Module

Default sorting
Show
48
  • -66%

    KY-009 RGB LED SMD module

    Arduino & IOT Boards
    (0)
    Original price was: ₨200.00.Current price is: ₨69.00. Quick View
    • Using 5050 full-color LED.
    • RGB tricolour current一limiting resistance to prevent burnout.
    • Through the PWM adjusting three primary colors can be mixed to obtain different colors.
    • With a variety of single一chip interfaces.
    • Working Voltage: 5V.
    • LED Drive Mode: Common cathode driver.
  • -10%

    Logic Level Converter

    Arduino & IOT Boards
    (0)
    Original price was: ₨99.00.Current price is: ₨89.00. Quick View

    The logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. A Logic Level Converter is very easy to connect and use since it doesn’t need any programming, all you have to do is connect the 5V wire on one side and the 3.3V on the other.

  • -19%

    RFID Card 13.56 KHz

    Communication Modules
    (0)
    Original price was: ₨110.00.Current price is: ₨89.00. Quick View
    • Contactless transmission of data and supply energy (no battery needed)
    • Operating distance: Up to 100mm (depending on antenna geometry)
    • Operating frequency: 13.56MHz
    • Data transfer: 106 kbit/s
    • Data integrity: 16 Bit CRC,parity,bit coding bit counting
    • Anticollision
    • Typical tickting transaction: <100 ms ( including backup management)
  • -24%

    USB Type-B Connector Breakout Board

    Breakout Boards
    (0)
    Original price was: ₨130.00.Current price is: ₨99.00. Quick View
    • Effective this breakout board has a USB Type B female connector, with all 4 pins broken out to a DIP 2.54mm header.
    • Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
    • USB 2.0 Type B Female
    • 2.54mm Pitch
    • DIP4
    • color: green
    • Material: plastic
    • size:20*20*1mm
    • Package Contents:
    • 2 * USB to DIP adapter board
    • Only the above package content, other products are not included.
  • -32%

    MT3608 Step-Up Adjustable DC-DC Switching Boost Converter

    Arduino & IOT Boards
    (0)
    Original price was: ₨160.00.Current price is: ₨109.00. Quick View
    1. Input Voltage: 2-24V DC
    2. Output Voltage: 5-28V DC
    3. Maximum Output Current: 2A
    4. Switching Frequency: 1.2Mhz
    5. Output Ripple: <100mV
    6. Module Size: 37.2mm x 17.2mm x 14.0mm
    7. About 93% Efficiency
    8. Features like an under-voltage lockout, thermal overload protection
  • -60%

    nRF24L01 Breakout Adapter with On-board 3.3V Regulator

    Breakout Boards
    (0)
    Original price was: ₨350.00.Current price is: ₨139.00. Quick View
    • Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
    • On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
    • Allows for easy connection to nRF24L01+ modules
    • Small power on SMD LED indicator
    • On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
    • Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
  • -45%

    KY-021 Mini Magnetic Reed Module for Arduino

    Arduino & IOT Boards
    (0)
    Original price was: ₨270.00.Current price is: ₨149.00. Quick View
    • Operating voltage: 3.3V to 5V
    • Output type: Digital
    • Dimensions: 20 x 15 x 7mm
    • Input voltage: 3.3~5v
    • Weight: 1.2g
    • Reed switch: Normally open
    • Reed switch sensitivity: 30 gauss
    • Operating temperature: -20°C to 85°C
    • Storage temperature: -40°C to 125°C
  • -40%

    Analog/Digital LDR Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨250.00.Current price is: ₨149.00. Quick View
    • LDR module 4 PIN
    • Operating voltage 3.3V-5V
    • Signal output indicator light.
    • LDR module 4 PIN
    • Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
  • -26%

    RGB module Normal

    Arduino & IOT Boards
    (0)
    Original price was: ₨200.00.Current price is: ₨149.00. Quick View
    • Material: FR4
    • Length: 25mm
    • Width: 11mm
    • Height: 16mm
    • Weight: 1.59g
    • Operating Voltage: 5v DC
  • -25%

    RGB SMD MODULE FULL COLOR

    Arduino & IOT Boards
    (0)
    Original price was: ₨200.00.Current price is: ₨150.00. Quick View

    This is the SMD RGB LED Common Cathode Module, These module has 3 separate LEDs the Red, Green and Blue which can be individually driven by applying a voltage to the appropriate module pin this example code is uses the Arduino analogWrite(PWM) function to cycle through the full possible output colors this smd led module is capable of producing a rainbow color scheme.

  • -31%

    Dual-axis XY Joystick Module for Arduino

    Arduino & IOT Boards
    (0)
    Original price was: ₨230.00.Current price is: ₨159.00. Quick View
    • Dimensions: 40 x 27 x 15 (LxWxH) mm
    • Weight: 10gm (without Hat).
    • 2.54mm pin interface leads
    • Operating Voltage: 5V.
    • Long service life and stable performance
    • Standard interface and electronic building blocks
    • Widely use in Arduino DIY projects
    • Cross rocker as a two-way 10K resistor, with the rocker in a different direction
  • -36%

    1 Channel Relay Module

    Mega Payday Sale
    (2)
    Original price was: ₨250.00.Current price is: ₨159.00. Quick View
    • VCC: Power interface,5V
    • GND: Ground
    • IN: Control interface.
    • Drive Current: At least 4mA
    • COM: Control circuit ground, connect to GND
    • Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
    • Weight: Approx. 12g
  • -57%
    DS1307 RTC REAL TIME CLOCK MODULE

    DS1307 RTC REAL TIME CLOCK MODULE

    Arduino & IOT Boards
    (0)
    Original price was: ₨390.00.Current price is: ₨169.00. Quick View

    DS1307 RTC REAL TIME CLOCK MODULE which adopts the I2C protocol to communicate with SCM, and there was this kind of interface on Arduino, therefore is very convenient to link with each other. DS1307 has a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break-off, but be careful when you use it to take some kind of high-power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually, we will only use the I2C interface to realize the basic set of the clock/read function. Note, that this module must be installed on the battery and can work normally. The battery is button batteries (type CR2032 will be better), the positive upward:

  • -58%

    5A Mini DC Motor PWM Speed Controller Module

    Arduino & IOT Boards
    (3)
    Original price was: ₨400.00.Current price is: ₨169.00. Quick View

    DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer available at best price in Pakistan at Electronation Pakistan

    • Working voltage: DC4.5V-35V
    • Output current: 0-5A
    • Output power: 90W (MAX)
    • Quiescent current: 7u A(standby mode)
    • PWM duty ratio: 1%-100%
    • PWM frequency: 20khz
    • Size: 30*26mm
    • Color: multicolor
    • Material: electric components
  • -53%

    DS1302 RTC Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨400.00.Current price is: ₨189.00. Quick View
    • The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
    • 318 temporary data storage RAM
    • Working current of 2.0V, less than 300nA
    • Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
    • 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
    • Simple 3 wire interface
    • Compatible with TTL Vcc=5V
    • Double power supply pipe for main power and backup power supply.
  • -20%

    Rotary Encoder Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨250.00.Current price is: ₨199.00. Quick View
    • Working voltage: 5V
    • Pulses per 360-degree revolution: 20
    • Push button shaft On/Off switch
    • Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
    • Standard “D” shaft, you can purchase knobs to give it a finished look
  • -10%

    Arduino SD Card Reader Module

    Arduino & IOT Boards
    (1)
    Original price was: ₨220.00.Current price is: ₨199.00. Quick View
    • Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
    • The level conversion circuit board that can interface level is 5V or 3.3V\
    • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
    • Communication interface is a standard SPI interface
    • 4 M2 screw positioning holes for easy installation
    • Size: 4.1 x 2.4cm
  • -27%

    LCD I2C Module IIC/I2C Serial Interface Adapter

    Arduino & IOT Boards
    (0)
    Original price was: ₨300.00.Current price is: ₨219.00. Quick View
    • Operating Voltage: 5V
    • Backlight and Contrast is adjusted by potentiometer
    • Serial I2C control of LCD display using PCF8574
    • Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
    • Compatible for 16×2 LCD
    • This is another great IIC/I2C/TWI/SPI Serial Interface
    • With this I2C interface module, you will be able to realize data display via only 2 wires.
  • -62%

    NRF24L01 2.4GHz Wireless Transceiver Module

    Communication Modules
    (0)
    Original price was: ₨650.00.Current price is: ₨249.00. Quick View
    • Worldwide 2.4GHz ISM band operation Free license to use.
    • 126 RF channels.
    • High air data rate: 250kbps, 1 and 2Mbps.
    • Transmitter: 11.3mA at 0dBm output power.
    • Receiver: Fast AGC for improved dynamic range.
    • Receiver: Integrated channel filters.
    • Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
    • Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
    • Low Power Management:1.9 to 3.6V supply range.
    • GFSK modulation.
    • Auto packet transaction handling.
    • Easy to design.
    • Small size:15mm*29mm.
  • -58%

    RC522 RFID Reader Module 13.56MHz

    Clearance Sale
    (2)
    Original price was: ₨590.00.Current price is: ₨249.00. Quick View
    • Module Name: MF522-ED
    • Working current 13 26mA/ DC 3.3V
    • Standby current 10-13mA/DC 3.3V
    • sleeping current <80uA
    • peak current <30mA
    • Working frequency 13.56MHz
    • Card reading distance  0 60mm mifare1 card
    • Protocol SPI
    • data communication speed Maximum 10Mbit/s
    • Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
    • Dimension 40mm 60mm
    • Environment
    • Working temperature -20 80 degree
    • Storage temperature -40 85 degree
    • Humidity relevant humidity 5% 95%
    • Max SPI speed: 10Mbit/s
  • -17%

    2Channel Relay Module

    Module
    (1)
    Original price was: ₨300.00.Current price is: ₨249.00. Quick View
    1. 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
    2. Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
    3. Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
    4. Opto-isolated inputs
    5. Indication LED’s for Relay output status
  • -29%

    4 Bits TM1637 Digital Tube LED 7 Segments Display Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨350.00.Current price is: ₨249.00. Quick View

    4 Bits TM1637 Digital Tube LED 7 Segments Display Module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.

  • -14%

    LM393 Microphone Amplifier

    Arduino & IOT Boards
    (0)
    Original price was: ₨300.00.Current price is: ₨259.00. Quick View
    1. Detectable sound signal size
    2. Built-in filter-rectifier circuit, DC signal output
    3. Good sensitivity, built-in amplifier circuit, adjustable gain
    4. Voltage signal for sound intensity can be obtained by AD conversion
    5. Analog voltage signal output, signal amplitude VCC/2
    6. Compatible for Arduino sensor interface.
  • -15%

    RF 315/433 Transmitter/Receiver Module

    Communication Modules
    (0)
    Original price was: ₨350.00.Current price is: ₨299.00. Quick View

    Transmitter :

    • Working voltage: 3V – 12V for max. power use 12V
    • Working current: max Less than 40mA max, and min 9mA
    • Resonance mode: (SAW)
    • Modulation mode: ASK
    • Working frequency: Eve 315MHz Or 433MHz
    • Transmission power: 25mW (315MHz at 12V)
    • Frequency error: +150kHz (max)
    • Velocity: less than 10Kbps

    So this module will transmit up to 90m in open area.

    Receiver :

    • Working voltage: 5.0VDC +0.5V
    • Working current: 5.5mA max
    • Working method: OOK/ASK
    • Working frequency: 315MHz-433.92MHz
    • Bandwidth: 2MHz
    • Sensitivity: excel 100dBm (50)
    • Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)
  • -15%

    Arduino Sensor Shield

    Arduino & IOT Boards
    (0)
    Original price was: ₨350.00.Current price is: ₨299.00. Quick View
    • It has a Pin 13 LED pilot.
    • It has D0-D13 IO ports.
    • A0-A5 analog IO ports.
    • It contains a reset button.
    • It also contains a Power LED.
    • It has an SD card interface.
    • It contains an Ultrasonic interface.
    • This expansion board has an RS232 interface.
    • It has a Bluetooth interface.
    • It has an APC220 interface.
    • IIC interface.
    • 12864 LCD Parallel interfaces.
    • It contains 12864 LCD Serial Interface
  • -21%
    Out Of Stock

    Arduino 28BYJ48 Stepper Motor

    Arduino & IOT Boards
    (0)
    Original price was: ₨440.00.Current price is: ₨349.00. Quick View

    Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:

  • -68%

    DS3231 REAL TIME CLOCK MODULE – RTC

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,099.00.Current price is: ₨349.00. Quick View
    • Size: 38mm (length) * 22mm (W) * 14mm (height)
    • Operating voltage: 3.3 – 5 .5 V
    • DS3231M at the core
    • Clock Accuracy: 5ppm 0-40 C
    • Two programmable alarms
    • Programmable square-wave output
    • DS3231M Datasheet
    • LIR2032 / CR2032 backup battery holder for uninterrupted time management (battery not included)
    • Wiring instructions (with Arduino Uno R3 for example):
    • SCL A5
    • SDA A4
    • VCC 5V
    • GND GND
  • -10%

    A3967 Stepper Motor Driver Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨400.00.Current price is: ₨360.00. Quick View

    This EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.

  • -26%

    L298N Motor Driver Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨500.00.Current price is: ₨369.00. Quick View
    • Driver Model: L298N 2A
    • Driver Chip: Double H Bridge L298N
    • Motor Supply Voltage (Maximum): 46V
    • Motor Supply Current (Maximum): 2A
    • Logic Voltage: 5V
    • Driver Voltage: 5-35V
    • Driver Current:2A
    • Logical Current:0-36mA
    • Maximum Power (W): 25W
    • Current Sense for each motor
    • Heatsink for better performance
    • Power-On LED indicator
  • -27%

    8×8 Dot Matrix MAX7219 MCU Control Display Generic Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨550.00.Current price is: ₨399.00. Quick View
    • Operating Voltage: 4.7V  5.3V
    • Operating Current: 320mA
    • Max Operating Current: 2A
    • Display type: LED
    • Mounting: THT
    • Display type: Matrix
    • Display resolution: 8×8
    • Color: Red
    • Common electrode: Cathode
  • -56%

    2000W PWM AC Motor Speed Control Module Dimmer

    Arduino & IOT Boards
    (0)
    Original price was: ₨900.00.Current price is: ₨399.00. Quick View
    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃
  • -22%

    Light Sensitive LDR Relay Module 12V

    Module
    (1)
    Original price was: ₨600.00.Current price is: ₨469.00. Quick View
    • Automatically controls the relay based on light intensity
    • Included LDR (Light Dependent Resistor) sensor on 10 lead detects visible light
    • Adjustable light level set-point
    • Controls loads of 115/230VAC @ 10A
    • Controls loads of 0  15VDC @ 10A
    • Both NO (Normally Open) and NC (Normally Closed) contacts
    • LED indicator when the relay is energized
    • 12V power operation
  • -8%
    Out Of Stock

    CJMCU-4051 74HC4051 8 Channel Analog Multiplexer Module

    Arduino & IOT Boards
    (0)
    Original price was: ₨520.00.Current price is: ₨480.00. Quick View
    • Wide analog input voltage range from -5 V to +5 V
    • Complies with JEDEC standard no. 7A
    • Low ON resistance:
    • 80 ohm(typical) at VCC -VEE = 4.5 V
    • 70 ohm(typical) at VCC -VEE = 6.0 V
    • 60 ohm(typical) at VCC -VEE = 9.0 V
    • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
    • Typical break before make built-in
    • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101E exceeds 1000 V
    • Multiple package options
    • Specified from -40 to +85 and -40 to +125
  • -18%
    Out Of Stock

    Relay Module 4 channel

    Module
    (0)
    Original price was: ₨599.00.Current price is: ₨489.00. Quick View
    1. Output controllable: Digital
    2. Compatible: With any 5V microcontroller such as Arduino.
    3. Rated through-current: 10A (NO) 5A (NC)
    4. Control signal: TTL level
    5. Max. switching voltage: 250VAC/30VDC
    6. Max. switching current: 10A
    7. Size: 76mm x 56mm x 17mm
  • -23%
    Out Of Stock

    Sim 800A GSM

    Communication Modules
    (0)
    Original price was: ₨650.00.Current price is: ₨500.00. Quick View

    The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption

  • -35%

    HC-06 Bluetooth Module

    Bluetooth
    (0)
    Original price was: ₨850.00.Current price is: ₨549.00. Quick View

    HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.

  • -54%
    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,200.00.Current price is: ₨549.00. Quick View
    1. Voltage: 3-3.6V (recommended 3.3V) V.
    2. Maximum output power: +20dBm.
    3. Emission mode current(peak): 115mA.
    4. Receive Mode Current(peak): 45mA.
    5. Power-down mode current: 4.2uA.
    6. Sensitivity 2Mbps mode in received: -92dBm.
    7. Sensitivity 1Mbps mode in received: -95dBm.
    8. PA gain: 20DbLNA gain: 10Db.
    9. Sensitivity 250kbps mode in received: -104dBm.
    10. Operating Range: 1 km
    11. LNA Noise figure: 2.6 Db.
    12. Antenna Gain (peak): 2Dbi.
    13. 2MB rate (Open area): 520m.
    14. 1MB rate (Open area): 750m.
    15. 250Kb rate (Open area): 1100m.
    16. Interface: SPI.
  • -25%

    NRF24L01 Antenna Pair

    Communication Modules
    (0)
    Original price was: ₨799.00.Current price is: ₨599.00. Quick View

    This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.

  • -37%

    AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3

    Arduino & IOT Boards
    (0)
    Original price was: ₨950.00.Current price is: ₨599.00. Quick View
    1. Ultra Low Standby Power 90uA ~ 400uA
    2. Communication Distance Range : 100 ft / 60mtr
    3. Super Fast Reaction Speed : 0.4 Sec.
    4. Built-in PCB antena
    5. Power Input : 3.6V To 6V DC (Cannot higher than 6V)
    6. Size : 43 X 15 mm
    7. Color : Blue
    8. Net weight : 4g
  • -36%
    PWM 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator

    PWM controller DC Motor speed controller 12V-40V 10A

    Arduino & IOT Boards
    (0)
    Original price was: ₨999.00.Current price is: ₨639.00. Quick View
    • Input Voltage: DC 12V-40V
    • Control Power: 0.01-400W
    • Rated Current: 8A
    • Maximum Current: 10A
    • Static Current: 0.02A(standby status)
    • Frequency: 13kHz
    • Speed Adjustment Range: 10%-100%
    • Hole Diameter: 3.2mm
    • Operating Temperature: -20C~125C
    • Dimensions: 75*60*28mm / 2.95*2.36*1.10in
    • Package Weight: Approx. 73g/2.6oz
  • -13%

    RFID RDM 6300

    Communication Modules
    (0)
    Original price was: ₨800.00.Current price is: ₨699.00. Quick View
    • Operating frequency: 125 kHz
    • Baud rate: 9600
    • Interface: TTL level RS232 format
    • Working voltage: DC 5V
    • Working current: <50mA
    • Receive distance: 20~50mm
    • Dimension (mm): 38.5 x 20
    • Weight: 7g
  • -26%

    HC-05 Bluetooth Module

    Bluetooth
    (1)
    Original price was: ₨950.00.Current price is: ₨699.00. Quick View

    The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.

  • -52%
    Out Of Stock

    MAX6675 Module + K Type Thermocouple

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨719.00. Quick View
    • Thermocouple temperature range: 0 to 450 °C
    • Module sensor temperature range (°C): 0 to 1024
    • Temperature resolution (°C): 0.25
    • Module supply voltage: 3 to 5.5 V
    • Module current: 50mA
    • Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible
    • Termocouple accuracy (0-700°C): 8 LSBs
    • Termocouple disconnect detection
  • -32%

    ADS1115 Analog-to-Digital Converter

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,100.00.Current price is: ₨749.00. Quick View
    • WIDE SUPPLY RANGE: 2.0V to 5.5V
    • LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
    • PROGRAMMABLE DATA RATE: 8SPS to 860SPS
    • INTERNAL LOW-DRIFT VOLTAGE REFERENCE
    • INTERNAL OSCILLATOR
    • INTERNAL PGA
    • I2C INTERFACE: Pin-Selectable Addresses
    • FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
    • PROGRAMMABLE COMPARATOR
    • This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
  • -45%

    HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,350.00.Current price is: ₨749.00. Quick View
    • Working frequency: 433.4MHz to 473.0MHz
    • Supply voltage: 3.2V to 5.5VDC
    • Communication distance: 1,000m in the open space
    • Serial baud rate: 1.2Kbps to 115.2Kbps（default 9.6Kbps）
    • Receiving sensitivity: -117dBm to -100dBm
    • Transmit power: -1dBm to 20dBm
    • Interface protocol: UART/TTL
    • Operating temperature: -40℃ to +85℃
    • Dimensions: 27.8mm x 14.4mm x 4mm
  • -16%
    Out Of Stock

    Lillypad

    Arduino & IOT Boards
    (0)
    Original price was: ₨900.00.Current price is: ₨760.00. Quick View

    LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.

  • -11%
    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module

    5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module

    Module
    (0)
    Original price was: ₨900.00.Current price is: ₨799.00. Quick View
    1. Imported high-quality double-sided compact PCB.
    2. Opto-isolated inputs mean your digital electronics are safe and noise-free.
    3. This relay module is 5V active low.
    4. It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
    5. It is also able to control various appliances and other equipment with a large current.
    6. 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
    7. The standard interface can be directly connected with microcontrollers.
    8. Red working status indicator lights are conducive to safe use.
    9. Widely used for all MCU control, industrial sector, PLC control, and smart home control.
  • -49%
    DC 10-60V 20A PWM Universal Motor Speed Controller Regulator

    20A PWM DC Motor Speed Controller Regulator

    Arduino & IOT Boards
    (0)
    Original price was: ₨1,650.00.Current price is: ₨849.00. Quick View
    • Working Voltage: DC 10V – 60V
    • Control Power: 0.01-1200W
    • Static Current: 0.010A (Standby)
    • Rated Current: 15A
    • Max.Current: 20A
    • PWM Duty Cycle: 0% -100%
    • PWM Frequency: 25 kHz
    • Control Voltage: 0-5V
      • Potentiometer kind: Single turn
      • Resistance: 10k
      • Power: 125mW
      • Mounting: On cable
      • Characteristics: Linear
      • Body material: Metal
      • Mechanical rotation angle: 300
      • Max. operating voltage: 200V
    • Material: Plastic, metal
    • Module Size: 77x45x29mm