Arduino Pro Micro 5v 16m Atmega32u

~~₨2,000.00~~ ₨1,599.00

ATMEGA32U4 chip
Supply Voltage: 5VDC
Frequency: 16Mhz
Four 10 bit ADC pins
12 pins Digital I/O
Dimension: 33mm x 18mm

Out of stock

Categories: Arduino & IOT Boards, Boards

Description
Reviews (0)

Arduino Pro Micro 5v 16m Atmega32u

Arduino Pro Micro development board integrated with the microcontroller ATMEGA32U4 which operates at 5V and 16MHz frequency. This development board contains 4 channel 10 bit ADC, 5 PWM pins, 12 Digital input and output pins and a hardware serial connection Receiver and Transmitter. According to the running specification of this development board it is compatible many types of Arduino boards and another feature which is voltage regulator with the help of that voltage regulator it can accept the voltage upto 12 VDC. And there is an extra pin on the board named as the “RAW” this is pin is used in place of VCC if your power supply is not stable or unstable, there is a PTC fuse is also added and a diode protection to the power circuit.

Arduino pro micro is actually the small version of the Arduino Leonardo, based on the ATmega32u4. Due to its size, the board contains 12 digital input / output pins (5 of which can be used as PWM outputs), 4 (10 bit) ADC inputs, a 16 MHz crystal and a micro USB connection. Connect the sign to the computer and you can start immediately.

These boards, like the Leonardo, differ from previous boards, because the ATmega32u4 contains built-in USB communication, so that only a single microprocessor is needed on the board. This allows the board to be connected directly and used as a mouse or keyboard, because the USB communication goes through the same chip, the Arduino will log on and log off as a USB system when it is programmed or reset.

This Arduino is a clone, which means that this sign was not built in the original factory. The only difference between original and clones is that these Arduinos are cheaper. All components and circuits are otherwise identical.