-
Specifications:
- Material: Glass Epoxy (Single Side)
- Size: 8 Inches X 8 Inches
- Approx Thickness – 1.5 mm
-
Half Size Breadboard 400 Points For Electronics
Original price was: ₨250.00.₨179.00Current price is: ₨179.00. Quick ViewHalf Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
-
Dotted 100mm X 220mm Stripboard Veroboard Prototyping Board
Original price was: ₨170.00.₨149.00Current price is: ₨149.00. Quick View- Material: Fibreglass FR4
- Surface: Copper PCB
- Hole Diameter: 1.0mm
- Hole Pitch: 2.54mm
- Board Size: 100x220mm
- Copper Thickness: 25 micron
- Sided: Single-Sided
-
Veroboard Normal Line 14.5×6.5cm Stripboard PCB
Original price was: ₨200.00.₨159.00Current price is: ₨159.00. Quick View- Stripboard Just like Veroboard
- Good quality product individually sealed to prevent tarnishing
- This item is of a superior quality to most other boards on offer and is guaranteed to be easier to solder
- This product is manufactured from copper clad laminated board
- This product is ideal for prototyping, educational products etc.
- The product is single-sided PCB prototype stripboard. Size is 65x145mm, pitch of 2.54mm, a pore size of 1.00mm.
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects. Stripboards to meet your demands when designing electronic experiments and DIY projects.
- High quality of durable glass fiber material with 1.3mm thickness makes a very solid and sturdy prototype circuit board, a tin plating process makes the welding component easier.
- The stripboards are easy to weld and can be cut to other sizes as desired.
-
- Copper Thickness: 2oz
- Total PCB thickness: 16mm
- Tolerance: 10%
- Dimensions: 6 x 6 (150 x 150mm)
- Single Sided
- Type: FR4
- Board material: Fiber Glass
-
-
Ferric Chloride for PCB Etching
Original price was: ₨260.00.₨199.00Current price is: ₨199.00. Quick View1. Suggested only if you know how to etch PCBs with FeCl3.
2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.
3. Mix etchant in water, do not drop water over the etchant.
4. Do an etching procedure in open space so any chemical gas produced during the process can dissipate in the air easily.
5. Put etchant+water solution in the plastic box only.
Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.
Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measures are in place like hand gloves, glasses, etc.
-
OTH20 170 Tie Points Mini Breadboard
Original price was: ₨100.00.₨79.00Current price is: ₨79.00. Quick View- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
-
- Easily convert circuit diagrams into working ventures.
- Make a permanent basis for your breadboard templates.
- Built specifically for dealing with DIL or DIP ICs.
- The copper has been stripped from one entire strip.
- Complex circuits can be easily built with a simple strip configuration.
- Copper tracks are electrically disconnected from one another and can be sliced to interrupt current traffic.
- With basic scissors, cutting the SRBP base material to the appropriate size is a breeze.
-
DB9 Female Right Angle Connector 9 Pin PCB Mount
Original price was: ₨49.00.₨29.00Current price is: ₨29.00. Quick ViewMale Serial Port connector that mounts on a PCB for soldering into your projects or replacing a damaged DB9 Serial Connector on a circuit board.
-
1660 Point Bread Board
Original price was: ₨1,250.00.₨1,199.00Current price is: ₨1,199.00. Quick ViewA breadboard is referred to a solder-less breadboard. These are great units for making temporary circuits and prototyping, and they require absolutely no soldering. You just need to place the component on the breadboard equipped with a power source.
-
- Solder less breadboard with 840 tie points.
- Self-adhesive tape is included on the back, One Terminal Strips Tie-point 640
- Two distribution strips tie-point 200.
- White ABS plastic body with printed legend. The color legend on distribution strips.
- Accept resistors, transistors, diodes, LEDS, capacitors and other types of electronic components.
- Wire size: Suitable for 29-20 AWG wires.
- Size: 175 x 67 x 8 mm
-
- General Purpose single-sided Phenolic PCB, Zero/dotted PCB
- Size: 4×4 Inches standard (suitable for most of the DIY circuits)
- Colour: Brown, Corrosion-resistant material
- Perforated Zero PCB Test Board
-
Breadboard Large with Polarity Markings
Original price was: ₨350.00.₨279.00Current price is: ₨279.00. Quick View -
Veroboard Vero Board Single Side Large Breadboard Style
Original price was: ₨300.00.₨199.00Current price is: ₨199.00. Quick ViewProject Board / Vero board / prototyping board Size = 14.5cm x 6.5cm
we can use for any electronics projects.
-
10cm x 22cm Single Side Copper Prototyping Paper PCB
Original price was: ₨350.00.₨249.00Current price is: ₨249.00. Quick View- Material: Bakelite
- Length: 220mm
- Width: 100mm
- Thickness:1.2mm
- Hole Dia:1mm
-
10x22cm Single Sided Universal Printed Circuit Board
Original price was: ₨650.00.₨449.00Current price is: ₨449.00. Quick ViewDimension : 10×22 cm / 3.9×8.6 inch (W x L)
Hole ( row x column ) : 80 x 38
Material : glass fiber FR4
Metal :Tin-plate
Thickness : approx. 1.6mm
Hole Pitch : approx. 2.54 mm
Hole Diameter : approx. 1 mm
Mounting Hole Diameter : approx. 3 mm
Color : green basic,silver tone -
10x10cm Single Sided Universal Printed Circuit Board
Original price was: ₨500.00.₨299.00Current price is: ₨299.00. Quick ViewDimension : 10×10 cm / 3.9×3.9 inch (W x L)
Hole ( row x column ) : 37 x 35
Material : glass fiber FR4
Thickness : approx. 1.6mm
Hole Pitch : approx. 2.54 mm
Hole Diameter : approx. 1 mm
Mounting Hole Diameter : approx. 3 mm
Color : green basic,silver tone -
Breadboard Power Distribution
Original price was: ₨890.00.₨799.00Current price is: ₨799.00. Quick ViewThe breadboard provides two columns for power distrubution. The power distrubution columns are marked with polarities so that it is easy for the user to connect power supply probes.