Module

Default sorting
Show
48
  • -41%

    XBee 2mW Wire Antenna – Series 2 (ZB)

    Communication Modules
    (0)
    Original price was: ₨15,000.00.Current price is: ₨8,799.00. Quick View

    This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

  • Out Of Stock

    XBee Pro 60mW Wire Antenna

    Communication Modules
    (0)
    ₨6,799.00 Quick View

    INTRODUCTION

    This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
  • -23%

    Ph Sensor Gravity Sensor Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨7,800.00.Current price is: ₨5,999.00. Quick View
    1. Module Power: 5.00V
    2. Module Size : 43 x 32mm(1.69×1.26″)
    3. Measuring Range :0 – 14PH
    4. Measuring Temperature: 0 – 60 ℃
    5. Accuracy : ± 0.1pH (25 ℃)
    6. Response Time: ≤ 1min
    7. pH Sensor with BNC Connector
    8. pH2.0 Interface ( 3 foot patch )
    9. Gain Adjustment Potentiometer
    10. Power Indicator LED
  • -20%
    Out Of Stock

    XBee Pro 60mW PCB Antenna – Series 1

    Communication Modules
    (0)
    Original price was: ₨7,500.00.Current price is: ₨5,999.00. Quick View

    This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

  • -17%
    Out Of Stock

    XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)

    Communication Modules
    (0)
    Original price was: ₨6,000.00.Current price is: ₨4,999.00. Quick View

    This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
    This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.

  • -10%
    Out Of Stock

    GPS Arduino Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨5,350.00.Current price is: ₨4,799.00. Quick View

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -30%
    Out Of Stock

    XBee 1mW Wire Antenna

    Communication Modules
    (0)
    Original price was: ₨6,500.00.Current price is: ₨4,549.00. Quick View

    INTRODUCTION

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
  • -20%

    Xbee shield V03

    Communication Modules
    (0)
    Original price was: ₨5,000.00.Current price is: ₨3,999.00. Quick View
    This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.
    It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
  • Out Of Stock

    Telemetry 3DR TTL

    Communication Modules
    (0)
    ₨3,800.00 Quick View

    The Radio telemetry system base on 3DR Radio system and 100% compatible.

    It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. Its available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).

    The system provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.

    Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

  • -14%

    W5100 Ethernet Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨3,500.00.Current price is: ₨2,999.00. Quick View
    • Operating voltage 5V (supplied from the Arduino Board)
    • Ethernet Controller: W5100 with internal 16K buffer
    • Connection speed: 10/100Mb
    • Connection with Arduino on SPI port
    • The Shield contains a number of informational LEDs
    • PWR: indicates that the board and shield are powered
    • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
    • FULLD: indicates that the network connection is full duplex
    • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
    • RX: flashes when the shield receives data
    • TX: flashes when the shield sends data
    • TX: flashes when the shield sends data
    • COLL: flashes when network collisions are detected
  • Out Of Stock

    Arduino WiFi Shield CC3000

    Arduino & IOT Boards
    (0)
    ₨2,800.00 Quick View
    1. Based on TI CC3000 WIFI module.
    2. Use SPI communication .
    3. Integrated 3.3V regulator .
    4. Level shifter integrated .
    5. Integrated ceramic antenna .
    6. It has a connector for external antenna WIFI
    7. Compatible with Arduino UNO, Mega, Leondardo & Micro
    8. Antenna: Onboard Ceramic
    9. MicroSD card slot onboard
    10. Reset button
    11. Communication Protocol: SPI
    12. Connects via IEEE 802.11 b/g networks
    13. Tx Bandwidth: 11Mbps
    14. Tx Sensitivity: +/-18dBm
    15. Rx sensitivity: -86dBm
    16. IRQ pin for interrupts (useful for asynchronous connections)
    17. Supports WEP, WPA, WPA2, TKIP and AES
    18. TCP and UDP Client & Server Modes available
    19. Max Concurrent TCP/UDP Sockets: 4
    20. TCP/IP stack is built in.
  • Hot
    -42%

    High Quality 37 in 1 Sensor Module Board Set Kit For Arduino

    Arduino & IOT Boards
    (0)
    Original price was: ₨4,500.00.Current price is: ₨2,599.00. Quick View

    This 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • Hot
    -13%
    Out Of Stock

    37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box

    Arduino & IOT Boards
    (1)
    Original price was: ₨3,000.00.Current price is: ₨2,599.00. Quick View

    This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • Out Of Stock

    ZigBee XCore2530 1500M

    Communication Modules
    (0)
    ₨1,950.00 Quick View

    ZigBee module, features the CC2530F256 onboard, farther communication distance with PA

    Overview

    XCore2530 is a ZigBee module based on CC2530F256.

    Basically this module can be used in two aspects :

    • Develop application with the provided firmware
      Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification
    • Develop your own firmware
      In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
  • Hot
    -19%
    Out Of Stock

    UNO R3 WiFI Development Board ATmega328P

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,100.00.Current price is: ₨1,699.00. Quick View
    • Arduino UNO R3 board integrated with esp8266 module
    • Program both UNO and esp8266 separately using dip switch
    • UNO and esp8266 can communicate each other via serial by adjusting dip switch
    • Supply Voltage: 6~9V recommend
    • USB-converter: CH340G. Need to install driver software to program
    • PinOut UNO: UNO R3
    • Digital I/O Pins: 14
    • Analog I/O Pins: 6
    • Logic Level: 5V
    • Operating temperature: −40С°/+125С°
    • MCU: ATmega328
    • WiFi MCU: ESP8266
    • UNO+WiFi R3 ATmega328P+ESP8266 (4Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266
  • -15%

    16 Channel Relay Module

    Module
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,699.00. Quick View
    • Product Name: 16-Channel Relay Module
    • Number of Channels: 16
    • Control Signal voltage: 5V, active low
    • Load Voltage: AC 250V/10A, AC 125V/15A
    • DC 30V 10A
    • Input power: 12V
    • Each board needs 15-20mA Driver Current
    • I / O port driver is active in low level.
    • 1-16 channel optionally fully open/closed,
    • or any channel.
    • Standard interface that can be controlled directly by microcontroller
    • Indication LEDs for Relay output status.
    • Independent common end COM makes the relay convenient for users to access different signals.
    • Use optocoupler protection with high safety performance
    • Widely used for all MCU control, industrial sector, PLC control, smart home control.
    • Size: 8 x 5.7 x 1.2 inches
    • Weight: 8.8 ounces
  • -20%
    Out Of Stock

    xbee Shield

    Communication Modules
    (0)
    Original price was: ₨2,115.00.Current price is: ₨1,692.00. Quick View
    • 3.3V @ 50mA
    • 250kbps Max data rate
    • 1mW output (+0dBm)
    • 300ft (100m) range
    • Wire antenna
    • Fully FCC certified
    • 6 10-bit ADC input pins
    • 8 digital IO pins
    • 128-bit encryption
    • Local or over-air configuration
    • AT or API command set
  • -41%

    MAX31865 RTD PT100 Amplifier

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,700.00.Current price is: ₨1,599.00. Quick View
    • Advantage: Handling all of your RTD needs.
    • Strong point: Compensating 3 or 4-wire RTDs for better accuracy.
    • Characteristic: Could be used with any Arduino or microcontroller.
    • Feature: 3.3V regulator and level shifting.
    • Feature: Could be used with any 2, 3, or 4-wire PT100 RTD.
  • -53%

    PWM 40A DC Motor Speed Controller Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨3,200.00.Current price is: ₨1,499.00. Quick View
    This 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET connected to the individual heatsinks.

    Features: DC Motor Speed Controller Module with PWM 40 A

    • Industrial Quality Board.
    • Maximum Output Current of 40A.
    • Maximum Output Power of 2000W
    • Working Voltage From 9V to 50V.
  • -30%

    125KHz EM18 reader module EM-18 build in coil antenna

    Communication Modules
    (0)
    Original price was: ₨2,150.00.Current price is: ₨1,499.00. Quick View
    • Operating voltage of EM-18: +4.5V to +5.5V
    • Current consumption:50mA
    • Can operate on LOW power
    • Operating temperature: 0C to +80C
    • Operating frequency:125KHz
    • Communication parameter:9600bps
    • Reading distance: 10cm, depending on TAG
    • Integrated Antenna
  • -35%

    MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,299.00. Quick View
    • MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
    • A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
    • The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
    • It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
  • -8%
    Out Of Stock

    PPM Encoder

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,300.00.Current price is: ₨1,200.00. Quick View

    PPM encoder is the role of the receiver output of multiple channel PWM signal encoded into PPM composite signal output, single-wire connection to support the flight control.

  • -67%

    XH-M452 Digital Temperature Humidity Controller DC 12v

    Arduino & IOT Boards
    (4)
    Original price was: ₨3,500.00.Current price is: ₨1,149.00. Quick View
    1. Supports heating mode and cooling mode.
    2. High precision 0.1 Celsius and 0.1% RH.
    3. Real-time display of temperature and humidity.
    4. Custom load, arbitrarily selected.
    5. Simple setting.
    6. Easy installation.
    7. Power-down memory function.
    8. Model: XH-M452
    9. Input voltage: DC 12V
    10. Temperature range: -20~60 Celsius
    11. Humidity range: 00%-100% RH
    12. Detection accuracy: 0.1 Celsius 0.1% RH
    13. Detection accuracy: 0.1 Celsius
    14. Sensor: 1 Meter Temperature and humidity sensor
    15. Output Type: Relay Output (Switch Output)
    16. Size: 65x55x28mm
  • -27%

    W5500 Ethernet Network Module / Shield

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,500.00.Current price is: ₨1,099.00. Quick View
    • Operating voltage: 2.97-3.63V
    • Current draw: Typical: 128mA, Max: 200mA
    • SPI clock frequency: Max: 80MHz
    • Ethernet MAC: 10/100BASE-T
    • PHY: 10BASE-T and 100BASE-T
    • TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
    • Hardware sockets: 8
    • Internal buffer: 32KB
    • Supports: SPI, WOL, and power down mode
  • -27%
    CCM5D Motor PWM Speed Controller With Digital LED Display

    PWM DC Motor Speed Controller 8A With Display

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨1,099.00. Quick View
    1. Suitable for motors with voltage: 12 and 24V
    2. The total range of permissible tension: 6V to 30V DC
    3. Output current: Rated current 5A (8A max short term)
    4. PWM frequency: 16 kHz
    5. Adjustable PWM duty cycle : 0% -100%
    6. LED Digital display showing the duty cycle
    7. The dimensions of the regulator are 7.8 x 4.2 x 2.5 cm
  • -42%

    SIM800L GSM Module Micro Sim Card Board

    Communication Modules
    (0)
    Original price was: ₨1,799.00.Current price is: ₨1,049.00. Quick View
    • Module models: SIM800L (latest module, performance than SIM900)
    • Operating voltage: 3.7 to 4.2 V (peak current is 2A)
    • Support network: China mobile, China Unicom
    • Module size: 2.2 x 1.8cm
    • TTL serial port can directly link to MCU. Don’t need a MAX232
    • Power on automatic startup, automatic search network
    • Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
  • -55%

    GPS Neo 6m U-Blox NEO-6M GPS Module

    Communication Modules
    (0)
    Original price was: ₨1,999.00.Current price is: ₨899.00. Quick View
    • 5Hz position update rate
    • Operating temperature range: -40 TO 85C UART TTL socket
    • EEPROM to save configuration settings
    • Rechargeable battery for Backup
    • The cold start time of 38 s and Hot start time of 1 s
    • Supply voltage: 3.3 V
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
    • Separate GPS antenna
  • -49%
    DC 10-60V 20A PWM Universal Motor Speed Controller Regulator

    20A PWM DC Motor Speed Controller Regulator

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,650.00.Current price is: ₨849.00. Quick View
    • Working Voltage: DC 10V – 60V
    • Control Power: 0.01-1200W
    • Static Current: 0.010A (Standby)
    • Rated Current: 15A
    • Max.Current: 20A
    • PWM Duty Cycle: 0% -100%
    • PWM Frequency: 25 kHz
    • Control Voltage: 0-5V
      • Potentiometer kind: Single turn
      • Resistance: 10k
      • Power: 125mW
      • Mounting: On cable
      • Characteristics: Linear
      • Body material: Metal
      • Mechanical rotation angle: 300
      • Max. operating voltage: 200V
    • Material: Plastic, metal
    • Module Size: 77x45x29mm
  • -11%
    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module

    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module

    Module
    (0)
    Original price was: ₨900.00.Current price is: ₨799.00. Quick View
    1. Imported high-quality double-sided compact PCB.
    2. Opto-isolated inputs mean your digital electronics are safe and noise-free.
    3. This relay module is 5V active low.
    4. It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
    5. It is also able to control various appliances and other equipment with a large current.
    6. 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
    7. The standard interface can be directly connected with microcontrollers.
    8. Red working status indicator lights are conducive to safe use.
    9. Widely used for all MCU control, industrial sector, PLC control, and smart home control.
  • -16%
    Out Of Stock

    Lillypad

    Arduino & IOT Boards
    (0)
    Original price was: ₨900.00.Current price is: ₨760.00. Quick View

    LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.

  • -45%

    HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,350.00.Current price is: ₨749.00. Quick View
    • Working frequency: 433.4MHz to 473.0MHz
    • Supply voltage: 3.2V to 5.5VDC
    • Communication distance: 1,000m in the open space
    • Serial baud rate: 1.2Kbps to 115.2Kbps（default 9.6Kbps）
    • Receiving sensitivity: -117dBm to -100dBm
    • Transmit power: -1dBm to 20dBm
    • Interface protocol: UART/TTL
    • Operating temperature: -40℃ to +85℃
    • Dimensions: 27.8mm x 14.4mm x 4mm
  • -32%

    ADS1115 Analog-to-Digital Converter

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,100.00.Current price is: ₨749.00. Quick View
    • WIDE SUPPLY RANGE: 2.0V to 5.5V
    • LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
    • PROGRAMMABLE DATA RATE: 8SPS to 860SPS
    • INTERNAL LOW-DRIFT VOLTAGE REFERENCE
    • INTERNAL OSCILLATOR
    • INTERNAL PGA
    • I2C INTERFACE: Pin-Selectable Addresses
    • FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
    • PROGRAMMABLE COMPARATOR
    • This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
  • -52%
    Out Of Stock

    MAX6675 Module + K Type Thermocouple

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨719.00. Quick View
    • Thermocouple temperature range: 0 to 450 °C
    • Module sensor temperature range (°C): 0 to 1024
    • Temperature resolution (°C): 0.25
    • Module supply voltage: 3 to 5.5 V
    • Module current: 50mA
    • Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible
    • Termocouple accuracy (0-700°C): 8 LSBs
    • Termocouple disconnect detection
  • -26%

    HC-05 Bluetooth Module

    Bluetooth
    (1)
    Original price was: ₨950.00.Current price is: ₨699.00. Quick View

    The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.

  • -13%

    RFID RDM 6300

    Communication Modules
    (0)
    Original price was: ₨800.00.Current price is: ₨699.00. Quick View
    • Operating frequency: 125 kHz
    • Baud rate: 9600
    • Interface: TTL level RS232 format
    • Working voltage: DC 5V
    • Working current: <50mA
    • Receive distance: 20~50mm
    • Dimension (mm): 38.5 x 20
    • Weight: 7g
  • -36%
    PWM 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator

    PWM controller DC Motor speed controller 12V-40V 10A

    Arduino & IOT Boards
    (0)
    Original price was: ₨999.00.Current price is: ₨639.00. Quick View
    • Input Voltage: DC 12V-40V
    • Control Power: 0.01-400W
    • Rated Current: 8A
    • Maximum Current: 10A
    • Static Current: 0.02A(standby status)
    • Frequency: 13kHz
    • Speed Adjustment Range: 10%-100%
    • Hole Diameter: 3.2mm
    • Operating Temperature: -20C~125C
    • Dimensions: 75*60*28mm / 2.95*2.36*1.10in
    • Package Weight: Approx. 73g/2.6oz
  • -37%

    AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3

    Arduino & IOT Boards
    (0)
    Original price was: ₨950.00.Current price is: ₨599.00. Quick View
    1. Ultra Low Standby Power 90uA ~ 400uA
    2. Communication Distance Range : 100 ft / 60mtr
    3. Super Fast Reaction Speed : 0.4 Sec.
    4. Built-in PCB antena
    5. Power Input : 3.6V To 6V DC (Cannot higher than 6V)
    6. Size : 43 X 15 mm
    7. Color : Blue
    8. Net weight : 4g
  • -25%

    NRF24L01 Antenna Pair

    Communication Modules
    (0)
    Original price was: ₨799.00.Current price is: ₨599.00. Quick View

    This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.

  • -54%
    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,200.00.Current price is: ₨549.00. Quick View
    1. Voltage: 3-3.6V (recommended 3.3V) V.
    2. Maximum output power: +20dBm.
    3. Emission mode current(peak): 115mA.
    4. Receive Mode Current(peak): 45mA.
    5. Power-down mode current: 4.2uA.
    6. Sensitivity 2Mbps mode in received: -92dBm.
    7. Sensitivity 1Mbps mode in received: -95dBm.
    8. PA gain: 20DbLNA gain: 10Db.
    9. Sensitivity 250kbps mode in received: -104dBm.
    10. Operating Range: 1 km
    11. LNA Noise figure: 2.6 Db.
    12. Antenna Gain (peak): 2Dbi.
    13. 2MB rate (Open area): 520m.
    14. 1MB rate (Open area): 750m.
    15. 250Kb rate (Open area): 1100m.
    16. Interface: SPI.
  • -35%

    HC-06 Bluetooth Module

    Bluetooth
    (0)
    Original price was: ₨850.00.Current price is: ₨549.00. Quick View

    HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.

  • -23%
    Out Of Stock

    Sim 800A GSM

    Communication Modules
    (0)
    Original price was: ₨650.00.Current price is: ₨500.00. Quick View

    The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption

  • -18%
    Out Of Stock

    Relay Module 4 channel

    Module
    (0)
    Original price was: ₨599.00.Current price is: ₨489.00. Quick View
    1. Output controllable: Digital
    2. Compatible: With any 5V microcontroller such as Arduino.
    3. Rated through-current: 10A (NO) 5A (NC)
    4. Control signal: TTL level
    5. Max. switching voltage: 250VAC/30VDC
    6. Max. switching current: 10A
    7. Size: 76mm x 56mm x 17mm
  • -8%
    Out Of Stock

    CJMCU-4051 74HC4051 8 Channel Analog Multiplexer Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨520.00.Current price is: ₨480.00. Quick View
    • Wide analog input voltage range from -5 V to +5 V
    • Complies with JEDEC standard no. 7A
    • Low ON resistance:
    • 80 ohm(typical) at VCC -VEE = 4.5 V
    • 70 ohm(typical) at VCC -VEE = 6.0 V
    • 60 ohm(typical) at VCC -VEE = 9.0 V
    • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
    • Typical break before make built-in
    • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
    • Multiple package options
    • Specified from -40 to +85 and -40 to +125
  • -22%

    Light Sensitive LDR Relay Module 12V

    Module
    (1)
    Original price was: ₨600.00.Current price is: ₨469.00. Quick View
    • Automatically controls the relay based on light intensity
    • Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
    • Adjustable light level set-point
    • Controls loads of 115/230VAC @ 10A
    • Controls loads of 0  15VDC @ 10A
    • Both NO (Normally Open) and NC (Normally Closed) contacts
    • LED indicator when the relay is energized
    • 12V power operation
  • -56%

    2000W PWM AC Motor Speed Control Module Dimmer

    Arduino & IOT Boards
    (0)
    Original price was: ₨900.00.Current price is: ₨399.00. Quick View
    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃
  • -27%

    8×8 Dot Matrix MAX7219 MCU Control Display Generic Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨550.00.Current price is: ₨399.00. Quick View
    • Operating Voltage: 4.7V  5.3V
    • Operating Current: 320mA
    • Max Operating Current: 2A
    • Display type: LED
    • Mounting: THT
    • Display type: Matrix
    • Display resolution: 8×8
    • Color: Red
    • Common electrode: Cathode
  • -26%

    L298N Motor Driver Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨500.00.Current price is: ₨369.00. Quick View
    • Driver Model: L298N 2A
    • Driver Chip: Double H Bridge L298N
    • Motor Supply Voltage (Maximum): 46V
    • Motor Supply Current (Maximum): 2A
    • Logic Voltage: 5V
    • Driver Voltage: 5-35V
    • Driver Current:2A
    • Logical Current:0-36mA
    • Maximum Power (W): 25W
    • Current Sense for each motor
    • Heatsink for better performance
    • Power-On LED indicator
  • -10%

    A3967 Stepper Motor Driver Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨400.00.Current price is: ₨360.00. Quick View

    This EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.