.00. Quick View- Module Name: MF522-ED
- Working current 13 26mA/ DC 3.3V
- Standby current 10-13mA/DC 3.3V
- sleeping current <80uA
- peak current <30mA
- Working frequency 13.56MHz
- Card reading distance 0 60mm mifare1 card
- Protocol SPI
- data communication speed Maximum 10Mbit/s
- Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
- Dimension 40mm 60mm
- Environment
- Working temperature -20 80 degree
- Storage temperature -40 85 degree
- Humidity relevant humidity 5% 95%
- Max SPI speed: 10Mbit/s
-
-49%
Soil Moisture Sensor For Arduino
Original price was: ₨350.00.₨179.00Current price is: ₨179.00. Quick View- Easy-to-use
- 3-pin screw pin terminal is pre-soldered to the board
- PCB coated in gold finishing
- 3.3V to 5V operating supply voltage range
-
-38%
- Keypad Layout: 4×4 matrix layout, consisting of 16 keys arranged in four rows and four columns.
- Size: Typically measures 76mm x 69mm (Length x Width).
- Number of Keys: 16 programmable keys, each with a unique position in the matrix.
- Input Method: When a key is pressed, it generates a unique combination of row and column signals, which can be decoded to identify the pressed key.
- Interface: Typically interfaces with microcontrollers or embedded systems using digital I/O pins.
- Material: Made of durable and lightweight materials suitable for various environments.
- Compatibility: Compatible with a wide range of microcontrollers and development boards.
- Application: Commonly used in projects requiring user input, password entry, or menu navigation.
-
-11%
5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
Original price was: ₨900.00.₨799.00Current price is: ₨799.00. Quick View- Imported high-quality double-sided compact PCB.
- Opto-isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
-
-16%
Out Of StockESP32-CAM WiFi + Bluetooth Camera Module
Original price was: ₨1,900.00.₨1,599.00Current price is: ₨1,599.00. Quick View- Module Model: ESP32-CAM
- Package: DIP-16
- Size: 2740.54.5(?0.2)mm
- SPI Flash: Default 32Mbit
- RAM: Internal 520KB + External 4M PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/e/i
- Support Interfaces: UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Port: 9
- Serial Port Rate: Default 115200 bps
- Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
- Antenna: Onboard PCB antenna with a gain of 2dBi
- Power Supply Range: 5V
- Operating Temperature: -20°C to 85°C
-
-27%
PWM DC Motor Speed Controller 8A With Display
Original price was: ₨1,500.00.₨1,099.00Current price is: ₨1,099.00. Quick View- Suitable for motors with voltage: 12 and 24V
- The total range of permissible tension: 6V to 30V DC
- Output current: Rated current 5A (8A max short term)
- PWM frequency: 16 kHz
- Adjustable PWM duty cycle : 0% -100%
- LED Digital display showing the duty cycle
- The dimensions of the regulator are 7.8 x 4.2 x 2.5 cm
-
-34%
4 digit 7 segment Display for Digital Clock
Original price was: ₨150.00.₨99.00Current price is: ₨99.00. Quick View- Reverse Voltage(Vr): 5 V
- Reverse Leakage Current (Ir): 50A
- Forward Current (If): 25mA
- Peak Forward Current (Ifp): 100 mA
- Power Dissipation (P): 100 mW per Segment
- Operating Temperature (Top): -40C to +80C
- Storage Temperature (Ttsg): -40C to +85C
- Lead Soldering Temperature: 260C
-
- A seven-segment LED display
- Common cathode configuration
- Right-hand decimal point
- Long lifetime operation
- IC Compatible
- Low power dissipation
-
-9%
OLED Display Module 12864 0.96 Inch 4Pin
Original price was: ₨600.00.₨549.00Current price is: ₨549.00. Quick View- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
-
-31%
- Photosensitivity is high
- Response time is fast
- Simple to use
- Sensitivity is adjustable
- Detection angle is 600,
- It is responsive to the flame range.
- Accuracy can be adjustable
- Operating voltage of this sensor is 3.3V to 5V
- Analog voltage o/ps and digital switch o/ps
- The PCB size is 3cm X 1.6cm
- Power indicator & digital switch o/p indicator
- If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
-
-12%
- 3.5V to 24V DC operation voltage
- Low current consumption
- Temperature compensation
- Wide operating voltage range
- Open-Collector pre-driver
- 50mA maximum sinking output current
- Reverse polarity protection
-
-17%
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
- Opto-isolated inputs
- Indication LED’s for Relay output status
-
-23%
- Drive Type: Piezo Discs
- Resonant frequency(kHz): 3.0~5.0+/- 0.5 KHz
- Resonant impedance (ohms): 300 max
- Diameter: 10mm/ 0.39 inches
- Thickness: 0.3mm/ 0.01 inches
- Wire Length: 40mm/ 1.57 Inches
- Material: Brass
- Color: As shown
-
-22%
IR receiver VS1838B TL1838 – 38KHz
Original price was: ₨90.00.₨70.00Current price is: ₨70.00. Quick View- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz Diode
- Voltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz DiodeVoltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
-
-8%
ESP-01 Adapter Module 3.3-5V
Original price was: ₨270.00.₨249.00Current price is: ₨249.00. Quick View- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
-
- Product Name: LED Digital Display Tube
- Type: Common Cathode
- Model: 50AH
- Common Cathode : 3-8
- Digital Display: 1 Digit
- Digital Number: 1 Bit Segment
- Emitted Color: Red
- Pin Number: 10
- Continuous Forward Current: 20mA
- Average Forward Voltage: 2V
- Power Consumption : 3mW
- Luminous Intensity: mcd
- Number Height : 0.5 inch
- Panel Size : 19 x 12. x 8mm / 0.5 x 0.5 x 0.31 inch (L*W*H)
- Total Size : 19 x 12. x mm / 0.5 x 0.5 x 0.55 inch (L*W*H)
- Material : Plastic, Metal
- Color : Black, White
-
-52%
Character LCD 16X2 Blue color
Original price was: ₨650.00.₨309.00Current price is: ₨309.00. Quick ViewLCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16×2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments and other multi segment LEDs. The reasons being: LCDs are economical; easily programmable; have no limitation of displaying special & even custom characters (unlike in seven segments), animations and so on. A 16×2 LCD means it can display 16 characters per line and there are 2 such lines.
-
-15%
MQ2 Gas Sensor Detector Module
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick View- Its dimensions are 36 x 20 x 21 (LxWxH)
- Its weight is 8gm.
- Its operating voltages are plus 5V.
- It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.
- Its analog output voltages are 0V to 5V.
- Its digital output voltages are 0 to 5V.
- Its preheat duration is 20 seconds.
- This sensor can be used as a digital or analog sensor.
- Its sensitivity can be varied by the potentiometer.
-
-17%
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
-
-17%
SCT-013-000 Non-invasive AC Current Clamp Sensor 20A
Original price was: ₨1,500.00.₨1,250.00Current price is: ₨1,250.00. Quick ViewAC Current Signal Conversion Module
- Input Voltage (VCC): 3.3V-5.5V
- Interface: Gravity Analog (PH2.0-3P，analog voltage output 0.2-2.8V DC)
- AC Voltage Input Range: 0-1V (AC RMS)
- Relative Error: +/- 4%
- Dimension: 32×27 mm
- Weight: 5g
Open Type AC Transformer Probe
- AC Current Range: 0-20A
- Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
- Accuracy: ±1%
- Non-linearity: ≤±0.2%
- Frequency Range: 50Hz~1kHz
- Cable Length: 1m
- Working Temperature: -25 ℃~+70 ℃
- Opening Size: 13×13 mm / 0.51×0.51 in
- Weight: 50g
-
-31%
SCT013-000 CT 100A Non-invasive AC Current Sensor
Original price was: ₨1,800.00.₨1,249.00Current price is: ₨1,249.00. Quick View- Core Material: Ferrite
- External Material : ABS
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
-
-14%
Piezo Pack of 5 Large Pickups 45mm
Original price was: ₨500.00.₨430.00Current price is: ₨430.00. Quick ViewPiezo Pack of 5 Large Pickups 45mm Attach the round disc to the object that will be knocked on such as a door and measure the voltage across the two wires. Piezo elements can also produce sound when a voltage is applied across them. They convert between electricity and vibration in both ways; Vibration applied at the round end can be detected as a voltage across the wire leads and inversely, the voltage applied across the wire leads causes the round end to vibrate.
-
Hot-40%
High Quality 37 in 1 Sensor Module Board Set Kit For Arduino
Original price was: ₨4,999.00.₨2,999.00Current price is: ₨2,999.00. Quick ViewThis 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
-
-25%
Microphone Sound Sensor Module
Original price was: ₨199.00.₨149.00Current price is: ₨149.00. Quick ViewThis module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent low. It has working voltage of 3.3-5V.
-
-25%
Out Of Stock16 Channel Relay Module
Original price was: ₨2,800.00.₨2,099.00Current price is: ₨2,099.00. Quick View- Product Name: 16-Channel Relay Module
- Number of Channels: 16
- Control Signal voltage: 5V, active low
- Load Voltage: AC 250V/10A, AC 125V/15A
- DC 30V 10A
- Input power: 12V
- Each board needs 15-20mA Driver Current
- I / O port driver is active in low level.
- 1-16 channel optionally fully open/closed,
- or any channel.
- Standard interface that can be controlled directly by microcontroller
- Indication LEDs for Relay output status.
- Independent common end COM makes the relay convenient for users to access different signals.
- Use optocoupler protection with high safety performance
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Size: 8 x 5.7 x 1.2 inches
- Weight: 8.8 ounces
-
-15%
RF 315/433 Transmitter/Receiver Module
Original price was: ₨350.00.₨299.00Current price is: ₨299.00. Quick ViewTransmitter :
- Working voltage: 3V – 12V for max. power use 12V
- Working current: max Less than 40mA max, and min 9mA
- Resonance mode: (SAW)
- Modulation mode: ASK
- Working frequency: Eve 315MHz Or 433MHz
- Transmission power: 25mW (315MHz at 12V)
- Frequency error: +150kHz (max)
- Velocity: less than 10Kbps
So this module will transmit up to 90m in open area.
Receiver :
- Working voltage: 5.0VDC +0.5V
- Working current: 5.5mA max
- Working method: OOK/ASK
- Working frequency: 315MHz-433.92MHz
- Bandwidth: 2MHz
- Sensitivity: excel 100dBm (50)
- Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)
-
-18%
- Infrared Transmitter/Emitter
- 3mm in diameter
- Wavelength: 940nm
- Anode: Long pin (small flag)
- Cathode: Short pin (big flag)
-
-18%
Out Of Stock- Output controllable: Digital
- Compatible: With any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage: 250VAC/30VDC
- Max. switching current: 10A
- Size: 76mm x 56mm x 17mm
-
-40%
- Local sensor accuracy (Max) (+/- C): 0.5
- Operating temperature range (C): -40 to 110,-55 to 150,0 to 100,0 to 70
- Supply voltage (Min) (V): 4
- Supply voltage (Max) (V): 30
- Supply current (Max) (uA): 14
- Sensor gain (mV/Deg C): 10
- Rating: Catalog
- Features: UL Recognized
- Interface: Analog Output
-
Hot-47%
Arduino UNO R3 Dip WITH CABLE
Original price was: ₨3,000.00.₨1,579.00Current price is: ₨1,579.00. Quick View- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
-
-31%
ESP32 CAM MB USB Programmer Board CH340G USB To Serial Port
Original price was: ₨650.00.₨449.00Current price is: ₨449.00. Quick View-
Driver Compatibility: Requires CH340G driver installation for proper operation.
-
Supported Devices: Compatible with all ESP32-CAM boards.
-
Button Types: Includes Reset and Boot buttons.
-
LED Indicators: Power status indication.
-
-
-48%
Out Of StockEGS002 EG8010 IR2113 DC to AC SPWM Pure Sine Wave Inverter Module
Original price was: ₨3,250.00.₨1,699.00Current price is: ₨1,699.00. Quick ViewEG8010 is a digital, function very well brings its own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer architecture, an external 12MHz crystal oscillator, to achieve high precision, and harmonic distortion is very small, 50Hz or 60Hz pure sine wave inverter ASIC. The chip uses CMOS technology, the internal integration of the SPWM sine generator, a dead-time control circuit, the multiplier factor range, a soft start circuit, a protection circuit, an RS232 serial communication interface and a serial driver module 1602 functions.
-
-53%
Out Of StockPWM 40A DC Motor Speed Controller Module
Original price was: ₨3,200.00.₨1,499.00Current price is: ₨1,499.00. Quick ViewThis 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET connected to the individual heatsinks.Features: DC Motor Speed Controller Module with PWM 40 A
- Industrial Quality Board.
- Maximum Output Current of 40A.
- Maximum Output Power of 2000W
- Working Voltage From 9V to 50V.
-
-24%
USB Type-B Connector Breakout Board
Original price was: ₨130.00.₨99.00Current price is: ₨99.00. Quick View- Effective this breakout board has a USB Type B female connector, with all 4 pins broken out to a DIP 2.54mm header.
- Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
- USB 2.0 Type B Female
- 2.54mm Pitch
- DIP4
- color: green
- Material: plastic
- size:20*20*1mm
- Package Contents:
- 2 * USB to DIP adapter board
- Only the above package content, other products are not included.
-
-17%
An NTC is commonly used as a temperature sensor, or in parallel with a circuit as an inrush current limiter.
-
-30%
ESP8266 ESP12E -NODEMCU – CH340
Original price was: ₨999.00.₨699.00Current price is: ₨699.00. Quick View- Input Voltage: 2.5 ~ 3.6V
- Operating Voltage: 3.3V
- CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
- 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
- 512 KB of EEPROM (512x Arduino UNO!)
- External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
- IEEE 802.11 b/g/n Wi-Fi
- Integrated TR switch, balun, LNA, power amplifier and matching network
- WEP or WPA/WPA2 authentication, or open networks
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 Mhz
- 80 Mhz clock (5x arduino UNO or mega!)
-
-10%
The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. A Logic Level Converter is very easy to connect and use since it doesn’t need any programming, all you have to do is connect the 5V wire on one side and the 3.3V on the other.
-
-7%
JSN-SR04T Waterproof Ultrasonic Sensor Module
Original price was: ₨1,400.00.₨1,299.00Current price is: ₨1,299.00. Quick View- Operating Voltage: 5V DC
- Static Operating Current: 5mA
- Operating Current: 30mA
- Acoustic Emission Frequency: 40kHz
- Maximum range: 4.5m
- Minimum range: 25cm
- Connection pins: +5V, Trig, Echo, GND
- Module Dimensions: 41mm * 28.5mm
- Sensitivity: ~0.5cm
- Sight Angle: <50
- Operating Temperature: -10 ~ 70 C
- Storage Temperature: -20 ~ 80 C
-
-25%
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
Original price was: ₨800.00.₨599.00Current price is: ₨599.00. Quick ViewD1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.
-
-35%
Isd1820 Recording And Playback Module With On Board Mic And Loud Speaker
Original price was: ₨680.00.₨439.00Current price is: ₨439.00. Quick View- The main chip: is ISD1820.
- Dimensions: 43 x 34 x 11 (LxWxH) mm.
- The working voltage: is DC 3V-5V.
- Loudspeaker: 8 Ohm, 0.5W.
- An easy-to-use 10-second voice recording.
- High-quality, natural voice restored.
- It can be used as a propaganda module.
- With looping, jog playback, and single-pass play function.
- Available single-chip control.
- This module can directly drive a small speaker 8 ohm 0.5W.
- Power supply: 3-5V, which can be accessed by pin power.
- Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
-
-34%
TSOP 1738 Sensor IR Receiver Plastic (SM0038)
Original price was: ₨90.00.₨59.00Current price is: ₨59.00. Quick View- Photo detector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against electrical field disturbance
- TTL and CMOS compatibility
- Output active low
- Low power consumption
- High immunity against ambient light
- Continuous data transmission possible (up to 2400 bps)
- Suitable burst length 10 cycles/burst