IOT Boards

Default sorting
Show
48
  • -13%

    ESP8266 ESP12E -NODEMCU – CH340

    IOT Boards
    (2)
    Original price was: ₨799.00.Current price is: ₨699.00. Quick View
    • Input Voltage: 2.5 ~ 3.6V
    • Operating Voltage: 3.3V
    • CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
    • 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
    • 512 KB of EEPROM (512x Arduino UNO!)
    • External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
    • IEEE 802.11 b/g/n Wi-Fi
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • WEP or WPA/WPA2 authentication, or open networks
    • Digital I/O Pins (DIO): 16
    • Analog Input Pins (ADC): 1
    • UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
    • SPIs: 1
    • I2Cs: 1
    • Flash Memory: 4 MB
    • SRAM: 64 KB
    • Clock Speed: 80 Mhz
    • 80 Mhz clock (5x arduino UNO or mega!)
  • -50%

    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module

    IOT Boards
    (1)
    Original price was: ₨2,000.00.Current price is: ₨999.00. Quick View
    • CPU Tensilica Dual-Core 32-bit 240 MHz LX6 processors, integrated 520 Kb SRAM
    • Wifi 802.11 b/g/n/e/i
    • Bluetooth v4.2 BR/EDR and BLE
    • Memory 4 MByte Flash
    • Temperature Range -40 to 125 Deg C.
  • -32%

    ESP8266 ESP-01 WiFi Module

    IOT Boards
    (0)
    Original price was: ₨600.00.Current price is: ₨410.00. Quick View
    • 802.11 b/g/n
    • Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP Protocol Stack
    • Integrated TR switch, balun, LNA, power amplifier, and matching network
    • Integrated PLLs, regulators, DCXO, and power management units
    • +19.5dBm output power in 802.11b mode
    • Power down leakage current of <10uA
    • 1 Mb flash memory
    • Integrated low-power 32 bit CPU could be used as an application processor
    • SDIO 1.1/ 2.0, SPI, UART
    • STBC, 1×1 MIMO, 2×1 MIMO
    • A-MPDU and A-MSDU aggregation and 0.4ms guard interval
    • Wake up and transmit packets in <2ms
    • Standby power consumption of <1.0mW(DTIM3)
  • -13%

    R307 Finger Print Sensor (R-307)

    IOT Boards
    (0)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00. Quick View
    1. Supply voltage: DC 4.2 ~ 6.0V
    2. Working current: 50mA (typical)
    3. Peak current: 80mA
    4. Fingerprint image input time: <0.3 seconds
    5. Window area: 14×18 mm
    6. Comparison method: (1: 1)
    7. Search method: (1: N)
    8. Characteristic file: 256 bytes
    9. Template file: 512 bytes
    10. Storage capacity: 1000 pieces
    11. Security Level: Five (from low to high: 1,2,3,4,5)
    12. Fake rate (FAR): <0.001%
    13. Refusal rate (FRR): <1.0%
    14. Search time: <1.0 seconds (1: 1000 hours, mean value)
    15. Host interface: UART, USB1.1
    16. Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
    17. Working environment: Temperature: -20 ℃ – +40 ℃
    18. Relative humidity: 40% RH-85% RH (no condensation)
    19. Overall Size: 4.5×2.4x2cm
  • -28%

    ESP32-CAM WiFi + Bluetooth Camera Module

    Arduino & IOT Boards
    (1)
    Original price was: ₨1,900.00.Current price is: ₨1,375.00. Quick View
    • Module Model: ESP32-CAM
    • Package: DIP-16
    • Size: 2740.54.5(?0.2)mm
    • SPI Flash: Default 32Mbit
    • RAM: Internal 520KB + External 4M PSRAM
    • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
    • Wi-Fi: 802.11 b/g/n/e/i
    • Support Interfaces: UART, SPI, I2C, PWM
    • TF Card Support: Maximum 4G
    • IO Port: 9
    • Serial Port Rate: Default 115200 bps
    • Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
    • Antenna: Onboard PCB antenna with a gain of 2dBi
    • Power Supply Range: 5V
    • Operating Temperature: -20°C to 85°C
  • -18%
    Out Of Stock

    ESP8266 Witty Cloud ESP-12F WiFi Module

    IOT Boards
    (0)
    Original price was: ₨1,099.00.Current price is: ₨899.00. Quick View
    1. LDR Light Sensor on board.
    2. WS2812 Led on board.
    3. Includes CH340G USB-to-UART programmer.
    4. Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
    5. Supports 3 modes: AP, STA, AP+STA.
    6. Dimensions: 24mm x 16mm.
    7. Micro USB connection for power and/or programming
  • -40%

    ESP-12E WiFi Module

    IOT Boards
    (0)
    Original price was: ₨500.00.Current price is: ₨299.00. Quick View
    • Added six I/O serial and six SPI serial
    • Support wireless 802.11 b/g/n standard
    • Support the STA/AP/STA AP three work modes
    • Built-in TCP/IP protocol stack, and support multiple TCP Client connection
    • Support rich Socket the AT command
    • Support UART/GPIO data communication interface
    • Support Smart Link intelligent networking
    • Support remote firmware update (OTA)
  • -8%

    ESP-01 Adapter Module 3.3-5V

    IOT Boards
    (0)
    Original price was: ₨270.00.Current price is: ₨249.00. Quick View
    • For Arduino series motherboards or compatible motherboards can be used directly.
    • Power supply voltage: 5V
    • Module operating current: 240mA (max.)
    • Baud rate: Default 115200, can be modified by command
    • Wireless network mode: station / softAP / SoftAP + station
    • Wireless standard: 802.11 b / g / n
    • WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
    • With a command set, and simple development, start quickly
    • Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
  • -20%

    Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board

    IOT Boards
    (0)
    Original price was: ₨1,500.00.Current price is: ₨1,199.00. Quick View
    1. Universal low power IoT sensor hub.
    2. Home automation.
    3. Universal low power IoT recorder.
    4. Mesh network.
    5. Video streaming of the camera.
    6. Industrial wireless control.
    7. OTT TV box / set-top box device.
    8. Baby monitor.
    9. Smart Socket.
    10. Sensor networks.
    11. Wi-Fi toys: Counters, toys, Anti-lost device.
    12. Wearable electronic products.
    13. Wi-Fi speech recognition device.
    14. Wi-Fi location-aware devices.
  • -53%

    NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE

    IOT Boards
    (0)
    Original price was: ₨1,099.00.Current price is: ₨519.00. Quick View
    • Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
    • USB micro USB port for power, programming, and debugging
    • Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
    • Misc Reset and Flash buttons
    • Power 5V via micro USB port
    • Dimensions 49 x 24.5 x 13mm
  • -8%
    Out Of Stock

    ESP8266 NodeMCU V1.0 ESP-12E WiFI Module

    IOT Boards
    (0)
    Original price was: ₨400.00.Current price is: ₨369.00. Quick View
    • Microcontroller:      ESP-8266 32-bit
    • Clock Speed:             80 MHz
    • USB Converter:        CP2102
    • USB Connector:       Micro USB
    • Operating Voltage:  3.3V
    • Flash Memory:         4 MB
    • Digital I/O:                11
    • Analog Inputs:          1
    • Communications:     Serial, SPI.  I2C and 1-Wire via software libraries
    • WiFi:                           Built-in 802.11 b/g/n
  • -14%
    Out Of Stock

    Esp Adaptor with Temp Sensor

    IOT Boards
    (0)
    Original price was: ₨640.00.Current price is: ₨550.00. Quick View

    ESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.

  • -47%

    EPS8266 12F WiFi Board

    IOT Boards
    (0)
    Original price was: ₨750.00.Current price is: ₨399.00. Quick View
    • Its model is ESP-12F.
    • Its package is SMD22.
    • Its size is 24 x 16 x 3 (+- 0.2)mm.
    • Its certification is from FCC, CE,C,REACH,RoHS.
    • It has default 32Mb SPI flash.
    • It has a UART/ADC/GPIO/PWM interface.
    • It has 9 input-output ports.
    • It supports 300-4608000 bps and default 115200 bps UART baud rate.
    • Its frequency range is 2412- 2484 MHz.
    • It has a PCB antenna.
    • Its power value is 500mA.
    • Its modem sleep value is -20mA.
    • Its light sleep value is -2mA.
    • Its deep sleep value is -0.02mA.
    • Its security is WEP/WPA-PSK/WPA2-PSK
    • Its power supply voltages are 3 to 3.6V.
    • Its current value is >500mA.
    • Its operating temperature is -20 to 85-degree centigrade.
    • Its storage environment is -40 to 85-degree centigrade.
    • Its default baud rate is 115200.
    • It has a TTL serial port level.