• Out Of Stock

    3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.

    ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.

  • -29%
    Out Of Stock

    100K NTC Thermistor

    (0)
    Original price was: ₨55.00.Current price is: ₨39.00. Quick View
    • Rated power 10mW at 25°C
    • R (Ω) at 25°C: 100.0K ± 1%
    • B-value 25°-85°C: 4665K ± 1%
    • Dissipation Factor: 2
    • Thermal Time Constant: 15
    • Operating Temperature Range °C: –50°C to +110°C
  • -31%

    10A/1A Induction current sensor SCT-013-010 (1V)

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,249.00. Quick View
    • Current measurement range: 0 ÷ 10 A AC
    • Maximum diameter of the measuring cable: fi 12 mm
    • Built -in burdening resistor: Yes
    • Output voltage: 0 ÷ 1 V AC
    • cable length: 1 m
    • mass: 50 g
  • -7%

    2000W PWM AC Motor Speed Control Module Dimmer

    (0)
    Original price was: ₨900.00.Current price is: ₨840.00. Quick View
    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃
  • -32%

    3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit

    (0)
    Original price was: ₨28,000.00.Current price is: ₨18,999.00. Quick View
    • Power supply: 5-30VDC
    • Maximum power consumption: ≤0.15W
    • Operating temperature: -40~80℃
    • NPK parameters:
    • Range: 0-1999 mg/kg(mg/L)
    • Resolution: 1 mg/kg(mg/L)
    • Precision: ±2%FS
    • Response time: ≤1S
    • Protection grade: IP68
    • Probe material: 316 stainless steels
    • Sealing material: Black flame-retardant epoxy resin
    • Default cable length: 2 meters, cable length can be customized.
    • Dimensions: 45*15*123mm
    • Output signal: RS485/4-20ma/0-5v/0-10v
  • -13%

    37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box

    (0)
    Original price was: ₨3,000.00.Current price is: ₨2,599.00. Quick View

    This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • -18%

    3mm IR Transmitter & Receiver

    (0)
    Original price was: ₨60.00.Current price is: ₨49.00. Quick View
    • Infrared Transmitter/Emitter
    • 3mm in diameter
    • Wavelength: 940nm
    • Anode: Long pin (small flag)
    • Cathode: Short pin (big flag)
  • -10%

    4 Way IR Line Tracking / Following Sensor Module

    (0)
    Original price was: ₨490.00.Current price is: ₨439.00. Quick View
    • Operating Voltage: 3.3-5V
    • Fixing Screw Hole: M3
    • Distance setting from 1mm to 10cm
    • Control Card Dimensions: 42x38x12mm
    • Sensor Dimensions: 25x12x12mm
    • Card Output: Digital
  • -23%

    5 Pcs Piezo Discs 10mm

    (0)
    Original price was: ₨350.00.Current price is: ₨270.00. Quick View
    • Drive Type: Piezo Discs
    • Resonant frequency(kHz): 3.0~5.0+/- 0.5 KHz
    • Resonant impedance (ohms): 300 max
    • Diameter: 10mm/ 0.39 inches
    • Thickness: 0.3mm/ 0.01 inches
    • Wire Length: 40mm/ 1.57 Inches
    • Material: Brass
    • Color: As shown
  • -31%

    50A SCT-013-000 Non-invasive AC Current Clamp Sensor

    (0)
    Original price was: ₨1,800.00.Current price is: ₨1,249.00. Quick View
    • Input Current: 0~50A AC
    • Output Mode: DC 0~1V
    • Non-linearity:2-3%
    • Build-in sampling resistance(RL): 62Ω
    • Turn Ratio: 1800:1
    • Resistance Grade: Grade B
    • Work Temperature: -25°C ~ ﹢70°C
    • Dielectric Strength(between shell and output): 1000V AC/1min 5mA
    • Leading Wire in Length: 1m
    • Open Size: 13mm x 13mm
  • -24%

    7 in 1 Soil Integrated Sensor EC PH NPK Moisture Temperature Meter

    (0)
    Original price was: ₨38,000.00.Current price is: ₨28,999.00. Quick View
    • High precision agriculture sensors, rapid response, good exchange ability
    • Good tightness, corrosion resistance, the soil tester can be used in the soil for a long time.
    • Flame retardant epoxy resin curing, completely waterproof, the soil tester can withstand strong external impact.
    • Steel needles are made of high quality materials that can with stand long-term electrolysis , acid and alkali corrosion in soil.
  • -6%

    ACS712 Current Sensor 20A

    (0)
    Original price was: ₨350.00.Current price is: ₨329.00. Quick View
    1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
    2. Weight: 3 gm.
    3. Supply Voltage: 4.5V~5.5V DC
    4. Measure Current Range: -20A~ 20A
    5. Sensitivity: 100mV/A
    6. The current sensor chips: ACS712_ELC-20A.
    7. Pin 5V power supply, onboard power indicator.
    8. There is no the detection current through, the output voltage is VCC / 2.
    9. The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
  • -10%
    Out Of Stock

    ACS712 Current Sensor 30A

    (0)
    Original price was: ₨400.00.Current price is: ₨359.00. Quick View

    ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.

  • -7%

    ACS712 Current Sensor 5A

    (0)
    Original price was: ₨320.00.Current price is: ₨299.00. Quick View
    1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
    2. Weight: 3 gm.
    3. Supply Voltage: 4.5V~5.5V DC
    4. Measure Current Range: -5A~ 5A
    5. Sensitivity: 66mV/A
    6. The current sensor chips: ACS712_ELC-05B.
    7. Pin 5V power supply, onboard power indicator.
    8. There is no the detection current through, the output voltage is VCC / 2.
  • -20%

    AH175 Hall Sensor

    (0)
    Original price was: ₨300.00.Current price is: ₨239.00. Quick View

    Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.

  • -25%

    APDS9960 proximity and light intensity sensor I2C 3.3V

    (0)
    Original price was: ₨799.00.Current price is: ₨599.00. Quick View
    • Gesture recognition using reflected IR
    • Digital proximity sensing using reflected IR
    • Separate Red/Green/Blue light intensity sensors
    • Ambient (clear) light intensity sensor
    • IR light-blocking filter
    • Interrupt output available
    • I2C interface with good library support
    • 3.3V operation
  • -15%

    Arduino Sensor Shield

    (0)
    Original price was: ₨350.00.Current price is: ₨299.00. Quick View
    • It has a Pin 13 LED pilot.
    • It has D0-D13 IO ports.
    • A0-A5 analog IO ports.
    • It contains a reset button.
    • It also contains a Power LED.
    • It has an SD card interface.
    • It contains an Ultrasonic interface.
    • This expansion board has an RS232 interface.
    • It has a Bluetooth interface.
    • It has an APC220 interface.
    • IIC interface.
    • 12864 LCD Parallel interfaces.
    • It contains 12864 LCD Serial Interface
  • -46%

    Biomedical Sensor Pad (10 pack)

    (0)
    Original price was: ₨1,300.00.Current price is: ₨699.00. Quick View

    This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.

  • -18%

    BMP180 – Atmospheric Pressure Sensor

    (0)
    Original price was: ₨300.00.Current price is: ₨245.00. Quick View
    • 1.8V to 3.6V Supply Voltage
    • Low power consumption  0.5uA at 1Hz
    • I2C interface
    • Max I2C Speed: 3.5Mhz
    • Very low noise  up to 0.02hPa (17cm)
    • Full calibrated
    • Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
    • Weight: 1.18g
    • Size: 21mm x 18mm
  • -20%

    BMP180/GY68 Pressure Sensor

    (0)
    Original price was: ₨300.00.Current price is: ₨239.00. Quick View
    1. 1.8V to 3.6V Supply Voltage
    2. Low power consumption – 0.5uA at 1Hz
    3. I2C interface
    4. Max I2C Speed: 3.5Mhz
    5. Very low noise – up to 0.02hPa (17cm)
    6. Fully calibrated
    7. Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
    8. Size: 13mm x 10mm
  • -25%

    D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.

    (1)
    Original price was: ₨800.00.Current price is: ₨599.00. Quick View

    D1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.

  • -20%

    DHT11 Humidity & Temperature Sensor

    (0)
    Original price was: ₨350.00.Current price is: ₨280.00. Quick View
    • Dimension 28mm*12mm*10mm
    • Main chip DHT11 huminity sensor
    • Voltage: DC 5V
    • Digital output
    • Humidity Range: 2090%RH
    • Humidity accuracy:5%RH
    • Temperature range:0-60
    • Temperature accuracy: 2
  • -17%

    DHT11 Temperature and Humidity Sensor

    (1)
    Original price was: ₨300.00.Current price is: ₨249.00. Quick View
    • Operating Voltage: 3.5V to 5.5V
    • Operating current: 0.3mA (measuring) 60uA (standby)
    • Output: Serial data
    • Temperature Range: 0C to 50C
    • Humidity Range: 20% to 90%
    • Resolution: Temperature and Humidity both are 16-bit
    • Accuracy: 1C and 1%
  • -30%

    DHT22 Module

    (0)
    Original price was: ₨999.00.Current price is: ₨699.00. Quick View
    • 3.3-5.5V Input
    • 1-1.5mA measuring current
    • 40-50 uA standby current
    • Humidity from 0-100% RH
    • -40-80C Temperature Range
    • +-2% RH accuracy
    • +-0.5 degrees C
  • -30%

    DS18B20 Temperature Sensor (Probe Type)

    (0)
    Original price was: ₨500.00.Current price is: ₨349.00. Quick View
    • Usable temperature range: -55 to 125C (-67F to +257F)
    • 9 to 12 bit selectable resolution
    • Uses 1-Wire interface- requires only one digital pin for communication
    • Unique 64 bit ID burned into chip
    • Multiple sensors can share one pin
    • 0.5C Accuracy from -10C to +85C
    • Temperature-limit alarm system
    • Query time is less than 750ms
    • Usable with 3.0V to 5.5V power/data
  • -60%

    E3f-ds30c4 – Photoelectric Switch Sensor Pnp

    (1)
    Original price was: ₨3,000.00.Current price is: ₨1,199.00. Quick View

    E3F-DS30C4 M18 Diffuse Reflection Photoelectric Switch Sensor 3 Wires NPN NO DC 10-30VDC 200mA 30cm Adjustable in Pakistan.

  • -2%

    EasyVR Shield 3.0 – Voice Recognition Shield

    (0)
    Original price was: ₨10,000.00.Current price is: ₨9,799.00. Quick View

    Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC.

    EasyVR 2.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost-effective speech and voice recognition capabilities to virtually any application. EasyVR is the third-generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 2.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.

  • -36%

    Electret Condenser Microphone (Mic)

    (0)
    Original price was: ₨45.00.Current price is: ₨29.00. Quick View
    • Operating temperature: -20-70 DEG C
    • Size: 6*2.2mm
    • Operating Voltage: DC 1-10V
    • Operating Reference Voltage: 3V DC
    • Impedance: 2.2K
    • Current: 0.5mA
    • Directivity: Omnidirectional
    • Signal to Noise Ratio: 40dB (MIN)
  • -31%

    Flame Sensor Module

    (0)
    Original price was: ₨200.00.Current price is: ₨139.00. Quick View
    • Photosensitivity is high
    • Response time is fast
    • Simple to use
    • Sensitivity is adjustable
    • Detection angle is 600,
    • It is responsive to the flame range.
    • Accuracy can be adjustable
    • Operating voltage of this sensor is 3.3V to 5V
    • Analog voltage o/ps and digital switch o/ps
    • The PCB size is 3cm X 1.6cm
    • Power indicator & digital switch o/p indicator
    • If the flame intensity is lighter within 0.8m then the flame test can be activated, if the flame intensity is high, then the detection of distance will be improved.
  • -17%

    Flex Sensor 2.2 Inch

    (0)
    Original price was: ₨3,600.00.Current price is: ₨2,999.00. Quick View
    • Angle Displacement Measurement
    • Bends and Flexes physically with motion device
    • Possible Uses
    • Simple Construction
    • Low Profile
    • Physical Therapy
    • Musical Instruments
    • Computer Peripherals
    • Medical Devices
    • Gaming (Virtual Motion)
    • Robotics
  • -13%
    Out Of Stock

    Flex Sensor 4.5″

    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00. Quick View
    • Thickness: 0.4mm
    • Trigger Force: 20g, triggered (default resistance<200kΩ)
    • Pressure Measuring Range: 20g~6kg
    • Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
    • Initial Resistance: >10MΩ
    • Activation Time: <0.01S
    • Operating Temperature: -40℃~+85℃
    • Lifespan: >1million times
    • Hysteresis: +10%,(RF+ -RF-)/FR+,1000g Force
    • Response Time: <10ms
    • Drift: <5%, 2.5Kg Force, Static load 24H
  • -32%

    Force Sensitive Resistor – Small

    (0)
    Original price was: ₨1,899.00.Current price is: ₨1,299.00. Quick View

    This is a small force-sensitive resistor. It has a 0.16″ (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ.

    Two pins extend from the bottom of the sensor with a 0.1″ pitch making it breadboard-friendly.

    These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale.

  • -15%

    Force Sensitive Resistor 0.5 INCH FSR

    (0)
    Original price was: ₨1,350.00.Current price is: ₨1,150.00. Quick View
    • Detection area (detection range): 14.5 mm circle
    • Physical Diameter: 18.3mm circle
    • The output signal (output signal): Passive variable to hold
    • The Force-sensitive range (range), pressure test: 100g to 10 kg
    • Lifespan (life):> 10 m letter actuation

    Dimensions:

    • Total length: 56mm
    • Overall width: 18.3mm
    • Diameter detection: 14.5mm
    • Thickness: 0.4mm
  • -18%

    Glass Electric Mercury Tilt Switch

    (0)
    Original price was: ₨60.00.Current price is: ₨49.00. Quick View
    • Voltage: 20 V
    • Current: 300 mA
    • Operating Angle: 5o to 10o
    • Size: 5 mm
    • Length: 13 x 1 mm
    • Diameter: 4 mm to 5 mm
  • Out Of Stock

    INTRODUCTION

    This is an infrared distance switch. It has an adjustable detection range, 3cm – 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it’s sight is not adviced. It’s incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it’s back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping.

    Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It’s round shape with the screwable holders make it a good choice for a home made assembled robot, with a hole of it’s diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor.

  • -20%

    GY-273 HMC5883L Triple-axis Magnetometer Compass Module

    (0)
    Original price was: ₨750.00.Current price is: ₨599.00. Quick View
    1. Type: GY-271
    2. Operating Voltage : 3 -5 V DC.
    3. Chipset: HMC5883L.
    4. Communication: I2C protocol.
    5. Measuring range: ± 1.3-8 Gauss.
    6. Dimensions : 14.8 x 13.5 x 3.5 mm.
    7. Weight: 2 gm.
    8. 3-axis magnetic electronic compass.
    9. Precise heading information.
    10. Fits into small projects easily.
    11. I2C communication.
  • -20%

    GY-273 Magneto HMC5883L

    (0)
    Original price was: ₨750.00.Current price is: ₨599.00. Quick View
    1. Supply Voltage VCC: 3.3 to 6 V
    2. Heading Accuracy: 1 to 2
    3. Magnetic Field Range: -8 to +8 Gauss
    4. I2C Address: 0x1E (7-bit address)
    5. Max Data Rate: 160 Hz
    6. Digital Voltage Level: 3.3V
    7. Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
    8. Weight: 0.95g (0.034oz)
  • -13%

    GY-291 ADXL345 3-Axis Accelerometer Module

    (0)
    Original price was: ₨380.00.Current price is: ₨329.00. Quick View
    • Main Chip: ADXL345
    • Model: GY-291
    • Power Supply: 3-5V
    • Means of Communication: IIC / SPI Communication Protocol
    • Measuring Range: ±2g /±16g
    • Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
    • Accelerometer Normal Operating Current: 450µA
    • Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
    • Sleep Mode Current: 8µA
    • Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
    • User-Programmable Interrupts
    • Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
  • -33%
    Out Of Stock

    GY-31 TCS230 TCS3200 Color Sensor

    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,350.00. Quick View
    1. High-resolution conversion of light intensity to frequency.
    2. Chip pins all has drawn for standard 100.
    3. Put the needle (2.54 mm).
    4. Mil-convenient for bitmap board.
    5. Programmable color and full-scale output frequency.
    6. Communicate directly with a microcontroller.
    7. Low-profile surface mount package.
  • -12%

    Gy-61 Triple Axis Accelerometer Adxl335

    (1)
    Original price was: ₨1,990.00.Current price is: ₨1,749.00. Quick View
    1. 3V-6V DC Supply Voltage
    2. Onboard LDO Voltage regulator
    3. Can be interfaced with a 3V3 or 5V Microcontroller.
    4. All necessary components are populated.
    5. Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
    6. Tap/Double Tap Detection
    7. Free-Fall Detection
    8. Analog output
    9. Build in ultra-low noise linear LDO voltage regulator
    10. Built-in onboard filters, which reduce noise from the motor and other high-current electronics
    11. All sensors connected to the I2C bus
    12. You can easily select two I2C addresses for MPU6050 by soldered jumper
    13. Power LED
    14. Build in Logic level converter for I2C
    15. Dimensions 20x16mm
    16. Designed for 5V logic level
  • -19%

    GY521 MPU6050 3 Axis Digital Gyroscope Accelerometer Sensor Module

    (0)
    Original price was: ₨490.00.Current price is: ₨399.00. Quick View

    3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor. Easy to get it fit into your project! It is very accurate, as GY-521 Mpu6050 Module contains 16-bits analog to digital conversion hardware for each channel. Therefor Three axis Gyrometer captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino.

  • -27%

    GY521 MPU6050 Module 6DOF

    (0)
    Original price was: ₨550.00.Current price is: ₨399.00. Quick View
    • Chip: MPU-6050
    • Power supply: 3v-5V
    • Gyroscope range: + 250 500 1000 2000/ s
    • Acceleration range:  2  4  8  16 g
    • Communication: Standard IIC communication agreement
    • Chip built-in 16 bit AD converter, 16 bits of data output
    • Pin Pitch 2.54 mm
    • SIZE: 20.3mm x 15.6mm
  • -14%

    Hall Effect Sensor Module

    (0)
    Original price was: ₨185.00.Current price is: ₨159.00. Quick View
    1. Digital Output Hall-effect sensor.
    2. Operating voltage: typically 5V.
    3. Output Current: 25mA.
    4. It can be used to detect both the poles of a magnet.
    5. The output voltage is equal to the operating voltage.
    6. Operating temperature: -40C to 85C.
    7. Turn on and Turn off time is 2 sec each.
    8. Inbuilt reverse polarity protection.
    9. Suitable for Automotive and Industrial Applications.
  • -12%

    Hall Sensor 44E

    (0)
    Original price was: ₨180.00.Current price is: ₨159.00. Quick View
    1. 3.5V to 24V DC operation voltage
    2. Low current consumption
    3. Temperature compensation
    4. Wide operating voltage range
    5. Open-Collector pre-driver
    6. 50mA maximum sinking output current
    7. Reverse polarity protection
  • -12%

    HC-SR501 PIR Human Motion Sensor

    (0)
    Original price was: ₨260.00.Current price is: ₨229.00. Quick View
    • Wide range on input voltage varying from 4.V to 12V (+5V recommended)
    • Output voltage is High/Low (3.3V TTL)
    • Can distinguish between object movement and human movement
    • Has to operating modes – Repeatable(H) and Non- Repeatable(H)
    • Cover distance of about 120° and 7 meters
    • Low power consumption of 65mA
    • Operating temperature from -20° to +80° Celsius
  • -62%

    HCSR04 ultrasonic sensor Bracket

    (0)
    Original price was: ₨180.00.Current price is: ₨69.00. Quick View
    • Thickness: 2.8 – 3.1 mm
    • Inner diameter: 16 mm
    • Fixing Hole Diameter: 3.8 mm
    • Material: High Quality Imported Acrylic
    • Colour: Blue
    • Application: Stationary ultrasonic sensor modules and other products
  • -35%

    HCSR501 HC-SR501 PIR Sensor

    (1)
    Original price was: ₨350.00.Current price is: ₨229.00. Quick View
    • Use BISS0001 signal processing IC, sanyo genius regulator
    • Voltage: 5V  20V
    • Power Consumption: 65mA
    • TTL output: 3.3V, 0V
    • Delay time: adjustable (0.3 sec 10 minutes)
    • Lock time: 0.2 sec
    • Trigger methods: L  disable repeat trigger, H enable repeat trigger
    • Sensing range: less than 120 degree, within 7 meters
    • Temperature:  15 ~ +70
    • Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
  • -28%

    Heart Rate Monitor ECG AD8232 Module + Leads

    (0)
    Original price was: ₨2,500.00.Current price is: ₨1,799.00. Quick View
    • Supply voltage: DC 3.3V
    • Output: Analog output
    • Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
    • Size 36mm * 31mm * 18mm
    • Operating temperature: -40C  +85 C