Module

Default sorting
Show
48
  • -48%
    Quick View

    1 Channel Relay Module

    Original price was: ₨250.00.Current price is: ₨129.00.
    • VCC: Power interface,5V
    • GND: Ground
    • IN: Control interface.
    • Drive Current: At least 4mA
    • COM: Control circuit ground, connect to GND
    • Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
    • Weight: Approx. 12g
  • -13%
    Quick View

    125KHz EM18 reader module EM-18 build in coil antenna

    Original price was: ₨1,499.00.Current price is: ₨1,299.00.
    • Operating voltage of EM-18: +4.5V to +5.5V
    • Current consumption:50mA
    • Can operate on LOW power
    • Operating temperature: 0C to +80C
    • Operating frequency:125KHz
    • Communication parameter:9600bps
    • Reading distance: 10cm, depending on TAG
    • Integrated Antenna
  • -15%
    Quick View

    16 Channel Relay Module

    Original price was: ₨2,000.00.Current price is: ₨1,699.00.
    • Product Name: 16-Channel Relay Module
    • Number of Channels: 16
    • Control Signal voltage: 5V, active low
    • Load Voltage: AC 250V/10A, AC 125V/15A
    • DC 30V 10A
    • Input power: 12V
    • Each board needs 15-20mA Driver Current
    • I / O port driver is active in low level.
    • 1-16 channel optionally fully open/closed,
    • or any channel.
    • Standard interface that can be controlled directly by microcontroller
    • Indication LEDs for Relay output status.
    • Independent common end COM makes the relay convenient for users to access different signals.
    • Use optocoupler protection with high safety performance
    • Widely used for all MCU control, industrial sector, PLC control, smart home control.
    • Size: 8 x 5.7 x 1.2 inches
    • Weight: 8.8 ounces
  • -7%
    Quick View

    2000W PWM AC Motor Speed Control Module Dimmer

    Original price was: ₨900.00.Current price is: ₨840.00.
    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃
  • -15%
    DC 10-60V 20A PWM Universal Motor Speed Controller Regulator
    Quick View

    20A PWM DC Motor Speed Controller Regulator

    Original price was: ₨1,650.00.Current price is: ₨1,399.00.
    • Working Voltage: DC 10V – 60V
    • Control Power: 0.01-1200W
    • Static Current: 0.010A (Standby)
    • Rated Current: 15A
    • Max.Current: 20A
    • PWM Duty Cycle: 0% -100%
    • PWM Frequency: 25 kHz
    • Control Voltage: 0-5V
      • Potentiometer kind: Single turn
      • Resistance: 10k
      • Power: 125mW
      • Mounting: On cable
      • Characteristics: Linear
      • Body material: Metal
      • Mechanical rotation angle: 300
      • Max. operating voltage: 200V
    • Material: Plastic, metal
    • Module Size: 77x45x29mm
  • -17%
    Quick View

    2Channel Relay Module

    Original price was: ₨300.00.Current price is: ₨249.00.
    1. 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
    2. Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
    3. Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
    4. Opto-isolated inputs
    5. Indication LED’s for Relay output status
  • Hot
    -13%
    Quick View

    37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box

    Original price was: ₨3,000.00.Current price is: ₨2,599.00.

    This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • -29%
    Quick View

    4 Bits TM1637 Digital Tube LED 7 Segments Display Module

    Original price was: ₨350.00.Current price is: ₨249.00.

    4 Bits TM1637 Digital Tube LED 7 Segments Display Module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.

  • -43%
    Quick View

    5A Mini DC Motor PWM Speed Controller Module

    Original price was: ₨350.00.Current price is: ₨199.00.

    DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer available at best price in Pakistan at Electronation Pakistan

    • Working voltage: DC4.5V-35V
    • Output current: 0-5A
    • Output power: 90W (MAX)
    • Quiescent current: 7u A(standby mode)
    • PWM duty ratio: 1%-100%
    • PWM frequency: 20khz
    • Size: 30*26mm
    • Color: multicolor
    • Material: electric components
  • -11%
    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
    Quick View

    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module

    Original price was: ₨900.00.Current price is: ₨799.00.
    1. Imported high-quality double-sided compact PCB.
    2. Opto-isolated inputs mean your digital electronics are safe and noise-free.
    3. This relay module is 5V active low.
    4. It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
    5. It is also able to control various appliances and other equipment with a large current.
    6. 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
    7. The standard interface can be directly connected with microcontrollers.
    8. Red working status indicator lights are conducive to safe use.
    9. Widely used for all MCU control, industrial sector, PLC control, and smart home control.
  • -37%
    Quick View

    8×8 Dot Matrix MAX7219 MCU Control Display Generic Module

    Original price was: ₨550.00.Current price is: ₨349.00.
    • Operating Voltage: 4.7V  5.3V
    • Operating Current: 320mA
    • Max Operating Current: 2A
    • Display type: LED
    • Mounting: THT
    • Display type: Matrix
    • Display resolution: 8×8
    • Color: Red
    • Common electrode: Cathode
  • -10%
    Quick View

    A3967 Stepper Motor Driver Module

    Original price was: ₨400.00.Current price is: ₨360.00.

    This EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.

  • -9%
    Quick View

    ADS1115 Analog-to-Digital Converter

    Original price was: ₨600.00.Current price is: ₨549.00.
    • WIDE SUPPLY RANGE: 2.0V to 5.5V
    • LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
    • PROGRAMMABLE DATA RATE: 8SPS to 860SPS
    • INTERNAL LOW-DRIFT VOLTAGE REFERENCE
    • INTERNAL OSCILLATOR
    • INTERNAL PGA
    • I2C INTERFACE: Pin-Selectable Addresses
    • FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
    • PROGRAMMABLE COMPARATOR
    • This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
  • -24%
    Quick View

    Analog/Digital LDR Module

    Original price was: ₨250.00.Current price is: ₨190.00.
    • LDR module 4 PIN
    • Operating voltage 3.3V-5V
    • Signal output indicator light.
    • LDR module 4 PIN
    • Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
  • -11%
    Quick View

    Arduino 28BYJ48 Stepper Motor

    Original price was: ₨440.00.Current price is: ₨390.00.

    Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:

  • -10%
    Quick View

    Arduino SD Card Reader Module

    Original price was: ₨220.00.Current price is: ₨199.00.
    • Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
    • The level conversion circuit board that can interface level is 5V or 3.3V\
    • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
    • Communication interface is a standard SPI interface
    • 4 M2 screw positioning holes for easy installation
    • Size: 4.1 x 2.4cm
  • -15%
    Quick View

    Arduino Sensor Shield

    Original price was: ₨350.00.Current price is: ₨299.00.
    • It has a Pin 13 LED pilot.
    • It has D0-D13 IO ports.
    • A0-A5 analog IO ports.
    • It contains a reset button.
    • It also contains a Power LED.
    • It has an SD card interface.
    • It contains an Ultrasonic interface.
    • This expansion board has an RS232 interface.
    • It has a Bluetooth interface.
    • It has an APC220 interface.
    • IIC interface.
    • 12864 LCD Parallel interfaces.
    • It contains 12864 LCD Serial Interface
  • Quick View

    Arduino WiFi Shield CC3000

    ₨2,800.00
    1. Based on TI CC3000 WIFI module.
    2. Use SPI communication .
    3. Integrated 3.3V regulator .
    4. Level shifter integrated .
    5. Integrated ceramic antenna .
    6. It has a connector for external antenna WIFI
    7. Compatible with Arduino UNO, Mega, Leondardo & Micro
    8. Antenna: Onboard Ceramic
    9. MicroSD card slot onboard
    10. Reset button
    11. Communication Protocol: SPI
    12. Connects via IEEE 802.11 b/g networks
    13. Tx Bandwidth: 11Mbps
    14. Tx Sensitivity: +/-18dBm
    15. Rx sensitivity: -86dBm
    16. IRQ pin for interrupts (useful for asynchronous connections)
    17. Supports WEP, WPA, WPA2, TKIP and AES
    18. TCP and UDP Client & Server Modes available
    19. Max Concurrent TCP/UDP Sockets: 4
    20. TCP/IP stack is built in.
  • -8%
    Quick View

    CJMCU-4051 74HC4051 8 Channel Analog Multiplexer Module

    Original price was: ₨520.00.Current price is: ₨480.00.
    • Wide analog input voltage range from -5 V to +5 V
    • Complies with JEDEC standard no. 7A
    • Low ON resistance:
    • 80 ohm(typical) at VCC -VEE = 4.5 V
    • 70 ohm(typical) at VCC -VEE = 6.0 V
    • 60 ohm(typical) at VCC -VEE = 9.0 V
    • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
    • Typical break before make built-in
    • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
    • Multiple package options
    • Specified from -40 to +85 and -40 to +125
  • -30%
    Quick View

    DS1302 RTC Module

    Original price was: ₨400.00.Current price is: ₨279.00.
    • The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
    • 318 temporary data storage RAM
    • Working current of 2.0V, less than 300nA
    • Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
    • 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
    • Simple 3 wire interface
    • Compatible with TTL Vcc=5V
    • Double power supply pipe for main power and backup power supply.
  • -39%
    DS1307 RTC REAL TIME CLOCK MODULE
    Quick View

    DS1307 RTC REAL TIME CLOCK MODULE

    Original price was: ₨390.00.Current price is: ₨239.00.

    DS1307 RTC REAL TIME CLOCK MODULE which adopts the I2C protocol to communicate with SCM, and there was this kind of interface on Arduino, therefore is very convenient to link with each other. DS1307 has a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break-off, but be careful when you use it to take some kind of high-power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually, we will only use the I2C interface to realize the basic set of the clock/read function. Note, that this module must be installed on the battery and can work normally. The battery is button batteries (type CR2032 will be better), the positive upward:

  • -14%
    Quick View

    DS3231 REAL TIME CLOCK MODULE – RTC

    Original price was: ₨1,099.00.Current price is: ₨949.00.
    • Size: 38mm (length) * 22mm (W) * 14mm (height)
    • Operating voltage: 3.3 – 5 .5 V
    • DS3231M at the core
    • Clock Accuracy: 5ppm 0-40 C
    • Two programmable alarms
    • Programmable square-wave output
    • DS3231M Datasheet
    • LIR2032 / CR2032 backup battery holder for uninterrupted time management (battery not included)
    • Wiring instructions (with Arduino Uno R3 for example):
    • SCL A5
    • SDA A4
    • VCC 5V
    • GND GND
  • -20%
    Quick View

    Dual-axis XY Joystick Module for Arduino

    Original price was: ₨230.00.Current price is: ₨185.00.
    • Dimensions: 40 x 27 x 15 (LxWxH) mm
    • Weight: 10gm (without Hat).
    • 2.54mm pin interface leads
    • Operating Voltage: 5V.
    • Long service life and stable performance
    • Standard interface and electronic building blocks
    • Widely use in Arduino DIY projects
    • Cross rocker as a two-way 10K resistor, with the rocker in a different direction
  • -10%
    Quick View

    GPS Arduino Shield

    Original price was: ₨5,350.00.Current price is: ₨4,799.00.

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

  • -55%
    Quick View

    GPS Neo 6m U-Blox NEO-6M GPS Module

    Original price was: ₨1,999.00.Current price is: ₨899.00.
    • 5Hz position update rate
    • Operating temperature range: -40 TO 85C UART TTL socket
    • EEPROM to save configuration settings
    • Rechargeable battery for Backup
    • The cold start time of 38 s and Hot start time of 1 s
    • Supply voltage: 3.3 V
    • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
    • Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
    • Separate GPS antenna
  • -16%
    Quick View

    HC-05 Bluetooth Module

    Original price was: ₨950.00.Current price is: ₨799.00.

    The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.

  • -18%
    Quick View

    HC-06 Bluetooth Module

    Original price was: ₨850.00.Current price is: ₨699.00.

    HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.

  • Hot
    -13%
    Quick View

    High Quality 37 in 1 Sensor Module Board Set Kit For Arduino

    Original price was: ₨3,200.00.Current price is: ₨2,799.00.

    This 37 in 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

    It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

    Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

  • -20%
    Quick View

    Joystick Module

    Original price was: ₨250.00.Current price is: ₨199.00.
    1. Dimensions: 40 x 27 x 15 (LxWxH) mm
    2. Weight: 10gm (without Hat).
    3. 2.54mm pin interface leads
    4. Operating Voltage: 5V.
    5. Long service life and stable performance
    6. Standard interface and electronic building blocks
    7. Widely use in Arduino DIY projects
    8. Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
  • -26%
    Quick View

    KY-009 RGB LED SMD module

    Original price was: ₨200.00.Current price is: ₨149.00.
    • Using 5050 full-color LED.
    • RGB tricolour current一limiting resistance to prevent burnout.
    • Through the PWM adjusting three primary colors can be mixed to obtain different colors.
    • With a variety of single一chip interfaces.
    • Working Voltage: 5V.
    • LED Drive Mode: Common cathode driver.
  • -45%
    Quick View

    KY-021 Mini Magnetic Reed Module for Arduino

    Original price was: ₨270.00.Current price is: ₨149.00.
    • Operating voltage: 3.3V to 5V
    • Output type: Digital
    • Dimensions: 20 x 15 x 7mm
    • Input voltage: 3.3~5v
    • Weight: 1.2g
    • Reed switch: Normally open
    • Reed switch sensitivity: 30 gauss
    • Operating temperature: -20°C to 85°C
    • Storage temperature: -40°C to 125°C
  • -16%
    Quick View

    L298N Motor Driver Module

    Original price was: ₨500.00.Current price is: ₨419.00.
    • Driver Model: L298N 2A
    • Driver Chip: Double H Bridge L298N
    • Motor Supply Voltage (Maximum): 46V
    • Motor Supply Current (Maximum): 2A
    • Logic Voltage: 5V
    • Driver Voltage: 5-35V
    • Driver Current:2A
    • Logical Current:0-36mA
    • Maximum Power (W): 25W
    • Current Sense for each motor
    • Heatsink for better performance
    • Power-On LED indicator
  • -24%
    Quick View

    LCD I2C Module IIC/I2C Serial Interface Adapter

    Original price was: ₨250.00.Current price is: ₨189.00.
    • Operating Voltage: 5V
    • Backlight and Contrast is adjusted by potentiometer
    • Serial I2C control of LCD display using PCF8574
    • Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
    • Compatible for 16×2 LCD
    • This is another great IIC/I2C/TWI/SPI Serial Interface
    • With this I2C interface module, you will be able to realize data display via only 2 wires.
  • -22%
    Quick View

    Light Sensitive LDR Relay Module 12V

    Original price was: ₨600.00.Current price is: ₨469.00.
    • Automatically controls the relay based on light intensity
    • Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
    • Adjustable light level set-point
    • Controls loads of 115/230VAC @ 10A
    • Controls loads of 0  15VDC @ 10A
    • Both NO (Normally Open) and NC (Normally Closed) contacts
    • LED indicator when the relay is energized
    • 12V power operation
  • -16%
    Quick View

    Lillypad

    Original price was: ₨900.00.Current price is: ₨760.00.

    LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.

  • -14%
    Quick View

    LM393 Microphone Amplifier

    Original price was: ₨300.00.Current price is: ₨259.00.
    1. Detectable sound signal size
    2. Built-in filter-rectifier circuit, DC signal output
    3. Good sensitivity, built-in amplifier circuit, adjustable gain
    4. Voltage signal for sound intensity can be obtained by AD conversion
    5. Analog voltage signal output, signal amplitude VCC/2
    6. Compatible for Arduino sensor interface.
  • -10%
    Quick View

    Logic Level Converter

    Original price was: ₨99.00.Current price is: ₨89.00.

    The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. A Logic Level Converter is very easy to connect and use since it doesn’t need any programming, all you have to do is connect the 5V wire on one side and the 3.3V on the other.

  • -3%
    Quick View

    MAX31865 RTD PT100 Amplifier

    Original price was: ₨1,000.00.Current price is: ₨969.00.
    • Advantage: Handling all of your RTD needs.
    • Strong point: Compensating 3 or 4-wire RTDs for better accuracy.
    • Characteristic: Could be used with any Arduino or microcontroller.
    • Feature: 3.3V regulator and level shifting.
    • Feature: Could be used with any 2, 3, or 4-wire PT100 RTD.
  • -18%
    Quick View

    MAX6675 Thermocouple Module MAX 6675

    Original price was: ₨950.00.Current price is: ₨779.00.
    • Works with any K type thermocouple
    • 0 to 1024 degree C output in 0.25-degree increments (12-bit resolution)
    • 3.3 to 5v power supply and logic levels
    • SPI data output requires any 3 digital I/O pins.
    • GND (0V)
    • VCC ( 3.3V / 5V)
    • SCK (Serial Clock)
  • -19%
    Quick View

    MT3608 Step-Up Adjustable DC-DC Switching Boost Converter

    Original price was: ₨160.00.Current price is: ₨129.00.
    1. Input Voltage: 2-24V DC
    2. Output Voltage: 5-28V DC
    3. Maximum Output Current: 2A
    4. Switching Frequency: 1.2Mhz
    5. Output Ripple: <100mV
    6. Module Size: 37.2mm x 17.2mm x 14.0mm
    7. About 93% Efficiency
    8. Features like an under-voltage lockout, thermal overload protection
  • -62%
    Quick View

    NRF24L01 2.4GHz Wireless Transceiver Module

    Original price was: ₨650.00.Current price is: ₨249.00.
    • Worldwide 2.4GHz ISM band operation Free license to use.
    • 126 RF channels.
    • High air data rate: 250kbps, 1 and 2Mbps.
    • Transmitter: 11.3mA at 0dBm output power.
    • Receiver: Fast AGC for improved dynamic range.
    • Receiver: Integrated channel filters.
    • Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
    • Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
    • Low Power Management:1.9 to 3.6V supply range.
    • GFSK modulation.
    • Auto packet transaction handling.
    • Easy to design.
    • Small size:15mm*29mm.
  • -25%
    Quick View

    NRF24L01 Antenna Pair

    Original price was: ₨799.00.Current price is: ₨599.00.

    This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.

  • -52%
    Quick View

    nRF24L01 Breakout Adapter with On-board 3.3V Regulator

    Original price was: ₨350.00.Current price is: ₨169.00.
    • Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
    • On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
    • Allows for easy connection to nRF24L01+ modules
    • Small power on SMD LED indicator
    • On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
    • Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
  • -44%
    Quick View

    NRF24L01 Wireless Transceiver

    Original price was: ₨430.00.Current price is: ₨239.00.
    • It is 100 percent brand new and high build quality.
    • Its maximum operating speed is up to 2Mbps.
    • It has GFSK modulation efficiency and anti-interference ability.
    • It is particularly suitable for industrial control applications.
    • It has 125 channels.
    • It is multi-point communication and frequency hopping to meet the communication needs.
    • It has built-in hardware CRC error detection.
    • It has multi-point communication address control.
    • It has a low power range which is 1.9 – 3.6V and it has 1uA on power-down mode.
    • It has a built-in 2.4GHz antenna.
    • It has a built-in voltage regulator
    • It has a standard DIP Pitch Interface for embedded applications.
    • Its input voltages are 1.9 to 3.6 volts.
    • Its size is 34 x 17 x 1 mm.
  • -17%
    Quick View

    Ph Sensor Gravity Sensor Module

    Original price was: ₨7,800.00.Current price is: ₨6,499.00.
    1. Module Power: 5.00V
    2. Module Size : 43 x 32mm(1.69×1.26″)
    3. Measuring Range :0 – 14PH
    4. Measuring Temperature: 0 – 60 ℃
    5. Accuracy : ± 0.1pH (25 ℃)
    6. Response Time: ≤ 1min
    7. pH Sensor with BNC Connector
    8. pH2.0 Interface ( 3 foot patch )
    9. Gain Adjustment Potentiometer
    10. Power Indicator LED
  • -8%
    Quick View

    PPM Encoder

    Original price was: ₨1,300.00.Current price is: ₨1,200.00.

    PPM encoder is the role of the receiver output of multiple channel PWM signal encoded into PPM composite signal output, single-wire connection to support the flight control.

  • -40%
    PWM 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator
    Quick View

    PWM controller DC Motor speed controller 12V-40V 10A

    Original price was: ₨999.00.Current price is: ₨599.00.
    • Input Voltage: DC 12V-40V
    • Control Power: 0.01-400W
    • Rated Current: 8A
    • Maximum Current: 10A
    • Static Current: 0.02A(standby status)
    • Frequency: 13kHz
    • Speed Adjustment Range: 10%-100%
    • Hole Diameter: 3.2mm
    • Operating Temperature: -20C~125C
    • Dimensions: 75*60*28mm / 2.95*2.36*1.10in
    • Package Weight: Approx. 73g/2.6oz
  • -27%
    CCM5D Motor PWM Speed Controller With Digital LED Display
    Quick View

    PWM DC Motor Speed Controller 8A With Display

    Original price was: ₨1,500.00.Current price is: ₨1,099.00.
    1. Suitable for motors with voltage: 12 and 24V
    2. The total range of permissible tension: 6V to 30V DC
    3. Output current: Rated current 5A (8A max short term)
    4. PWM frequency: 16 kHz
    5. Adjustable PWM duty cycle : 0% -100%
    6. LED Digital display showing the duty cycle
    7. The dimensions of the regulator are 7.8 x 4.2 x 2.5 cm