Module

Default sorting
Show
48
  • -55%

    GPS Neo 6m U-Blox NEO-6M GPS Module

    Communication Modules
    (0)
    Original price was: ₨1,999.00.Current price is: ₨899.00. Quick View
    • 5Hz position update rate
    • Operating temperature range: -40 TO 85C UART TTL socket
    • EEPROM to save configuration settings
    • Rechargeable battery for Backup
    • The cold start time of 38 s and Hot start time of 1 s
    • Supply voltage: 3.3 V
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
    • Separate GPS antenna
  • -42%

    SIM800L GSM Module Micro Sim Card Board

    Communication Modules
    (0)
    Original price was: ₨1,799.00.Current price is: ₨1,049.00. Quick View
    • Module models: SIM800L (latest module, performance than SIM900)
    • Operating voltage: 3.7 to 4.2 V (peak current is 2A)
    • Support network: China mobile, China Unicom
    • Module size: 2.2 x 1.8cm
    • TTL serial port can directly link to MCU. Don’t need a MAX232
    • Power on automatic startup, automatic search network
    • Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
  • -27%
    CCM5D Motor PWM Speed Controller With Digital LED Display

    PWM DC Motor Speed Controller 8A With Display

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨1,099.00. Quick View
    1. Suitable for motors with voltage: 12 and 24V
    2. The total range of permissible tension: 6V to 30V DC
    3. Output current: Rated current 5A (8A max short term)
    4. PWM frequency: 16 kHz
    5. Adjustable PWM duty cycle : 0% -100%
    6. LED Digital display showing the duty cycle
    7. The dimensions of the regulator are 7.8 x 4.2 x 2.5 cm
  • -27%

    W5500 Ethernet Network Module / Shield

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,500.00.Current price is: ₨1,099.00. Quick View
    • Operating voltage: 2.97-3.63V
    • Current draw: Typical: 128mA, Max: 200mA
    • SPI clock frequency: Max: 80MHz
    • Ethernet MAC: 10/100BASE-T
    • PHY: 10BASE-T and 100BASE-T
    • TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
    • Hardware sockets: 8
    • Internal buffer: 32KB
    • Supports: SPI, WOL, and power down mode
  • -67%

    XH-M452 Digital Temperature Humidity Controller DC 12v

    Arduino & IOT Boards
    (4)
    Original price was: ₨3,500.00.Current price is: ₨1,149.00. Quick View
    1. Supports heating mode and cooling mode.
    2. High precision 0.1 Celsius and 0.1% RH.
    3. Real-time display of temperature and humidity.
    4. Custom load, arbitrarily selected.
    5. Simple setting.
    6. Easy installation.
    7. Power-down memory function.
    8. Model: XH-M452
    9. Input voltage: DC 12V
    10. Temperature range: -20~60 Celsius
    11. Humidity range: 00%-100% RH
    12. Detection accuracy: 0.1 Celsius 0.1% RH
    13. Detection accuracy: 0.1 Celsius
    14. Sensor: 1 Meter Temperature and humidity sensor
    15. Output Type: Relay Output (Switch Output)
    16. Size: 65x55x28mm
  • -8%
    Out Of Stock

    PPM Encoder

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,300.00.Current price is: ₨1,200.00. Quick View

    PPM encoder is the role of the receiver output of multiple channel PWM signal encoded into PPM composite signal output, single-wire connection to support the flight control.

  • -35%

    MAX7219 Dot LED Matrix 4×1 Module MCU Control Unit

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,299.00. Quick View
    • MAX7219 is an integrated serial input / output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
    • A convenient four-wire serial interface can be connected to all general-purpose microprocessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
    • The entire device contains a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
    • It requires only three IO ports to drive a dot matrix! No flicker when the dot matrix display! Support cascading!
  • -30%

    125KHz EM18 reader module EM-18 build in coil antenna

    Communication Modules
    (0)
    Original price was: ₨2,150.00.Current price is: ₨1,499.00. Quick View
    • Operating voltage of EM-18: +4.5V to +5.5V
    • Current consumption:50mA
    • Can operate on LOW power
    • Operating temperature: 0C to +80C
    • Operating frequency:125KHz
    • Communication parameter:9600bps
    • Reading distance: 10cm, depending on TAG
    • Integrated Antenna
  • -53%

    PWM 40A DC Motor Speed Controller Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨3,200.00.Current price is: ₨1,499.00. Quick View
    This 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V is used to control the speed of DC motors from 9V to 50V with a maximum power of 2000W this controller can provide up to 40A of current depending on the power supply. The board comes with a protective housing made from ABS plastic. The controller has 6 high-quality NCE7190A MOSFET connected to the individual heatsinks.

    Features: DC Motor Speed Controller Module with PWM 40 A

    • Industrial Quality Board.
    • Maximum Output Current of 40A.
    • Maximum Output Power of 2000W
    • Working Voltage From 9V to 50V.
  • -41%

    MAX31865 RTD PT100 Amplifier

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,700.00.Current price is: ₨1,599.00. Quick View
    • Advantage: Handling all of your RTD needs.
    • Strong point: Compensating 3 or 4-wire RTDs for better accuracy.
    • Characteristic: Could be used with any Arduino or microcontroller.
    • Feature: 3.3V regulator and level shifting.
    • Feature: Could be used with any 2, 3, or 4-wire PT100 RTD.
  • -20%
    Out Of Stock

    xbee Shield

    Communication Modules
    (0)
    Original price was: ₨2,115.00.Current price is: ₨1,692.00. Quick View
    • 3.3V @ 50mA
    • 250kbps Max data rate
    • 1mW output (+0dBm)
    • 300ft (100m) range
    • Wire antenna
    • Fully FCC certified
    • 6 10-bit ADC input pins
    • 8 digital IO pins
    • 128-bit encryption
    • Local or over-air configuration
    • AT or API command set
  • -15%

    16 Channel Relay Module

    Module
    (0)
    Original price was: ₨2,000.00.Current price is: ₨1,699.00. Quick View
    • Product Name: 16-Channel Relay Module
    • Number of Channels: 16
    • Control Signal voltage: 5V, active low
    • Load Voltage: AC 250V/10A, AC 125V/15A
    • DC 30V 10A
    • Input power: 12V
    • Each board needs 15-20mA Driver Current
    • I / O port driver is active in low level.
    • 1-16 channel optionally fully open/closed,
    • or any channel.
    • Standard interface that can be controlled directly by microcontroller
    • Indication LEDs for Relay output status.
    • Independent common end COM makes the relay convenient for users to access different signals.
    • Use optocoupler protection with high safety performance
    • Widely used for all MCU control, industrial sector, PLC control, smart home control.
    • Size: 8 x 5.7 x 1.2 inches
    • Weight: 8.8 ounces
  • Hot
    -19%
    Out Of Stock

    UNO R3 WiFI Development Board ATmega328P

    Arduino & IOT Boards
    (0)
    Original price was: ₨2,100.00.Current price is: ₨1,699.00. Quick View
    • Arduino UNO R3 board integrated with esp8266 module
    • Program both UNO and esp8266 separately using dip switch
    • UNO and esp8266 can communicate each other via serial by adjusting dip switch
    • Supply Voltage: 6~9V recommend
    • USB-converter: CH340G. Need to install driver software to program
    • PinOut UNO: UNO R3
    • Digital I/O Pins: 14
    • Analog I/O Pins: 6
    • Logic Level: 5V
    • Operating temperature: −40С°/+125С°
    • MCU: ATmega328
    • WiFi MCU: ESP8266
    • UNO+WiFi R3 ATmega328P+ESP8266 (4Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266
  • Out Of Stock

    ZigBee XCore2530 1500M

    Communication Modules
    (0)
    ₨1,950.00 Quick View

    ZigBee module, features the CC2530F256 onboard, farther communication distance with PA

    Overview

    XCore2530 is a ZigBee module based on CC2530F256.

    Basically this module can be used in two aspects :

    • Develop application with the provided firmware
      Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification
    • Develop your own firmware
      In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
  • Hot
    -13%
    Out Of Stock

    37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box

    Arduino & IOT Boards
    (1)
    Original price was: ₨3,000.00.Current price is: ₨2,599.00. Quick View

    This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • Hot
    -42%

    High Quality 37 in 1 Sensor Module Board Set Kit For Arduino

    Arduino & IOT Boards
    (0)
    Original price was: ₨4,500.00.Current price is: ₨2,599.00. Quick View

    This 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • Out Of Stock

    Arduino WiFi Shield CC3000

    Arduino & IOT Boards
    (0)
    ₨2,800.00 Quick View
    1. Based on TI CC3000 WIFI module.
    2. Use SPI communication .
    3. Integrated 3.3V regulator .
    4. Level shifter integrated .
    5. Integrated ceramic antenna .
    6. It has a connector for external antenna WIFI
    7. Compatible with Arduino UNO, Mega, Leondardo & Micro
    8. Antenna: Onboard Ceramic
    9. MicroSD card slot onboard
    10. Reset button
    11. Communication Protocol: SPI
    12. Connects via IEEE 802.11 b/g networks
    13. Tx Bandwidth: 11Mbps
    14. Tx Sensitivity: +/-18dBm
    15. Rx sensitivity: -86dBm
    16. IRQ pin for interrupts (useful for asynchronous connections)
    17. Supports WEP, WPA, WPA2, TKIP and AES
    18. TCP and UDP Client & Server Modes available
    19. Max Concurrent TCP/UDP Sockets: 4
    20. TCP/IP stack is built in.
  • -14%

    W5100 Ethernet Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨3,500.00.Current price is: ₨2,999.00. Quick View
    • Operating voltage 5V (supplied from the Arduino Board)
    • Ethernet Controller: W5100 with internal 16K buffer
    • Connection speed: 10/100Mb
    • Connection with Arduino on SPI port
    • The Shield contains a number of informational LEDs
    • PWR: indicates that the board and shield are powered
    • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
    • FULLD: indicates that the network connection is full duplex
    • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
    • RX: flashes when the shield receives data
    • TX: flashes when the shield sends data
    • TX: flashes when the shield sends data
    • COLL: flashes when network collisions are detected
  • Out Of Stock

    Telemetry 3DR TTL

    Communication Modules
    (0)
    ₨3,800.00 Quick View

    The Radio telemetry system base on 3DR Radio system and 100% compatible.

    It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. Its available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).

    The system provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.

    Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

  • -20%

    Xbee shield V03

    Communication Modules
    (0)
    Original price was: ₨5,000.00.Current price is: ₨3,999.00. Quick View
    This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.
    It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
  • -30%
    Out Of Stock

    XBee 1mW Wire Antenna

    Communication Modules
    (0)
    Original price was: ₨6,500.00.Current price is: ₨4,549.00. Quick View

    INTRODUCTION

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
  • -10%
    Out Of Stock

    GPS Arduino Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨5,350.00.Current price is: ₨4,799.00. Quick View

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -17%
    Out Of Stock

    XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)

    Communication Modules
    (0)
    Original price was: ₨6,000.00.Current price is: ₨4,999.00. Quick View

    This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
    This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.

  • -20%
    Out Of Stock

    XBee Pro 60mW PCB Antenna – Series 1

    Communication Modules
    (0)
    Original price was: ₨7,500.00.Current price is: ₨5,999.00. Quick View

    This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

  • -23%

    Ph Sensor Gravity Sensor Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨7,800.00.Current price is: ₨5,999.00. Quick View
    1. Module Power: 5.00V
    2. Module Size : 43 x 32mm(1.69×1.26″)
    3. Measuring Range :0 – 14PH
    4. Measuring Temperature: 0 – 60 ℃
    5. Accuracy : ± 0.1pH (25 ℃)
    6. Response Time: ≤ 1min
    7. pH Sensor with BNC Connector
    8. pH2.0 Interface ( 3 foot patch )
    9. Gain Adjustment Potentiometer
    10. Power Indicator LED
  • Out Of Stock

    XBee Pro 60mW Wire Antenna

    Communication Modules
    (0)
    ₨6,799.00 Quick View

    INTRODUCTION

    This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
  • -41%

    XBee 2mW Wire Antenna – Series 2 (ZB)

    Communication Modules
    (0)
    Original price was: ₨15,000.00.Current price is: ₨8,799.00. Quick View

    This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.