IOT Boards

Default sorting
Show
48
  • -47%
    Quick View

    EPS8266 12F WiFi Board

    (0)
    Original price was: ₨750.00.Current price is: ₨399.00.
    • Its model is ESP-12F.
    • Its package is SMD22.
    • Its size is 24 x 16 x 3 (+- 0.2)mm.
    • Its certification is from FCC, CE,C,REACH,RoHS.
    • It has default 32Mb SPI flash.
    • It has a UART/ADC/GPIO/PWM interface.
    • It has 9 input-output ports.
    • It supports 300-4608000 bps and default 115200 bps UART baud rate.
    • Its frequency range is 2412- 2484 MHz.
    • It has a PCB antenna.
    • Its power value is 500mA.
    • Its modem sleep value is -20mA.
    • Its light sleep value is -2mA.
    • Its deep sleep value is -0.02mA.
    • Its security is WEP/WPA-PSK/WPA2-PSK
    • Its power supply voltages are 3 to 3.6V.
    • Its current value is >500mA.
    • Its operating temperature is -20 to 85-degree centigrade.
    • Its storage environment is -40 to 85-degree centigrade.
    • Its default baud rate is 115200.
    • It has a TTL serial port level.
  • -14%
    Quick View

    Esp Adaptor with Temp Sensor

    (0)
    Original price was: ₨640.00.Current price is: ₨550.00.

    ESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.

  • -8%
    Quick View

    ESP-01 Adapter Module 3.3-5V

    (0)
    Original price was: ₨270.00.Current price is: ₨249.00.
    • For Arduino series motherboards or compatible motherboards can be used directly.
    • Power supply voltage: 5V
    • Module operating current: 240mA (max.)
    • Baud rate: Default 115200, can be modified by command
    • Wireless network mode: station / softAP / SoftAP + station
    • Wireless standard: 802.11 b / g / n
    • WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
    • With a command set, and simple development, start quickly
    • Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
  • -40%
    Quick View

    ESP-12E WiFi Module

    (0)
    Original price was: ₨500.00.Current price is: ₨299.00.
    • Added six I/O serial and six SPI serial
    • Support wireless 802.11 b/g/n standard
    • Support the STA/AP/STA AP three work modes
    • Built-in TCP/IP protocol stack, and support multiple TCP Client connection
    • Support rich Socket the AT command
    • Support UART/GPIO data communication interface
    • Support Smart Link intelligent networking
    • Support remote firmware update (OTA)
  • -27%
    Quick View

    ESP32 CAM MB USB Programmer Board CH340G USB To Serial Port

    (0)
    Original price was: ₨480.00.Current price is: ₨349.00.

    • Driver Compatibility: Requires CH340G driver installation for proper operation.

    • Supported Devices: Compatible with all ESP32-CAM boards.

    • Button Types: Includes Reset and Boot buttons.

    • LED Indicators: Power status indication.

  • -38%
    Quick View

    ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3

    (0)
    Original price was: ₨2,400.00.Current price is: ₨1,499.00.
    • 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
    • Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
    • Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
    • Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
    • Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
    • Bluetooth 5 (LE)
    • 45 programmable GPIOs
    • No integrated ethernet MAC
    • 2 × 12-bit SAR ADCs, up to 20 channels
    • USB OTG
  • -43%
    Quick View

    ESP32 WROOM-32 38-pins Wifi+Bluetooth MCU Module

    (3)
    Original price was: ₨2,000.00.Current price is: ₨1,139.00.
    • CPU Tensilica Dual-Core 32-bit 240 MHz LX6 processors, integrated 520 Kb SRAM
    • Wifi 802.11 b/g/n/e/i
    • Bluetooth v4.2 BR/EDR and BLE
    • Memory 4 MByte Flash
    • Temperature Range -40 to 125 Deg C.
  • -33%
    Quick View

    ESP32 WROOM-32 Wifi+Bluetooth MCU Module 30 Pin

    (1)
    Original price was: ₨1,500.00.Current price is: ₨999.00.
    1. Single or Dual-Core 32-bit LX6 Microprocessor with clock frequency up to 240 MHz.
    2. 520 KB of SRAM, 448 KB of ROM and 16 KB of RTC SRAM.
    3. Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
    4. Support for both Classic Bluetooth v4.2 and BLE specifications.
    5. 34 Programmable GPIOs.
    6. Up to 18 channels of 12-bit SAR ADC and 2 channels of 8-bit DAC
    7. Serial Connectivity includes 4 x SPI, 2 x I2C, 2 x I2S, 3 x UART.
    8. Ethernet MAC for physical LAN Communication (requires external PHY).
    9. 1 Host controller for SD/SDIO/MMC and 1 Slave controller for SDIO/SPI.
    10. Motor PWM and up to 16 channels of LED PWM.
    11. Secure Boot and Flash Encryption.
    12. Cryptographic Hardware Acceleration for AES, Hash (SHA-2), RSA, ECC and RNG.
  • -28%
    Quick View

    ESP32-CAM WiFi + Bluetooth Camera Module

    (4)
    Original price was: ₨1,900.00.Current price is: ₨1,375.00.
    • Module Model: ESP32-CAM
    • Package: DIP-16
    • Size: 2740.54.5(?0.2)mm
    • SPI Flash: Default 32Mbit
    • RAM: Internal 520KB + External 4M PSRAM
    • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
    • Wi-Fi: 802.11 b/g/n/e/i
    • Support Interfaces: UART, SPI, I2C, PWM
    • TF Card Support: Maximum 4G
    • IO Port: 9
    • Serial Port Rate: Default 115200 bps
    • Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
    • Antenna: Onboard PCB antenna with a gain of 2dBi
    • Power Supply Range: 5V
    • Operating Temperature: -20°C to 85°C
  • -47%
    Quick View

    ESP8266 ESP-01 WiFi Module

    (1)
    Original price was: ₨600.00.Current price is: ₨319.00.
    • 802.11 b/g/n
    • Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP Protocol Stack
    • Integrated TR switch, balun, LNA, power amplifier, and matching network
    • Integrated PLLs, regulators, DCXO, and power management units
    • +19.5dBm output power in 802.11b mode
    • Power down leakage current of <10uA
    • 1 Mb flash memory
    • Integrated low-power 32 bit CPU could be used as an application processor
    • SDIO 1.1/ 2.0, SPI, UART
    • STBC, 1×1 MIMO, 2×1 MIMO
    • A-MPDU and A-MSDU aggregation and 0.4ms guard interval
    • Wake up and transmit packets in <2ms
    • Standby power consumption of <1.0mW(DTIM3)
  • -30%
    Quick View

    ESP8266 ESP12E -NODEMCU – CH340

    (3)
    Original price was: ₨799.00.Current price is: ₨559.00.
    • Input Voltage: 2.5 ~ 3.6V
    • Operating Voltage: 3.3V
    • CPU: 32-bit RISC Tensilica Xtensa LX106 running at 80 MHz
    • 64 KB of instruction RAM, 96 KB of data RAM (80x Arduino UNO!)
    • 512 KB of EEPROM (512x Arduino UNO!)
    • External QSPI flash – 512 KB to 4 MB* (up to 16 MB is supported)
    • IEEE 802.11 b/g/n Wi-Fi
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • WEP or WPA/WPA2 authentication, or open networks
    • Digital I/O Pins (DIO): 16
    • Analog Input Pins (ADC): 1
    • UARTs: 1 on dedicated pins, plus a transmit-only UART can be enabled on GPIO2
    • SPIs: 1
    • I2Cs: 1
    • Flash Memory: 4 MB
    • SRAM: 64 KB
    • Clock Speed: 80 Mhz
    • 80 Mhz clock (5x arduino UNO or mega!)
  • -8%
    Quick View

    ESP8266 NodeMCU V1.0 ESP-12E WiFI Module

    (0)
    Original price was: ₨400.00.Current price is: ₨369.00.
    • Microcontroller:      ESP-8266 32-bit
    • Clock Speed:             80 MHz
    • USB Converter:        CP2102
    • USB Connector:       Micro USB
    • Operating Voltage:  3.3V
    • Flash Memory:         4 MB
    • Digital I/O:                11
    • Analog Inputs:          1
    • Communications:     Serial, SPI.  I2C and 1-Wire via software libraries
    • WiFi:                           Built-in 802.11 b/g/n
  • -18%
    Quick View

    ESP8266 Witty Cloud ESP-12F WiFi Module

    (0)
    Original price was: ₨1,099.00.Current price is: ₨899.00.
    1. LDR Light Sensor on board.
    2. WS2812 Led on board.
    3. Includes CH340G USB-to-UART programmer.
    4. Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin.
    5. Supports 3 modes: AP, STA, AP+STA.
    6. Dimensions: 24mm x 16mm.
    7. Micro USB connection for power and/or programming
  • -39%
    Quick View

    NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE

    (2)
    Original price was: ₨1,099.00.Current price is: ₨669.00.
    • Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
    • USB micro USB port for power, programming, and debugging
    • Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
    • Misc Reset and Flash buttons
    • Power 5V via micro USB port
    • Dimensions 49 x 24.5 x 13mm
  • -30%
    Quick View

    Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board

    (1)
    Original price was: ₨1,500.00.Current price is: ₨1,049.00.
    1. Universal low power IoT sensor hub.
    2. Home automation.
    3. Universal low power IoT recorder.
    4. Mesh network.
    5. Video streaming of the camera.
    6. Industrial wireless control.
    7. OTT TV box / set-top box device.
    8. Baby monitor.
    9. Smart Socket.
    10. Sensor networks.
    11. Wi-Fi toys: Counters, toys, Anti-lost device.
    12. Wearable electronic products.
    13. Wi-Fi speech recognition device.
    14. Wi-Fi location-aware devices.
  • -13%
    Quick View

    R307 Finger Print Sensor (R-307)

    (1)
    Original price was: ₨4,000.00.Current price is: ₨3,499.00.
    1. Supply voltage: DC 4.2 ~ 6.0V
    2. Working current: 50mA (typical)
    3. Peak current: 80mA
    4. Fingerprint image input time: <0.3 seconds
    5. Window area: 14×18 mm
    6. Comparison method: (1: 1)
    7. Search method: (1: N)
    8. Characteristic file: 256 bytes
    9. Template file: 512 bytes
    10. Storage capacity: 1000 pieces
    11. Security Level: Five (from low to high: 1,2,3,4,5)
    12. Fake rate (FAR): <0.001%
    13. Refusal rate (FRR): <1.0%
    14. Search time: <1.0 seconds (1: 1000 hours, mean value)
    15. Host interface: UART, USB1.1
    16. Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
    17. Working environment: Temperature: -20 ℃ – +40 ℃
    18. Relative humidity: 40% RH-85% RH (no condensation)
    19. Overall Size: 4.5×2.4x2cm